Additel 780 Series Pressure Controller Pressure / Process Calibration Equipment Pressure ranges from vacuum to 3,000 psi (200 bar) Removable interchangeable intelligent sensors Precision accuracy of 0.005% of reading plus 0.005% of full scale Standalone solution to 3,000 psi (200 bar), no gas bottle required when used with the Electric Pump and 3K Gas Booster Standalone solution to 1,000 psi (70 bar), no gas bottle required when used with the Electric Pump Standard model accuracy of 0.02% of full scale External pressure modules to 3,000 psi (200 bar) WiFi enabled communications Fully temperature compensated accuracy over 0 C to 50 C HART Communication and Profibus PA Large 7 color touch screen display Control stability of 0.003%FS Built-in barometer Easy-to-use icon based user interface OVERVIEW For years, we ve provided the most durable, accurate, quality pressure calibration products for field applications. The Additel 780 series controller incorporates the same durability, accuracy, and quality into a new bench top controller packed with features and functionality that is remarkably easy to use. The Additel 780 series offers two base ranges: to 1,000 psi (70 bar) and to 3,000 psi (200 bar). The base range establishes the maximum controlling range of the controller. Each configuration includes a control sensor which is preselected to the sensor range best suited for your application. External and internal sensors can be used which allows for expanded range and accuracy capability in the future. 01
Pressure / Process Calibration Equipment MODULAR DESIGN Each unit comes with one Intelligent Pressure Module configured to the many range offerings provided. Standard accuracy sensors (ADT160A-CPXXX) are silicone pressure sensors with a 1 year accuracy of 0.02% FS. The precision quartz based sensors improve the 1 year accuracy specification to 0.005% of reading + 0.005% FS. Each sensor has been specially aged, tested and screened before assembly. After assembly each sensor is temperature compensated over the range of 0 C to 50 C. The Additel 780 series allows for one internal pressure sensor and one external pressure sensor. The modular design of this unit provides for interchangeability of both the internal and external sensors with other Intelligent Pressure Modules. In addition to the Intelligent Pressure Modules, the Additel 780 series has a built in barometric sensor. This allows for switching between gauge pressures to absolute pressures. STANDALONE SOLUTION Typical pressure controllers will require a nitrogen bottle for the gas supply which make it difficult to move the controller around without having to move or connect to another bottle. The Additel 780 series is unique in that with the optional electric pump, you can generate pressures to 1,000 psi (70 bar) without the need of a gas bottle. Add the booster to the configuration and 3,000 psi (200 bar) is achievable with the Additel 780 controller series. PROCESS FUNCTIONALITY The 780 Series Pressure Controller is considered to handle a very wide range of applications which may normally require a pressure calibrator. Built-in capability, includes current and voltage measurement capability, 24 volt loop power, HART and Profibus PA communication, switch measurement capability, and much more. MEASUREMENT SPECIFICATIONS Model Number