IMC GOLF Accessories, Gifts, and Awards 13th Edition INDIANA METAL CRAFT
Swing Awards Price includes complete award with laser engraved plate and individual box. Same logo may be ordered for large, medium, and samll awards with only one laser ser-up fee for logo preparation. Large, medium, and small awards ordered with the same logo may be combined for quantity pricing. Model Base Size Total Height Weight Small Golf Swing Award GA91 2¾ x 2¾ x 1½ 6.25 2 lbs. Large Golf Swing Award GA92 3½ x 3½ x 1 7 /8 7.5 3 lbs. Extra Large Golf Swing Award GA93 4½ x 4½ x 1 7 /8 8.125 4 lbs. Tooling Charges (G) Preparation charge for logo is $65.00(G). Laser Personalization: $7.00(A) per name or copy change Pricing (2A3C) 1-4 5-24 25 50 100 GA91 Small Golf Swing Award GA91 50.00 44.00 33.50 31.50 29.00 Large Golf Swing Award GA92 63.00 55.00 42.00 38.00 37.00 Extra Large Golf Swing Award GA93 75.00 65.00 50.00 45.00 43.50 GA92 2 GA93
IMC Ball Marker/Insert Tooling IMC Ball Markers See Page 2 for Tooling Ball Marker ¾ Brass Flat Back BM4FA -- -- 3.30 2.16 1.68 Five styles of ¾ & 1 ball markers/inserts available for use in Products shown with 3/4 and 1 Continuity icons. Ball Marker ¾ Nickel Silver Flat Back BM4FB -- -- 3.50 2.32 1.81 Ball Marker ¾ Enamel Flat Back BM4FC -- -- 3.50 2.58 2.18 Ball Marker ¾ ColorQuick Flat BM4FF 6.00 4.50 3.60 3.00 2.52 Ball Marker ¾ Brass with Post BM4PA -- -- 4.80 3.15 2.42 Tooling charges and descriptions are as follows: Suffix Description Tooling (G) A Die Struck Brass ¾ or 1 $160 B Die Struck Nickel Silver ¾ or 1 $160 C Enamel ¾ or 1 $100 D Laser MetalMark ¾ $50 F ColorQuick ¾ or 1 $60 ColorQuick Repeat Order Set Up: $35(G) ¾ enamel ball markers are priced as die struck hard enamel. 1 enamel ball markers are priced as die struck soft enamel. 3/4 & 1 Ball Markers Ball Marker ¾ Nickel Silver with Post BM4PB -- -- 5.00 3.30 2.56 Ball Marker ¾ Enamel with Post BM4PC -- -- 4.00 2.90 2.52 Ball Marker ¾ ColorQuick with Post BM4PF 8.50 6.50 5.20 4.30 3.60 Ball Marker ¾ Brass Magnetic Back BM4MA -- -- 4.80 3.44 2.80 Ball Marker ¾ Nickel Silver Magnetic Back BM4MB -- -- 5.10 3.70 3.04 Ball Marker ¾ Enamel Magnetic Back BM4MC -- -- 3.50 2.58 2.18 Ball Marker ¾ ColorQuick Magnetic BM4MF 6.00 4.50 3.60 3.00 2.52 3/4 Ball Marker with Post Back Ball Marker 1 Brass Flat BM4F1A -- -- 3.50 2.40 1.86 Ball Marker 1 Nickel Silver Flat BM4F1B -- -- 3.80 2.58 2.05 Ball Marker 1 Enamel Flat BM4F1C -- -- 3.00 2.10 1.72 Die Struck Ball Markers Ball Marker 1 ColorQuick Flat BM4F1F 7.50 5.60 4.50 3.70 3.11 Some designs require an additional silkscreen and epoxy dome. Add 10% to unit price and $35 (G) per silkscreen color. Enamel Ball Markers ColorQuick Enamel Ball Markers 3
Putting Alignment Tools Tooling Charges: See Page 2 *Includes use instructions Putting Alignment Tool with ¾ Nkl Silver Ballmark PT975B -- -- 11.50 8.70 7.20 Putting Alignment Tool with ¾ Enamel Ballmark PT975C -- -- 9.00 7.20 5.96 Putting Alignment Tool with ¾ ColorQuick Ballmark PT975F 13.50 10.40 9.50 8.10 6.95 Putting Alignment Tool with 1 Enamel Ballmark PT910C -- -- 9.00 7.20 5.96 Putting Alignment Tool with 1 ColorQuick Ballmark PT910F 14.50 11.40 10.50 8.84 7.45 USGA Conforming PT910C How To Use The IMC Putting Alignment Tool 1. Mark