The DREAM TEAM is made up of a high technical staff without comparison. Champions and winners including Roberto Trabucco, 10 times World Champion, 2 time s individual Italian champion and 6 times Italian team champion. Luigi Sorti, already 4 times Italian Champion, European and World Champion for Nations and for Club during 2007- a record unprecedented. To add to the other varied World championships won for Nations and Club, Massimiliano Greco 3 times Club World champion, Stefano Defendi several times World champion for Nation and Club, and regular member of the National Italian Team. The strong production capacity, the innovative carbon technology and the development of materials such as Nano fibres and resins have combined in an unrivalled mix, that have all contributed to the creation an impressive series of Long Poles that are totally unique, and of which we are very proud. The MRX-V project, developed in collaboration with REGLASS for guaranteed cooperation and assistance over time, has been conceived to satisfy the needs of modern anglers who often require a pole for use in coarse fishing competitions, but which has to have the reliability needed for carp fishery competitions. To reach this goal, studies were carried out on both materials and mandrels, and the results obtained were little short of sensational. To all of this must be added the guarantee of a product entirely Made in Italy and subject to the strictest tests. FUSION - The Fusion concept is applied on the section 2 and it uses two different wrappings of high module carbon, different resins and fibres orientation. the lower part is made using a stiffer quality carbon built with longitudinal construction, while the upper part is made by a carbon built with transversal construction. The result is a section that is extremely rigid and strong in the lower part but, at the same time, light and fast-striking in the upper part of the section. LINEAR JOINT - The Linear Joint system allows to achieve thinner linear diameters on the whole pole length, increasing the shipping speeddue a distinct shoulder of the male section and also increases the poles overall rigidity. The pole profile becomes absolutely exclusive, and it makes working the pole like it would be in one only section. MAGIC STEPS - This new innovation eliminates pole elastic sticking and friction to the inner wall, and provides smoother release of elastic due to Teflon coated steps built into the kit. These steps run the whole length of the tip and the second section, and gives a unique result maintaining unchanged the Weight and balance of the top sections. TEFLON JOINT - The Teflon Joints consists in a Teflon coating resin applied onto the male joint. This coating prevent a longer lasting on the section and a perfect precision of the fittings. it also avoid the joints to get stuck when wet or dirty. This concept is applied both on the original sections of the poles and the spare kits. ANTI FRICTION SYSTEM - The Anti-Friction System is a particular process that during the production prints on the section a microscopic rough mat layer. This layer offers several improvements to the pole: - easier shipping and unshipping of the pole, both dry or wet - stronger sections, because the sections don t need to be scratched or polished after production - stable Weight and balance, because this treatment maintain them unchanged. POWER ZONE - The introduction of the Power Zone consists in the creation of a stronger area in the bottom part of the sections, which is incorporated from section 5 down to the section 9, and which minimises any breakage at the base of each section, due to longitudinal carbon reinforcement over-wrapped. The addition of this extra-wrapping only onto a limited area of the section, allows to maintain unchanged the balance of the pole. SUN CORE - Sun Core is composed by a revolutionary carbon resin treatment, added with a micro-layer of Titanium. The new and unique finish repels heat and allow the sections to remain cool to touch even after hours under the direct sun-rays. It also prevents the pole becoming soft in its action, which is common to all poles when subjected to intense heat, and in contrast, maintains the pole rigidity when subjected to winter conditions. The Sun Core reduces the risk of breakage by maintaining the flexibility required during very cold conditions. This special resin finish enables as well the pole to be smoothly shipped back. CLEAN CAPS - The Clean Caps are made of medium density foam, and have a double utility: every time the male section is fitted, the lips of the Clean Caps clean the inner part of the joint, avoiding dangerous scratches by the sand or dust. In addition to that, once fitted in the male joint, they seal the section avoiding them to sink. NANOLITH JOINT - Nanolith is a special resin with a nanometric particles (dimensions in the order of a millionth of a millimetre) which gives great resisntance and above all damping properties. Thanks to their extremely reduced dimensions they can easily insert themselves into carbon filaments and epoxy resin assuring this way an improvement of the mechanical characteristics of the composite material. Essentially, the fisherman can obtain an even more prompt action which results more stable and lighter (the vibrations are damped during the fishing phases). SUN SCREEN FINISH - This new finish consists in a particular production process and carbon fibres orientation. The result is a mat surface of the sections that reflects the sun rays, allowing to keep them cool and giving as well a smooth shipping back. BLACK WAVE CONTROL - This new concept, allows to reduce the wave effect that is produced by striking the fish. The particular construction system gives a perfect balance and makes homogeneous the action of all sections, in particular the top five, that practically absorb the entire back wave progression. POWER JOINT SYSTEM - The PJS process is applied into the production process of the joints, that are wrapped by layers oriented in alternate direction. This unique innovation allows to obtain the best strength to ovalization and compression of the sections, and also improve the lasting of the joint in time. The last superficial layer is parallel oriented in order to avoid the joint to get stuck when wet.!!
