SULPHUR POWDER. Rubber industries, pesticides, fireworks. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia

Similar documents
Animal feed supplement. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)

Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)

C.I. Solvent Orange 60; Waxoline Orange 3GP FWN. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)

EXPANDABLE GRAPHITE. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)

WAXOLINE VIOLET A-FW (ALL HOURS)

Additive for paint resin. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)

Oil well drilling fluid additive. Defoamer. Level 8, 1 Nicholson Street, Melbourne 3000 Australia (ALL HOURS)

Chemical process industry. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)

COPPER DISODIUM EDTA CHELATE. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)

Lubricant, personal hygiene, stabiliser Browns Road Noble Park, Victoria 3174

GRAPHITE (ALL GRADES)

N-ACETYL-L-CYSTEINE. Pharmaceutical; food; chemical ingredient.

Level 8, 1 Nicholson Street Melbourne 3000 Australia (ALL HOURS)

Ixom Operations Pty Ltd (Bronson & Jacobs division) - incorporated in Australia ABN: Street Address: (ALL HOURS)

CALCIUM CHLORIDE. Accelerator, adsobant, anti-freeze, mould inhibitor, food additive.

SODIUM DIMETHYL DITHIOCARBAMATE. Fungicide, corrosion inhibitor, rubber accelerator (ALL HOURS)

12-HYDROXYSTEARIC ACID. Lubricant and chemical intermediate (ALL HOURS)

WINNOFIL COATED. Construction materials additives; Lubricant; Thickening agent. Level 8, 1 Nicholson Street Melbourne 3000 Australia

PARAFFIN WAX. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)

Food additive for stock foods (ALL HOURS)

FERRIC SULPHATE SOLID. Coagulant in water treatment applications. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia

In paints, adhesives, plastics, and rubber industries (ALL HOURS)

ALINCO X LINSEED OIL. House paints, enamels, flat wall finishes,varnishes, printing inks.

Wide variety of industrial, chemical and food related applications. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia

MAKON TSP-16. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)

Ixom Operations Pty Ltd (Bronson & Jacobs division) - incorporated in Australia ABN: Street Address: (ALL HOURS)

MONOSODIUM PHOSPHATE ANHYDROUS. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)

NTA TRISODIUM SALT. Nitrilo triacetic acid, trisodium salt. Complexing agent for the chemical industry.

Chondroitin Sulfate Sodium; Chondroitin Sulphate 90% Shark. Nutritional applications.

ACTIVATED BLEACHING EARTH. Food chemical/additive.

Level 8, 1 Nicholson Street Melbourne 3000 Australia (ALL HOURS)

Jeechem Sodium Stearate C7. Ixom Operations Pty Ltd (Bronson & Jacobs division) - incorporated in Australia ABN: Street Address:

PLURONIC F87 PRILL SURFACTANT (ALL HOURS)

FLUON PTFE (ALL GRADES) Polytetrafluoroethylene; poly(tetrafluoroethylene). Production of moulded articles (ALL HOURS)

SPAKFILLA QUICK SET POWDER (INTERIOR) Rigid filler for interior plaster, masonary and timber (ALL HOURS)

ASCORBYL PALMITATE. Ixom Operations Pty Ltd (Bronson & Jacobs division) - incorporated in Australia ABN: Street Address:

Level 8, 1 Nicholson Street, Melbourne 3000 Australia (ALL HOURS)

SOYA LECITHIN. Emulsifier; dispersant; antioxidant; food additive. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia

CMX RENDER. Irritating to respiratory system and skin. Risk of serious damage to eyes.

Pharmaceutical applications. Ixom Operations Pty Ltd (Bronson & Jacobs division) - incorporated in Australia ABN: Street Address:

Carbamide; Carbonyl diamide; n-rich urea. Fertilisers, animal feeds, plastics, diuretics, adhesives.

Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)

CETCO SHORE PAC. Copolymer of sodium acrylate and acrylamide (ALL HOURS)

Ixom Operations Pty Ltd (Bronson & Jacobs division) - incorporated in Australia ABN: Street Address: (ALL HOURS)

LUCITE SANITARY GRADE ACRYLIC - BATH. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)

ALUMINIUM TITANIUM BORON. Ixom Operations Pty Ltd (Incorporated in Australia) 166 Totara Street Mt Maunganui South New Zealand

Pharmaceutical excipient, food additive.