ball as normal with the Alignment Tool 2. Sight putting line by adjusting the Alignment Tool white center line along chosen putting line 3. Replace ball and match ball stripe to Alignment Tool white center line PT975F (with 3/4 or 1 marker on back side) 4. Remove the Alignment Tool and stroke putt using the alignment guide on putter IMC Ball Marker Putter Stud Our satin nickel putter stud fits all standard putter grips. The slide-in ¾ magnetic ball marker is securely attached and easily removed with thumb pressure. Tooling Charges: See Page 2 Putter Stud Nickel with Brass Ball Marker PS901A -- -- 12.03 9.05 7.53 Putter Stud Nickel with Nickel Silver Ball Marker PS901B -- -- 12.34 9.32 7.76 Putter Stud Nickel with Enamel Ball Marker PS901C -- -- 10.90 8.74 7.02 Putter Stud Nickel with ColorQuick Ball Marker PS901F 13.95 12.40 11.16 9.66 8.06 PS901B Patent No. D530767 4 PS901C
JM901B JM921C 1.5 Stock Jumbo Pocket Markers JM902C 1.25 Stock Jumbo Pocket Markers JM922C JM901C JM902F Putting Alignment Back Is Standard For All Stock Jumbo Pocket Markers And Optional For Custom Jumbo Pocket Markers *See Page 4 for How To Use Custom Jumbo Pocket Markers JM901F JM902F USGA Conforming JM922C Jumbo Pocket Markers Jumbo Pocket Markers are offered in two sizes, 1.25 diameter (with ¾ ballmark) or 1.5 diameter (with 1 ballmark). Their size makes them easy to locate in your pocket and the two marking options help to speed up play. Stock Jumbo Pocket Markers Stock outer rim design with custom Ballmark. Putting Alignment Back included. No Tooling Charge for stock design Pocket Marker. Insert Tooling Charges: See Page 2 *Includes use instructions 1.25 Jumbo Pocket Marker Jumbo Marker 1.25 w/ ¾ Nickel Silver Ballmark JM901B -- -- 10.50 7.60 6.10 Jumbo Marker 1.25 w/ ¾ Hard Enamel Ballmark JM901C -- -- 9.50 6.55 5.22 Jumbo Marker 1.25 w/ ¾ ColorQuick Ballmark JM901F 12.00 9.90 8.70 7.20 5.79 1.5 Jumbo Pocket Marker Jumbo Marker 1.5 w/ 1 Soft Enamel Ballmark JM902C -- -- 9.50 6.55 5.22 Jumbo Marker 1.5 w/ 1 ColorQuick Ballmark JM902F 13.50 11.40 10.00 7.80 6.68 Custom Jumbo Pocket Markers Design your own Jumbo Pocket Marker with custom rim design and optional reverse side imprint. Custom Jumbo Tooling(G): 185.00 per side Insert Tooling Charges: See Page 2 Single Sided Custom Jumbo Pocket Markers Pricing (AB3C) *Includes use instructions 100 250 500 1000 2500 1.25 Jumbo Pocket Marker Jumbo Marker 1.25 Custom w/ ¾ Nkl Silver Ballmark JM911B 10.50 7.50 6.00 5.40 5.10 Jumbo Marker 1.25 Custom w/ ¾ Enamel Ballmark JM911C 9.50 6.50 5.25 4.55 4.00 1.5 Jumbo Pocket Marker Jumbo Marker 1.5 Custom w/ 1 Enamel Ballmark JM912C 9.50 6.50 5.25 4.55 4.00 Double Sided Custom Jumbo Pocket Markers* Pricing (AB3C) *Includes use instructions 100 250 500 1000 2500 1.25 Jumbo Pocket Marker Jumbo Marker 1.25 Custom w/ Putting Alignment or Custom Back - ¾ Nkl Silver Ballmark JM921B 11.00 8.00 6.40 5.73 5.38 Jumbo Marker 1.25 Custom w/ Putting Alignment or Custom Back - ¾ Enamel Ballmark JM921C 10.00 6.95 5.54 4.88 4.38 1.5 Jumbo Pocket Marker Jumbo Marker 1.5 Custom w/ Putting Alignment or Custom Back - 1 Enamel Ballmark JM922C 10.00 6.95 5.54 4.88 4.38 *Double Sided Custom Jumbo Pocket Markers available with Putting Alignment Back or custom back. Custom back requires die charge. 5
