Friction Stays: for PVC, timber and aluminium windows HIGH PERFORMANCE

Similar documents
Friction Stays: for PVC, timber and aluminium windows HIGH PERFORMANCE

Schlegel Bristle Brush: superior filament and flame retardant brush WORLD S LEADING NON CORROSIVE RIGID BACKED

Window Replacement Hardware

F13.11 PARALLEL HINGES F13 PROJECT-OUT WINDOWS AND TOP HUNG WINDOWS

Freshware have a comprehensive range of products for window

Product information VELUX INTEGRA flat roof window CVP

Water Polo Goals. Anti Goal - FINA 1080mm CODE PRODUCT DESCRIPTION WEIGHT VOLUME. 750mm 1080mm

Bicycle Parking. Product Catalogue. World Leader in Bicycle Parking

ATHLETICS Track & Field Equipment

Slide and Turn System SF25

INSTALLATION INSTRUCTIONS PUSH BAR PULLMAN PANIC BOLT DEVICE TO EN 1125 : 2008

IGUMA - IGU Design Limitations

Kestrel Aluminium Systems Limited. Product Manual Section 10 Thermal Framing System. Manual Version

Insulated Door Components. Tension Spring System. High performance hardware door system for residential applications

About. providing superior performance and reliability. Bromic regulators are AGA or UL144 approved.

K13.12 FACE FIXED PANIC EXIT DEVICE K13 DOORS

Full Batten 2 Systems

CE conform applications according to EN Windows without thermal break Systems Forster presto and Forster norm

13 - Fishing Accessories - Bait Stations

Telescopic winch handle Speedfriend"

Product: Aluminium Door Edge Guard

WE RE ALL ABOUT SAFETY CYCLONIC GARAGE DOORS BUILT TO LAST. MADE TO PERFORM

Product: Aluminium Door Edge Guard

Skylight Rollers For Velux windows

SPYDA TEMPORARY ANCHOR POINT

MAKE BOLLARD IMPACT RESISTANT PROTECT FOUNDATIONS RE-USE BOLLARD

10.2. Basketball Single Post System

SafidDampers. Class 1A & Class 1 Low Leakage Volume Control Damper ( Flange Type ) SPK Standard Construction. Description SPK

Composite Fencing. Transform gardens with stylish, low-maintenance composite fencing

rondo aluminium components

New Range. Headboards & Clewboards

ECP Series Explosionproof Enclosures for OEM Applications. Optimized design, extensive sizes, and fast lead times.

Slide and Turn System SF35

Precision matters. HiQ equipment for specialty gases.

PNEUMATIC CONNECTORS SELECTION

everest efficiency weather tightness durability er tightness durability energy efficiency royalplast.ca

Press-fit Joining System for Copper Tube

Technical information for hinges

COBALT BULLETPROOF PRODUCTS. Architect: J.-L. Bonnet Photography: Serge D ly

Best Materials Durability Portability 15-Minute Set-up Easy Storage

SERIES A24 RAISED RIB

S.R.A. Fully Engineered Product Range

CFSW. Hinges with built-in safety multiple switch

500 SERIES. Standard-Duty Grade 3 Surface Applied Closers. Standard Features. 3 hours fire rated. door openings. closing speeds

This ramp features levelling feet with angle and length adjustable legs to guarantee a stable and level base.

SERIES E30 RAISED RIB

DICTATOR "DIREKT" Gate Closer

400 Series Circle & Oval Windows (1991 to Present)

Goals are crucial pieces of equipment. They should be good quality in terms of both playing performance and durability.

Beauty-Line Windows (1957 to 1979)

VENTILATOR OPTIONS. Please visit our web page to view all the available options and for a specification.