Material Safety Data Sheet

Raw material for the chemical-technical industry. Organic Crop Protectants Pty Ltd Turrella Street TURRELLA NSW 2205 Australia

CITRIC ACID MONOHYDRATE (ALL HOURS)

SODIUM METABISULPHITE (ALL GRADES) Preservative for foods; antioxidant. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia

Polyglycerol polyricinoleate. Ixom Operations Pty Ltd (Bronson & Jacobs division) - incorporated in Australia ABN: Street Address:

EDTA TETRASODIUM SALT. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)

Ixom Operations Pty Ltd (Bronson & Jacobs division) - incorporated in Australia ABN: Street Address: (ALL HOURS)

Aromatic and cosmetic applications.

Ixom Operations Pty Ltd (Bronson & Jacobs division) - incorporated in Australia ABN: Street Address: (ALL HOURS)

CALCIUM GLUCONATE. Ixom Operations Pty Ltd (Bronson & Jacobs division) - incorporated in Australia ABN: Street Address:

Ixom Operations Pty Ltd (Bronson & Jacobs division) - incorporated in Australia ABN: Street Address: (ALL HOURS)

HYALURONIC ACID-BT (ALL HOURS)

(ALL HOURS)

Ixom Operations Pty Ltd (Bronson & Jacobs division) - incorporated in Australia ABN: Street Address: (ALL HOURS)

Ixom Operations Pty Ltd (Bronson & Jacobs division) - incorporated in Australia ABN: Street Address: (ALL HOURS)

(ALL HOURS)

Lipopeg 2-DL; Westwood Emulsifier; STEPAN PEG 400 DL

SODIUM SULPHITE (20% W/V) (ALL HOURS)

Pharmaceutical applications. Ixom Operations Pty Ltd (Bronson & Jacobs division) - incorporated in Australia ABN: Street Address:

Polyethylene glycol 400; PEG400. Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)

Raw material for the chemical-technical industry. Level 8, 1 Nicholson Street Melbourne 3000 Australia (ALL HOURS)

Based on available information, not classified as hazardous according to criteria of Safe Work Australia; NON-HAZARDOUS SUBSTANCE.

CETCO SHOREPAC RICCARTON STOP (ALL HOURS)

YATES TOMATO & VEGETABLE DUST

Zinc powder; Zinc metal powder; Zn (ALL HOURS)

Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)

Plasticiser for use in PVC and PVC copolymers. Level 8, 1 Nicholson Street Melbourne 3000 Australia (ALL HOURS)

Material Safety Data Sheet

POLYPROPYLENE (ALL HOURS)

0.1M SODIUM HYDROXIDE (ALL HOURS)

Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia (ALL HOURS)

Material Safety Data Sheet

Surface coating. Applied by brush, roller or spray (ALL HOURS)

Ixom Operations Pty Ltd (Bronson & Jacobs division) - incorporated in Australia ABN: Street Address: (ALL HOURS)

0.1M HYDROCHLORIC ACID (ALL HOURS)

CABOTS DECK CLEAN (ALL HOURS)

PROACTIVE GLASS CLEANER

Material Safety Data Sheet

YATES HYDRANGEA BLUEING TONIC. Combined fertiliser and blueing agent for hydrangeas.

Material Safety Data Sheet

PARFIX PVA ADHESIVE (ALL HOURS)

GROUT STAIN WHITENER. For advice, contact a Poisons Information Centre (e.g. phone Australia ; New Zealand ) or a doctor.

PARFIX COLOUR FLEX. Based on available information, not classified as hazardous according to criteria of Safe Work Australia; NON-HAZARDOUS SUBSTANCE.

POLYISOBUTENE. Polymer (oligomer), plasticiser, binder, chemical reagent (ALL HOURS)

Ixom Operations Pty Ltd (Bronson & Jacobs division) - incorporated in Australia ABN: Street Address: (ALL HOURS)

SOLIPAC (POLYALUMINIUM CHLORIDE) Ixom Operations Pty Ltd (Incorporated in Australia) 166 Totara Street Mt Maunganui South New Zealand

Based on available information, not classified as hazardous according to criteria of Safe Work Australia; NON-HAZARDOUS SUBSTANCE.