TOP OF THE RANGE This is the flagship of the series. Light, well-balanced, rigid and resistant, it is the result of meticulous work to create a revolutionary, futuristic project destined for the demanding Made in Italy match market. The pole is completely different from previous models. The top sections mandrels have been totally re-designed and weights and diameters of each section recalibrated. In addition, a mix of highly innovative materials has been used to ensure the right balance between weight and strength. The surface is coated with material containing metallic micro-particles (SUN CORE) which forms a protective shell, ensuring smoother movement and the dispersion of static electricity on the surface. The reflective action of the particles keeps the temperature of the sections lower compared to that of normal black carbon, keeping pole action consistent even in extreme temperatures. The Dream Team MRX-V MATCH ONE is definitely a jewel which everyone would like to own. Roberto Trabucco 1x D. T. MRX-V MATCH ONE mt 13,00 1x MRX-V MATCH ONE EXTENSION 1x D. T. MRX-V CARP 1x MINI-EXTENSION Code Description Size mt. diam. C. Length Weight Sections 139-70-100 D. Team Mrx-v Match One Full Package 14,50 46 mm. 180 1040 9+1 139-70-010 D. Team Mrx-v Match One mt 13,00 13,00 46 mm. 180 790 9 139-70-011 Mrx-v Match One Extension 1,80 46 mm. 180 250 1 RAVANELLI TRABUCCO TEAM 2007 ITALIAN AND WORLD CHAMPION REGLASS CONCEPT 2
WORLD CLASS The Dream Team MRX-V All-rounder is our answer to the match man s request for an all-round pole suitable for use both for traditional fishing and for carp fisheries. This pole will undoubtedly gain a reputation for its unequalled characteristics, especially its balance, lightness and great reliability. The use of carefully chosen innovative materials and resins is the result of meticulous research, which combined with the best in technological design has project a pole which will be ranked among the best in competition poles. Top sections mandrels have been totally redesigned and weights and diameters of each section have been recalibrated to give an extremely light, well-balanced pole without compromising reliability and strength. A special manufacturing process which imprints a microscopic roughness on the surface making it opaque, gives it particular advantages of exceptionally smooth movement in dry and wet conditions, without increase in weight or wear over time. Code Description Size mt. diam. C. Length Weight Sections 138-72-100 D.team Mrx-v Allrounder Full Pack 14,50 46 mm. 180 1055 9+1 138-72-101 D. Team Mrx-v Allrounder Full Pack 13,00 46 mm. 180 810 9 138-72-010 D. Team Mrx-v Allrounder Mt. 13,00 13,00 46 mm. 180 810 9 138-72-011 Mrx-v Allrounder Extension Mt. 1,80 1,80 46 mm. 180 250 1 1x D. T. MRX-V ALLROUNDER mt. 13,00 1x ALLROUNDER EXTENSION KIT x DREAM TEAM MRX-V allrounder Code Description Sections 138-70-011 Mrx-v Match 1 * Extension 1 138-70-004 Mrx-v Match 1 * Mini Ext. 1 138-70-001 Mrx-v Match 1 * Top Kit 4 4 138-70-002 Mrx-v Match 1 * Top Kit 5 5 138-70-003 Mrx-v Match 1 * Pw Kit 2 138-70-005 Mrx-v Match 1 * Cupping Kit 2 138-72-011 Mrx-v Allround * Extension 1 138-72-004 Mrx-v Allround * Mini Ext. 1 138-72-001 Mrx-v Allround * Top Kit 4 4 138-72-002 Mrx-v Allround * Top Kit 5 5 138-72-003 Mrx-v Allround * Pw Kit 2 138-72-005 Mrx-v Allround * Cupping Kit 2 Gianluigi Sorti REGLASS CONCEPT 3
