Material Safety Data Sheets for each of these ingredients are attached to serve as the Material Safety Data Sheet for ORGANIC IODINE 20.

Similar documents
MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET Section 1: Product Identification

24 hour Emergency Telephone Contact Number Chauvet

SECTION I - PRODUCT IDENTIFICATION Gallium oxide, powder and pieces. US National Poison Hotline

MATERIAL SAFETY DATA SHEET

*********************** EMERGENCY PHONE #: ************************

MATERIAL SAFETY DATA SHEET. TST Orange Power Drop-Ins

SECTION I - PRODUCT IDENTIFICATION Silicon nitride, powder and pieces. US National Poison Hotline

Material Safety Data Sheet

Material Safety Data Sheet

Safety Data Sheet. BOSS 139 Hi-Temp Mortar. Section 1. Identification. Section 2. Hazards Identification. Synonyms Manufacturer Stock Numbers

Ingredient CAS Number Weight % ACGIH TLV PEL STEL Not Established Not Established

Material Safety Data Sheet Product No Cresyl Violet Acetate, Certified. Issue Date ( ) Review Date ( )

Ingredient CAS Number Weight % ACGIH TLV PEL STEL Hydrochloric acid % %

TETRA O-Sol File: MSDS: OG-157

Section I. Section II - Hazardous Ingredients/Identity Information. Material Safety Data Sheet

Material Safety Data Sheet Sulfamic acid, ACS. Section 1 - Chemical Product and Company Identification

Material Safety Data Sheet Calcium chloride, ACS. Section 1 - Chemical Product and Company Identification

Material Safety Data Sheet Sodium Ammonium Phosphate Solutions. Section 1 - Chemical Product and Company Identification

Inert Ingredients non-hazardous C Specific Gravity (H 2 0 = 1): Percent volatile by volume (%): Available.

International Nutrition, Inc. Safety Data Sheet

MATERIAL SAFETY DATA SHEET

CHAIN GUARD PR-500 SYNTHETIC PROOFER CHAIN LUBRICANT MATERIAL SAFETY DATA SHEET 1. PRODUCT AND COMPANY IDENTIFICATION

Ingredient CAS Number Weight % ACGIH TLV PEL STEL Sodium dichloro-striazinetrione % Not Established Not Established

M A T E R I A L S A F E T Y D A T A S H E E T

M A T E R I A L S A F E T Y D A T A S H E E T

29 CFR Standard must be Form Approved Consulted for specific requirements. OMB No OSHA PEL

Material Safety Data Sheet m-cresol Purple, 0.1% Aqueous. Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET

Vital Earth s PUMICE

Disposal: Place empty container in trash. Give partial or full container to the safety officer.

Material Safety Data Sheet PRODUCT CODE NUMBERS: DYND75221

MATERIAL SAFETY DATA SHEET

M A T E R I A L S A F E T Y D A T A S H E E T

Material Safety Data Sheet

Material Safety Data Sheet Phenylarsine oxide. Section 1 - Chemical Product and Company Identification

SAFETY DATA SHEET (SDS) Stick-It! Rear View Mirror Adhesive

MATERIAL SAFETY DATA SHEET

Section I - IDENTIFICATION SEMENT PATCH SYSTEM. (407) (800) Chemtrec Section II - HAZARDOUS INGREDIENTS PEL. 0.1 mg/m 3 0.

MATERIAL SAFETY DATA SHEET

Ingredient CAS Number Weight % ACGIH TLV PEL STEL Phosphoric Acid mg/m3 1 mg/m3 3 mg/m3

SAFETY DATA SHEET 1. PRODUCT AND COMPANY INFORMATION

Material Safety Data Sheet

Product BLEACH, SODIUM HYPOCHLORITE CERTIFIED TO ANSI/NSF STANDARD 60

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Methyl violet. Section 1 - Chemical Product and Company Identification

SAFETY DATA SHEET Section 1: Product Identification

1. PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDS IDENTIFICATION

Material Safety Data Sheet

Material Safety Data Sheet Potassium phosphate dibasic. Section 1 - Chemical Product and Company Identification

BENZOIN COMPOUND TINCTURE

Material Safety Data Sheet

Material Safety Data Sheet Potassium phosphate, monobasic, ACS. Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET GLUTOSE SECTION 1 - PRODUCT IDENTIFICATION AND HAZARDOUS COMPONENTS

Material Safety Data Sheet

Recommended use of the chemical and restrictions on use: Road stabilization and dust control.

