DENTAL PRODUCT CATALOG

www.mastercuttool.com DENTAL PRODUCT CATALOG VOL. 2

2 Mastercut Tool Corp. has been providing tools and services to the Solid Carbide Cutting Tool industry for over 25 years. Visit www.mastercuttool.com for details about the wide range of products and services offered. Terms and Conditions of Sale: To Order: Orders may be faxed or e-mailed in, however online ordering is also available. For online ordering setup, please contact our customer service department. When placing your order, please specify quantity and EDP numbers. Minimum Orders: $50 for standard items, $200 for special orders. Orders below $50 are subject to a $7.50 handling fee. Standard Payment Terms: Overseas customers: Prepaid. US customers: Due upon receipt. Open accounts can be established under certain conditions. Freight: Orders totaling $1500 or more are shipped freight prepaid barring any special labeling or etching requirements. Freight is F.O.B. shipping point. A 1.5% special marking fee is available as an option to receive prepaid freight for privately marked orders exceeding $1500. Prepaid freight only applies to ground shipments within the US. Return Policy: We do not accept returns on items which we do not maintain in stock. Returns are subject to a 15% re-stocking fee. No returns will be accepted beyond 6 months from date of shipment. Products in this catalog are subject to change without notice. Why use a Coating? Carbide tool s life increases 2 to 5 times. Deposition temperatures as low as 480-840 F (250-450 C) protect carbide s binder from deterioration, by comparison with the CVD process applied at more than 1,850 F (1,000 C). Isolates the tool from the part, avoids edge buildup and tool cratering. Reduces friction against workpiece and chips, reduces spindle torque, less vibration, better finish. Speed and Feed increases from 10 to 50 percent. Reduces or eliminates coolant (with specific coatings). Repeatable, stable performance of the coatings between batches. Table of Contents: Dental and Medical HP Carbides Page 3 Dental Lathe Burs Page 4-5 Burs for Flexible Partials Page 6 Dental Milling Burs Page 6-9 Diamond Discs Page 9 Dental Diamonds Page 10-11 Electric Handpiece Motor Set Page 12 Special Services: Special Tooling for Your Requirements: When you need a non-standard tool for a specific job, give us a call. Requirements for special tooling or modifications of existing standard items will be given prompt, expert attention. Resharpening: Mastercut Tool Corp. employs skilled craftsmen and advanced equipment to provide excellent resharpening services. We can sharpen dull cutters regardless of the manufacturer. This is an excellent and efficient way to get new tool performance at a fraction of the cost. Prices for resharpening Mastercut tools are noted in this Catalog, for other tools please inquire about our resharpening prices. Recoating: Along with the ability to resharpen, Mastercut Tool Corp. also provides recoating options on most of our tools. For more information, call or email us. Coating options: is Mastercut Tool Corp s new proprietary coating that surpasses the proven performance of AlTiN for superior extreme machining results. With a thermal stability above 1,600 F (900 C) this coating excels in high speed dry machining applications. Harder than our original AlTiN by 1000 HV, with an increase in thermal stability of 200 F (100 C), will ensure that heat buildup, friction, and edge breakdown are all greatly reduced, resulting in better cutting performance and longer tool life. As with it s predecessor, will be an excellent coating for applications involving tough-to-cut tool steels, stainless, cast iron and non-ferrous material, and it can also be used very effectively for interrupted cuts. can be run at more aggressive speeds and feeds than other coatings, and can be run without coolant in specific applications. continues to be the coating of choice for tough-to-cut materials. Hardness: 3800 HV, Coating Thickness: 2-4 Microns, Thermal Stability: 1,650 F or 900 C. PowerZ Zirconium Nitride (ZrN) Coating has proven itself over the years in many industries. ZrN s characteristics have made it suitable for applications where TiN has not performed well. It has excellent erosion resistance, good lubricity and ductility combined with an attractive appearance to make it stand out from the all the rest. This coating has worked well in all nonferrous applications. Recommended Applications: Aluminum, Brass, Cast Iron, Graphite, Ni Alloys, Ti Alloys, 300/PH Series Stainless Zinc, Glass-filled Plastics (Not recommended for carbon steels). Coating Characteristics: Thickness (2-5 microns), Hardness (2800 Vickers), Thermal 1,049 F (550 C), Lubricity (0.5 coefficient of friction). Titanium Nitride (TiN) Coating is bright gold in color, has an ambient temperature hardness in the 2800 Vickers (low 80Rc) range, a coefficient of friction under 0.5, and a thermal stability up to about 1000 F. TiN meets FDA requirements for surgical tools and food applications. Cutting speeds, feeds, wear resistance and tool life generally improve. Power DLC (diamond like coating) offers the highest hardness, the smoothest surface, and a very low coefficient of friction. This specialty coating is used primarily for cutting tools used in composite materials with an affinity for sticking. It gives the closest performance to real diamond coatings, but in a thin layer form. PowerZ coating also available at the same price as and coatings, as per the specific bur. Power DLC available on requst, please call for more info. All of our burs are available with advanced PVD coatings.