IMC Hat Clips Tooling Charges: See Page 2 Classic Hat Clip Brass with Brass Ball Marker HC401A -- -- 10.40 7.90 6.67 Classic Hat Clip Brass with Enamel Ball Marker HC401C -- -- 9.70 6.80 5.75 Classic Hat Clip Brass with ColorQuick Marker HC401F 12.50 11.00 9.80 8.47 7.41 Classic Hat Clip Nickel Silver w/ Nkl Slver Marker HC402B -- -- 12.20 9.50 8.00 Classic Hat Clip Nickel Silver w/ Enamel Marker HC402C -- -- 11.50 8.00 6.83 Classic Hat Clip Nkl Silver w/ ColorQuick Marker HC402F 14.50 13.00 11.50 10.00 8.74 Economy Hat Clip Black Magic with Brass Marker HC901A -- -- 10.00 7.30 6.00 Economy Hat Clip Black Magic w/nkl Silver Marker HC901B -- -- 10.30 7.60 6.24 Economy Hat Clip Black Magic with Enamel Marker HC901C -- -- 7.70 5.97 4.99 Economy Hat Clip Black Magic w/colorquick Marker HC901F 9.80 8.70 7.82 6.77 5.92 Economy Hat Clip Pearl Gold with Brass Ball Marker HC901GA -- -- 10.50 7.60 6.25 Economy Hat Clip Pearl Gold w/ Enamel Ball Marker HC901GC -- -- 8.00 6.24 5.23 Economy Hat Clip Pearl Gold w/ ColorQuick Marker HC901GF 10.00 9.00 8.20 7.04 6.16 Economy Hat Clip Pearl Nickel w/ Nkl Silver Marker HC901NB -- -- 10.50 7.72 6.36 Economy Hat Clip Pearl Nickel w/enamel Marker HC901NC -- -- 7.80 6.00 5.10 Economy Hat Clip Pearl Nkl w/ ColorQuick Marker HC901NF 10.00 8.90 8.00 6.90 6.05 HC901F HC901N HC901 HC402 HC401 1 Hat Clips Tooling Charges: See Page 2 Golf Ball Hat Clip Nickel w/ 1 Enamel Ball Marker HC902C -- -- 7.50 5.80 4.88 Golf Ball Hat Clip w/ 1 ColorQuick Ball Marker HC902F 11.50 10.20 9.10 7.93 6.93 Golf Ball Hat Clip Gold w/ 1 Enamel Ball Marker HC902GC -- -- 7.90 6.20 5.21 Golf Ball Hat Clip Gold w/ 1 ColorQuick Ball Marker HC902GF 12.00 10.50 9.40 8.20 7.18 1 Ball Marker HC902 6 1 Ball Marker HC902G
DT981 Pearl Nickel Tool with Belt or Pocket Clip Repair Tools - 1 Tooling charges and descriptions are as follows: Suffix Description Tooling (G) A Die Struck Brass ¾ or 1 $160 B Die Struck Nickel Silver ¾ or 1 $160 C Enamel ¾ or 1 * $100 F ColorQuick ¾ $ 60 ColorQuick Repeat Order Set Up: $35(G) * Our enamel ¾ ball markers are always priced as die struck hard enamel. Some designs require an additional silkscreen and epoxy dome. Add 10% to unit price and $35(G) per silkscreen color. DT972 Spring Feature, Non-Magnetic Ball Marker Spring Repair Tool Nickel w/ Nickel Silver 1 Ball Marker DT972B -- -- 11.00 8.10 6.70 Spring Repair Tool Nickel with Enamel 1 Ball Marker DT972C -- -- 9.00 7.10 6.00 Spring Repair Tool Nickel with ColorQuick 1 Marker DT972F 14.00 12.00 10.70 9.25 8.08 DT993 Repair tool with push button quick release Repair Tool Clip Pearl Nickel with Enamel 1 Ball Marker DT981C -- -- 9.00 7.10 6.05 Repair Tool Pearl Nickel with ColorQuick Marker DT981F 14.00 12.00 10.70 9.25 8.08 Quick Release Repair Tool Acrylic with Enamel 1 Marker DT993C -- -- 9.50 7.40 6.30 Quick Release Repair Tool Acrylic with ColorQuick 1 Marker DT993F 14.00 12.50 11.00 9.55 8.36 DT985C - Custom Design on Front; 3/4 or 1 Round or Cushion Shaped Soft Enamel Ball Marker on Reverse Side Custom Repair Tools Tooling Charges (G): $490 Includes Tool and Ball Marker 100 250 500 1000 Custom Repair Tool Nickel with Soft Enamel Ball Marker DT985C 14.50 11.80 8.83 7.67 *Additional Finishes Available, Contact Factory. 7