Evidence of Performance. Class 4. Class 5A. Class C5 / B5. Test Report No PR01. ift Rosenheim

EMERGENCY WALL MOUNTED HAND OPERATED DELUGE SHOWER

VELUX Now in plastic dome sizes...at plastic dome prices

DICTATOR "DIREKT" Gate Closer

Straightaway 130. Sliding & Folding Door Systems. Product Overview. Features. Technical Specifications. Coburn Product Data Sheet

SYSTEMS CEILING. [ Between us, ideas become reality. ] AXIOM Perimeter Trim

Aluminium sun protection lamella rolled ASG

The M-UPPT is an universal punch tool. Different punch inserts can be easily switched out. Pin to fix and remove inserts

hockey hockey Integral Weighted Goals Aluminium Goals Fence Folding Goals Premier Hockey Goals Folding Wheelaway Goals

relief valves R6000 Series

Ducted Reverse Cycle Air Conditioning of Distinction

CR Series. Special doors for clean room application

REGULATIONS OF THE PADEL GAME INTERNATIONAL PADEL FEDERATION

These products are available only in packs of 100 pieces

WALL MOUNTED EMERGENCY EYE & EYE/FACE WASH HAND OPERATED

Supplementary Certificate of Approval. No S433

MOVEMENT IN A STATIONARY WORLD

For optimal strength and durability, we use a co-extrusion process of 3 different PVCs in the manufacturing of our pool cover slats.

Pre-Calibrated Models

H11.13 PIVOTS SERIES 490 H11 HORIZONTAL AND VERTICAL PIVOT WINDOWS

Boat Boat Loader Fitting Instructions

The Modular Pool Professionals Judged Best Modular Pool in Australia by SPASA

System 100: 110 x 54mm Rectangular Ducting and Fittings 5 7. System 125: 150 x 70mm Rectangular Ducting and Fittings 8 9

CHANNEL & SUPPORT SYSTEMS

Sit to Stand Umbilical Solutions

Paper Tiger Catamaran International Association MEASUREMENT FORM

HYDROCHLOR. Salt water pool chlorinator.

Abrasive mop discs Applications guide

5 year warranty. Comprehensive selection available. Platforms, Flask Clamps, Tube Racks. VWR Shaker Accessories

TECHNICAL DATASHEET ELSA MUSTER ESCAPE BREATHING APPARATUS DESCRIPTION APPLICATIONS

New Product Update - September 2017

K16.10 EDGE DOOR HANDLES K16 DOORS

THE ULTIMATE IN MODULAR SYSTEM DESIGN

Homestead Series 820 AWWA Butterfly Valves

BASKETBALL. ORDER ONLINE AT

OCEAN - Wellness Line

Inverse Proportional Pressure-Relief Cart., Size 2 4

GEZE ActiveStop New door control

relief valves Circle Seal Controls 2301 Wardlow Circle Corona, CA Phone (951) Fax (951)

PRODUCTIVITY THROUGH SPEED, STRENGTH & ACCESS HIGHLIGHTS PRODUCT BROCHURE

Specifications For Threaded and Butt Weld Hammer Unions

Introduction. Steel balls. Cage

Belt strength. Available the belt. (kg/m)

Workshop Compressors CLASSIC Series

FEATURES. Welded Sash and Main Frame. Swiggle or DuraSeal Spacer System on Fixed Units. 3-1/4" Frame Depth. True Sloped Sill. Integral J Channel

Workshop Compressors CLASSIC Series

badminton badminton Premier Posts Competition Socketed Posts Competition Floor Fixed Posts Training Posts Schools Posts

Fire- & smoke- tight sliding door FST High quality for demanding architecture

Blum TANDEM Concealed Runner

Transcription:

Friction Stays: for PVC, timber and aluminium windows HIGH PERFORMANCE

CONTENTS Friction stays: four bar for projecting sashes 4 Friction stays: for superior weather sealing 12 Friction stays: three bar for projecting sashes 22 Friction stays: for restricted window openings 25 Friction stays: project gallery 26 2 www.schlegel.com

Window Hinges: high performance friction stays Schlegel offer a comprehensive range of smooth operating, adjustable, high performance friction stays for top-hung PVC, timber and aluminium windows. Offering superior weather-proofing, draught-proofing and guaranteeing long-lasting smooth operation. Schlegel friction hinges are made with the latest technology to be fitted with the minimum of effort and slotted fixing holes allow for maximum adjustment. The stays have been proven to a lifetime of up to 30,000 cycles Available in 8 26 variants (20.32cm - 66.04cm) 13 to 18 mm stack height variants suitable for all popular profiles Concealed when the window is closed and offers no internal obstruction when opened All stays supplied as a pair Built to last Comply with Australian Standards www.schlegel.com 3