POLYFILLA PUTTY. Based on available information, not classified as hazardous according to criteria of Safe Work Australia; NON-HAZARDOUS SUBSTANCE.

Injection moulding and extrusion. Orica New Zealand Limited Orica Chemnet House Level four, 123 Carlton Gore Road Newmarket, Auckland New Zealand

Pharmaceutical applications. Ixom Operations Pty Ltd (Bronson & Jacobs division) - incorporated in Australia ABN: Street Address:

Ixom Operations Pty Ltd (Bronson & Jacobs division) - incorporated in Australia ABN: Street Address: (ALL HOURS)

FERROUS SULPHATE. Ferrous Sulfate; Iron (II) Sulfate. Pharmaceutical / Nutraceutical applications.

Material Safety Data Sheet

Transcription:

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name: Other name(s): SULPHUR POWDER Sulfur powder; Atomic sulphur; Dusting sulphur; Sulphur MC2; Sulphur MC2 Oiled. Recommended Use of the Chemical and Restrictions on Use Rubber industries, pesticides, fireworks. Supplier: Ixom Operations Pty Ltd ABN: 51 600 546 512 Street Address: Level 8, 1 Nicholson Street East Melbourne Victoria 3002 Australia Telephone Number: +61 3 9906 3000 Emergency Telephone: 1 800 033 111 (ALL HOURS) Please ensure you refer to the limitations of this Safety Data Sheet as set out in the "Other Information" section at the end of this Data Sheet. 2. HAZARDS IDENTIFICATION Classified as Dangerous Goods by the criteria of the Australian Dangerous Goods Code (ADG Code) for Transport by Road and Rail; DANGEROUS GOODS. This material is hazardous according to Safe Work Australia; HAZARDOUS CHEMICAL. Classification of the chemical: Flammable solids - Category 2 Skin Irritation - Category 2 SIGNAL WORD: WARNING Hazard Statement(s): H228 Flammable solid. H315 Causes skin irritation. Precautionary Statement(s): Prevention: P210 Keep away from heat, sparks, open flames, hot surfaces. No smoking. P240 Ground or bond container and receiving equipment. P241 Use explosion-proof electrical, ventilating, lighting equipment. P264 Wash hands thoroughly after handling. P280 Wear protective gloves / protective clothing / eye protection / face protection. Response: P302+P352 IF ON SKIN: Wash with plenty of soap and water. P321 Specific treatment (see First Aid Measures on Safety Data Sheet). P332+P313 If skin irritation occurs: Get medical advice/attention. P362 Take off contaminated clothing and wash before reuse. P370+P378 In case of fire: Use extinguishing media as outlined in Section 5 of this Safety Data Sheet to extinguish. Page 1 of 7

Storage: No storage statements. Disposal: No disposal statements. Poisons Schedule (SUSMP): None allocated. 3. COMPOSITION AND INFORMATION ON INGREDIENTS Components CAS Number Proportion Hazard Codes Sulfur 7704-34-9 >95% H315 Other ingredient(s) - 0-<5% - Magnesium carbonate 546-93-0 0-<5% - 4. FIRST AID MEASURES For advice, contact a Poisons Information Centre (e.g. phone Australia 131 126; New Zealand 0800 764 766) or a doctor. Inhalation: Remove victim from area of exposure - avoid becoming a casualty. Remove contaminated clothing and loosen remaining clothing. Allow patient to assume most comfortable position and keep warm. Keep at rest until fully recovered. Seek medical advice if effects persist. Skin Contact: If skin or hair contact occurs, remove contaminated clothing and wash skin and hair with soap and water. Seek immediate medical assistance. Eye Contact: If in eyes, hold eyelids apart and flush the eye continuously with running water. Continue flushing until advised to stop by a Poisons Information Centre or a doctor, or for at least 15 minutes. Ingestion: Rinse mouth with water. If swallowed, give a glass of water to drink. If vomiting occurs give further water. Never give anything by the mouth to an unconscious patient. Seek medical advice. Indication of immediate medical attention and special treatment needed: Treat symptomatically. 5. FIRE FIGHTING MEASURES Suitable Extinguishing Media: Fine water spray, normal foam, dry agent (carbon dioxide, dry chemical powder). Unsuitable Extinguishing Media: Solid water jet/stream may scatter and spread the fire. Hazchem or Emergency Action Code: 1Z Specific hazards arising from the chemical: Flammable solid. Avoid all ignition sources. Product Name: SULPHUR POWDER Page 2 of 7 Issued: 21/03/2014