Repair Tools - 3/4 Tooling charges and descriptions are as follows: Suffix Description Tooling (G) A Die Struck Brass ¾ or 1 $160 B Die Struck Nickel Silver ¾ or 1 $160 C Enamel ¾ or 1 * $100 F ColorQuick ¾ $ 60 ColorQuick Repeat Order Set Up: $35(G) * Our enamel ¾ ball markers are always priced as die struck hard enamel. Some designs require an additional silkscreen and epoxy dome. Add 10% to unit price and $35(G) per silkscreen color. Switchblade Repair Tool Classic Repair Tools Switchblade Repair Tool Stainless w/ Nickel Silver Marker DT992B -- -- 14.50 10.95 9.18 Switchblade Repair Tool Stainless w/ Enamel Ball Marker* DT992C -- -- 14.00 10.40 8.30 Switchblade Repair Tool Stainless with ColorQuick Marker DT992F 14.00 12.50 11.30 9.80 8.58 Classic Imported Repair Tool Gold with Brass Ball Marker DT941A -- -- 10.50 7.80 6.40 Classic Imported Repair Tool Gold with Enamel Ball Marker DT941C -- -- 8.20 6.40 5.50 Classic Imported Repair Tool Gold with ColorQuick Ball Marker DT941F 10.50 9.30 8.40 7.25 6.33 Classic Imported Repair Tool Nickel with Nickel Silver Marker DT942B -- -- 11.00 8.00 6.65 Classic Imported Repair Tool Nickel with Enamel Ball Marker DT942C -- -- 8.00 6.30 5.30 Classic Imported Repair Tool Nickel with ColorQuick Ball Marker DT942F 10.40 9.20 8.30 7.20 6.30 Imported Classic Repair Tool Black Nickel with Nickel Silver Ball Marker DT943B -- -- 11.00 8.00 6.65 Imported ClassicRepair Tool Black Nickel with Enamel Ball Marker DT943C -- -- 8.00 6.30 5.30 Imported ClassicRepair Tool Black Nickel with ColorQuick Ball Marker DT943F 10.50 9.30 8.40 7.25 6.33 DT992 Repair tool with push button quick release DT941 DT942 DT943 Classic USA Made Repair Tools Available 8 DT442B DT441A See www.indianaimc.com/classicrepairtools
DT45PNK DT451 Repair tool money or belt clip, brass plated DT45BLK DT46 DT45RED DT991 Non-Magnetic Insert DT45BLU Lasered Repair Tools Our anodized aluminum repair tools print white after lasering. Color choices are black, pink, red, and blue and have an imprint area of 1/2 x 1 3/8. The anodized coating is permanent. Laser Set-Up (G): $50 50 100 250 500 1000 Lasered Repair Tool - Red DT45RED 6.00 4.70 3.50 2.62 2.45 Lasered Repair Tool - Black DT45BLK 6.00 4.70 3.50 2.62 2.45 Lasered Repair Tool - Pink DT45PNK 6.00 4.70 3.50 2.62 2.45 Lasered Repair Tool - Blue DT45BLU 6.00 4.70 3.50 2.62 2.45 Stamped Brass Tool Stamped in solid brass, this tool has an imprint area of 1/2 x 1-1/8, and the imprint is always debossed. This lifetime solid brass tool is lightly lacquered and will age naturally after the lacquer wears off. Tooling Charges (G): $250 500 1000 2500 5000 10,000 DT46 Stamped Solid Brass Repair Tool 2.60 2.30 2.14 1.82 1.53 Repair Tools - 3/4 Tooling charges and descriptions are as follows: Suffix Description Tooling (G) A Die Struck Brass ¾ or 1 $160 B Die Struck Nickel Silver ¾ or 1 $160 C Enamel ¾ or 1 * $100 F ColorQuick ¾ $ 60 ColorQuick Repeat Order Set Up: $35(G) * Our enamel ¾ ball markers are always priced as die struck hard enamel. Some designs require an additional silkscreen and epoxy dome. Add 10% to unit price and $35(G) per silkscreen color. Repair Tool Money Clip Brass with Brass Ball Marker DT451A -- -- 12.00 9.00 7.46 Repair Tool Money Clip Brass with Enamel Ball Marker* DT451C -- -- 10.00 8.00 6.50 Repair Tool Money Clip Brass w/ ColorQuick Ball Marker DT451F 12.50 11.00 10.00 8.50 7.44 Leather Grip Repair Tool with Nickel Silver Insert DT991B -- -- 9.50 7.30 6.25 Leather Grip Repair Tool with Enamel Insert* DT991C -- -- 8.50 6.90 6.00 Leather Grip Repair Tool with ColorQuick Insert DT991F 13.00 11.50 10.40 8.90 7.80 9