Dental and Medical HP Carbides Resharpening Prices for Regular, Fine and Coarse cuts below: : $10.80 or : $12.91 z Chipbreaker Cut (Regular) $18.00 $21.51 $21.51 52-C 52-D 53-A 63-B 82-T 84-T 83-E 83-EE 88-A 47-X 73-C 51-A 61-A/81-A Diamond Cut (Fine) $18.00 $21.51 $21.51 52-C/XF 52-D/XF 53-A/XF 63-B/XF 82-T/XF 84-T/XF 83-E/XF 83-EE/XF 88-A/XF 47X/XF 73-C/XF 51-A/XF 61-A/81-A/XF $18.00 $21.51 Doublecut (Coarse) $21.51 52-C/XC 52-D/XC 53-A/XC 63-B/XC 82-T/XC 84-T/XC 83-E/XC 83-EE/XC 88-A/XC 47X/XC 73-C/XC 51-A/XC 61-A/81-A/XC Chipbreaker Cut Carbide Dental Burs HP Shank 1/8 Head (Fractional), 3mm Head (Metric) Resharp: : $9.00 or : $10.09 44-C 44-CM 41-P 41-PM $15.00 $16.81 $16.81 Type Description 44-C 1/8 x 9/16 x.0925 x 1-1/2 Cylinder 41-P 1/8 x 5/8 x.0925 x 1-1/2 Cone Shape 44-CM 3 x 14 x.2.35 x 38 Cylinder (Metric) 41-PM 3 x 16 x 2.35 x 38 Cone Shape (Metric) Dental Bur Part IDs: 1: Begin with DEN 2: Indicate bur shape and cut type (without dashes or slashes) 3: Indicate coating if desired For Example: For Type 52-C with a Diamond Cut and a Coating, the part number would be DEN52CXFTA Fastmill (Aluma Cut) Resharp: : $14.40 or : $16.51 84-T/SP 88-A/SP Dental Step-Drills $16.00 $17.81 $17.81 Resharp: : $9.60 or : $10.69 EDP# 35-0780 $24.00 $27.51 $27.51 (Metric) OD1xOD2xLOC1xLOC2xShankxOAL 35-0780 1.95 x 3 x 5.75 x 6.2 x 3 x 35 Step Drill Bur Coating IDs = TA = TN PowerZ = ZrN HP Shank Carbide Dental Bur Dimensions Type OD x LOC x Shank x OAL ODxLOCxshankxOAL 52-C 1/4 x 3/8 x.0925 x 1-7/8 6.3x9.5x2.35x48 52-D 1/4 x 1/4 x.0925 x 1-3/4 6.3x6.3x2.35x45 53-A 1/4 x 1/2 x.0925 x 2 6.3x12.7x2.35x50 63-B 1/4 x 1/2 x.0925 x 2 6.3x12.7x2.35x50 82-T 1/4 x 5/8 x.0925 x 2 6.3x12.7x2.35x50 84-T 1/4 x 1/2 x.0925 x 2 6.3x12.7x2.35x50 83-E 1/4 x 1/2 x.0925 x 2 6.3x12.7x2.35x50 88-A 1/4 x 1/2 x.0925 x 2 6.3x12.7x2.35x50 47/X 5/32 x 1/2 x.0925 x 2 4x12.4x2.35x50 73-C 1/4 x 1/4 x.0925 x 1-3/4 6.3x6.3x2.35x45 61-A/81-A 1/4 x 1/2 x.0925 x 2 6.3x12.7x2.35x50 51-A 3/16 x 3/8 x.0925 x 1-7/8 5x9.5x2.35x48 84-T/SP 1/4 x 1/2 x.0925 x 2 6.3x12.7x2.35x50 88-A/SP 1/4 x 1/2 x.0925 x 2 6.3x12.7x2.35x50 All our burs are precision ground on state of the art CNC machines for smooth operation. All Dental Burs Shank Tolerance +.0000 -.0005 3

Dental Lathe Burs (1/4 Shank fractional and 6mm Shank metric) Fractional Metric Fractional Metric Fractional Metric Chipbreaker Cut Resharp: : $16.80 or : $21.01 Doublecut Fastmill (Aluma Cut) Chipbreaker Cut $35.00 $42.02 A 3/8 B 3/8 C 3/8 D 3/8 E 3/8 F 3/8 $42.02 A 1/2 B 1/2 C 1/2 D 1/2 E 1/2 F 1/2 A-095 B-095 C-095 D-095 E-095 F-095 A-127 B-127 C-127 D-127 E-127 F-127 Resharp: : $18.00 or : $22.21 Doublecut $37.50 $44.52 A 3/8XC B 3/8XC C 3/8XC D 3/8XC E 3/8XC F 3/8XC $44.52 A 1/2XC B 1/2XC C 1/2XC D 1/2XC E 1/2XC F 1/2XC A-095 B-095 C-095 D-095 E-095 F-095 A-127 B-127 C -127 D-127 E-127 F-127 Resharp: : $19.80 or : $24.01 Resharp: : $21.00 or : $26.74 Resharp: : $22.20 or : $27.94 Fastmill (Aluma Cut) Resharp: : $25.20 or : $30.94 $41.25 $48.27 A 3/8FM B 3/8FM C 3/8FM D 3/8FM E 3/8FM F 3/8FM A 1/2FM B 1/2FM C 1/2FM D 1/2FM E 1/2FM F 1/2FM A -095 B-095 C-095 D-095 E-095 F-095 $48.27 A-127 B-127 C-127 D-127 E-127 F-127 $43.75 $53.31 $53.31 $46.25 $55.81 $55.81 $52.25 $61.81 $61.81 4 Coated Coated TYPE OD x LOC x Shank x OAL Chipbreaker Doublecut Fastmill Chipbreaker Doublecut Fastmill Chipbreaker Doublecut Fastmill A-3/8 3/8 x 3/4 x 1/4 x 2-1/2 DENA3/8 DENA3/8XC DENA3/8FM DENA3/8TN DENA3/8XCTN DENA3/8FMTN DENA3/8TA DENA3/8XCTA DENA3/8FMTA B-3/8 3/8 x 1-1/16 x 1/4 x 2-13/16 DENB3/8 DENB3/8XC DENB3/8FM DENB3/8TN DENB3/8XCTN DENB3/8FMTN DENB3/8TA DENB3/8XCTA DENB3/8FMTA C-3/8 3/8 x 3/4 x 1/4 x 2-1/2 