CTAG:e43bda4f8e48714fbb aefb192 Certificate of Calibration

Similar documents
CTAG:b9927e36a4b3f34a9138ce0bb2426b22 Certificate of Calibration

CALIBRATION CERTIFICATE # 500

Vaisala Pressure, RH & Temp. Transmitter. The instrument was operational upon receipt. The instrument was adjusted and calibrated.

Metering Code Gas TSO, measurement by connected party Effective from to the present

LM LUMEN MAINTENANCE TEST REPORT

Title: INSTRUMENT AND EQUIPMENT DOCUMENTATION AND RECORDS

Light Lab. Reliable Measurements through Regular Calibration. DAkkS

Distribution of fishing intensity of pulseand beam trawling in the North Sea. Marcel Machiels. IMARES rapport C146A/15

GMC-I Service GmbH Calibration Center

HUMOR 20. High Accuracy Humidity Calibrator. Water T, p1 HUMOR 20 V1.0

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)

General European OMCL Network (GEON) QUALITY MANAGEMENT DOCUMENT

Requirements and Methods for Calibration of Equipment in Clinical Laboratories. NK Chan (HKRCBTS) 24 August 2007

VT900. Gas Flow Analyzer. Technical data. Key benefits and features:

Supersedes: The copy of this document located on Measurement Canada s website is considered to be the controlled copy.

HUMOR 20 HUMOR 20. High-precision Humidity Calibrator. Water T, p1

VT650. Gas Flow Analyzer. Technical data. Key benefits and features:

Requirements for the certification of movements and mechanical watches resistant to magnetic fields of 1.5 T ( G)

20. Technical Equipment. Archived. This section applies to all equipment used in forensic examinations, such as

VT900A + VAPOR. Technical data. One Solution. Auto-detection to Ensure Patient Safety. Key benefits and features

HUMOR 20. High-precision Humidity Calibrator HUMOR 20. Operation

SmartCal. SmartCal Troubleshooting Checklist

Recalibration of gas meters

Transferpette -8/-12

Transferpette. Testing Instructions (SOP) 1. Introduction. May 2009

Technical Report. 5th Round Robin Test for Multi-Capillary Ventilation Calibration Standards (2016/2017)

Recommended Practices for Calibration Laboratories

2014 Programme of Training Courses in Measurement & Calibration

Routine Testing. SOP Temperature Calibration of Halogen Moisture Analyzer. Applicable for HR / HG / HB / MJ Moisture Analyzers

Unique mounting features for Thermal Mass Flow Meters. By Martin Raab in cooperation with CaTeC b.v.

Installation Procedure Esco Miri Multi-Room Incubator

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

User-Calibration of Mettler AT200 Analytical Balance

Certification of AMS acc. EN 15267, Part 3 - Overview and First Experience -

PRODUCT CONFORMITY CERTIFICATE

NMISA NEW GAS FLOW CALIBRATION FACILITY. Deona Jonker 7 October 2013

tradition. knowledge. responsibility. CALIBRATION OF ELECTRICAL MEASUREMENT EQUIPMENT CALIBRATION LABORATORY

Procedia Engineering Procedia Engineering 2 (2010)

Specific Accreditation Criteria Calibration ISO IEC Annex. Mass and related quantities

IESNA LM MEASURING LUMEN MAINTENANCE OF LED LIGHT SOURCES MEASUREMENT AND TEST REPORT. For

CALIBRATION SERVICES HUMIDITY DEW POINT AIR VELOCITY MASS FLOW TEMPERATURE CO 2 PRESSURE. (+34)

TEST REPORT. ACCORDING TO IES LM For. Samsung Electronics Co., LTD. 1,Samsung-Ro,Giheung-Gu,Yongin-City,Gyeonggi-Do 17113, Korea

PPC4E Pressure Controller/Calibrator Superior rangeability and reliability

CORESTA RECOMMENDED METHOD N 6

DATA ITEM DESCRIPTION Title: Failure Modes, Effects, and Criticality Analysis Report

VITLAB micropipette. Standard Operating Procedure (SOP)

Rigel 601 CHECKBOX. Instruction Manual. 348A551 Issue 2.0. April Seaward Electronic Ltd. Issue 2.0

General Accreditation Guidance. User checks and maintenance of laboratory balances

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

DeFelsko PosiTector CMM IS Probe

technical guide Laboratory Balances Calibration Requirements

DeFelsko PosiTector Dew Point Meter DPM & DPMD Probes

Service Calibration are you doing it properly?