ADT780-1K ADT780-3K Pressure range -14.5 to 1,000 psi (-0.95 to 70 bar) -14.5 to 3,000 psi (-0.95 to 200 bar) [1] Control stability Precision (includes 1 year stability) 1 Year stability Media Over-range indication 0.003% FS (stability based on % FS of control sensor range) See pressure range table 0.01% FS standard accuracy sensors 0.005% FS precision accuracy sensors Clean gas 103% to 120% (based on sensor) Resolution 4, 5, 6, or 7 digits (user selectable) [2] Pressure type Warm up time Gauge, Absolute 15 minutes Typical pressure settling time (within 0.003%FS) 20 seconds (10%FS pressure change assuming 50 ml test volume) Measurement units Pa, hpa, kpa, MPa, bar, mbar, psi, mmhg@0 C,cmHg@0 C, mhg@0 C, inhg@0 C, inh 2 O@4 C, mmh 2 O@4 C, cmh 2 O@4 C, mh 2 O@4 C, mmh 2 O@20 C, cmh 2 O@20 C, mh 2 O@20 C, kg/m 2, kg/cm 2, mtorr, torr, atm, lb/ft 2, tsi, user selectable Minimum control pressure [3] 0.0001 psi 0.001 psi [1] Gas booster or HP gas supply required to reach 3,000 psi (200 bar). Booster ordered separately. [2] 7 digit resolution for precision model only. [3] Dependent on pressure module. 02
BAROMETRIC MEASUREMENT SPECIFICATION Pressure / Process Calibration Equipment Sensor/Mode Gauge Absolute ADT160A-02-CPXX N/A 40 Pa [1] ADT160A-01-APXXQ 3 Pa [2] N/A Barometer range (60~110)kPa, the accuracy is 40 Pa (11 Pa is optional) [1] 40 Pa uncertainty (k=2) includes calibration uncertainty, linearity, and long term stability (<30 Pa per year). Barometer range of 60 to 120 kpa. [2] Combined linearity, hysteresis, and repeatability. Add 3 Pa when used in gauge mode. When using the ADT160-01-APXXQ sensors with the ADT780 controller in gauge mode, regular zeroing will realign the barometric reading to provide the most accurate result. ELECTRICAL MEASURE SPECIFICATIONS Specification Range Resolution Accuracy Volts DC -30 to 30 V 0.1 mv ±0.01% rdg + 1.5 mv -300 to 300 mv 1 μv ±0.01% rdg + 15 μv Current DC -30 to 30 ma 0.1 μa ±0.01% rdg + 1.5 μa Switch test DC 24V output If the switch has detected voltage, the range is from 3 24 V 24V ± 0.24V, max 30 ma PHYSICAL SPECIFICATIONS Model Number Power Pressure ports ADT780-1K & ADT780-3K 100 to 240V, 50/60 Hz G1/8 F Storage temperature -20 C to 70 C Operating environment Display Weight Dimensions (DWH) Mounting Shock Vibration 0-90% RH non-condensing 7 inch (17.8 cm) color, touch screen display 33 lbs (15 kg) 16.5 x 17.3 x 5.2 inch (419 x 440 x 132 mm) Standard desktop, optional rack mount kit 4G 1G 10Hz~500Hz OTHER SPECIFICATIONS WiFi specifications Communications Stability indicator Typical slew rate Operating modes 802.11 b, g, and n RS232,USB,LAN,WIFI User selectable Typically 20 seconds Control, measure, and vent Display modes Localization Conformity Calibration certification Warranty Controller show pressure indication and control Calibrator shows pressure indication, control, and electrical measurement English, Chinese (simplified), German, Spanish, French, Italian, Portuguese, Russian, Japanese CE NIST-traceable certificate of calibration with data included 1 year 03