DENC3/8 DENC3/8XC DENC3/8FM DENC3/8TN DENC3/8XCTN DENC3/8FMTN DENC3/8TA DENC3/8XCTA DENC3/8FMTA D-3/8 3/8 x 5/8 x 1/4 x 2-3/8 DEND3/8 DEND3/8XC DEND3/8FM DEND3/8TN DEND3/8XCTN DEND3/8FMTN DEND3/8TA DEND3/8XCTA DEND3/8FMTA E-3/8 3/8 x 3/4 x 1/4 x 2-1/2 DENE3/8 DENE3/8XC DENE3/8FM DENE3/8TN DENE3/8XCTN DENE3/8FMTN DENE3/8TA DENE3/8XCTA DENE3/8FMTA F-3/8 3/8 x 5/16 x 1/4 x 2-1/8 DENF3/8 DENF3/8XC DENF3/8FM DENF3/8TN DENF3/8XCTN DENF3/8FMTN DENF3/8TA DENF3/8XCTA DENF3/8FMTA A-1/2 1/2 x 1 x 1/4 x 2-3/4 DENA1/2 DENA1/2XC DENA1/2FM DENA1/2TN DENA1/2XCTN DENA1/2FMTN DENA1/2TA DENA1/2XCTA DENA1/2FMTA B-1/2 1/2 x 1-1/8 x 1/4 x 2-7/8 DENB1/2 DENB1/2XC DENB1/2FM DENB1/2TN DENB1/2XCTN DENB1/2FMTN DENB1/2TA DENB1/2XCTA DENB1/2FMTA C-1/2 1/2 x 1 x 1/4 x 2-3/4 DENC1/2 DENC1/2XC DENC1/2FM DENC1/2TN DENC1/2XCTN DENC1/2FMTN DENC1/2TA DENC1/2XCTA DENC1/2FMTA D-1/2 1/2 x 7/8 x 1/4 x 2-5/8 DEND1/2 DEND1/2XC DEND1/2FM DEND1/2TN DEND1/2XCTN DEND1/2FMTN DEND1/2TA DEND1/2XCTA DEND1/2FMTA E-1/2 1/2 x 1 x 1/4 x 2-3/4 DENE1/2 DENE1/2XC DENE1/2FM DENE1/2TN DENE1/2XCTN DENE1/2FMTN DENE1/2TA DENE1/2XCTA DENE1/2FMTA F-1/2 1/2 x 7/16 x 1/4 x 2-1/4 DENF1/2 DENF1/2XC DENF1/2FM DENF1/2TN DENF1/2XCTN DENF1/2FMTN DENF1/2TA DENF1/2XCTA DENF1/2FMTA Metric A-095 9.5x19x6x63 DENA095 DENA095XC DENA095FM DENA095TN DENA095XCTN DENA095FMTN DENA095TA DENA095XCTA DENA095FMTA B-095 9.5x27x6x71 DENB095 DENB095XC DENB095FM DENB095TN DENB095XCTN DENB095FMTN DENB095TA DENB095XCTA DENB095FMTA C-095 9.5x19x6x63 DENC095 DENC095XC DENC095FM DENC095TN DENC095XCTN DENC095FMTN DENC095TA DENC095XCTA DENC095FMTA D-095 9.5x16x6x60 DEND095 DEND095XC DEND095FM DEND095TN DEND095XCTN DEND095FMTN DEND095TA DEND095XCTA DEND095FMTA E-095 9.5x19x6x63 DENE095 DENE095XC DENE095FM DENE095TN DENE095XCTN DENE095FMTN DENE095TA DENE095XCTA DENE095FMTA F-095 9.5x8x6x54 DENF095 DENF095XC DENF095FM DENF095TN DENF095XCTN DENF095FMTN DENF095TA DENF095XCTA DENF095FMTA A-127 12.7x25x6x70 DENA127 DENA127XC DENA127FM DENA127TN DENA127XCTN DENA127FMTN DENA127TA DENA127XCTA DENA127FMTA B-127 12.7x28.5x6x73 DENB127 DENB127XC DENB127FM DENB127TN DENB127XCTN DENB127FMTN DENB127TA DENB127XCTA DENB127FMTA C-127 12.7x25x6x70 DENC127 DENC127XC DENC127FM DENC127TN DENC127XCTN DENC127FMTN DENC127TA DENC127XCTA DENC127FMTA D-127 12.7x22x6x66 DEND127 DEND127XC DEND127FM DEND127TN DEND127XCTN DEND127FMTN DEND127TA DEND127XCTA DEND127FMTA E-127 12.7x25x6x70 DENE127 DENE127XC DENE127FM DENE127TN DENE127XCTN DENE127FMTN DENE127TA DENE127XCTA DENE127FMTA F-127 12.7x11x6x57 DENF127 DENF127XC DENF127FM DENF127TN DENF127XCTN DENF127FMTN DENF127TA DENF127XCTA DENF127FMTA

Diamond and Chipbreaker Cut HP Shank Burs $15.00 $16.81 $16.81 Resharp: : $9.00 or : $10.09 MC-2 MC-4 MC-5 MC-6 MC-7 MC-8 Diamond Cut 71G 33C 32P 31P Chipbreaker Cut Series 88 Burs Chipbreaker Doublecut Fastmill Chipbreaker TYPE OD x LOC x Shank x OAL Coated Coated MC-2 1/16 x 1/4 x.0925 x 1-1/2 DENMC-2 DENMC-2TA DENMC-2TN MC-4 3/32 x 3/8 x.0925 x 1-1/2 DENMC-4 DENMC-4TA DENMC-4TN MC-5 3/32 x 3/32 x.0925 x 1-1/2 DENMC-5 DENMC-5TA DENMC-5TN MC-6 3/32 x 3/8 x.0925 x 1-1/2 DENMC-6 DENMC-6TA DENMC-6TN MC-7 3/32 x 1/8 x.0925 x 1-1/2 DENMC-7 DENMC-7TA DENMC-7TN MC-8 3/32 x 5/8 x.0925 x 1-1/2 DENMC-8 DENMC-8TA DENMC-8TN 71G 3/32 x 1/8 x.0925 x 1-1/2 DEN71-G DEN71-GTA DEN71-GTN 33C 3/32 x 3/8 x.0925 x 1-1/2 DEN33-C DEN33-CTA DEN33-CTN 32P 1/16 x 3/8 x.0925 x 1-1/2 DEN32-P DEN32-PTA DEN32-PTN 31P 3/32 x 5/8 x.0925 x 1-1/2 DEN31-P DEN31-PTA DEN31-PTN Doublecut Fastmill Chipbreaker Doublecut Fastmill $17.00 $18.00 $19.60 $22.38 $24.80 $29.21 $22.38 $24.80 $29.21 Resharp: $10.20 $10.80 $11.76 $13.43 $14.88 $17.53 $13.43 $14.88 $17.53 Fractional Metric 88-A-4 