DESIGNQUALITYSAFETYINNOVATION HEAD Protection
Essential and compulsory in most of the industrial works, head protection is something usual, but is not alien to research and improvement. Made to avoid shocks, soften falls, protect the electric arc, eliminate pressure or reduce risk of headaches, Sibol has known how to combine perfectly, in this products chapter, lightness with ergonomics and actual design. 1
Protection Helmets Protection Cap Head Protection 4 2
STANDARD Head Protection Protection Cap Protection Helmets Marking : According to the European applicable legislation Manufacture date, for example: 4th quarter of 2010 OBX 1 2 1 2 10 Manufacture EN 397 Use limit 14 8 4 53 a 63 cm 3 4-20ºC 440V- MM Size Resistance to the tests of impacts and break through at -20º applicable IDRA PA Resistance to the test of the protection of the metal in fusion Resistance to the tests of electrical isolation Manufacturer Expiring date, for example: 1st quarter of 2014 CE-EN s Rules EN 397 EN 50365 EN 812 EN 13087-1 EN 13087-2 EN 13087-3 EN 13087-4 EN 13087-5 EN 13087-6 EN 13087-7 EN 13087-8 EN 13087-10 Description Industrial Helmets Protection helmets for the industry Electrically isolating helmets for the usage in low tension instalations Protection helmets against shocks for industry Protection Helmets Conditions and conditioning Impacts absorption Resistance to the perforation Retention system efficiency Resistance to the retention system Visual field Flame retardant Electrical properties Resistant to the radiant heat Definitions Head Protectors: Sets made to protect the upper side of the head against shocks and hits. Electric arc: Electric shock made between two electrodes submitted to a potential difference and placed into the bosom of a rare gaseous atmosphere, normally at low pressure or at open air. Skullcap: Element of hard material and smooth finish which made the external general shape of the helmet. The function is to limit the shock damages. Harness: Full set of elements which constitute a way to maintain the helmet on the head and take up kinetic energy during an impact. Chinstrap: Strap that goes linked under the chin holding the helmet to the head and avoids the fall. This element is optional in the equipment setting up, and not all the helmets have it compulsory. Can be simple or with chinstrap. Especially used in height works. Behaviour requirements Compulsories Impacts absorption Resistance to the perforation Flame retardant Points of fitting chinstrap Label Optional Striker fall with hemispheric head of 5 kg mass from 1m high. The strength transmitted to the test head is less than 5 Kn. Striker fall with hemispheric head of 3 kg mass from 1m high. Brog s tip mustn t touch the head of the test. Applications of a propane flame during 10 seconds. The material exposed to the flame doesn t have to burn 5 seconds after removing from the flame. They must resist a traction strength higher than 150 N and must slacken with a strength higher than 250 N. The label can go fixed to the helmet, but it must keep its label readable after the conditioning test. Very low temperature Impacts absorption and resistance to the penetration -20º C or -30º C. Very high temperature Impacts absorption and resistance to the penetration 150º C. Electrical properties Lateral deformation Molten metal splashes EN 50365. This requirement ensures user protection during a short period of time against electrical active conductor with a voltage up to 440V. This standard is applicable to electrically insulating helmets used for working live or closet parts on installations not exceeding 1000V a.c. or 1500 V d.c. These helmets, when used in conjunction with other electrically insulating protective equipment prevent dangerous current from passing though persons via their head. Helmet maximum deformation won t exceed from 40 mm and the lateral residual deformation won t exceed from 150 mm after applying an incremented strength up to 430 N. The helmet mustn t be pierced by molten metal, show any deflection bigger than 10 mm or burn with flame emission after a period of 5 seconds timed when the flow of molten metal is already finished. 3