TOP TECHNOLOGY Stefano Defendi This model is at the top of the category reserved for carp fisheries poles, and represents the best for these demanding competitions. However, as its name implies, one of its best qualities is that it is particularly good for classic matches. The pole s structure is totally different from previous years models. Careful research into the mandrels and materials used resulted in a more rigid, more reliable product. Excellent balance combined with Reglass patents makes this a manageable, easy-to-use pole. The top kit is designed for smooth running elastic and optimal recovery. It is worth noting that the package which comes with the pole which will satisfy the demands of the very best match man. 1x D. T. MRX-V MATCH CARP mt.13,00 3x TOP KIT 5 SECTIONS Code Description Size mt. diam. C. Length Weight Sections 138-74-100 D. Team Mrx-v Match Carp Full Pack 13,00 46 mm. 180 825 9 1.290,00 138-74-101 D. Team Mrx-v Match Carp Full Pack 14,50 46 mm. 180 1095 9+1 1.390,00 138-74-010 D. Team Mrx-v Match Carp Mt.13,00 13,00 46 mm. 180 825 9 990,00 138-74-011 Mrx-v Match Carp Extention 1,80 46 mm. 180 270 1 180,00 REGLASS CONCEPT 4
SUPER STRENGTH Resistance, reliability and perfect balance are the features which make the D.T. MRX-V DEMON Carp a leader in carp fishery poles. Its manageability means it can also be used in more classic matches. Once more, all Reglass patents have been used, which together with the quality of a Made in Italy product ensure that this long pole is a success. EXTRA POWER The MRX-V Target Carp is also a pole created for the most demanding fishery anglers and for those who need a very strong pole for classic competitions. This latter aspect was central to the design; the latest innovations made it possible to keep the action stiff and reduce Weight, making it comparable with top end poles. Reliability is guaranteed by entirely Italian manufacture with every process subject to the strictest tests. A pole for carp fisheries or for coarse fishing? The choice is yours... 1x D. T. MRX-V DEMON CARP mt.13,00 1x TOP KIT 4 SECTIONS 1x D. T. MRX-V TARGET CARP mt.13,00 2 x TOP KIT 4 SECTIONS DREAM TEAM MRX-V CARP SERIES KIT Code Description Sections 138-74-011 Mrx-v Match Carp Extention 1 138-75-011 Mrx-v Demon Carp Extention 1 138-76-011 Mrx-v Target Carp Extention 1 180,00 138-73-000 Top Kit 3 Sections 3 70,00 138-73-001 Top Kit 4 Sections 4 120,00 138-73-002 Top Kit 5 Sections 5 195,00 138-73-003 Power Kit 2 60,00 138-73-005 Cupping Kit 2 60,00 138-73-004 Mini Extension 1 60,00 Code Description Size mt. diam. C. Length Weight Sections 138-75-100 D. Team Mrx-v Demon Carp Full Pack 13,00 46 mm. 180 850 9 990,00 138-75-101 D. Team Mrx-v Demon Carp Full Pack 14,50 46 mm. 180 1130 9+1 1.090,00 138-75-010 D.Team Mrx-v Demon Carp Mt.13,00 13,00 46 mm. 180 850 9 690,00 138-75-011 Mrx-v Demon Carp Extention 1,80 46 mm. 180 280 1 180,00 Code Description Size mt. diam. C. Length Weight Sections 138-76-100 D. Team Mrx-v Target Carp Full Pack 13,00 46 mm. 180 910 9 690,00 138-76-101 D. Team Mrx-v Target Carp Full Pack 14,50 46 mm. 180 1190 9+1 790,00 138-76-010 D. Team Mrx-v Target Carp Mt.13,00 13,00 46 mm. 180 910 9 490,00 138-76-011 Mrx-v Target Carp Extention 1,80 46 mm. 180 280 1 180,00 REGLASS CONCEPT 5
TOP QUALITY Thanks to new diameter mandrels on each section and the materials used, we have been able to work the miracle of producing a really competitively priced product which compares favourably with much more expensive match poles. Light, well-balanced. rigid but above all strong thanks to exclusive winding with special new NFT carbon material which gives better resistance to compression than any other match product. The sections have been treated with a special coating which gives extraordinarily smooth movement, and joints have been reinforced with a special Woven K1 carbon for greater grip between sections without penalizing quick connection. This pole is the best choice for those who want a reliable long pole. It is the ideal pole for those who want a single pole for both classic matches and carp fisheries. Massimiliano Greco MOST VERSATILE This long pole, created especially for carp fisheries, where strength and reliability are essential. This pole also adapts perfectly to more traditional type matches. Constructed in very high modulus carbon and coated in a special super-resistant NTF material which adds strength to all sections. To improve and protect the different sections from possible squashing during fishing and breaking down. All joints have been protected and wound with bands of Woven K1. This pole is an excellent combination of price and the many construction technology innovations and features used in its manufacture. 