Electric Pump and Booster Pressure / Process Calibration Equipment Additel 780-1K-EPUMP ELECTRIC PUMP Generates Vacuum to 1,000 psi (70 bar) Built-in filter and liquid trap 1,000 psi (70 bar) Electric Pump Specifications Pressure range Weight Size(WHD) Power Media Outlet port -13.5 to 1,080 psi (-0.95 to 75 bar) 69.6 lbs (31.6 kg) 17.3 X 9.3 X 21.7 inch (440 X 235X 550 mm) 100 to 240V Air G1/8F Storage temperature -20 C to 70 C Operating environment Mounting Control operation 0-90% RH non-condensing Standard desktop, optional rack mount 2 LED displays with pressure limit settings Typical max pressure time Approx 2 min with ADT780 Controller Additel 780-3K-BST BOOSTER 3,000 psi (200 bar) Gas Booster Specifications Minimum inlet pressure Out pressure range 300 psi (20 bar) 300 to 3,600 psi (250 bar) Inlet flow rate Size (WHD) Weight Power Supply media 500ml/min 17.8 X 7.3 X 23.9 inch (451 X 185 X 607 mm) 74 lbs (33.6 kg) 100 to 240V Nitrogen or clean gas 04
Pressure / Process Calibration Equipment STANDARD ACCESSORIES ADT127-X External Manifold Manifold connection cable Power adapter OPTIONAL ACCESSORIES ADT160A ADT121-X ADT780-3K-BST Pressure modules (see module information) External pneumatic pressure manifold, 3,000 psi (200 bar), four hand-tight quick connectors 3,000 psi (200 bar) gas booster 9022 Test leads 2 sets (4 pc) ADT780-1K-EPUMP 1,000 psi (70 bar) electrical pump 9020 Short circuit cable 1 set (2 pc) ADT780-VACPUMP Vacuum pump 9060 Pressure module connection cable 9050 RS232 to USB adapter Adapter set (adapters to fit the ADT78X port to male fittings) 1 set (2 pcs G1/8M to G1/4M, 2 pcs G1/8M to Festo, release valve) Liquid trap Liquid trap Manual NIST traceable certificate 9912-780 Shipment case for the ADT780 Controller O-rings 3 types Additel/PCal Manual calibration software Vacuum/Vent tubing 2 pc Additel/ACal Automated calibration software, Task and asset management Rack mount kit Rack mount kit ADT100-780-Kit Adapter set, total 9 pcs. G1/8 M to 1/4NPT M (3 pcs) G1/8 M to G1/4 M (3 pcs) G1/8 M to M20x1.5 M (3 pcs) ADT780 ORDERING INFORMATION (Controller without 3K psi booster) Model Number ADT780 3k CP300 N HABP Model 780 Maxmum Range: 3K-3,000 psi (200 bar) 1K-1,000 psi (70 bar) Pressure range: See range table High Accuracy Barometer Manifold port type: N-1/4NPT male N2-1/2NPT male B-1/4BSP male M-M20x1.5 male 05
ADT160A Intelligent Digital Pressure Modules Pressure / Process Calibration Equipment Gauge pressure Differential pressure SPECIFICATIONS P/N Pressure Range Pressure Rating Media Accuracy psia bar.a Burst Over Pressure Suggested Controller Compatibility Internal/ External Use Precision Quartz Sensors [1] AP45Q 0 to 45 2.0 G 0.005% rdg + 0.005% FS 3x 1.2x ADT780-1K only Both AP100Q 0 to 100 7.0 G 0.005% rdg + 0.005% FS 3x 1.2x ADT780-1K only Both AP400Q 0 to 400 28 G 0.005% rdg + 0.005% FS 3x 1.2x Both Both AP500Q 0 to 500 35 G 0.005% rdg + 0.005% FS 3x 1.03x Both Both AP1KQ 0 to 1,000 70 G 0.005% rdg + 0.005% FS 3x 1.1x Both Both AP2KQ 0 to 2,000 140 G 0.005% rdg + 0.005% FS 3x 1.1x ADT780-3K only Both AP3KQ 0 to 3,000 200 G 0.005% rdg + 0.005% FS 3x 1.1x ADT780-3K only Both Standard Pressure Sensors P/N Pressure Range Pressure Rating Media Accuracy psig bar.g Burst Over Pressure Suggested Controller Compatibility Internal/ External Use CP10 ±10 ±0.7 G 0.02% FS 3x 1.2x ADT780-1K only Both CP15 ±15 ±1.0 G 0.02% FS 3x 1.2x ADT780-1K only Both CP30-15 to 30-1 to 2.0 G 0.02% FS 3x 1.2x ADT780-1K only Both CP50-15 to 50-1 to 3.5 G 0.02% FS 3x 1.2x ADT780-1K only Both CP100-15 to 100-1 to 7.0 G,L 0.02% FS 3x 1.2x ADT780-1K