Friction Stays: four bar for projecting sashes A range of four bar friction stays designed to provide support for standard projecting sashes. Suitable for side hung (casement) PVC, timber or aluminium windows (300C series only) Suitable for top hung (awning) PVC, timber or aluminium windows Available in five sizes for sash weights of up to 43 kgs Non-friction options available on request Available in black Designed for window cavities of 33 x 13 mm Cycle tested to 30,000 cycles Manufactured from T6 extruded aluminium and custom nylon compounds Tested to meet specific operating force requirements Fits existing window profiles 30,000 Cycles* Code Description Max sash Max sash Max sash Opening weight height width BP235B Awning 235 mm Friction 6 kg 750 mm N/A 45 BP235BNF Awning 235 mm Non-Friction 6 kg 750 mm N/A 45 * Colour Black 4 www.schlegel.com

Code Description Max sash Max sash Max sash Opening weight height width BP335B Awning 330 mm Friction 9 kg 00 mm N/A 35 BP335BNF Awning 330 mm Non-Friction 9 kg 00 mm N/A 35 * Colour Black 30,000 Cycles* Code Description Max sash Max sash Max sash Opening weight height width BP440B Awning 440 mm Friction 15 kg 1800 mm N/A 20 20 kg 1500 mm N/A 20 43 kg 1200 mm N/A 20 BP440BNF Awning 440 mm Non-Friction 15 kg 1800 mm N/A 20 20 kg 1500 mm N/A 20 43 kg 1200 mm N/A 20 * Colour Black www.schlegel.com 5

Code Description Max sash Max sash Max sash Opening weight height width BP5B Awning 512 mm Friction 12 kg 1300 mm N/A 27 BP5BNF Awning 512 mm Non-Friction 12 kg 1300 mm N/A 27 * Colour Black 30,000 Cycles* Code Description Max sash Max sash Max sash Opening weight height width BP305CB Casement 312 mm Friction 20 kg N/A 750 mm 55 * Colour Black 6 www.schlegel.com

Code Description Max sash Max sash Max sash Opening weight height width BPCHH245B Awning 245 mm Friction 8 kg 800 mm N/A 40 BPCHH245BNF Awning 245 mm Non-Friction 8 kg 800 mm N/A 40 * Colour Black 30,000 Cycles* Code Description Max sash Max sash Max sash Opening weight height width BPCHH335B Awning 335 mm Friction kg 00 mm N/A 38 * Colour Black www.schlegel.com 7

Code Description Max sash Max sash Max sash Opening weight height width BPCHH435B Awning 435 mm Friction 16 kg 1200 mm N/A 28 * Colour Black 30,000 Cycles* Code Description Max sash Max sash Max sash Opening weight height width BPCHH440B Awning 440 mm Friction 15 kg 1800 mm N/A 20 20 kg 1500 mm N/A 20 43 kg 1200 mm N/A 20 * Colour Black 8 www.schlegel.com

30,000 Cycles* Code Description Max sash Max sash Max sash Opening weight height width BPCHH305B Casement 305 mm Friction 20 kg N/A 750 mm 48 * Colour Black www.schlegel.com 9