Stainless Steel Cigar Cutter Laser Charges (G): $50 Cigar Cutter Stainless Steel w/ Laser Imprint 1672L 16.50 15.00 13.50 11.40 9.70 Cigar Cutter w/ Laser Imprint & Black Leather Sleeve 1675L 21.00 18.90 17.30 14.50 12.32 1675L 1672L Putting Cup Our 5 ¾ x 4.5 zinc die cast putting cup is satin nickel plated and accepts our standard continuity style ¾ ballmark/insert. The 3.75 diameter cup with an up ramp width of 2.75 will make the USGA standard 4.25 hole diameter look like a peach basket. It can be ordered with or without the lasered flush mounted center insert. Tooling charges and descriptions are as follows: Suffix Description Tooling (G) A Die Struck Brass ¾ $160 B Die Struck Nickel Silver ¾ $160 C Enamel ¾ * $100 D Laser Metalmark ¾ $50 F ColorQuick ¾ $ 60 ColorQuick Repeat Order Set Up: $35(G) * Our enamel ¾ ball markers are always priced as die struck hard enamel. Some designs require an additional silkscreen and epoxy dome. Add 10% to unit price and $35(G) per silkscreen color. ED300 With Optional Laser 2 Insert Pricing (C) Putting Cup with Brass Insert ED300A -- -- 15.00 13.50 12.70 Putting Cup with Nickel Silver Insert ED300B -- -- 15.00 13.50 12.70 Putting Cup with Enamel Insert ED300C -- -- 15.00 13.70 12.90 Putting Cup with Laser Metalmark Insert ED300D 17.50 15.00 13.95 13.40 12.87 Putting Cup with ColorQuick Insert ED300F 19.00 16.50 15.00 14.40 13.85 - For optional 2 diameter laser imprint in center of cup add $3.00 (C) and $50 (G) set up. 10
1705C Towel not included 1705C Towel Ring Our nickel finish towel ring includes a swivel clip ring for attachment to golf bag. The insert is permanently attached for security. Suitable for both standard and oversize towels. Tooling charges and descriptions are as follows: Suffix Description Tooling (G) A Die Struck Brass ¾ $160 B Die Struck Nickel Silver ¾ $160 C Enamel ¾ $100 D Laser MetalMark ¾ $50 F ColorQuick ¾ $ 60 ColorQuick Repeat Order Set Up: $35(G) * Our enamel ¾ ball markers are always priced as die struck hard enamel. Some designs require an additional silkscreen and epoxy dome. Add 10% to unit price and $35(G) per silkscreen color. Towel Ring with Brass Insert 1705A -- -- 13.00 9.70 7.80 Towel Ring with Nickel Silver Insert 1705B -- -- 13.30 9.90 7.90 Towel Ring with Enamel Insert 1705C -- -- 12.20 9.80 8.40 Towel Ring with Laser MetalMark Insert 1705D 18.00 13.50 10.80 8.88 7.79 Towel Ring with ColorQuick Insert 1705F 20.50 15.50 12.30 10.14 8.89 Golf Bag Watch Our bag watches feature premium Japanese quartz movements and are packaged in a tin presentation box. Custom dials are available, check with factory. Tooling charges and descriptions are as follows: Suffix Description Tooling (G) A Die Struck Brass ¾ $160 B Die Struck Nickel Silver ¾ $160 C Enamel ¾ $100 D Laser Metalmark ¾ $50 F ColorQuick ¾ $ 60 ColorQuick Repeat Order Set Up: $35(G) * Our enamel ¾ ball markers are always priced as die struck hard enamel. Some designs require an additional silkscreen and epoxy dome. Add 10% to unit price and $35(G) per silkscreen color. 