Tradinco Academy Courses Program

Guide No. 2/2009. Design, training and equipment Martin Firlus. Physikalisch Technische Bundesanstalt Braunschweig und Berlin

tr-- CALIBRATION CERTIFICATE Calibration Laboratory of Schmid & Partner Engineering AG Zeughausstrasse 43, 8004 Zurich, Switzerland DSGHzV2 - SN:1006

Portable Gas Analyzers

Gas flow calibrations performed at the National Metrology Institute of South Africa (NMISA)

CADWELL INDUSTRIES, INC. TEST REPORT FOR THE ELECTRONEURODIAGNOSTIC MONITORING SYSTEM, EASY WIRELESS EEG

Beamex. Calibration White Paper. Weighing scale calibration - How to calibrate weighing instruments

Balancing and Settlement Code. Code of Practice Four

Brooks Flow Controllers for Gas and Liquid Service Model FC 8744, Series FC 8800 and FC 8900

Elcometer ISO Groove Depth Checker. Operating Instructions

New ANSI Fall Protection Standards

Technical Datasheet ZHA Series Gear Flow Meters Aluminum Version with ball bearing for lubricating media

Test Report #: Date: June 21, 2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z CALIBRATION

Speciality Gases Practice 4. Our quality, your safety. Accredited Test and Calibration Laboratory Speciality Gases Centre in Hörstel.

Pneumatic high-pressure controller Model CPC7000

TR Test Report Complementary Testing RKN e1 Container (+5 C) Protection by Insulation Version: 01 Page: 2 (22)

Calibration Summary of Test Report No.: Sample

P3000 Series. Pneumatic Deadweight Testers Model P3000. Technical Data. Features

ali-q TM Gravimetric Verification Procedure

SKSTEX36(SQA Unit Code-H7C9 04) Calibrate textile production equipment

AGILENT TURBOMOLECULAR PUMPS MEASUREMENT METHODOLOGY

How to evaluate pressure measurement specifications

Pressure is our Business

Certificate of Accreditation

Gas mixtures. Individual solutions specifically for your application

CALIBRATION SYSTEM REQUIREMENTS. ESCC Basic Specification No

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

Fall Protection. ANSI-What is it, Why is it important? Craig Firl. March 5 th, Company Private

EN ISO/IEC Technical Requirements

Standard Operating Procedure Measuring & Testing Equipment

The World Of Weather Data

IESNA LM MEASURING LUMEN MAINTENANCE OF LED LIGHT SOURCES MEASUREMENT AND TEST REPORT. For

ISO Vacuum gauges Calibration by direct comparison with a reference gauge

MET-101 Introduction to Metrology

STD-3-V1M4_1.7.1_AND_ /15/2015 page 1 of 6. TNI Standard. EL-V1M4 Sections and September 2015

973-SF 6 Analyzer. Precise and Stable SF 6 Gas Analyzer REFLECTING YOUR STANDARDS

TEXAS DEPARTMENT OF PUBLIC SAFETY Breath Alcohol Laboratory

WBEA Standard Operating Procedure

Certificate of Accreditation

Pressure Calibrators. Series PC..., PM...

KENYA ACCREDITATION SERVICE

Calibration Procedure

The above item, as tested, is considered to comply with the above specifications. PAGE 1 OF 6

GAS TRANSPORTER S REQUIREMENTS FOR GAS MEASUREMENT SYSTEMS CONNECTED TO THE NATIONAL GRID GAS NETWORK

Maximum precision for quantifiable success.