Stay selection matrix for 3 and 4 mm glazing Sash height Sash width (mm) (mm) 300 400 500 600 700 800 900 00 10 1200 1300 1400 1500 1600 1700 1800 500 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 600 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP335 BP335 BP335 BP335 BP335 BP335 700 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) 800 BP235 BP235 BP235 BP235 BP235 BP235 BP335(1) BP335(1) BP335(1) BP335(1) BP5 BP5 BP5 BP5 BP5 BP5 900 BP235 BP235 BP235 BP235 BP235 BP235 BP335 BP335 BP335 BP335 BP5 BP5 BP5 BP5 BP5 BP5 00 BP235 BP335 BP335 BP335 BP335 BP335 BP335 BP335 BP5 BP440 BP440 BP440 BP440 BP440 BP440 BP440 10 BP335 BP335 BP335 BP335 BP335 BP335 BP5 BP440 BP440 BP440 BP440 BP440 BP440 BP440 BP440 BP440 1200 BP335 BP335 BP335 BP335 BP5 BP5 BP440 BP440 BP440 BP440 BP440 BP440 BP440 BP440 BP440 BP440 1300 BP335 BP335 BP335 BP5 BP5 BP440 BP440 BP440 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A 1400 BP335 BP335 BP5 BP5 BP440 BP440 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A 1500 BP335 BP5 BP5 BP440 420HDA BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A 1600 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A N/A 1700 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A N/A N/A 1800 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A N/A N/A N/A Stay selection matrix for 5 mm glazing Sash height Sash width (mm) (mm) 300 400 500 600 700 800 900 00 10 1200 1300 1400 1500 1600 1700 1800 500 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 600 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 700 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP335(1) BP335(1) BP335(1) BP335 BP335 BP335 BP335 BP335 800 BP235 BP235 BP235 BP235 BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335 BP335 BP335 BP335 BP335 900 BP235 BP235 BP335 BP335 BP335 BP335 BP335 BP335 BP335 BP335 BP335 BP335 BP335 BP335 BP335 BP335 00 BP235 BP335 BP335 BP335 BP335 BP335 BP335 BP5 BP440 BP440 BP440 BP440 BP440 BP440 BP440 BP440 10 BP335 BP335 BP335 BP335 BP335 BP5 BP5 BP440 BP440 BP440 BP440 BP440 BP440 BP440 BP440 BP440 1200 BP335 BP335 BP335 BP5 BP5 BP440 BP440 BP440 BP440 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) 1300 BP335 BP335 BP5 BP5 BP440 BP440 BP440 BP440 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A 1400 BP335 BP5 BP5 BP5 BP440 BP440 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A 1500 BP5 BP5 BP5 BP440 BP440 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A 1600 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A N/A 1700 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A N/A N/A 1800 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A N/A N/A N/A Stay selection matrix for 6 mm glazing Sash height Sash width (mm) (mm) 300 400 500 600 700 800 900 00 10 1200 1300 1400 1500 1600 1700 1800 500 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 600 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 700 BP235 BP235 BP235 BP235 BP235 BP235 BP335(1) BP335(1) BP335(1) BP335(1) BP335 BP335 BP335 BP335 BP335 BP335 800 BP235 BP235 BP235 BP235 BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335 BP335 BP335 BP335 BP335 BP335 900 BP235 BP335 BP335 BP335 BP335 BP335 BP335 BP335 BP335 BP440 BP440 BP440 BP440 BP440 BP440 BP440 00 BP235 BP335 BP335 BP335 BP335 BP335 BP5(1) BP440 BP440 BP440 BP440 BP440 BP440 BP440 BP440 BP440 10 BP335 BP335 BP335 BP335 BP5 BP5 BP440 BP440 BP440 BP440 BP440 BP440 BP440 BP440 BP440 BP440 1200 BP335 BP335 BP5 BP5 BP440 BP440 BP440 BP440 BP440 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) 1300 BP335 BP5 BP5 BP5 BP440 BP440 BP440 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A 1400 BP5 BP5 BP5 BP5 BP440 BP440 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A 1500 BP5 BP5 BP5 BP440 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A 1600 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A N/A 1700 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A N/A N/A 1800 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A N/A N/A N/A Unless stated these calculations conform to NZS 4211. NOTES: (1) Handle force may exceed NZS 4211 sec 9,2. (2) For compliance with NZS 4211 Schlegel four bar stay must be used. www.schlegel.com