12 25 50 100 250 Golf Bag Watch with Nickel Silver Insert 1193B -- -- 24.50 20.30 17.60 Golf Bag Watch with Enamel Insert 1193C -- -- 24.50 20.60 17.90 Golf Bag Watch with MetalMark Insert 1193D 47.00 35.00 27.90 23.00 20.15 Golf Bag Watch with ColorQuick Insert 1193F 49.00 37.00 29.50 24.50 21.26 1193 1193 11
Zinc Bag Tags IMC Zinc Alloy Bag Tags are hand finished, and come with an assembled leather strap for easy fitting to any golf bag or duffle. Offered in 3 sizes. Tooling Charges (G) Two Dimensional IMC Express Front side: No Charge GBT502Z Back Side: $100.00 Multi-Level, Three-Dimensional, and Fully Modeled Contact Factory No charge for reverse side personalization plate with or without copy. Pricing (2AB2C) 50 100 250 500 1000 2.5 Diameter (or equivalent oval or rectangle) GBT501Z 19.00 12.00 8.90 7.30 6.72 2.75 Diameter (or equivalent oval or rectangle) GBT502Z 22.00 14.00 10.00 7.90 7.20 3.00 Diameter (or equivalent oval or rectangle) GBT503Z 24.00 15.00 10.70 8.80 8.00 Optional Bag Tag Personalization Set-up Charges (A) Straight line copy: $15 Pricing (A): Mechanical or Laser Engraving per Line $4.00 GBT501Z GBT503Z GBT501Z 12
ColorQuick Bag Tags FULL-COLOR LOW MINIMUM Quick Delivery Tooling Charges (G) $60.00 2.5 ColorQuick Bag Tag Nickel Plate GBT925Q 14.00 12.00 9.50 7.70 6.30 GBT925Q Additional Bag Tag Styles Available GBT925Q Lead-Free Pewter Die Struck GBT95 Leather Medallion See www.indianaimc.com/bagtags Enamel Bag Tags Die Struck Soft Enamel Bags Tags Our die struck iron bag tagsinclude up to 4 soft enamel colors. Tooling Charges (G) $300.00 Pricing (AB2C) 100 250 500 1000 3 Die Struck Soft Enamel Bag Tag Nickel Plate GBT95 10.00 7.20 6.00 5.50 3 Die Struck Soft Enamel Bag Tag Gold Plate GBT95G 10.50 7.70 6.50 5.90 GBT95G 13
Golf Ball Mint Tins Our private label miniature golf ball mints are shipped assorted in peppermint and cinnamon flavors. The sugar free mints are packed in round clik-clak tins with your imprinted image or logo on the lid. Our stock golf ball image can be used as a background. Set Up: $50.00(G) C 50 100 250 500 1000 Golf Ball Mints with Private Label Imprint 1686 4.95 3.97 3.60 3.31 3.06 Money/Credential Clips Tooling Charges(G) MC4051/52/53/54: $300 MC925/926: $120 Pricing (2ABC) 100 250 500 1000 Money Clip Brass with Antique Nickel Plate MC4051 14.00 11.30 8.50 6.85 Money Clip Brass with Antique Bronze Finish MC4052 15.60 12.70 9.50 7.73 Money Clip Polished Highlights Nickel Plate MC4054 14.00 11.30 8.50 6.85 Money Clip Polished Highlights Gold Plate MC4055 14.50 11.80 8.85 7.16 Money Clip Polish Highlights Nkl Plate w/ Color MC4054C 16.50 13.50 10.20 8.25 Money Clip Polish Highlights Gold Plate w/ Color MC4055C 17.00 14.00 10.50 8.58 Money Clip Peanut Nickel w/ 1.5 Enamel Coin MC925 16.50 14.20 11.25 9.35 Money Clip Peanut Gold w/ 1.5 Enamel Coin MC926 17.00 14.70 11.60 9.75 MC4052 MC4054C MC4051 - Personalization is available. Contact factory for information. - Prices for MC4054C, MC4055C, MC925, and MC926 include up to 4 colors. PMS color match available. Item numbers represent finishes only. More than 25 shapes are available in any of the finishes shown. 14 MC4055C MC4055 MC926
