TYPE APPROVAL CERTIFICATE

<0> DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. E-11781 This is to certify that the Electric Power Cable with type designation(s) CS 90 MBZH YZp & & 0,6/1 kv, CS 90 MBZH YZafp 0,6/1 kv Manufactured by B.V. Twentsche Kabelfabriek HAAKSBERGEN, Netherlands is found to comply with Det Norske Veritas' Rules for Classification of Ships, High Speed & Light Craft and Det Norske Veritas' Offshore Standards IEC 60092-353 (2011-08) IEC 60332-3-22 (2009-02) IEC 60754-1/2 (2011-11) IEC 61034-2 (2005-04) Application General power and lighting. Flame retardant in buch Cat. A. Halogen free. Low smoke. Type Voltage class (kv) Temp. class ( C) CS 90 MBZH YZp & & 0,6/1 kv 0,6/1 90 CS 90 MBZH YZafp 0,6/1 kv 0,6/1 90 Høvik, 2012-07-03 for Det Norske Veritas AS This Certificate is valid until 2016-06-30 Marit Laumann Head of Section DNV local office: Rotterdam Ivar Bull Surveyor This Certificate is subject to terms and conditions overleaf. Any significant change in design or construction may render this Certificate invalid. The validity date relates to the Type Approval Certificate and not to the approval of equipment/systems installed. If any person suffers loss or damage which is proved to have been caused by any negligent act or omission of Det Norske Veritas, then Det Norske Veritas shall pay compensation to such person for his proved direct loss or damage. However, the compensation shall not exceed an amount equal to ten times the fee charged for the service in question, provided that the maximum compensation shall never exceed USD 2 million. In this provision "Det Norske Veritas" shall mean the Foundation Det Norske Veritas as well as all its subsidiaries, directors, officers, employees, agents and any other acting on behalf of Det Norske Veritas. Form No.: TA 1411a Issue: October 2009 Page 1 of 5

Product description Type: CS 90 MBZH YZp HALOGEN FREE 0,6/1 kv CS 90 MBZH YZp HALOGEN FREE 0,6/1 kv CS 90 MBZH YZp HALOGEN FREE 0,6/1 kv Construction: Conductors: Plain or tinned stranded copper class 2, round or sector shaped or class 5 () Core insulation: XLPE Filler: Non hygroscopic tape or Halogen free filler ( and ) Outher sheath: SHF1 1 x 1 4,7 5,3-2 x 1 7,2 7,8-3 x 1 7,6 8,2-4 x 1 8,5 9,1-5 x 1 9,2 9,8-6 x 1 9,9 - - 7 x 1 9,9 - - 8 x 1 11,2 - - 9 x 1 12,1 - - 10 x 1 12,6 - - 11 x 1 12,6 - - 12 x 1 13,0 - - 13 x 1 13,6 - - 14 x 1 13,6 - - 15 x 1 14,6 - - 16 x 1 14,6 - - 17 x 1 15,3 - - 18 x 1 15,3 - - 19 x 1 15,3 - - 20 x 1 16,1 - - 21 x 1 16,1 - - 22 x 1 17,2 - - 23 x 1 17,2 - - 24 x 1 18,0 - - 25 x 1 18,0 - - 26 x 1 18,0 - - 27 x 1 18,4 - - 28 x 1 16,3 - - 29 x 1 19,0 - - 30 x 1 19,0-31 x 1 20,0 - - 32 x 1 20,0 - - 33 x 1 20,0 - - 34 x 1 20,7 - - 35 x 1 20,7 - - 36 x 1 20,7 - - 37 x 1 20,7 - - 1 x 1,5 5,0 5,6-2 x 1,5 7,8 8,6-3 x 1,5 8,2 9,0-4 x 1,5 9,2 9,8-5 x 1,5 10,0 10,6-6 x 1,5 10,8 - - 7 x 1,5 10,8 - - 8 x 1,5 12,3 - - 9 x 1,5 13,2 - - 10 x 1,5 14,0 - - 11 x 1,5 14,0 - - 12 x 1,5 14,4 - - 13 x 1,5 15,1 - - 14 x 1,5 15,1 - - 15 x 1,5 16,0 - - 16 x 1,5 16,0 - - 17 x 1,5 17,0 - - 18 x 1,5 17,0 - - 19 x 1,5 17,0 - - 20 x 1,5 17,9 - - 21 x 1,5 17,9 - - 22 x 1,5 18,9 - - 23 x 1,5 18,9 - - 24 x 1,5 20,0 - - 25 x 1,5 20,0 - - 26 x 1,5 20,0 - - 27 x 1,5 20,4 - - 28 x 1,5 18,1 - - 29 x 1,5 21,1 - - 30 x 1,5 21,1 - - 31 x 1,5 22,2 - - 32 x 1,5 22,2 - - 33 x 1,5 22,2 - - Form No.: TA 1411a Issue: October 2009 Page 2 of 5