Stay selection matrix for 8 mm and double 4 mm glazing Sash height Sash width (mm) (mm) 300 400 500 600 700 800 900 00 10 1200 1300 1400 1500 1600 1700 1800 400 N/A N/A N/A N/A N/A N/A N/A BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) 500 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) 600 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) 700 BP235 BP235 BP235 BP235 BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335 BP335(1) BP335(1) BP335(1) 800 BP235 BP235 BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP440(1) BP440(1) BP440(1) BP440(1) BP440(1) BP440(1) BP440(1) 900 BP335 BP335 BP335 BP335 BP335 BP335 BP5(1) BP440(1) BP440(1) BP440(1) BP440(1) BP440(1) BP440(1) BP440(1) BP440(1) BP440(1) 00 BP335 BP335 BP335 BP335 BP5(1) BP5(1) BP440(1) BP440(1) BP440(1) BP440 BP440 BP440 BP440 BP440 BP440 BP440 10 BP335 BP335 BP5 BP5 BP5(1) BP440(1) BP440(1) BP440 BP440 BP440 BP440 BP440 BP440 BP440 BP440 BP440 1200 BP335 BP5 BP5 BP5 BP440 BP440(1) BP440 BP440 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) 1300 BP5 BP5 BP5 BP5 BP440 BP440 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A 1400 BP5 BP5 BP5 BP440 BP440 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A 1500 BP5 BP5 BP5 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A 1600 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A N/A 1700 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A N/A N/A 1800 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A N/A N/A Stay selection matrix for mm and double 5 mm glazing Sash height Sash width (mm) (mm) 300 400 500 600 700 800 900 00 10 1200 1300 1400 1500 1600 1700 1800 400 N/A N/A N/A N/A N/A N/A N/A BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) 500 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) 600 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) 700 BP235 BP235 BP235 BP235 BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335 BP335(1) BP335(1) BP335(1) 800 BP235 BP235 BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP440(1) BP440(1) BP440(1) BP440(1) BP440(1) BP440(1) BP440(1) 900 BP335 BP335 BP335 BP335 BP335 BP335 BP5(1) BP440(1) BP440(1) BP440(1) BP440(1) BP440(1) BP440(1) BP440(1) BP440(1) BP440(1) 00 BP335 BP335 BP335 BP335 BP5(1) BP5(1) BP440(1) BP440(1) BP440(1) BP440 BP440 BP440 BP440 BP440 BP440 N/A 10 BP335 BP335 BP5 BP5 BP5(1) BP440(1) BP440(1) BP440 BP440 BP440 BP440 BP440 BP440 N/A N/A N/A 1200 BP335 BP5 BP5 BP5 BP440 BP440(1) BP440 BP440 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A 1300 BP5 BP5 BP5 BP5 BP440 BP440 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A N/A 1400 BP5 BP5 BP5 BP440 BP440 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A N/A N/A 1500 BP5 BP5 BP5 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A N/A N/A N/A 1600 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A N/A N/A N/A N/A 1700 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A N/A N/A N/A N/A 1800 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A N/A N/A N/A N/A N/A Stay selection matrix for 12 mm and double 6 mm glazing Sash height Sash width (mm) (mm) 300 400 500 600 700 800 900 00 10 1200 1300 1400 1500 1600 1700 1800 400 N/A N/A N/A N/A N/A N/A N/A BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) 500 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) BP235(1) 600 BP235 BP235 BP235 BP235 BP235 BP235 BP235 BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) 700 BP235 BP235 BP235 BP235 BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335 BP335(1) BP335(1) BP335(1) 800 BP235 BP235 BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP335(1) BP440(1) BP440(1) BP440(1) BP440(1) BP440(1) BP440(1) BP440(1) 900 BP335 BP335 BP335 BP335 BP335 BP335 BP5(1) BP440(1) BP440(1) BP440(1) BP440(1) BP440(1) BP440(1) BP440(1) N/A N/A 00 BP335 BP335 BP335 BP335 BP5(1) BP5(1) BP440(1) BP440(1) BP440(1) BP440 BP440 BP440 N/A N/A N/A N/A 10 BP335 BP335 BP5 BP5 BP5(1) BP440(1) BP440(1) BP440 BP440 BP440 BP440 N/A N/A N/A N/A N/A 1200 BP335 BP5 BP5 BP5 BP440 BP440(1) BP440 BP440 BP440(2) BP440(2) N/A N/A N/A N/A N/A N/A 1300 BP5 BP5 BP5 BP5 BP440 BP440 BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A N/A N/A N/A 1400 BP5 BP5 BP5 BP440 BP440 BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A N/A N/A N/A N/A 1500 BP5 BP5 BP5 BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A N/A N/A N/A N/A N/A 1600 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A N/A N/A N/A N/A N/A 1700 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 1800 BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) BP440(2) N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Unless stated these calculations conform to NZS 4211. NOTES: (1) Handle force may exceed NZS 4211 sec 9,2. (2) For compliance with NZS 4211 Schlegel four bar stay must be used. www.schlegel.com 11