1x D.T. XPS HP ALLROUNDER mt.13,00 MATCH 1x D.T. XPS HP MATCH CARP mt.13,00 2x TOP KIT 4 SECTIONS 139-86-100 Dream Team Xps Hp Allrounder Full Pack 13,00 46 mm. 175 820 9 1.290,00 139-86-101 Dream Team Xps Hp Allrounder Full Pack 14,50 46 mm. 175 1100 9+1 1.390,00 139-86-010 Dream Team Xps Hp Allrounder 13,00 46 mm. 175 820 9 790,00 139-86-011 Xps Hp Allrounder Extension 1,80 46 mm. 175 280 1 150,00 Code description Size mt. Diam C. Length Weight Sections 139-87-100 D. Team Xps Hp Match Carp Full Pack 13,00 46 mm. 175 850 9 990,00 139-87-101 D. Team Xps Hp Match Carp Full Pack 14,50 46 mm. 175 1130 9+1 1.090,00 139-87-010 D. Team Xps Hp Match Carp 13,00 46 mm. 175 850 9 590,00 139-87-011 Xps Hp Match Carp Extension 1,80 46 mm. 175 280 1 120,00 6
SUPER STIFF This is the ideal pole for heavily stocked carp fisheries, where strength is a top priority. Lightness and reliability are the distinguishing features of the new XPS HP series. Using special new N.F.T. materials makes the pole super-resistant, light and rigid. Constructed with the latest technology, it is produced at a price which can be considered an absolute bargain for young anglers and those keeping an eye on costs. We can confidently say that no-one could have done better. EXTRA POWER The strongest pole of the XPS range for fishing commercial fisheries. It represents the best an angler can ask to win those difficult matches, where a strong but manageable pole is required. The balance is excellent, and the pole is extremely fast and reactive. The new surface finish helps the angler when shipping or unshipping the pole. This pole has been tested by our Dream Team in the worst situations, both in Italy and abroad, always coming out as a winner. 139-88-100 Dream Team Xps Hp Carp Power Full Pack 13,00 46 mm. 175 940 9 790,00 139-88-101 Dream Team Xps Hp Carp Power Full Pack 14,50 46 mm. 175 1220 9+1 890,00 139-88-010 Dream Team Xps Hp Carp Power 13,00 46 mm. 175 940 9 490,00 139-88-011 Xps Hp Carp Power Extension 1,80 46 mm. 175 280 1 100,00 139-89-100 D. T. Xps Hp Master Carp Full Pack 13,00 46 mm. 175 950 9 590,00 139-89-101 D. T. Xps Hp Master Carp Full Pack 14,50 46 mm. 175 1250 9+1 690,00 139-89-010 D. T. Xps Hp Master Carp 13,00 46 mm. 175 950 9 399,00 139-89-011 Xps Hp Master Carp Extension 1,80 46 mm. 175 300 1 100,00 1x D.T. XPS HP CARP POWER 2x TOP KIT 4 SECTIONS 1x TOP KIT 5 SECTIONS 1x D.T. XPS HP MASTER CARP 2x TOP KIT 4 SECTIONS DREAM TEAM XPS HP SERIES KIT Code description Sections 139-86-011 Xps Hp Allrounder Extension 1 150,00 139-87-011 Xps Hp Match Carp Extension 1 120,00 139-88-011 Xps Hp Carp Power Extension 1 100,00 139-89-011 Xps Hp Master Carp Extension 1 100,00 139-85-006 Power Kit 2 45,00 139-85-000 Top Kit 3 Sections 3 45,00 139-85-001 Top Kit 4 Sections 4 80,00 139-85-002 Top Kit 5 Sections 5 120,00 139-85-003 Top Kit 5 Sections Match 5 150,00 139-85-004 Mini Extension 1 40,00 139-85-005 Cupping Kit 2 45,00 139-85-002-R01 Section 1 1 15,00 139-85-002-R02 Section 2 1 20,00 139-85-002-R03 Section 3 1 35,00 139-85-002-R04 Section 4 1 50,00 139-85-002-R05 Section 5 1 70,00 7
