APSP Members Reporting Covers Tested in Compliance with ASME/ANSI A.112.19.8 Standard 2007 The following APSP members report that they have covers that have been tested and found in compliance with ASME/ANSI A.112.19.8, Suction Fittings for Swimming and Wading Pools, Spas, Hot Tubs, and Whirlpool Bathtub Appliances IMPORTANT: The companies listed below are not employees or agents of the APSP and APSP makes no representation with regard to whether one or more products manufactured by the following companies comply with ANSI/ASME A.112.19.8, Suction Fittings for Swimming and Wading Pools, Spas, Hot Tubs, and Whirlpool Bathtub Appliances, or any other relevant standards. APSP assumes no liability in the event any information listed below is incorrect. A&A Manufacturing, A Division of Shasta 3750 West Indian School Road Phoenix, AZ 85019-1844 Tel 602.532.3864 Michael Marshall Michael.Marshall@aamfg.com www.unblockabledrain.com AquaStar Pool Products, Inc. 1666 Garnet Ave #224 San Diego, CA 92109 Fax 877.276.POOL (7665) info@aquastarpoolproducts.com www.aquastarpoolproducts.com Wade Arens-Technical Support Tel 877.768.2717, ext 2 Olaf Mjelde-National Sales Manager Tel 877.768.2717, ext 1 Cheryl Salla-Florida Sales Manager Tel 877.768.2717 ext 6 Mark Barnes-East Coast Sales Manager
Tel 877.768.2717, ext 7 Fred Blanchard-Warm Water Sales Group ME to NC Tel 413.567.0750 BeeSafe Systems, LLP 795 W. Center Street #2 Provo, UT 84601 Tel. 801.375.6881 Toll Free 888.306.0121 Fax 801.691.5761 Bonnie Snow beesafesystems@gmail.com www.beesafesystems.com Custom Molded Products, Inc. 140 Celtic Blvd. Tyrone, GA 30290 Tel 770.6327112 Fax 770.632.7115 Pool Division: Rich Simpson rsimpson@c-m-p.com Spa Division: Bob Moore bmoore@c-m-p.com Hayward Pool Products 61 WhiteCap Drive North Kingstown, RI 02852 Joe DiOrio Product Manager Lighting and White Goods Tel Office 401.583.1107 Fax 401.583.1407 jdiorio@haywardnet.com www.haywardnet.com www.haywardnet.com/inground/products/displayprod.cfm?productid=230 www.haywardnet.com/safety/ Paddock Pool Equipment Company, Inc. PO Box 11676 (29731) 555 Paddock Parkway Rock Hill, SC 29730 Tel 803.324.1111 Fax 803.324.1116
www.paddockindustries.com www.approvedmaindrains.com info@paddockindustries.com Paramount Pool and Spa Systems 295 E. Corporate Place, #100 Chandler, AZ 85225 Tel 480.893.7607 www.1paramount.com Bill Burt Director of Sales and Marketing bburt@1paramount.com Fax 480.753-3397 The Patterson Companies 1685 Westbelt Drive Columbus, OH 43228 Tel 614.876.2628 Fax 614.876.2495 Tim Patterson tpatterson@pattersonpools.com www.pattersonpools.com San Antonio Gary Equipment Company, Inc. 438 Sandau Road San Antonio, TX 78216-3621 Tel 210.341.5255 Fax 210.341.5154 www.garyequipment.com Tassie Zars retro@garypools.com Triodyne Safety Systems, LLC 3054 North Lake Terrace Glenview, IL 60025 Tel 847.486.9640 F 847.486.9645 www.antihairsnare.com Vicki Lipinski vlipinski@triodyne.com Waterway Plastics 2200 E. Sturgis Rd. Oxnard, CA. 93030
(805) 981-0262 Ray Mirzaei, C.E. waterway@waterwayplastics.com www.waterwayplastics.com Automatic Pump Shut-Off Systems The following APSP members report that they have automatic pump shut-off systems tested and certified to the ASME A112.19.17 standard, Manufactured Safety Vacuum Release Systems (SVRS) for Residential and Commercial Swimming Pool, Spa, Hot Tub and Wading Pool Suction Systems. Emotron Inc. 6535 Weatherfield Court Maumee, OH 43537 Tel 866-663-9060 Fax 419-866-1506 Paul Hackett www.usa-emotron.com paul.hackett@usa-emotron.com APSP Members Reporting Safety Vacuum Release Systems (SVRS) Tested in Compliance with ASME/ANSI A.112.19.17 Standard or ASTM F2387 The following APSP members report that they have safety vacuum release systems (SVRS) that have been tested and found in compliance with ASME/ANSI A.112.19.17, Manufactured Safety Vacuum Release Systems (SVRS) for Residential and Commercial Swimming Pool, Spa, Hot Tub and Wading Pool Suction Systems, or ASTM F2387, Standard Specification for Manufactured Safety Vacuum Release Systems, Swimming Pools, Spas, and Hot Tubs. IMPORTANT: The companies listed below are not employees or agents of the APSP and APSP makes no representation with regard to whether one or more products manufactured by the following companies comply with ASME/ANSI A.112.19.17, Manufactured Safety Vacuum Release Systems (SVRS) for Residential and Commercial Swimming Pool, Spa, Hot Tub and Wading Pool Suction Systems, or ASTM F2387, Standard Specification for Manufactured Safety Vacuum Release Systems, Swimming Pools, Spas, and Hot Tubs, or any other relevant standards. APSP assumes no liability in the event any information listed below is incorrect. A.O. Smith EPC 531 North Fourth Street Tipp City, OH 45371 http://www.aosepc.com/products/emod/
Midwest and Northeast Greg Fritz Tel 937.609.6342 Florida / Southeast John Alexander Tel 813.335.0879 West Bill DeCorrevont Tel 602.300.4664 Hayward Pool Products 61 WhiteCap Drive North Kingstown, RI 02852 Joe DiOrio Product Manager Lighting and White Goods Tel Office 401.583.1107 Fax 401.583.1407 jdiorio@haywardnet.com www.haywardnet.com www.haywardnet.com/inground/products/displayprod.cfm?productid=230) www.haywardnet.com/safety/ Pentair Water Pool and Spa 1620 Hawkins Ave. Sanford, NC 27330 800.831.7133 Rob Stiles rob.stiles@pentairwater.com http://www.pentairpool.com/whatsnew/svrs.htm http://www.pentairpool.com