STANDARD Head Protection A Physical requirements C B Inner vertical distance (A): Represents the inner surface heigth of the skullcap on the head, when the helmet is being used. It is related with the stability. It musn t be higher than 50 mm. Inner vertical space (B): Air space depth is over the head, when the helmet is being used. It is related with ventilation. It must be higher than 25 mm. Quilted (C) Protection Helmets Choice of the suitable head protector To protect ourselves correctly and choose the most suitable safety helmet, first of all we will have to identify the risk: shocks, object impacts or combined risks (where will be required face or ear protection). Protection Cap HELMET EN VENTILATION CAP ACCESORIES REGULATORY ROULETTE COLOURS EN 397 EN 50365 NO NO IDRA EN 397 EN 50365 OPTIONAL OPTIONAL * KARA EN 397 EN 50365 OPTIONAL OPTIONAL * IRIS II EN 397 NO NO 3772 EN 812 NO NO NO JAGUAR * colour white. Rest of colours on request of 20 units minimum. 4
IDRA Helmet Head Protection Protection Cap Protection Helmets IDRA Helmet > EXPERT CHARACTERISTICS Safety helmet against short-circuit arc with integrated visor. It has a polycarbonate visor of 1.7 mm thickness, allowing its continued use without causing eyestrain. Anti-fog coating visor on the inside. Anti-scratch coating on the outside. User s head and face protection against electric arcs and the danger of projection of various particles. The helmet is composed of a double shell that allows the visor to enter inside the helmet when is not being used. The visor is perfectly positioned on the head, in the upstream position, preventing the user has an additional weigth on the front. Allows to combine the helmet with the integrated visor alongside prescription espectacles. Thanks to the helmet and visor features, the IDRA can be used for many other applications where the protection of the head and face is needed. Valid for the use with the Adaptator for Ear muff SILENTO. Net weigth: 655 gr. (complete helmet with visor and chinstrap). s: EN 397 / EN 50365 WSB10000102 Ear Muff Adaptor SILENTO WSB10000302 5
IDRA Helmet Head Protection Helmet s Technical Specifications Helmet Shock absorption at -10º C, -20º C and +50ºC. Penetration resistance at -10º C, -20º C and +50º C. Flame Resistance. Electrical Insulator. Resistance to molten metal particles. Weight: 620 gr-655 gr with chin strap. Electrical Properties (EN 50365): This standard is applicable to electrically insulating helmets used for working live or closet or live parts on installations not exceeding 1000 V a.c. or 1500 V d.c. These helmets, when used in conjuction with other electrically insulating protective equipment prevent dangerous current from passing through persons via their head. According to the standard EN 397 Protection helmets for the industry. EN 50365 Electrically insulating helmets for use on low voltage installations. Protection Helmets Protection Cap Visor s Technical Specifications Visor Marking According to the standard Optical Class 2 2 EN 166, 167 and 168 UV Filter 2-1,2 EN 166 and 170 Protection against medium energy impact 120 m/s B EN 166 and 168 Protection against molten metals, hot liquids 9 EN 166 and 168 Protection against liquid droplets 3 EN 166 and 168 Protection against short circuit electric arc 8 EN 166, 168 and 170 Resistance to the surface damage by fine particles K EN 166 and 168 Resistance to the fogging of oculars N EN 166 and 168 Composition: 1. Outer layer of polyamide. 2. Inner layer of polyamide. 3. Textile head harness with polythene strip. 4. Adapter to head, with lever to adjust from 53 cm to 63 cm. 5. Support to hook the ear-muffs. 6. Apply arc-shaped to fit visor. 7. Polycarbonate Visor of 1.7 mm. Thickness. 8. Levers to insert or remove the visor. 9. Support for chin strap. 10. Anchor points for chin strap. OpTional: 11. Front or side Logo. 12. Trademark, in relief. 6