Standard Friction Stays: top hung windows A range of high-performance friction stays offering major advances in fitting, weather sealing and operational performance. Suitable for side hung (casement) or top hung (awning) PVC, timber or aluminium windows Innovative end cap design ensures optimum weather sealing in closed position Proven performance under negative wind load Heavy and light duty options Sash weight - from 12-90 kg (awning) from 24-42 kg (casement) Designed for standard window cavities of 12-18 mm Can be screwed or riveted to the frame and sash Manufactured from a combination of high quality 304 grade stainless steel and nylon components offering improved durability Cycle tested to 25,000 cycles Adjustable friction mechanism 25,000 Cycles SS 304 Stainless Size Stack height Max. sash Max. sash Opening angle Code ( ) (mm) (mm) height (mm) weight (kg) / distance (º) BP8TH 8 203,5 13 350 12 73 12 www.schlegel.com

Size Stack height Max. sash Max. sash Opening angle Code ( ) (mm) (mm) height (mm) weight (kg) / distance (º) BPTH 254 13 400 14 84 25,000 Cycles SS 304 Stainless Size Stack height Max. sash Max. sash Opening angle Code ( ) (mm) (mm) height (mm) weight (kg) / distance (º) BP12TH 12 305 13 550 16 87 www.schlegel.com 13

Size Stack height Max. sash Max. sash Opening angle Code ( ) (mm) (mm) height (mm) weight (kg) / distance (º) BP16TH 16 402,5 13 800 20 60 25,000 Cycles SS 304 Stainless Size Stack height Max. sash Max. sash Opening angle Code ( ) (mm) (mm) height (mm) weight (kg) / distance (º) BP20TH 20 502,5 13 900 24 45 14 www.schlegel.com

40º nominal 38 125,9 95,1 99 31,8 2 602 nominal 166 187 13 nominal 25,000 Cycles SS 304 Stainless Size Stack height Max. sash Max. sash Opening angle Code ( ) (mm) (mm) height (mm) weight (kg) / distance (º) BP24TH 24 602 13 1200 35 40 www.schlegel.com 15

25,000 Cycles SS 304 Stainless Size Stack height Max. sash Max. sash Opening Code ( ) (mm) (mm) width (mm) weight (kg) angle (º) BP12SH 12 305 14,5 650 24 85 16 www.schlegel.com

25,000 Cycles SS 304 Stainless Size Stack height Max. sash Max. sash Opening Code ( ) (mm) (mm) width (mm) weight (kg) angle (º) BP16SH 16 414 14,5 800 30 85 www.schlegel.com 17

Heavy Duty Friction Stays: top hung windows 25,000 Cycles SS 304 Stainless Size Stack height Max. sash Max. sash Opening angle Code ( ) (mm) (mm) height (mm) weight (kg) / distance (º) BPHDC 263 15,5 762 50 82 18 www.schlegel.com

25,000 Cycles SS 304 Stainless Size Stack height Max. sash Max. sash Opening angle Code ( ) (mm) (mm) height (mm) weight (kg) / distance (º) BP16HDC 16 414,5 15,5 1120 63 82 www.schlegel.com 19

25,000 Cycles SS 304 Stainless Size Stack height Max. sash Max. sash Opening angle Code ( ) (mm) (mm) height (mm) weight (kg) / distance (º) BP22HD 22 567,5 15,5 1321 74 82 20 www.schlegel.com

32,5 14 51 234 121,5 12,5 35,5 320 264,5 683 nominal 25,000 Cycles SS 304 Stainless Size Stack height Max. sash Max. sash Opening angle Code ( ) (mm) (mm) height (mm) weight (kg) / distance (º) BP26HD 26 683 16,5 1800 90 23 www.schlegel.com 21