SUPER STIFF XPS K-SERIES Series of long pole poles constructed entirely in high module carbon. Totally revolutionized compared to previous models. Thanks to new diameter mandrels on each section and the materials used, we have been able to work the miracle of producing a reasonably priced product which will without doubt be mistaken for a much more expensive classic match pole. Light, well-balanced. rigid but above all resistant thanks to exclusive winding with special new NFT carbon material which gives better resistance to compression than any other match product. The sections have been treated with a special coating which gives extraordinarily smooth movement, and joints have been reinforced with a special Woven K1 carbon for greater adherence between parts without penalizing quick connection. This pole is the best choice for those who love fishing with a long pole without reliability problems, and it is the ideal pole for those who want a single pole for classic matches and carp fishery. 1x D.T. XPS K1 ALL ROUNDER mt.13,00 1x GENIUS XPS M2 SEAT BOX 2x TOP KIT 4 SECTIONS FODERO DREAM TEAM XPS K1 SERIES KIT Code Description Sections 139-91-011 Xps K1 All Rounder Extension 1 149,00 139-92-011 Xps K1 Carp Match Extension 1 100,00 139-93-011 Xps K1 Sk Carp Extension 1 100,00 139-90-003 Power Kit 2 45,00 139-90-001 Top Kit 4 Sections 4 100,00 139-90-002 Top Kit 5 Sections 4 120,00 139-90-005 Cupping Kit 2 45,00 139-91-101 D. T. Xps K1 Allround Mt 13,00 Full Pack 13,00 47 mm. 178 cm 910 9 1.290,00 139-91-100 D. T. Xps K1 Allround Mt 14,50 Full Pack 14,50 47 mm. 178 cm 1210 9+1 1.390,00 139-91-010 Dream Team Xps K1 Allround mt 13,00 13,00 47 mm. 178 cm 910 9 890,00 139-91-011 Xps K1 Allround Extension 1,80 47 mm. 178 cm 300 1 149,00 Code Description 116-00-310 Genius Xps M2 Competition 8 * Limited stock promotion
GREAT VALUE This long pole, created mainly for fishing and matches in carp lakes, where resistance and reliability of the pole are essential, adapts perfectly to traditional type matches. Constructed in very high module carbon and coated in a special super-resistant NTF material which makes it indestructible. To improve and protect the different elements from possible squashing during insertion and dismantling, all joints have been protected and wound with bands of Woven K1. This rod is an excellent compromise between price and the many construction technology innovations used in its manufacture. BEST PRICE At the top of the XPS range this pole is designed for the requirement of commercial fisheries. It represents the very best an angler can ask to win into those difficult matches, but also for canal and river competitions in which the situation requires a strong but manageable pole. The balance is excellent, and the pole is extremely fast and reactive. The new surface finish help the angler handling the sections when shipping or unshipping the pole. This pole has been tested by our Dream Team in the worst situations, both in Italy and abroad, coming out always as a winner. 1x D.T. XPS K1 CARP MATCH mt.13,00 1x GENIUS XPS M2 SEAT BOX 1x TOP KIT 4 SECTIONS 1x TOP KIT 5 SECTIONS 2x POWER KIT 1x DREAM TEAM XPS K1 SK CARP mt.13,00 1x GENIUS XPS M5 SEAT BOX 2x POWER KIT 139-92-101 D. T. Xps K1 Carp Match Mt 13,00 Full Pack 13,00 47 mm. 178 cm 925 9 890,00 139-92-100 D. T. Xps K1 Carp Match Mt 14,50 Full Pack 14,50 47 mm. 178 cm 1225 9+1 990,00 139-92-010 D. T. Xps K1 Carp Match Mt 13,00 13,00 47 mm. 178 cm 925 9 690,00 139-92-011 Xps K1 Carp Match Extension 1,80 47 mm. 178 cm 300 1 100,00 139-93-100 D. T. Xps K1 Sk Carp Mt 13,00 Full Pack 13,00 47 mm. 178 cm 1020 9 490,00 139-93-101 D. T. Xps K1 Sk Carp Mt 14,50 Full Pack 14,50 47 mm. 178 cm 1360 9+1 590,00 139-93-010 D. T. Xps K1 Sk Carp Mt 13,00 13,00 47 mm. 178 cm 1020 9 399,00 139-93-011 Xps K1 Sk Carp Extension 1,80 47 mm. 178 cm 340 1 100,00 * Limited stock promotion 9