KARA Helmet Head Protection Protection Cap Protection Helmets KARA Helmet > PREMIUM CHARACTERISTICS Safety helmet, with a short cap made for working at heights, in the buildings, public works and industry fields. Formed by a helmet and a harness KARA with Screen Holder adapter and Silento helmet headphones Harness formed by: A textile harness with 4 fixing points. A low density polythene head adapter adjustable from 53-63 cm. Includes a lever on the back of the neck locking and a comfort sweatshirt of 32 cm. Helmet formed by: Helmet molded under A.B.S pressure. Lamp socket integrated. Models with or without ventilation. Models with or without cap. Resistant to low temperatures, -30ºC. Electrical isolation for models without ventilation(ebt). 440 V Symbol. Electrically insulating helmet. Used in conjunction with other electrically insulating protective equipment prevent dangerous current from passing through persons via their head. Valid for the model without ventilation. Resistant to molten metals. In the helmet s cap is impressed the manufacture date, use limits and batch number. Usage duration: 48 months. Weight: 340 gr. Valid for the use with the ear muff adaptator Silento. Colours: colour: White. Other colours on request: Yellow, Orange, Green, Blue and Red. s: EN 397 / EN 50365 7
KARA Helmet Head Protection Optional Accessories: Ear muffs. Visors. Goggles. Leather and cotton chinstrap. SILENTO helmet ear muff Mountain type chinstrap with 4 fixing points. Protection Helmets Protection Cap Chinstrap: It s posible to add a chin strap with woven textile with 4 fixing points (with buckle fastening) the KARA becomes a Monteur type hull, for working at heights. Protection goggles KARA helmet can be fitted with polycarbonate anti-shock goggles, anti UV with antiscratch coating. Goggles characteristics: Optical class nº2. Colourless goggle: transmission factor, ultraviolet filter, protection degree 2-1, 2. Protection against low energy impacts, 45 m/s, symbol F. Available with colourless lenses. Usage duration: 48 months. Weight: 40 gr. s: EN 166 / EN 170 WSB10000303 8
IRIS II Helmet Head Protection Protection Cap Protection Helmets IRIS II Helmet > PRO Helmet: Light weight. Resistant to low temperatures. Resistant to the projection of molten metals (MM). Model WITHOUT VENTILATION: Electric properties (440V). Electrically isolating helmet. Used in conjunction with other electrically insulating protective equipment prevent dangerous current from passing through persons via their head. s: EN 50365 Colours: colour: White. Other colours on request: Yellow, Orange, Green, Blue and Red. s: EN 397 / EN 50365 CHARACTERISTICS Helmet for industrial use with integrated panoramic goggle. Suitable for head protection if prescription spectacles are requi- red inside the helmet. Includes: ABS shell. Polycarbonate anti-scratch goggle (AA). Optional: With ventilation. Without ventilation. Version for labels available: consult the possibility of customizing with customer s name. Possibility of frontal and side marking. Goggle: Optical Class 1. Holding in height and depth. Possibility to wear spectacles. 9
3772 Helmet Head Protection 3772 Helmet > EXPERT CHARACTERISTICS Safety helmet with hard material. Composed of: Suitable for: Polyester helmet reinforced with Fiberglass. Textile harness with 6 points. Plastic fixing strap. Leather sweat strap. Industry field. High temperature works, like ovens (+150Cº). Usage with molten metals (MM Marking). Extraordinary conservation in time, thanks to low fragility. Sunlight resistant (UV rays). Limited duration almost exclusively for mechanical damages. Aproximately 10 years life. Suitable for avoid head shocks or reduce the gravity. It s necessary to be perfectly fixed to maximize the protector effect. s: EN 397 Protection Helmets Protection Cap WSB10000107 10
JAGUAR Cap Head Protection Protection Cap Protection Helmets WSB10000191 JAGUAR Cap > PREMIUM CHARACTERISTICS Polyurethane sheath polyamide cap, baseball type. Modern and comfortable design. Equipped with: Polyethilene inner shell. Comfortable neoprene sponge to amortize the shocks. Foam inside for comfort that isolates the head and the shell. Suitable for environments where there is a lower risk of strokes and scratches on the head. Suitable for work positions in the field of: Food industry. Car industry and assembly line. Light boilder. Maintenance works where the helmet use is not required. Dimension adjustable with velcro. Comfortable and safe adjust during long period, thanks to a padding contour. s: EN 812 11
JAGUAR Cap Head Protection Protection Helmets Protection Cap 12
Torrelarragoiti Industrial Polygon, Vial A, Plot 5 48170 ZAMUDIO (Vizcaya) Timetable: 8:00h to 19:00h Tel.: (0034) 946 120 257 Fax: (0034) 944 523 078 www.sibol.es internacional@sibol.es