88M-A-4 88-B-4 88M-B-4 88-C-4 88M-C-4 88-D-4 88M-D-5 88-T-4 88M-T-4 88-E-4 88M-E-4 88-F-4 88M-F-4 TYPE OD x LOC x Shank Coated Coated x OAL Chipbreaker Doublecut Fastmill Chipbreaker Doublecut Fastmill Chipbreaker Doublecut Fastmill 88-A-4 1/4 x 5/8 x 1/4 x 2 88-A-4 88-A-4XC 88-A-4FM 88-A-4TA 88-A-4XCTA 88-A-4FMTA 88-A-4TN 88-A-4XCTN 88-A-4FMTN 88-B-4 1/4 x 5/8 x 1/4 x 2 88-B-4 88-B-4XC 88-B-4FM 88-B-4TA 88-B-4XCTA 88-B-4FMTA 88-B-4TN 88-B-4XCTN 88-B-4FMTN 88-C-4 1/4 x 5/8 x 1/4 x 2 88-C-4 88-C-4XC 88-C-4FM 88-C-4TA 88-C-4XCTA 88-C-4FMTA 88-C-4TN 88-C-4XCTN 88-C-4FMTN 88-D-4 1/4 x 5/8 x 1/4 x 2 88-D-4 88-D-4XC 88-D-4FM 88-D-4TA 88-D-4XCTA 88-D-4FMTA 88-D-4TN 88-D-4XCTN 88-D-4FMTN 88-T-4 1/4 x 5/8 x 1/4 x 2 88-T-4 88-T-4XC 88-T-4FM 88-T-4TA 88-T-4XCTA 88-T-4FMTA 88-T-4TN 88-T-4XCTN 88-T-4FMTN 88-E-4 1/4 x 3/8 x 1/4 x 2 88-E-4 88-E-4XC 88-E-4FM 88-E-4TA 88-E-4XCTA 88-E-4FMTA 88-E-4TN 88-E-4XCTN 88-E-4FMTN 88-F-4 1/4 x 5/8 x 1/4 x 2 88-F-4 88-F-4XC 88-F-4FM 88-F-4TA 88-F-4XCTA 88-F-4FMTA 88-F-4TN 88-F-4XCTN 88-F-4FMTN Metric 88M-A-4 6x16x6x50 88M-A-4 88M-A-4XC 88M-A-4FM 88M-A-4TA 88M-A-4XCTA 88M-A-4FMTA 88M-A-4TN 88M-A-4XCTN 88M-A-4FMTN 88M-B-4 6x16x6x50 88M-B-4 88M-B-4XC 88M-B-4FM 88M-B-4TA 88M-B-4XCTA 88M-B-4FMTA 88M-B-4TN 88M-B-4XCTN 88M-B-4FMTN 88M-C-4 6x16x6x50 88M-C-4 88M-C-4XC 88M-C-4FM 88M-C-4TA 88M-C-4XCTA 88M-C-4FMTA 88M-C-4TN 88M-C-4XCTN 88M-C-4FMTN 88M-D-5 6x16x6x50 88M-D-5 88M-D-5XC 88M-D-5FM 88M-D-5TA 88M-D-5XCTA 88M-D-5FMTA 88M-D-5TN 88M-D-5XCTN 88M-D-5FMTN 88M-T-4 6x16x6x50 88M-T-5 88M-T-5XC 88M-T-5FM 88M-T-5TA 88M-T-5XCTA 88M-T-5FMTA 88M-T-5TN 88M-T-5XCTN 88M-T-5FMTN 88M-E-4 6x9.5x6x50 88M-E-5 88M-E-5XC 88M-E-5FM 88M-E-5TA 88M-E-5XCTA 88M-E-5FMTA 88M-E-5TN 88M-E-5XCTN 88M-E-5FMTN 88M-F-4 6x16x6x50 88M-F-6 88M-F-6XC 88M-F-6FM 88M-F-6TA 88M-F-6XCTA 88M-F-6FMTA 88M-F-6TN 88M-F-6XCTN 88M-F-6FMTN Bur Cut Types Single Cut = Special Order Doublecut = XC Chipbreaker Cut = Default Diamond Cut = XF Fastmill - Aluma Cut = FM 5

Custom tools available with print or tool samples. Ask us for a quote! Burs for Flexible Partials Part ID OD x LOC x Shank x OAL Cone Radius Bright PowerZ DENFP1 9/32x9/16x.0925x2-3/32 15 $35.00 $42.00 $42.00 $42.00 DENFP2 15/64x9/16x.0925x2-3/32 - $35.00 $42.00 $42.00 $42.00 DENFP3 5/32x1/2x.0925x2 11 $35.00 $42.00 $42.00 $42.00 DENFP4 5/32x1/2x.0925x2 - $35.00 $42.00 $42.00 $42.00 Mastercut Tool Corp. s newest dental bur series For flexible partials that are easier to adjust and polish Burs feature accurately defined and finely spaced chipbreakers DENFP1 DENFP2 DENFP3 DENFP4 Unique geometry : creates smaller material flows allows air to move through the tool efficiently results in less loading and decreased heat build up Milling Burs (for use on all popular CAD/CAM milling machines, including implant restoration applications) Standard Length 2 Flute Milling Burs OD x LOC x Shank x OAL SQ Ball.005x.015x1/8x1-1/2 DEN2200S $35.00 DEN2200B $38.00.010x.030x1/8x1-1/2 DEN2203S $35.00 DEN2203B $38.00.015x.045x1/8x1-1/2 DEN2206S $35.00 DEN2206B $38.00.020x.060x1/8x1-1/2 DEN2209S $35.00 DEN2209B $38.00.025x.075x1/8x1-1/2 DEN2212S $35.00 DEN2212B $38.00.030x.090x1/8x1-1/2 DEN2215S $35.00 DEN2215B $38.00.035x.105x1/8x1-1/2 DEN2218S $35.00 DEN2218B $38.00.040x.120x1/8x1-1/2 DEN2221S $35.00 DEN2221B $38.00.045x.135x1/8x1-1/2 DEN2224S $35.00 DEN2224B $38.00.050x.150x1/8x1-1/2 DEN2227S $35.00 DEN2227B $38.00.055x.165x1/8x1-1/2 DEN2230S $35.00 DEN2230B $38.00.060x.180x1/8x1-1/2 DEN2233S $35.00 DEN2233B $38.00.065x.195x1/8x1-1/2 DEN2236S $35.00 DEN2236B $38.00.070x.210x1/8x1-1/2 DEN2239S $35.00 DEN2239B $38.00.075x.225x1/8x1-1/2 DEN2242S $35.00 DEN2242B $38.00.080x.240x1/8x1-1/2 DEN2245S $35.00 DEN2245B $38.00.085x.255x1/8x1-1/2 DEN2248S $35.00 DEN2248B $38.00.090x.270x1/8x1-1/2 DEN2251S $35.00 DEN2251B $38.00.095x.285x1/8x1-1/2 DEN2254S $35.00 DEN2254B $38.00.100x.300x1/8x1-1/2 DEN2257S $35.00 DEN2257B $38.00.105x.315x1/8x1-1/2 DEN2260S $35.00 DEN2260B $38.00.110x.330x1/8x1-1/2 DEN2263S $35.00 DEN2263B $38.00.115x.345x1/8x1-1/2 DEN2266S $35.00 DEN2266B $38.00.120x.360x1/8x1-1/2 DEN2269S $35.00 DEN2269B $38.00 6 2 flute standard length milling burs for superb rigidity