Three outside pockets and strong magnetic clip Personal Leather Goods 1591 1588 1585 Strong magnetic clip 1587 Spring clip and two outside pockets 1592 1589 Each comes gift boxed The Cameo name has been known for excellence in personal leather goods since 1904. Every Cameo item is skillfully handcrafted from choice soft cowhide with turned edges and meticulous attention to detail. Each Cameo item is offered in black or tan and is gift boxed. Pricing (2AB2C) Black Cameo Credit Card Money Clip Wallet with Brass or Nickel Silver Insert 1585A/B -- 43.00 36.50 31.80 30.90 Black Cameo Credit Card Money Clip Wallet with Enamel Insert 1585C -- -- 36.00 31.30 30.50 Black Cameo Credit Card Money Clip Wallet with ColorQuick Insert 1585F 48.00 46.00 37.50 33.50 33.00 Tan Cameo Credit Card Money Clip Wallet with Brass or Nickel Silver Insert 1587A/B -- 43.00 36.50 31.80 30.90 Tan Cameo Credit Card Money Clip Wallet with Enamel Insert 1587C -- -- 36.00 31.30 30.50 Tan Cameo Credit Card Money Clip Wallet with ColorQuick Insert 1587F 48.00 46.00 37.50 33.50 33.00 Black Cameo Currency Organizer with Brass or Nickel Silver Insert 1588A/B -- 43.00 36.50 31.75 30.90 Black Cameo Currency Organizer with Enamel Insert 1588C -- -- 36.00 32.00 31.00 Black Cameo Currency Organizer w/ ColorQuick Insert 1588F 47.50 45.50 37.20 33.54 33.00 Tan Cameo Currency Organizer with Brass or Nickel Silver Insert 1589A/B -- 43.00 36.50 31.75 30.90 Tan Cameo Currency Organizer with Brass or Nickel Silver Insert 1589C -- -- 36.00 32.00 31.00 Tan Cameo Currency Organizer with ColorQuick Insert 1589F 47.50 45.50 37.20 33.54 33.00 Black Cameo Money Clip with Brass or Nickel Silver Insert 1591A/B -- 29.00 23.90 20.20 19.52 Black Cameo Money Clip with Enamel Insert 1591C -- -- 23.00 20.00 19.00 Black Cameo Money Clip with ColorQuick Insert 1591F 31.00 28.00 23.00 20.77 20.44 Tan Cameo Money Clip with Brass or Nickel Silver Insert 1592A/B -- 29.00 23.90 20.20 19.52 Tan Cameo Money Clip with Enamel Insert 1592C -- -- 23.00 20.00 19.00 Tan Cameo Money Clip with ColorQuick Insert 1592F 31.00 28.00 23.00 20.77 20.44 - Specify insert type by using the following suffixes on the above style numbers: A brass insert, B nickel silver insert, C enamel insert, and F ColorQuick insert. Minimum order for C insert is 100. 15
FULL-COLOR Four Color Process Digital Printing USA ColorQuick Golf Accessories LOW MINIMUM As Few As 25 Pieces Quick Delivery 3-5 Day Service (from art approval) Page 7 Page 9 Page 7 Page 8 Tooling 1. Tooling for our products can be created by a variety of techniques. Tooling charges vary with size, method of manufacture, and type of art and die modeling required. Artwork Guidelines 1. Vector art: Adobe Illustrator (PC/Mac), Adobe PDF (PC/ MAC) or Corel Draw (PC). Convert all text to outlines. Linked images must be embedded or sent with artwork. 