Friction Stays: three bar for projecting sashes A unique range of narrow style friction stays designed to provide support for standard projecting sashes. Suitable for side hung (casement) and top hung (awning), timber or aluminium windows Available in four sizes for sash weights of up to 12 kgs Adjustable composite slide block that provides friction and non-friction feature enabling stays to be used with or without operators Incorporates clip release feature - improving window serviceability Designed to suit narrow style joinery profiles Cycle tested to 30,000 cycles and above Manufactured from 304 grade stainless steel and custom nylon compounds Fits existing window profiles 30,000 Cycles* SS 304 Stainless Code Description Max sash Max sash Max sash Opening weight height width BT200 Awning 203 mm 6 kg 530 mm 900 mm 70 BT200 Casement 203 mm kg 1350 mm 635 mm 70 22 www.schlegel.com

Code Description Max sash Max sash Max sash Opening weight height width BT300 Awning 305 mm 7 kg 700 mm 800 mm 90 BT300 Casement 305 mm 12 kg 1350 mm 700 mm 90 30,000 Cycles* SS 304 Stainless Code Description Max sash Max sash Max sash Opening weight height width BT400 Awning 407 mm 9,5 kg 990 mm 900 mm 90 BT400 Casement 407 mm 12 kg 1350 mm 840 mm 90 www.schlegel.com 23

30,000 Cycles* SS 304 Stainless Code Description Max sash Max sash Max sash Opening weight height width BT500 Awning 407 mm 9,5 kg 990 mm 900 mm 90 24 www.schlegel.com

Friction Stays: for restricted window openings 25,000 Cycles SS 304 Stainless A range of high-performance cavity fit friction stays designed to prevent the window opening past fully restricted position. Made to all Australian Standards including fall prevention. Suitable for side hung (casement) and top hung (awning) PVC, timber or aluminium windows Easy to install - non handed Innovative design to ensure window will hold in open position when required Ideal for controlling open sashes in exposed or high wind areas Ideal for applications where building codes demand restriction for safety reasons Restricts sash opening in order to avoid interference with ground level traffic flow Can be screwed or riveted to the frame and sash Manufactured from a combination of high quality 304 grade stainless steel and nylon components offering improved durability Cycle tested to 25,000 cycles and above Designed for standard window cavities from 12-18 mm Code BPRESTLD Code BPRESTHD Code BPRESTKRLD Code BPRESTKRHD www.schlegel.com 25

Friction Stays: project gallery 26 www.schlegel.com

www.schlegel.com 27

For further information please contact your local Schlegel representative SCHLEGEL PTY. LIMITED ABN 27 000 419 876 Head Office: 44 Riverside Road Chipping Norton NSW 2170 Ph: +61 2 8707 2000 Fax: +61 2 8707 2070 Email: sydney.schlegel@schlegel.com Victoria: Factory 16 / 2-4 Damian Court Dandenong Vic 3175 Ph: +61 3 9793 40 Fax: +61 3 9793 4566 Queensland: 2 / 17 Lawrence Drive Nerang Qld 4211 Ph: +61 7 5527 3999 Fax: +61 7 5527 3393 Western Australia: 3 / 45 Truganina Road Malaga WA 6090 Ph: +61 8 9248 4500 Fax: +61 8 9248 4855 New Zealand: Burrett Business Park, d Burrett Ave, Penrose, Auckland NZ Ph: + 64 9 478 4001 Fax: +64 9 478 4002 Email: salesnz@schlegel.com Care has been taken to ensure that the contents of this publication are accurate, but Schlegel and its subsidiary companies do not accept responsibility for errors or for information that is found to be misleading. Suggestions for, or description of, the end use or application of products or methods of working are for information only. All dimensions are in mm and are nominal. Schlegel reserve the right to change specification without prior notice. Schlegel s names and logos and all related trademarks (including SCHLEGEL, SCHLEGEL Red Square Logo and Red Square Logo ), trade names, and other intellectual property are the property of Schlegel Acquisition Holdings Limited trading as Schlegel International and cannot be used without its express prior written permission. All rights reserved. Schlegel Acquisition Holdings Limited trading as Schlegel International 2016. www.schlegel.com Mar17 V3 FrSt

2024 © sportdocbox.com Privacy Policy | Terms of Service | Feedback