Milling Burs (for use on all popular CAD/CAM milling machines, including implant restoration applications) Standard Length 4 Flute Milling Burs OD x LOC x Shank x OAL SQ Ball.005x.015x1/8x1-1/2 DEN2400S $35.00 DEN2400B $38.00.010x.030x1/8x1-1/2 DEN2403S $35.00 DEN2403B $38.00.015x.045x1/8x1-1/2 DEN2406S $35.00 DEN2406B $38.00.020x.060x1/8x1-1/2 DEN2409S $35.00 DEN2409B $38.00.025x.075x1/8x1-1/2 DEN2412S $35.00 DEN2412B $38.00.030x.090x1/8x1-1/2 DEN2415S $35.00 DEN2415B $38.00.035x.105x1/8x1-1/2 DEN2418S $35.00 DEN2418B $38.00.040x.120x1/8x1-1/2 DEN2421S $35.00 DEN2421B $38.00.045x.135x1/8x1-1/2 DEN2424S $35.00 DEN2424B $38.00.050x.150x1/8x1-1/2 DEN2427S $35.00 DEN2427B $38.00.055x.165x1/8x1-1/2 DEN2430S $35.00 DEN2430B $38.00.060x.180x1/8x1-1/2 DEN2433S $35.00 DEN2433B $38.00.065x.195x1/8x1-1/2 DEN2436S $35.00 DEN2436B $38.00.070x.210x1/8x1-1/2 DEN2439S $35.00 DEN2439B $38.00.075x.225x1/8x1-1/2 DEN2442S $35.00 DEN2442B $38.00.080x.240x1/8x1-1/2 DEN2445S $35.00 DEN2445B $38.00.085x.255x1/8x1-1/2 DEN2448S $35.00 DEN2448B $38.00.090x.270x1/8x1-1/2 DEN2451S $35.00 DEN2451B $38.00.095x.285x1/8x1-1/2 DEN2454S $35.00 DEN2454B $38.00.100x.300x1/8x1-1/2 DEN2457S $35.00 DEN2457B $38.00.105x.315x1/8x1-1/2 DEN2460S $35.00 DEN2460B $38.00.110x.330x1/8x1-1/2 DEN2463S $35.00 DEN2463B $38.00.115x.345x1/8x1-1/2 DEN2466S $35.00 DEN2466B $38.00.120x.360x1/8x1-1/2 DEN2469S $35.00 DEN2469B $38.00 Coated Milling Burs 4 flute standard length milling burs for superb rigidity OD x LOC x Shank x OAL LOP Flutes SQ PowerDLC Ball PowerDLC CR1 PowerDLC 1/64x3/64x1/8x2 3/64 2 DEN2000S $56.00 $63.00 - - - - - - 1/64x3/64x1/8x2 5/32 2 DEN2003S $56.00 $63.00 - - - - - - 1/32x3/32x1/8x2 3/32 2 DEN2006S $56.00 $63.00 DEN2006B $61.00 $68.00 - - - 1/32x3/32x1/8x2 5/16 2 DEN2009S $56.00 $63.00 DEN2009B $61.00 $68.00 - - - 1/32x3/32x1/8x2 1/2 2 DEN2012S $56.00 $63.00 DEN2012B $61.00 $68.00 - - - 3/64x9/64x1/8x2 9/64 2 DEN2015S $56.00 $63.00 DEN2015B $61.00 $68.00 - - - 3/64x9/64x1/8x2 5/16 2 DEN2018S $56.00 $63.00 DEN2018B $61.00 $68.00 - - - 3/64x9/64x1/8x2 1/2 2 DEN2021S $56.00 $63.00 DEN2021B $61.00 $68.00 - - - 3/64x9/64x1/8x2 3/4 2 DEN2024S $56.00 $63.00 DEN2024B $61.00 $68.00 - - - 1/16x3/16x1/8x2-1/2 3/16 2 DEN2027S $56.00 $63.00 DEN2027B $61.00 $68.00 DEN2027R.010 $81.00 $88.00 1/16x3/16x1/8x2-1/2 3/8 2 DEN2030S $56.00 $63.00 DEN2030B $61.00 $68.00 DEN2030R.010 $81.00 $88.00 1/16x3/16x1/8x2-1/2 1/2 2 DEN2033S $56.00 $63.00 DEN2033B $61.00 $68.00 DEN2033R.010 $81.00 $88.00 1/16x3/16x1/8x2-1/2.650 2 DEN2036S $56.00 $63.00 DEN2036B $61.00 $68.00 DEN2036R.010 $81.00 $88.00 1/16x3/16x1/8x2-1/2.800 2 DEN2039S $56.00 $63.00 DEN2039B $61.00 $68.00 DEN2039R.010 $81.00 $88.00 1/16x3/16x1/8x2-1/2 1 2 DEN2042S $56.00 $63.00 DEN2042B $61.00 $68.00 DEN2042R.010 $81.00 $88.00 3/32x3/16x1/8x2-1/2 3/16 4 DEN2045S $56.00 $63.00 DEN2045B $61.00 $68.00 DEN2045R.010 $81.00 $88.00 3/32x3/16x1/8x2-1/2 3/8 4 DEN2048S $56.00 $63.00 DEN2048B $61.00 $68.00 DEN2048R.010 $81.00 $88.00 3/32x3/16x1/8x2-1/2 1/2 4 DEN2051S $56.00 $63.00 DEN2051B $61.00 $68.00 DEN2051R.010 $81.00 $88.00 3/32x3/16x1/8x2-1/2 1 4 DEN2054S $56.00 $63.00 DEN2054B $61.00 $68.00 DEN2054R.010 $81.00 $88.00 Coated Milling burs, ideal for cutting zirconia, titanium and other difficult to machine materials 2 Flute Milling Burs for use on very specific machines (Metric Sizes, call for info) OD x LOC x Shank x OAL Neck Ball Bright 2 flute standard length milling burs for 1x2x3x38.78mmx14mm DEN3000B $50.00 $56.25 superb rigidity 2x2x3x38 1.6mmx14mm DEN3001B $50.00 $56.25 7