34 x 1,5 23,0 - - 35 x 1,5 23,0 - - 36 x 1,5 23,0 - - 37 x 1,5 23,0 - - 1 x 2,5 5,4 6,0-2 x 2,5 8,8 9,4-3 x 2,5 9,3 9,9-4 x 2,5 10,1 10,7-5 x 2,5 11,2 11,8-6 x 2,5 12,2 - - 7 x 2,5 12,2 - - 8 x 2,5 13,6 - - 9 x 2,5 15,0 - - 10 x 2,5 15,6 - - 11 x 2,5 15,6 - - 12 x 2,5 16,1 - - 13 x 2,5 17,1 - - 14 x 2,5 17,1 - - 15 x 2,5 18,0 - - 16 x 2,5 18,0 - - 17 x 2,5 19,0 - - 18 x 2,5 19,0 - - 19 x 2,5 19,0 - - 20 x 2,5 20,3 - - 21 x 2,5 20,3 - - 22 x 2,5 21,3 - - 23 x 2,5 21,3 - - 24 x 2,5 22,6 - - 25 x 2,5 22,6 - - 26 x 2,5 22,6 - - 27 x 2,5 23,1 - - 28 x 2,5 20,5 - - 29 x 2,5 23,9 - - 30 x 2,5 23,9 - - 31 x 2,5 25,0 - - 32 x 2,5 25,0 - - 33 x 2,5 25,0 - - 34 x 2,5 26,0 - - 35 x 2,5 26,0 - - 36 x 2,5 26,0 - - 37 x 2,5 26,0 - - 1 x 4 5,9 6,5-2 x 4 9,8 10,4-3 x 4 10,4 11,2-4 x 4 11,6 12,2-5 x 4 12,6 13,2-1 x 6 6,4 7,0-2 x 6 10,8 11,6-3 x 6 11,7 12,3-4 x 6 12,8 13,4-5 x 6 14,1 14,7-1 x 10 7,2 7,8-2 x 10 12,6 13,2-3 x 10 13,4 14,2-4 x 10 14,9 15,5-5 x 10 16,3 17,1-1 x 16 8,1 8,9 9,9 2 x 16 14,6 15,2 16,9 3 x 16 15,5 16,1 17,8 4 x 16 17,3 17,9 19,6 5 x 16 18,9 19,7 21,2 1 x 25 9,8 10,4 11,6 2 x 25 17,8 18,4 20,1 3 x 25 19,0 19,8 21,3 4 x 25 21,1 21,7 23,4 5 x 25 23,4 24,0 25,7 1 x 35 10,9 11,7 12,7 2 x 35 20,2 20,8 22,5 3 x 35 21,6 22,4 23,9 4 x 35 24,0 24,8 26,3 5 x 35 26,6 27,4 28,9 1 x 50 12,6 13,2 14,9 2 x 50 23,4 24,0 25,7 3 x 50 25,2 25,8 27,5 4 x 50 28,0 28,6 30,3 5 x 50 31,0 31,6 33,3 1 x 70 14,4 15,0 16,7 2 x 70 26,8 27,6 29,1 3 x 70 28,9 29,5 31,2 4 x 70 32,1 32,9 34,4 5 x 70 35,7 36,3 38,5 1 x 95 16,0 16,8 18,3 2 x 95 30,4 31,0 32,5 3 x 95 32,5 33,3 34,8 4 x 95 36,3 36,9 39,1 5 x 95 40,2 41,0 43,0 1 x 120 17,8 18,4 20,1 2 x 120 33,8 34,4 36,6 3 x 120 36,4 37,0 39,2 4 x 120 40,4 41,2 43,2 5 x 120 45,0 45,6 47,8 1 x 150 19,8 20,4 22,1 Form No.: TA 1411a Issue: October 2009 Page 3 of 5