Pressure Equipment Directive PED 2014/68/EU Commission's Working Group "Pressure"

Transcription:

CTAG:ebdaf8e87fbb5996aefb9 Certificate of Calibration Data Type: FOUND-LEFT Certificate No: 6858 Instrument Description Manufacturer Model Serial Number Inventory Number CABLE ANALYZER FLUKE NETWORKS DTX-8 9787-9787 L76 Customer Name City Site Number OMIKRON LTD. BUDAPEST 889 Order Number RMA Number 66557 Environmental Conditions Temperature within Humidity within (. ±.) C (5 ± ) %rh Calibration Procedure Excel Certificate and traceability procedure (.) Results The instrument meets its specifications at all points measured. The results of the measurements are shown on page through 5 Date of Calibration Jun 6 Issue date: Jun 6 Date of Recalibration Jun 7 Place of Calibration Tested by Son W.H.J. van Hulten G.J.J. Sprik Head of laboratory This calibration is performed by a DEKRA certified lab for ISO 9:8. All measurements are traceable to national and/or international standards or have been derived by approved ratio techniques. When possible standards used for this calibration are ISO/IEC 75:5 accredited calibrated. This certificate may not be reproduced other than in full. Calibration certificates without signature are not valid. Fluke Nederland B.V. Science Park Eindhoven 58, 569 EC Son Tel: + () 675 E-mail: servicedesk@fluke.com Page: of 5

Certificate of Calibration Data Type: FOUND-LEFT Certificate No: 6858 Remarks - The data type found in this certificate on the top of each page must be interpreted as: As-Found As-Left Found-Left : Calibration data collected before the unit is adjusted and / or repaired : Calibration data collected after the unit has been adjusted and / or repaired : Calibration data collected without any adjustment and / or repair performed - If the unit under test is used under rough conditions we recommend to decrease the calibration interval period, the calibration interval (due date) is the responsibility of the end user; - According to the European norm 'Operation of electrical installations' NEN-EN 5- release 5 and the Dutch norm NEN release paragraph 5.. through 5..6, is a safety test not required. Therefore not performed. Standards and test-equipment used for this calibration: Model Serial No Inventory No Due to Certificate No DTX ARTIFACT SET WP6 WP6 Oct 6 89 FTE895 575 WP758 7 Sep 6 57 Date of Calibration: Jun 6 Page: of 5

Main DTX-8 9787 Test Date 6 6 Remote DTX-8R 9787 Test Pgm UluTest v.. -Jun- Main Insertion Loss FEXT/IL Artifact SN 86.5.5.5 5 6 7 8 9 Pass Worst margin:.57 at MHz in pair 78. Worst accuracy at each frequency shown. Main FEXT FEXT/IL Artifact ID 86 5 6 7 8 9 Pass Worst margin:.8 at.875 MHz in pair -5. Worst accuracy at each frequency shown. Main NEXT NEXT Ver Artifact ID 787 6 5 5 6 7 8 9 Pass Worst margin:.68 at 57 MHz in pair 6-5. Worst accuracy at each frequency shown. Measurement accuracy requirement for nominally compliant Level IV field testers. Measured difference of DTX and reference laboratory equipment added to measurement accuracy of reference laboratory equipment. Worst accuracy at each frequency shown. Estimated accuracy of reference laboratory equipment. 6 6 : PM Page of 5

Main DTX-8 9787 Test Date 6 6 Remote DTX-8R 9787 Main Return Loss RL Ver Artifact ID 788.5.5.5.5 5 6 7 8 9 Pass Worst margin:.6 at 6 MHz in pair 78. Worst accuracy at each frequency shown. Remote NEXT NEXT Ver Artifact ID 787 5 Data not available 5 6 7 8 9 Pass Worst margin:.657 at 6 MHz in pair 6-5. Worst accuracy at each frequency shown. Remote Return Loss RL Ver Artifact ID 788.5.5.5.5 5 6 7 8 9 Pass Worst margin:.9 at 59 MHz in pair 5. Worst accuracy at each frequency shown. Measurement accuracy requirement for nominally compliant Level IV field testers. Measured difference of DTX and reference laboratory equipment added to measurement accuracy of reference laboratory equipment. Worst accuracy at each frequency shown. Estimated accuracy of reference laboratory equipment. 6 6 : PM Page of 5

Main DTX-8 9787 Test Date 6 6 Remote DTX-8R 9787 Propagation Delay Cable Artifact Sn 575 Standard Meas Deviation Allow Dev Units Result Pair 7. 69.67 -.. ns Pass Pair 6 6. 6.6 -.8. ns Pass Pair 5 59. 57. -.6. ns Pass Pair 78 56. 5.6 -.. ns Pass Report version..59 6 6 : PM Page 5 of 5