Milling Burs (for use on all popular CAD/CAM milling machines, including implant restoration applications) Standard Length 2 Flute Milling Burs in Metric Sizes OD x LOC x Shank x OAL SQ Ball 0.2x0.6x3x38 DEN1400S $35.00 DEN1400B $38.00 0.3x0.9x3x38 DEN1403S $35.00 DEN1403B $38.00 0.4x1.2x3x38 DEN1406S $35.00 DEN1406B $38.00 0.5x1.5x3x38 DEN1409S $35.00 DEN1409B $38.00 0.6x1.8x3x38 DEN1412S $35.00 DEN1412B $38.00 0.7x2.1x3x38 DEN1415S $35.00 DEN1415B $38.00 0.8x2.4x3x38 DEN1418S $35.00 DEN1418B $38.00 0.9x2.7x3x38 DEN1421S $35.00 DEN1421B $38.00 1x3.0x3x38 DEN1424S $35.00 DEN1424B $38.00 1.5x5.0x3x38 DEN1427S $35.00 DEN1427B $38.00 2.0x6.0x3x38 DEN1430S $35.00 DEN1430B $38.00 Standard Length 4 Flute Milling Burs in Metric Sizes OD x LOC x Shank x OAL SQ Ball 0.2x0.6x3x38 DEN1600S $35.00 DEN1600B $38.00 0.3x0.9x3x38 DEN1603S $35.00 DEN1603B $38.00 0.4x1.2x3x38 DEN1606S $35.00 DEN1606B $38.00 0.5x1.5x3x38 DEN1609S $35.00 DEN1609B $38.00 0.6x1.8x3x38 DEN1612S $35.00 DEN1612B $38.00 0.7x2.1x3x38 DEN1615S $35.00 DEN1615B $38.00 0.8x2.4x3x38 DEN1618S $35.00 DEN1618B $38.00 0.9x2.7x3x38 DEN1621S $35.00 DEN1621B $38.00 1x3.0x3x38 DEN1624S $35.00 DEN1624B $38.00 1.5x5.0x3x38 DEN1627S $35.00 DEN1627B $38.00 2.0x6.0x3x38 DEN1630S $35.00 DEN1630B $38.00 2 flute standard length milling burs for superb rigidity Custom tools available with print or tool samples. Ask us for a quote! 4 flute standard length milling burs for superb rigidity 8 Necked and Coated Milling Burs in Metric Sizes OD x LOC x Shank x OAL LOP Flutes SQ PowerDLC Ball PowerDLC Corner Radius 0.20 PowerDLC Corner Radius 0.50 PowerDLC 0.5x1.5x3x38 1.5 2 DEN1200S $51.00 $58.00 - - - - - - - - - 0.5x1.5x3x38 4 2 DEN1203S $51.00 $58.00 - - - - - - - - - 0.6x1.8x3x38 1.8 2 DEN1206S $51.00 $58.00 - - - - - - - - - 0.6x1.8x3x38 5 2 DEN1209S $51.00 $58.00 - - - - - - - - - 0.8x0.8x3x38 2.4 2 - - - DEN1210B $59.00 $66.00 - - - - - - 0.8x0.8x3x38 7 2 - - - DEN1211B $59.00 $66.00 - - - - - - 0.8x2.4x3x38 2.4 2 DEN1212S $51.00 $58.00 - - - - - - - - - 0.8x2.4x3x38 7 2 DEN1215S $51.00 $58.00 - - - - - - - - - 1x3x3x50 3 2 DEN1218S $51.00 $58.00 DEN1218B $59.00 $66.00 DEN1218R0.2 $71.00 $78.00 - - - 1x3x3x50 6 2 DEN1221S $51.00 $58.00 DEN1221B $59.00 $66.00 DEN1221R0.2 $71.00 $78.00 - - - 1x3x3x50 10 2 DEN1224S $51.00 $58.00 DEN1224B $59.00 $66.00 DEN1224R0.2 $71.00 $78.00 - - - 1x3x3x38 14 2 - - - DEN1227B $59.00 $66.00 - - - - - - 1x3x3x50 16 2 DEN1230S $51.00 $58.00 DEN1230B $59.00 $66.00 DEN1230R0.2 $71.00 $78.00 - - - 1x3x3x50 20 2 DEN1233S $51.00 $58.00 DEN1233B $59.00 $66.00 DEN1233R0.2 $71.00 $78.00 - - - 2x6x3x50 6 4 DEN1236S $51.00 $58.00 DEN1236B $59.00 $66.00 DEN1236R0.2 $71.00 $78.00 DEN1236R0.5 $71.00 $78.00 2x6x3x50 10 4 DEN1239S $51.00 $58.00 DEN1239B $59.00 $66.00 DEN1239R0.2 $71.00 $78.00 DEN1239R0.5 $71.00 $78.00 2x6x3x50 16 4 DEN1242S $51.00 $58.00 DEN1242B $59.00 $66.00 DEN1242R0.2 $71.00 $78.00 DEN1242R0.5 $71.00 $78.00 2x6x3x50 20 4 DEN1245S $51.00 $58.00 DEN1245B $59.00 $66.00 DEN1245R0.2 $71.00 $78.00 DEN1245R0.5 $71.00 $78.00 2.5x7x3x38 20 2 - - - DEN1248B $59.00 $66.00 - - - - - - Coated Milling burs, ideal for cutting zirconia, titanium and other difficult to machine materials