SECTION 1. Product and Company Identification TRAP N'TOSS ATTRACTANT. SECTION 2. Composition/Information on Ingredients TRAP N'TOSS ATTRACTANT

1. PRODUCT IDENTIFICATION 2. COMPOSITION / INFORMATION ON HAZARDOUS INGREDIENTS

M A T E R I A L S A F E T Y D A T A S H E E T

Material Safety Data Sheet Product No Sodium Phosphate, Monobasic, Anhydrous Issue Date ( ) Review Date ( )

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION ISSUE DATE : 2008/01/12 2. COMPOSITION/INFORMATION ON INGREDIENTS

MATERIAL SAFETY DATA SHEET Date Revised: 7/18/2013 Page: 1 Mold Release MSDS Number: SECTION 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET PAGE 1

Material Safety Data Sheet Brij 35, 30% w/v. Section 1 - Chemical Product and Company Identification

SAFETY DATA SHEET Isopropyl Alcohol 70% Product Number: 32

Date Prepared July 28, 2008

M A T E R I A L S A F E T Y D A T A S H E E T

SCALE KLEEN 1. PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDS IDENTIFICATION

Safety Data Sheet Tool Cool Blue Cutting Gel 5/6/2015

MSDS For MICR 7780 RIBBON

MATERIAL SAFETY DATA SHEET. COPPER CARE PRODUCT NAME: Aqua-Nap-5. ATTENTION: SAFETY MANAGER MSDS Number: Date of Last Revision: 04/10/2006

MATERIAL SAFETY DATA SHEET

Safety Data Sheet 3% U.S.P HYDROGEN PEROXIDE

SAFETY DATA SHEET. Product Name: LIQUID SEAWEED CONCENTRATE #3. Page 1 of 5. Classification of the Substance or Mixture. Label Elements.

MATERIAL SAFETY DATA SHEET "W" TEST SOLUTION NFPA HAZARD RATINGS* 2 Moderate health hazard 3 Highly flammable SECTION 1: PRODUCT INFORMATION

MATERIAL SAFETY DATA SHEET Certis USA 9145 Guilford Road, Suite 175 Columbia, Maryland 21046

Material Safety Data Sheet Zinc Metal Powder

M A T E R I A L S A F E T Y D A T A

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Sodium Hypochlorite Solutions, 1-5% w/v. Section 1 - Chemical Product and Company Identification

Safety Data Sheet. 503 Main Street Belle Chasse, LA 70037

Material Safety Data Sheet Magnesium stearate

OSHA regulated. NE NE No No No. NE NE No No No

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET Dry Foam Carpet Shampoo Concentrate. 1. Product and Company Identification. 2. Hazards Identification

MSDS REPORT - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION SAN FERNANDO MISSION BVD MISSION HILLS, CA 91345

SAFETY DATA SHEET Pet Stain and Odor Eliminator. 1. Product and Company Identification. 2. Hazards Identification

Section I: Product and Company Identification Manufactured for: Chauvet

MATERIAL SAFETY DATA SHEET MSDS DATE: 7/08/09 SCENT WINTERGREEN SUPERSEDES: 6/23/08

SAFETY DATA SHEET Potassium Chloride Stock Solution (1 M)

Material Safety Data Sheet Gold Chloride, trihydrate. Section 1 - Chemical Product and Company Identification

SECTION 1 MATERIAL IDENTIFICATION AND INFORMATION % OSHA PEL. Health Flammability Reactivity HMIS Hazard Code NFPA Hazard Code 2 1 1

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET. Page Number:

Transcription:

MATERIAL SAFETY DATA SHEET - ORGANIC IODINE 20 This product contains the following ingredients that are reportable under the Occupational Safety and Health Administration's Hazard Communication Standard, (29 CFR 1910.1200). ETHYLENEDIAMINE DIHYDRIODIDE SALT Material Safety Data Sheets for each of these ingredients are attached to serve as the Material Safety Data Sheet for ORGANIC IODINE 20. Date Prepared: 2/25/99 MATERIAL SAFETY DATA SHEET - ETHYLENEDIAMINE DIHYDRIODIDE SECTION 1 - IDENTIFICATION MANUFACTURER: DEEPWATER CHEMICALS, INC., 1210 Airpark Road, Woodward, Oklahoma 73801 EMERGENCY PHONE NUMBER: (800) 854-4064 or CHEMTREC (800) 424-9300 EFFECTIVE DATE: 4/4/89 REVISED DATE: 10/12/95 CHEMICAL NAME: Ethylenediamine Dihydriodide TRADE NAME: EDDI CAS NUMBER: 5700-49-2 CHEMICAL FAMILY: Amine salt CHEMICAL FORMULA: C2H6N2-2HI FORMULA WEIGHT: 313.91 SECTION 2 - HAZARDOUS INGREDIENTS HAZARDOUS COMPONENTS: Ethylenediamine Dihydriodide; HAZARDOUS: 99%; PROD. CAS #: 5700-49-2; TLV (units): Not established. SECTION 3 - PHYSICAL DATA BOILING POINT: NA FREEZING POINT: NA VOLATILITY / VOL (%): NA VAPOR PRESSURE: NA