only Both CP300-15 to 300-1 to 20 G,L 0.02% FS 3x 1.2x Both Both CP500-15 to 500-1 to 35 G,L 0.02% FS 3x 1.2x Both Both CP600-15 to 600-1 to 40 G,L 0.02% FS 3x 1.2x Both Both CP1K -15 to 1,000-1 to 70 G,L 0.02% FS 3x 1.2x Both Both CP2K -15 to 2000-1 to 140 G,L 0.02% FS 3x 1.2x ADT780-3K only Both CP3K -15 to 3,000-1 to 200 G,L 0.02% FS 3x 1.2x ADT780-3K only Both CP5K -15 to 5000-1 to 350 G,L 0.02% FS 3x 1.2x N/A External CP10K -15 to 10,000-1 to 700 G,L 0.02% FS 2x 1.2x N/A External [1] Contact Additel for other range options. **Low pressure sensors (ADT160A-XX-DPX) available for low pressure and differential pressure measurement. Also available for low pressure control (gauge mode only). Ranges from ±1 inh 2 0 (2.5 mbar) to 300 inh 2 O (700 mbar). 06
Pressure / Process Calibration Equipment SENSOR SPECIFICATIONS Standard Accuracy Precision Accuracy CPXXX AP3KQ AP1KQ AP100Q Temperature compensation -10 C to 50 C (14 F to 122 F) 0 C to 50 C (32 F to 122 F) Operating temperature -10 C to 50 C (14 F to 122 F) 0 C to 50 C (32 F to 122 F) Storage temperature -20 C to 70 C (-4 F to 158 F) -20 C to 70 C (-4 F to 158 F) Relative humidity 95% RH 95% RH Pressure connections (for external use only) 1/4NPT, 1/4BSP, M20x15 1/4NPT, 1/4BSP, M20x15 Enclosure (for external use only) SS enclosure SS enclosure Dimensions (Dia x H) 33 mm x 123 mm (1.3 x 4.84 ) 44 mm x 220mm (1.7 x 8.7 ) 60 mm x 190 mm (2.4 x7.5 ) Weight 0.4 kg (0.99 lb) 0.8 kg (1.8 lb) 1.2 kg (2.6 lb) [1] Internal sensors used to go inside the ADT780 need to have a M20 connection and connection kit. ORDERING INFORMATION Model Number ADT160A 01 CP300 PSI N Model Range type: PSI - range by psi BAR - range by bar Accuracy: 01 0.005% rdg + 0.005% FS 02 0.02% FS Pressure range: See range table External pressure port type: N - 1/4NPT male N2-1/2NPT male B - 1/4BSP male M - M20x1.5 male 07
Pressure / Process Calibration Equipment Pressure Hoses, Adapters and Fittings Additel 100 Series Filters ADT100-FLT-600 600 psi (40 bar) Pneumatic Filter Specifications Pressure range Filtering resolution -15 to 600 psi (-1.0 to 40 bar) 0.04 mm Operation temperature -10 C to 50 C Safety pressure <720 psi (50 bar) Size Outlet/Inlet port 1.18 dia x 5 in (30 dia x 127 mm) (size will vary based on adapters) See ordering information Storage temperature -20 C to 70 C Material 304 SS ADT100-FLT-10K 10,000 psi (700 bar) Hydraulic Filter Specifications Pressure range Filtering resolution -15 to 10,00 psi (-1.0 to 700 bar) 0.07 mm Operation temperature -10 C to 50 C Safety pressure Size Outlet/Inlet port <12,000 psi (827 bar) 0.87 x 0.98 x 4 in (22 x 25 x 100 mm) (size will vary based on adapters) Comes with removable male and removable female adapter Storage temperature -20 C to 70 C Material 304 SS ORDERING INFORMATION ADT100 600 N Inlet Seals Range: 600-600 psi (40 bar) 10K-10,000 psi (700 bar) Window Seals Drain valve Filter Port type: N-1/4NPT male and 1/4NPT female N2-1/2NPT male and 1/2NPT female B-1/4BSP male and 1/4BSP female B2-1/2BSP male and 1/2BSP female M-M20x1.5 male and M20x1.5 female ADT100-FLT-10K Seals Outlet ADT100-FLT-600 08 Phone: 714-998-6899 Fax: 714-998-6999 Email: sales@additel.com Corporate Headquarters 22865 Savi Ranch Parkway Ste F Yorba Linda, CA 92887, USA Salt Lake City Office 802 Bamberger Dr, Suite C American Fork, UT 84003, USA