Custom tools available with print or tool samples. Ask us for a quote! 2 Flute Necked Milling Burs in Metric Sizes OD x LOC x Shank x OAL LOP SQ Ball Corner Radius 0.20 0.5x1x4x50 - DEN1000S $41.00 - - - - 0.5x1x4x50 4 DEN1003S $41.00 - - - - 1x2x4x50 6 DEN1006S $41.00 DEN1006B $47.00 - - 1x2x4x50 10 DEN1009S $41.00 DEN1009B $47.00 - - 1.5x3x4x50 10 DEN1012S $41.00 DEN1012B $47.00 - - 1.5x3x4x50 14 DEN1015S $41.00 DEN1015B $47.00 - - 2x4x4x50 10 DEN1018S $41.00 DEN1018B $47.00 DEN1018R0.2 $61.00 2x4x4x50 14 DEN1021S $41.00 DEN1021B $47.00 DEN1021R0.2 $61.00 Diamond Discs Fine = 44 Medium = 43 Coarse = 42 Flexible - Single Sided Safe Side Up 2 flute necked milling burs, ideal for cutting titanium and cobalt-chrome Diamond Disc Part IDs: 1: Begin with the Order No. 2: Indicate the course size (numerical codes can be found next in the course key) 3: Indicate U for unmounted or M for Mounted For Example: For a Serrated Die Separating Disc with a Dia of 450 that is mounted the part number would be D365C42M Flexible - Single Sided Safe Side Down Flexible - Double Sided Head Dia (1/10 mm) 190 2202 190 2202 190 220 220C2 Thickness (mm) = T.20.20.20.20.20.20.30 Order No. D919A D919B D918A D918B D345A D345B D918BA Super Flexible - Double Sided Washer Support Head Dia (1/10 mm) 190 220 160 220 220 22020 22020 Thickness (mm) = T.14.15.17.17.25.17.25 Order No. D911HEFA D911HEFB D911HA D911HB D911HC D911HFA D911HFB InterOral Flexible - Double Sided Flexible - Double Sided - Perforated Head Dia (1/10 mm) 080 100 220C 220 220 220 Thickness (mm) = T.15.15.30.15.25.15 Order No. D943A D943B D918PBA D405A D405B D605A 9

Diamond Discs (continued) Flexible - Double Sided - Serrated Double Sided - Serrated Die Separating Double Sided - Plaster Cutter Head Dia (1/10 mm) 190 220 300 450 300 880 Thickness (mm) = T.15.15.30.30.30.30 Order No. D365A D365B D365C D365D D321A D321B Multi-Use Diamonds Super Coarse = 21 Coarse = 22 Medium = 23 Fine = 24 Extra Fine = 25 Diamond Part IDs: 1: Begin with the Order No. 2: Indicate the course size (numerical codes can be found next in the course key) 3: Indicate the Pack Size (preceded by a dash, Available pack sizes vary) For Example: For a Multi-Use Diamond in Size 909 with a Super Coarse grit in a 10 pack the part number would be 909A21-10 Shape No. 909 909 834 6055 837KR 850KR 850 850 850 855 855 855 856 856 856 856 856 Size (1/10 mm) 035 043 021 018 012 018 012 014 018 012 016 018 014 016 018 021 023 Length (mm) 1.1 1.3 6.0 8.0 8.0 9.0 11/0.5 10/0.8 10/1.1 7/0.7 7/1.0 7/1.4 8/0.9 8/1.1 9/1.4 8/1.6 7/1.8 Order No. 909A 909B 834A 6055A 837KRA 850KRA 850A 850B 850C 855A 855B 855C 856A 856B 856C 856D 856E Shape No. 847 847 847 847 848 848 848 835 835 835 835 836 837 838 880 880 881 Size (1/10 mm) 012 014 016 018 016 018 023 008 009 010 012 012 012 012 010 012 014 Length (mm) 9/0.6 9/0.7 9/1.1 10/1.1 11/0.8 10/1.1 10/1.4 4.0 3.0 4.0 4.0 5.0 7.0 4.0 7.0 7.0 8.0 Order No. 847A 847B 847C 847D 848A 848B 848C 835A 835B 835C 835D 836A 837A 838A 880A 880B 881A Shape No. 830 830 878K 878K 878K 879K 878 878 879 879 862 862 863 863 863 863 392 Size (1/10 mm) 010 014 014 016 018 018 012 014 012 018 012 016 012 014 016 018 016 Length (mm) 2.2 3.0 9.0 9.0 8.0 11.0 8.0 8.0 10.0 9.0 8.0 8.0 10.0 8.0 10.0 9.0 5.0 Order No. 830A 830B 878KA 878KB 878KC 879KA 878A 878B 879A 879B 862A 862B 863A 863B 863C 863D 392A 10 Shape No. 852 858 859 889 801 801 801 805 805 805 806 813 811 368 368 368 379 Size (1/10 mm) 023 014 023 008 010 014 023 010 014 016 012 014 033 016 018 023 023 Length (mm) 10.0 8.0 10.0 3.0 1.0 1.4 2.3 1.0 2.0 2.0 2.5 2.0 4.2 3.0 5.0 5.0 4.5 Order No. 852A 858A 859A 889A 801A 801C 801E 805A 805B 805C 806A 813A 811A 368A 368B 368C 379A