VAPOR DENSITY (Air = 1): NA SOLUBILITY IN H20: Greater than 50% by weight APPEARANCE/ODOR: Colorless to light yellow, crystalline powder SPECIFIC GRAVITY(H2O=1): Not determined EVAPORATION RATE (H2O=1): NA ph: 4.5-5 for a 5% aqueous solution SECTION 4 - FIRE AND EXPLOSION DATA FLASH POINT: NA LOWER FLAME LIMIT: NA HIGHER FLAME LIMIT: NA EXTINGUISH MEDIA: Carbon dioxide, dry chemical powder, foam. FOR FIRE: Wear a self-contained breathing apparatus. USUAL FIRE HAZARD: While ethylenediamine dihydriodide is not flammable, toxic iodine vapor may be liberated during a fire. SECTION 5 - HEALTH HAZARD DATA HEALTH HAZARDS: Dust is irritating to the respiratory tract. Skin contact may cause an allergic response. Contact with moist skin may result in minor burns. TOXICITY DATA: Not established CARCINOGENICITY: Not reported MUTAGENICITY: Not reported REPRODUCTIVE EFFECTS: None reported TERATOGENCITY: Not reported OVER EXPOSURE EFFECTS: Prolonged exposure may cause skin rash, irritation of the respiratory tract, and headache. Some individuals are extremely susceptible to an allergic response following exposure to iodides. FIRST AID PROCEDURES: EYE CONTACT: Rinse with water for at least 15 minutes. SKIN CONTACT: Immediately wash thoroughly with soap and water. Remove contaminated clothing. INGESTION: Drink a large quantity of water to dilute the salt. INHALATION: Remove to fresh air and support breathing as necessary. SECTION 6 - REACTIVITY DATA CHEMICAL STABLITY: Stable CONDITION TO AVOID: Strong oxidizing agents and strong alkali INCOMPATIBLE MATERIALS: Strong oxidizing agents, alkaline materials, and moist copper salts.

DECOMPOSITION PRODUCTS: While generally stable, exposure to strong oxidizing agents or sunlight in a moist environment may result in the liberation of iodine. HAZARDOUS POLYMERIZATION: Will not occur POLYMERIZATION AVOID: NA SECTION 7 - SPILL OR LEAK PROCEDURE FOR SPILL: Sweep up the solid crystals, place in a container, and either recycle or dispose of in an approved method. WASTE DISPOSAL METHOD: Burn in a chemical incinerator equipped with an afterburner and scrubber. Contact the manufacturer concerning recycle possibilities. SECTION 8 - SPECIAL PROTECTION RESPIRATORY PROTECTION: Wear a NIOSH/MSHA approved dust mask. VENTILATION: Local exhaust PROTECTIVE GLOVES: Rubber or plastic gloves EYE PROTECTION: Chemical safety glasses or goggles OTHER PROTECTIVE EQUIPMENT: None required HANDLING AND STORAGE: Store in a cool (<100 F), dark place. Do not expose to direct sunlight. Do not store in open, unlabeled containers. SECTION 9 - SPECIAL PRECAUTIONS SPECIAL SHIPPING INFORMATION: None required HAZARD CLASS: Not hazardous DOT SHIPPING NAME: Ethylenediamine Dihydriodide REPORTABLE QUANTITY (RQ): Not established UN NUMBER: None PACKAGING SIZE: 100 pound or 50 kg drums SECTION 10 - PREPARATION OF MSDS PREPARED BY: D.G. Mason PHONE NUMBER OF PREPARER: (405) 256-0500 The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. Deepwater Chemicals shall not be held liable for any damage resulting from handling or from contact with the above product.

MATERIAL SAFETY DATA SHEET - SALT SECTION 1 - GENERAL INFORMATION MANUFACTURER: Cargill Incorporated - Salt Division, P.O. Box 5621, Minneapolis, MN 55440 GENERAL SERVICES ADMINISTRATION NATIONAL STOCK NUMBER: 6810-00-227-0437 CONTACT: Director-Quality Admin. PHONE NO: (612) 742-6581 TRADE NAME (Common Name or Synonym): Salt C.A.S. NO(S): 7647-14-5 CHEMICAL NAME (S): Sodium Chloride FORMULA: NaCl MOLECULAR WEIGHT: 58.44 DATE ISSUED: 8/1/85 DATE REVISED: 4/28/93 SECTION 2 - HAZARDOUS INGREDIENTS / IDENTITY INFORMATION None THIS PRODUCT IS NOT REGULATED UNDER: OSHA Hazard Communication Standard 29 CFR 1910.1200 S.A.R.A. Title III SECTION 3 - PHYSICAL / CHEMICAL CHARACTERISTICS BOILING POINT (760 mm Hg)( C): 1465 VAPOR PRESSURE (mm Hg / 747 C): 2.4 VAPOR DENSITY (Air =1): NA SOLUBILITY IN WATER (g/cc,%): 26.4 SPECIFIC GRAVITY (H2O = 1): 2.16 MELTING POINT ( C): 801 EVAPORATION RATE (Butyl Acetate = 1): NA APPEARANCE AND ODOR: White crystalline solid with slight halogen odor. SECTION 4 - FIRE AND EXPLOSION HAZARD DATA FLASH POINT (Method Used): NA FLAMMABLE LIMITS: LEL: NA; UEL: NA EXTINGUISHING MEDIA: NA. This product is nonflammable.