2. Bitmap (raster) art for die cutting should be 300 dpi, black and white, no shading, not anti-aliased. Bitmap art for print reproduction can be in the RGB or CMYK colorspace, minimum 300 dpi at 100% final size. Accepted file formats are:.tif,.jpg,.eps,.psd. 3. Lists of copy for personalization must be submitted as a Microsoft Excel file. 4. Scans should be larger than actual size and at least 300 dpi. 5. We will develop art for jobs with reference material not complying with these guidelines, but additional development costs may be charged. Creation of artwork will be charged at $75(G) per hour (1/2 hour minimum). 16 Page 6 General Information 2. For all products we prepare a basic art layout for your approval. After art approval, we submit pre-production proofs only when requested and charges may apply for certain products. Please contact factory. 3. Our tooling and die development charges for domestically produced items are a one time charge. This charge does not repeat with reorders if reorder is for same product with no changes. We maintain all models, molds, dies, and tools for domestically made items as our property for your exclusive use. Import item tooling charges are valid three years from last order. Production Time After art and/or pre-production sample has been approved, we will begin production. Production times vary depending on the type of product ordered and your requirements. Please be specific about your exact use date so that we can schedule and ship most efficiently. Rush Orders: we ll make every accommodation possible. Shipping 1. Prices are FOB factory in Indiana. Please specify method of shipment and carrier or we will use our best judgment. 2. No charge for drop shipping entire order to one destination. 3. Multiple destination shipments: add $5.00(Z) per destination plus actual shipping charges. Overruns and Under-runs We make every attempt to ship the exact quantity ordered, but we reserve the right to ship and invoice 5% over/under quantity ordered. Less than Minimum Acceptable minimum is lowest quantity listed for each product as described in catalog. Some exceptions can be made for specific products. Please contact factory for specific requests. Customer Supplied Insertions IMC will insert customer supplied material (cards, bar codes, etc) at minimum rate of $0.25(G). We are happy to quote complicated insertions upon request. Customer Supplied Packaging IMC will quote, on request, inserting our product in customer supplied packaging. Page 5 Page 5 > ColorQuick Inserts/Markers are available on these and many more products! < Mechanical and Laser Engraving Most of our products can be mechanically engraved by diamond cut engraving, deep rout engraving, or laser engraving. Personalization Most of our products can be personalized with individual names or event or tournament names. Our in-house laser and mechanical engraving insures quick, accurate turnaround time. Personalization is a low cost option that increases value and appreciation for our products. Lists of copy for personalization must be submitted as a Microsoft Excel file. Trademarks/Logos IMC assumes no responsibility for determining who does or does not hold claim to a trademark or logo. Logos or trademarks depicted herein are to show capability only. These designs are not available for sale and do not imply endorsement of any products within this catalog. Logobearing merchandise can only be purchased by or through the company to which the logos or symbols belong. 2012 Indiana Metal Craft, Inc.