Lab Diamonds Coarse = 52 Medium = 53 Fine = 54 Shape No. 801 801 801 801 801 805 805 807 837 837 837 837 848 848 848 842R 850 Size (1/10 mm) 012 014 016 023 029 018 023 016 018 023 030 040 018 023 030 018 016 Length (mm) 1.5 2.0 4.0 6.0 10.0 10.0 15.0 10.0 10.0 10.0 12.0 10.0 Order No. 801B 801C 801D 801E 801F 805D 805E 807A 837B 837C 837D 837E 848B 848C 848D 842RA 850D Shape No. 850 856 856 856 859 860 862 863 863 898 909 825 Size (1/10 mm) 023 012 021 025 018 012 025 012 014 016 055 093 Length (mm) 10.0 8.0 8.0 8.0 10.0 5.0 8.0 10.0 10.0 10.5 2.0 1.5 Order No. 850E 856F 856D 856G 859B 860A 862C 863A 863B 898A 909A 825A Turbo Designed Multi-Use Diamonds Diamond Part IDs: 1: Begin with the Order No. 2: Indicate the course size (numerical codes can be found next in the course key) 3: Indicate the Pack Size (preceded by a dash, Available pack sizes vary) For Example: For a Lab Diamond in Size 909 with a Coarse grit in a 10 pack the part number would be 909A52-10 Coarse = 30 Shape No. 368T 836T 837KRT 847T 847T 850T 850T 850KRT 855T 855T 856T 863T 880T Size (1/10 mm) 023 012 012 016 018 014 018 018 016 018 018 014 010 Length (mm) 5.0 5.0 8.0 9.0 8.0 10.0 10.0 9.0 7.0 7.0 9.0 8.0 7.0 Order No. 368TA 836TA 837KRTA 847TA 847TB 850TA 850TB 850KRTA 855TA 855TB 856TA 863TA 880TA Single-Use Diamonds Turbo Diamond Part IDs: 1: Begin with the Order No. 2: Followed by a 30 3: Indicate the Pack Size (preceded by a dash, Available pack sizes vary) For Example: For a 368T in a 10 pack the part number would be 368TA30-10 Shape No. 368 368 801 801 801 805 805 805 806 835 835 836 837 838 847 847 847 Size (1/10 mm) 016 023 010 014 023 010 014 016 012 008 009 012 012 012 012 014 016 Length (mm) 3.0 5.0 1.0 1.4 2.3 1.0 2.0 2.0 2.5 4.0 3.0 5.0 7.0 4.0 9/0.6 9/0.7 9/1.1 Order No. 368A 368C 801A 801C 801E 805A 805B 805C 806A 835A 835B 836A 837A 838A 847A 847B 847C Shape No. 847 848 848 850 850 850 852 855 855 855 856 856 862 863 863 863 863 Size (1/10 mm) 018 016 023 012 014 018 023 012 016 018 016 018 012 012 014 016 018 Length (mm) 8/1.1 11/0.8 10/1.4 11/0.5 10/0.8 10/1.1 10.0 7/0.7 7/1.0 7/1.4 8/1.1 9/1.4 8.0 10.0 8.0 10.0 9.0 Order No. 847D 848A 848C 850A 850B 850C 852A 855A 855B 855C 856B 856C 862A 863A 863B 863C 863D Shape No. 878 878K 878K 878K 879 879K 880 880 881 909 6055 Size (1/10 mm) 012 014 016 018 018 018 010 012 014 035 018 Length (mm) 8.0 9.0 9.0 8.0 9.0 11.0 7.0 7.0 8.0 1.1 8.0 Order No. 878A 878KA 878KB 878KC 879B 879KA 880A 880B 881A 909A 6055A Diamond Part IDs: 1: Begin with the Order No. 2: Indicate the course size (numerical codes can be found next in the course key) 3: Indicate the Pack Size (preceded by a dash, Available pack sizes vary) For Example: For a Single-Use Diamond in Size 909 with a Super Coarse grit in a 10 pack the part number would be 909A11-10 Super Coarse = 21 Coarse = 22 Medium = 23 Fine = 24 Extra Fine = 25 11

Electric Handpiece Motor Set Order Number: DEN-HPMOTORSET Package Includes: Control Box Handpiece Wrench Additional Brushes Foot Control Handpiece Stand Mastercut Tool Corp. s new Electric Handpiece Motor Set Accepts all 3/16 standard burs, diamonds and mandrels 0-35,000 rpm Variable Speed Control Smooth, quiet and durable with true variable speed foot control! 1 Year Warranty on the Control Box. 6 Months Warranty on the Handpiece. Great Low Cost! Ask about ordering your favorite burs for a motor set discount! List Price $399.00 American Made, World Class Quality Wholesale and Dealer Discounts Available Proudly distributed by: www.mastercuttool.com 965 F. Harbor Lake Drive Safety Harbor, FL 34695 USA Telephone (727) 726-5336 Fax (727) 725-2532 dental@mastercuttool.com 105 ISO 9001:2008 CERTIFIED Cutting Edge Technology Made in the U.S.A. 02-2011-61-FMP