Special protective equipment and precautions for fire-fighters: On burning will emit toxic fumes, including those of oxides of sulfur. Can melt and flow in a fire situation. If safe to do so, remove containers from path of fire. Keep containers cool with water spray. Fire fighters to wear self-contained breathing apparatus and suitable protective clothing if risk of exposure to vapour or products of combustion. 6. ACCIDENTAL RELEASE MEASURES Emergency procedures/environmental precautions: Shut off all possible sources of ignition. If contamination of sewers or waterways has occurred advise local emergency services. Personal precautions/protective equipment/methods and materials for containment and cleaning up: Wear protective equipment to prevent skin and eye contact and breathing in dust. Work up wind or increase ventilation. Cover with damp absorbent (inert material, sand or soil). Sweep or vacuum up, but avoid generating dust. Collect and seal in properly labelled containers or drums for disposal. Use a spark-free shovel. 7. HANDLING AND STORAGE Precautions for safe handling: Avoid skin and eye contact and breathing in dust. In common with many organic chemicals, may form flammable dust clouds in air. For precautions necessary refer to Safety Data Sheet "Dust Explosion Hazards". Take precautionary measures against static discharges. Conditions for safe storage, including any incompatibilities: Store in a cool, dry, well ventilated place. Store away from sources of heat or ignition. Store away from incompatible materials described in Section 10. Keep containers closed when not in use - check regularly for spills. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Control Parameters: No value assigned for this specific material by Safe Work Australia. However, Workplace Exposure Standard(s) for constituent(s): Magnesite (Magnesium carbonate): 8hr TWA = 10 mg/m³ As published by Safe Work Australia Workplace Exposure Standards for Airborne Contaminants. TWA - The time-weighted average airborne concentration of a particular substance when calculated over an eight-hour working day, for a five-day working week. These Workplace Exposure Standards are guides to be used in the control of occupational health hazards. All atmospheric contamination should be kept to as low a level as is workable. These workplace exposure standards should not be used as fine dividing lines between safe and dangerous concentrations of chemicals. They are not a measure of relative toxicity. Appropriate engineering controls: Ensure ventilation is adequate and that air concentrations of components are controlled below quoted Workplace Exposure Standards. Keep containers closed when not in use. If in the handling and application of this material, safe exposure levels could be exceeded, the use of engineering controls such as local exhaust ventilation must be considered and the results documented. If achieving safe exposure levels does not require engineering controls, then a detailed and documented risk assessment using the relevant Personal Protective Equipment (PPE) (refer to PPE section below) as a basis must be carried out to determine the minimum PPE requirements. Page 3 of 7

Individual protection measures, such as Personal Protective Equipment (PPE): The selection of PPE is dependent on a detailed risk assessment. The risk assessment should consider the work situation, the physical form of the chemical, the handling methods, and environmental factors. OVERALLS, SAFETY SHOES, CHEMICAL GOGGLES, GLOVES, DUST MASK. Wear overalls, chemical goggles and impervious gloves. Avoid generating and inhaling dusts. If determined by a risk assessment an inhalation risk exists, wear a dust mask/respirator meeting the requirements of AS/NZS 1715 and AS/NZS 1716. Always wash hands before smoking, eating, drinking or using the toilet. Wash contaminated clothing and other protective equipment before storage or re-use. 9. PHYSICAL AND CHEMICAL PROPERTIES Physical state: Powder Colour: Lemon Yellow Odour: Odourless Solubility: Negligible solubility in water. Specific Gravity: 2.07 @25 C Relative Vapour Density (air=1): Not available Vapour Pressure (20 C): 0.00021 Pa @25 C Flash Point ( C): 218 @761 mmhg Flammability Limits (%): Not available Autoignition Temperature ( C): Not available Melting Point/Range ( C): 113 Boiling Point/Range ( C): 445 Decomposition Point ( C): Not available ph: Not applicable 10. STABILITY AND REACTIVITY Reactivity: Chemical stability: Possibility of hazardous reactions: Conditions to avoid: Incompatible materials: Corrosive to steel. Reacts violently with oxidising agents. Stable under normal ambient and anticipated storage and handling conditions of temperature and pressure. Dust explosion hazard. Corrosive to damp steel. Avoid dust generation. Avoid exposure to heat, sources of ignition, and open flame. Incompatible with oxidising agents, reducing agents, bases, halides, flammable materials, metal oxides, metal salts, strong acids. Hazardous decomposition products: Product Name: SULPHUR POWDER Sulfur dioxide. Page 4 of 7 Issued: 21/03/2014