2 x 150 37,6 38,4 40,4 3 x 150 40,5 41,3 43,3 4 x 150 45,4 46,4 48,4 5 x 150 50,4 51,2 53,4 1 x 185 21,7 22,5 24,0 2 x 185 41,8 42,4 44,6 3 x 185 45,0 45,6 47,8 4 x 185 50,4 51,2 53,4 5 x 185 56,0 56,8 59,0 1 x 240 24,3 25,1 26,6 2 x 240 47,2 48,0 50,2 3 x 240 50,7 51,7 53,7 4 x 240 56,6 57,6 59,8 5 x 240 63,0 63,8 66,0 1 x 300 26,7 27,5 29,0 2 x 300 52,0 52,8 55,0 3 x 300 55,9 56,7 58,9 4 x 300 62,5 63,3 65,5 5 x 300 69,4 70,2 72,4 Type: CS 90 MBZH YZafp 0,6/1 kv: 2 1 x 1,5 5,6 2 x 1,5 8,6 3 x 1,5 9 4 x 1,5 9,8 5 x 1,5 10,6 6 x 1,5 11,6 7 x 1,5 11,6 8 x 1,5 12,9 9 x 1,5 14 10 x 1,5 14,6 11 x 1,5 14,6 12 x 1,5 15 13 x 1,5 15,7 14 x 1,5 15,7 15 x 1,5 16,8 16 x 1,5 16,8 17 x 1,5 17,6 18 x 1,5 17,6 19 x 1,5 17,6 20 x 1,5 18,5 2 21 x 1,5 18,5 22 x 1,5 19,7 23 x 1,5 19,7 24 x 1,5 20,6 25 x 1,5 20,6 26 x 1,5 20,6 27 x 1,5 21 30 x 1,5 21,7 32 x 1,5 22,8 37 x 1,5 23,6 1 x 2,5 6 2 x 2,5 9,4 3 x 2,5 9,9 4 x 2,5 10,7 5 x 2,5 11,8 6 x 2,5 12,8 7 x 2,5 12,8 8 x 2,5 14,4 9 x 2,5 15,6 10 x 2,5 16,2 2 11 x 2,5 16,2 12 x 2,5 16,9 13 x 2,5 17,7 14 x 2,5 17,7 15 x 2,5 18,6 16 x 2,5 18,6 17 x 2,5 19,8 18 x 2,5 19,8 19 x 2,5 19,8 20 x 2,5 20,9 21 x 2,5 20,9 22 x 2,5 22,1 23 x 2,5 22,1 24 x 2,5 23,2 25 x 2,5 23,2 26 x 2,5 23,2 27 x 2,5 23,7 30 x 2,5 24,7 32 x 2,5 25,6 37 x 2,5 26,6 Application/Limitation The requirements of SOLAS Amendments Chapter II-1, Part D, Reg. 45, 5.2 (provision to be taken to limit Fire Propagation along Bunches of Cables or Wires) are fulfilled without any additional measures. Type Approval documentation Tests carried out Standard Release General description Limitation Form No.: TA 1411a Issue: October 2009 Page 4 of 5

Standard Release General description Limitation IEC 60092-350 2008-02 General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications IEC 60092-351 2004-04 Insulating materials for shipboard and offshore units, power, control, instrumentation, telecounication and data cables IEC 60092-353 2011-08 Electrical installations in ships - Part 353: Power cables for rated voltages 1kV and 3kV IEC 60092-359 1999-08 Sheathing materials for shipboard power and telecounication cables IEC 60332-3-22 2009-02 Flame retardance in bunch, cat. A IEC 60754-1 1994-01 Test on gases evolved during combustion of materials from cables Determination of the amount of halogen acid gas IEC 60754-2 1997-04 Test on gases evolved during combustion of materials from cables Determination of the degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring ph and condctivity IEC 61034-1/2 2005-04 Measurement of smoke density of cables burning under defined conditions Test apparatus, procedure and requirements Low Halogen: <0,5% Halogen Halogen free: ph > 4,3 Conductivity < 10µS/ Light transmittance > 60% Marking of product TKF - Size - 0,6/1kV - CS 90 mbzh - YZp HALOGEN FREE - {batch nr} TKF - Size - 0,6/1kV - CS 90 mbzh - YZp 0,6/1kV HALOGEN FREE - {batch nr} TKF - Size - Class 5-0,6/1kV - CS 90 mbzh - YZp 0,6/1kV HALOGEN FREE - {batch nr} TKF - Size Class 5 - CS 90 mbzh - YZafp 0,6/1kV {batch nr} Certificate retention survey The scope of the retention/renewal survey is to verify that the conditions stipulated for the Type approval is complied with and that no alterations are made to the product design or choice of materials. The main elements of the survey are: Inspection on factory samples, selected at random from the production line (where practicable) Results from Production Sample Tests (PST) and Routines (RT) checked (if not available tests according to PST and RT to be carried out) Review of type approval documentation Review of possible change in design, materials and performance Ensuring traceability between manufacturer s product type marking and Type Approval Certificate. Survey to be performed at least every second year. END OF CERTIFICATE Form No.: TA 1411a Issue: October 2009 Page 5 of 5