SPECIAL FIRE-FIGHTING PROCEDURES / EQUIPMENT: NA UNUSUAL FIRE AND EXPLOSION HAZARDS: None SECTION 5 - REACTIVITY DATA STABILITY: Stable CONDITIONS TO AVOID: Contact with strong acids. INCOMPATIBILITY (Materials to Avoid): Becomes corrosive to metals when wet. HAZARDOUS DECOMPOSITION OR BYPRODUCTS: May evolve chlorine gas when in contact with strong acids. HAZARDOUS POLYMERIZATION: Will not occur CONDITIONS TO AVOID: NA SECTION 6 - HEALTH HAZARD DATA ROUTE(S) OF ENTRY INHALATION: May cause mild irritation of nose and throat. SKIN: Dust may cause mild irritation. INGESTION: Ingestion of large amounts may cause gastrointestinal upset. HEALTH HAZARDS (Acute and Chronic): Ingestion of large amounts (greater than 0.1 pound) can cause gastrointestinal upset and irritation of the stomach. No applicable information found for chronic systemic effects. CARCINOGENICITY: NTP? Not listed as a carcinogen or mutagen. IARC Monographs? Not listed as a carcinogen or mutagen. OSHA Regulated? Not listed as a carcinogen or mutagen. SIGNS AND SYMPTOMS OF EXPOSURE INHALATION: Slight irritation of the nose; sneezing. SKIN CONTACT: Irritation; inflammation. INGESTION: Nausea; vomiting. MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE: In some cases of confirmed hypertension, ingestion may result in elevated blood pressure. (This applies only to salt-sensitive individuals.) EMERGENCY AND FIRST AID PROCEDURES INHALATION: If person breathes large quantities, remove to fresh air at once. If breathing stops, apply artificial respiration immediately. SKIN CONTACT: Remove clothing from affected area. Wash skin thoroughly. Rinse carefully. For eye contact, flush with water immediately, lifting eyelids occasionally. INGESTION: Less than a few grams would not be harmful. For larger quantities, drink large amounts of water or milk. EMERGENCY TELEPHONE NUMBERS: Daytime (612) 475-6581 - Evenings (612) 476-1127 (Minnesota)

SECTION 7 - PRECAUTIONS FOR SAFE HANDLING AND USE STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Contain spills to prevent contamination of water supply or sanitary sewer system. Vacuum or sweep into containers for proper disposal. WASTE DISPOSAL METHOD: For disposal of this material as a waste, act in accordance with all applicable Federal, state and local waste management regulations. PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE: Avoid humid or wet conditions as product will cake and become hard. OTHER PRECAUTIONS: NA SECTION 8 - CONTROL MEASURES RESPIRATORY PROTECTION (Specify Type): NIOSH/MSHA approved respirator for particulates. VENTILATION: LOCAL EXHAUST: Ventilate as required to maintain airborne particulates below occupational exposure limits. MECHANICAL (General): Dust collection equipment may be employed. SPECIAL / OTHER: NA PERSONAL PROTECTIVE EQUPMENT PROTECTIVE GLOVES: Normal work gloves are adequate. EYE PROTECTION: Eyeglasses or goggles should be worn in dusty areas. OTHER PROTECTIVE CLOTHING OR EQUIPMENT: Protective clothing may be worn in dusty areas, but is generally not required. WORK/HYGIENE PRACTICES: Warm water showering and handwashing is suggested after working in extremely dusty areas. All statements, technical information and recommendations contained herein are, to the best of our knowledge, reliable and accurate; however, no warranty, either express or implied, is made with respect thereto, nor will any liability be assumed for damages resultant from the use of the material described. It is the responsibility of the user to comply with all applicable federal, state and local laws and regulations. It is also the responsibility of the user to maintain a safe workplace. The user should consider the health hazards and safety information provided herein as a guide and should take the necessary steps to instruct employees and to develop work practice procedures to ensure a safe work environment. This information is not intended as a license to operate under, or a recommendation to practice or infringe upon any patent of this Company or others covering any process, composition of matter or use.