10,00 mt. This pole is offered at 10, 00 mt. only, and it is made entirely of Carbon High Module combined with Carbon High Resistance. This particular production process allow to get a very light and well balanced product. It is also very strong and reliable, and can be used both for silver fishing and commercial fisheries. It can be fitted with an elastic rating 20, and if necessary, it can be a very powerful tool able to tackle big carp. The action is crisp and the tip is produced with a large diameter to take a big size hollow elastic without any further cutting. The pole has 3 graphics sections. 8,40 mt. This carp pole is available only at 8,40 mt. Created to be a margin pole for carp fisheries it provides unbelievable strength but still offers a good balance and rigidity. The carbon double wall thickness used in the construction combined to the High Resistance carbon offers a total reliability that also allows speed of landing big fish. Elastic rating is recommended of 2,0. 5,80-7,20 mt This margin pole is available at 5, 80 and 7,20 mt, with an extension to reach 8,85mt as a maximum length. It is a legend in UK for several years, as it has been claimed by thousands of anglers as the most powerful pole ever made. This evolution version XTC, keeps all the construction secrets of the former model, but it has been further improved in terms of balance and weight. 139-65-010 Dream Team Xps M1 Carp 10,00 43 mm 169 850 7 290,00 139-65-001 Power kit 2,00 2 49,00 139-65-002 Kit 3 sections 3,00 3 89,00 136-75-580 Lucifer XTC 5,80 34 mm 159 370 4 84,90 136-75-700 Lucifer XTC 7,20 37 mm 159 545 5 114,90 136-75-704 Extension 1,65 40 mm 165 275 1 34,90 136-75-702 Power kit 2 2 29,90 131-75-020 Lucifer Arp Fisheries 8,40 41 mm 161 615 6 199,00 131-75-001 Power Kit - 145 45 2 40,00 Massimiliano Greco 10
9,50 to 11 mt. Entirely made of High Modulus Carbon and dedicated to the commercial fisheries fans. It is extremely strong, well balanced and stiff. The carbon used during the production, is wrapped with special crosses that allow the pole to be very fast on striking the fish and give a total control during the fish landing. Both sections 4 and 5 have been reinforced in the area that is usually held while playing the fish. The pole is coated with the special treatment that gives smooth shipping and unshipping. All the section bases have been reinforced and aligned in order to give the perfect action and rigidity by ligning up the arrows shown on both sections. 1x D.T. XPS SP mt 9,50 1x TOP KIT 3 SECTIONS 1x TOP KIT 4 SECTIONS DREAM TEAM XPS SP KIT Code Description Section 139-71-001 POWER KIT 2 139-71-002 TOP KIT 3 SECTIONS 3 139-71-003 TOP KIT 4 SECTIONS 4 139-71-004 MINI EXTENSION 1 9,50 to 11 mt. The slimmest and lightest pole of this season. We have been asked many times by the market to make a pole that can be used with one hand. We did it, but on top of these qualities of lightness and sections diameter, we have made this pole also extremely powerful and strong, as it can take an elastic rating 18/20 and spend a day catching big carp with ease. If used for silver fishing, it will make you think you are using a feather and not a pole. Available at 9,50 mt and with an extension to reach 11,50 mt. It is made with Super High Modulus carbon, combined with High Resistance carbon. 1x D.T. XPS SL mt 9,50 1x POWER KIT 1x TOP KIT 4 SECTIONS DREAM TEAM XPS SL KIT Code Description Section 139-70-001 POWER KIT 2 40,00 139-70-002 TOP KIT 3 SECTIONS 3 60,00 139-70-003 TOP KIT 4 SECTIONS 4 80,00 139-71-100 D. Team Xps Sp Full Pack 9,50 35 mm. 150 490 7 330,00 139-71-010 D. Team Xps Sp Mt. 9,50 9,50 35 mm. 150 490 7 199,00 139-71-011 Extension 1,50 38 mm. 153 235 1 40,00 139-70-100 D. T. Xps Sl Mt 9,50 Full Pack 9,50 35 mm. 151 470 7 360,00 139-70-010 Dream Team Xps Sl Mt 9,50 9,50 35 mm. 151 470 7 289,00 139-70-011 Extension 1,50 38 mm. 153 215 1 60,00 11