11. TOXICOLOGICAL INFORMATION No adverse health effects expected if the product is handled in accordance with this Safety Data Sheet and the product label. Symptoms or effects that may arise if the product is mishandled and overexposure occurs are: Ingestion: Eye contact: Skin contact: Inhalation: Swallowing can result in nausea, vomiting, diarrhoea, and gastrointestinal irritation. May be an eye irritant. Contact with skin will result in irritation. Breathing in dust may result in respiratory irritation. Acute toxicity: Oral LD50 (rat): >2000 mg/kg Dermal LD50 (rat): >2000 mg/kg Respiratory or skin sensitisation: Not a skin sensitiser. Chronic effects: Mutagenicity: Carcinogenicity: Reproductive toxicity: Specific Target Organ Toxicity (STOT) - single exposure: Specific Target Organ Toxicity (STOT) - repeated exposure: Aspiration hazard: 12. ECOLOGICAL INFORMATION Ecotoxicity Avoid contaminating waterways. 13. DISPOSAL CONSIDERATIONS Disposal methods: Refer to Waste Management Authority. Dispose of contents and container in accordance with local, regional, national, international regulations. 14. TRANSPORT INFORMATION Road and Rail Transport Classified as Dangerous Goods by the criteria of the Australian Dangerous Goods Code (ADG Code) for Transport by Road and Rail; DANGEROUS GOODS. UN No: 1350 Page 5 of 7

Transport Hazard Class: Packing Group: Proper Shipping Name or Technical Name: Hazchem or Emergency Action Code: 4.1 Flammable Solid III SULPHUR 1Z Marine Transport Classified as Dangerous Goods by the criteria of the International Maritime Dangerous Goods Code (IMDG Code) for transport by sea; DANGEROUS GOODS. UN No: 1350 Transport Hazard Class: 4.1 Flammable Solid Packing Group: III Proper Shipping Name or SULPHUR Technical Name: IMDG EMS Fire: IMDG EMS Spill: F-A S-G Air Transport Classified as Dangerous Goods by the criteria of the International Air Transport Association (IATA) Dangerous Goods Regulations for transport by air; DANGEROUS GOODS. UN No: 1350 Transport Hazard Class: 4.1 Flammable Solid Packing Group: III Proper Shipping Name or SULPHUR Technical Name: 15. REGULATORY INFORMATION Classification: This material is hazardous according to Safe Work Australia; HAZARDOUS CHEMICAL. Classification of the chemical: Flammable solids - Category 2 Skin Irritation - Category 2 Hazard Statement(s): H228 Flammable solid. H315 Causes skin irritation. Poisons Schedule (SUSMP): None allocated. All the constituents of this material are listed on the Australian Inventory of Chemical Substances (AICS). 16. OTHER INFORMATION Supplier Safety Data Sheet; 10/ 2013. Page 6 of 7

Reason(s) for Issue: Revised Primary SDS Change in Formulation Change in Exposure Controls Change in Engineering Control Measures This SDS summarises to our best knowledge at the date of issue, the chemical health and safety hazards of the material and general guidance on how to safely handle the material in the workplace. Since Ixom Operations Pty Ltd cannot anticipate or control the conditions under which the product may be used, each user must, prior to usage, assess and control the risks arising from its use of the material. If clarification or further information is needed, the user should contact their Ixom representative or Ixom Operations Pty Ltd at the contact details on page 1. Ixom Operations Pty Ltd's responsibility for the material as sold is subject to the terms and conditions of sale, a copy of which is available upon request. Page 7 of 7