TAMMSCURE WB 30C Version 3.0 Print Date 07/08/2012 REVISION DATE: 07/07/2012

Similar documents
KUREZ DR VOX Version 3. Print Date 05/20/2009 REVISION DATE: 05/19/2009

LUSTER SEAL WB 150 Version 3.0 Print Date 07/08/2012 REVISION DATE: 07/07/2012

Material Safety Data Sheet

CLEARSEAL WB 150 Version 2.0 Print Date 07/09/2012 REVISION DATE: 07/08/2012

: KUREZ W VOX - 55 GAL DRUM

EUCON CIA - BULK GALLONS Version 2. Print Date 09/13/2008 REVISION DATE: 09/12/2008

UT91 Version 2. Print Date 05/13/2010 REVISION DATE: 04/14/2010

PLASTOL SPC - BULK GALLONS Version 3.1 Print Date 01/20/2015 REVISION DATE: 06/20/2013

: ACCELGUARD GAL DRUM

: EUCON DUSTROL - BULK GALLONS

ALPHAGUARD M-PRIME - 1 GALLON Version 1. Print Date 04/18/2012 REVISION DATE: 10/05/2011

: SUPER AQUA-CURE VOX

Version 4.0 Print Date 10/28/2014 REVISION DATE: 10/27/2014

Version 5.0 Print Date 02/12/2013 REVISION DATE: 02/11/2013

: EUCON WR 91 - BULK GALLONS

Version 3.0 Print Date 07/08/2012 REVISION DATE: 07/07/2012 SECTION 1 - PRODUCT IDENTIFICATION / PREPARATION INFORMATION

SUPER DIAMOND CLEAR VOX LOW VOC Version 2.0 Print Date 04/24/2013 REVISION DATE: 02/08/2013

HEY'DI SEALING LIQUID 1GL/6PK Version 1. Print Date 07/13/2007 REVISION DATE: 12/12/2006

SG ACRYTHANE BIRCH WHITE -B 5 GAL PAIL Version 2. Print Date 07/07/2009 REVISION DATE: 06/29/2009

LUSTER SEAL WB 300 Version 1.1 Print Date 09/11/2007 REVISION DATE: 09/10/2007

: REPUBLIC METAL PRIMER 5 GAL

Version 3.0 Print Date 12/23/2013 REVISION DATE: 07/08/2012

: EUCO DIAMOND HARD - 55 GAL DRUM

EUCO QWIKJOINT UVR PART B - 5 GAL PAIL Version 3.0 Print Date 11/05/2012 REVISION DATE: 08/01/2012

: UNIVERSAL COLOR PACK SHADOW GRAY-cs

TAMMSCOAT FN 3100P Version 1. Print Date 05/30/2008 REVISION DATE: 09/21/2007

240 COLOR PAK - ALUMINUM STONE 6 POUCHES Version 2.0 Print Date 10/24/2012 REVISION DATE: 07/08/2012

: DIAMOND - PLATE LIGHT REFLECTIVE

DURAL 435 PART A Version 3.0 Print Date 01/27/2015 REVISION DATE: 07/08/2012

: VULKEM 202 Part B. Material Safety Data Sheet SECTION 1 - PRODUCT IDENTIFICATION SECTION 2 - HAZARDS IDENTIFICATION SECTION 3 - PRODUCT COMPOSITION

ICE COATING 5 GL Version 1. Print Date 08/27/2009 REVISION DATE: 08/12/2008

MORTAR COLOR#719 LIGHT CHOCOLATE -12/2.5 Version 1 Print Date 07/03/2007 REVISION DATE: 06/16/2005

: LINSEED OIL TREATMENT

VERTICOAT Version 4.0 Print Date 05/30/2013 REVISION DATE: 05/29/2013

: TAMMS EXPRESS REPAIR 50# BG

: SPEED CRETE RED LINE 50# BAG

TAMMSFLEX NS PART A Version 1. Print Date 06/10/2008 REVISION DATE: 02/07/2008

Version 2.0 Print Date 07/09/2012 REVISION DATE: 07/08/2012

SURFLEX TR Version 2.0 Print Date 03/07/2013 REVISION DATE: 07/08/2012

: INTEGRAL WATERPELLER POWDER

: SPEED PLUG- 50# Bag (USE PAIL)

CORR-BOND - 3-1/2 GALLON UNIT** Version 1 Print Date 07/12/2007 REVISION DATE: 05/24/2005

: TREMPRO 644 RED HIGH TEMP

PARASEAL 60MIL GM/LG BLACK 8' W x 180' Version 3.0 Print Date 03/05/2013 REVISION DATE: 07/08/2012

Tstrata ISR Version 6.0 REVISION DATE: 11/21/2014

: SOLARGARD ACRYLIC SEALER 5 GAL

SPEED CRETE GREEN LINE Version 2. Print Date 09/23/2008 REVISION DATE: 09/22/2008

: TREMPRIME LV 5 GALLON PAIL

: TREMFLEX 834 SMOKE&SOUND WHITE-12 QT CTG

: THIN-CRETE GROUT - 50# PL MSTY MAUVE

Version 3.0 Print Date 07/09/2012 REVISION DATE: 07/08/2012

DYMONIC FC BRONZE Version 1.4 Print Date 05/08/2008 REVISION DATE: 05/07/2008

: BARACADE SILANE GAL DRUM

: LINSEED OIL TREATMENT -55 GAL DRUM MTO

: EUCOSLIP VOX - 55 GAL DRUM

Version 3.0 Print Date 07/09/2012 REVISION DATE: 07/08/2012. After Hours: Chemtrec

POWERPLY STANDARD COLD ADHESIVE-52 LINED Version 1.1 Print Date 05/10/2011 REVISION DATE: 08/14/2007

POWERPLY RUB COLD ADH-5 GAL (NWR&SWR)

TREMGLAZE S500 BLACK-30 CTG CS Version 2. Print Date 10/16/2008 REVISION DATE: 10/15/2008

: DYMONIC FC ANODIZED ALUMINUM

DURALKOTE 240 1:1 LT GRAY

: ALUMANATION GL PL

: TREMPRO/VULKEM 636 ALUMINUM 30 CTG/CS

FLEXOLITH 1:1 Version 3.0 Print Date 12/05/2013 REVISION DATE: 07/08/2012

ALPHAGUARD BIO TOP COAT PART B - 1 GAL

DURALCRETE-LV B Version 1. Print Date 07/13/2007 REVISION DATE: 06/08/2007

: TREMGLAZE POLYURETHANE CLEANER (12 OZ/CAN)12 AERO CANS/CS

DURAL 50 LM 2:1 PART B Version 1.1 Print Date 05/28/2008 REVISION DATE: 03/20/2008

DURALBOND Version 3.0 Print Date 12/05/2013 REVISION DATE: 07/08/2012

DURATREM EP PART A CURING AGENT Version 1.1 Print Date 10/11/2006 REVISION DATE: 09/01/2006

EUCO # 452 EPOXY SYSTEM LV Version 1 Print Date 10/22/2008 REVISION DATE: 06/13/2005

TREMPRO/VULKEM 626 GRAY 5 GAL S/S PAIL Version 1.2 Print Date 09/04/2007 REVISION DATE: 09/01/2006

Chemical Name: Vulkem 116 Polyurethane Sealant. Manufacturer: Tremco. Container size: 10.1oz. Location: VLA. Disposal: Place empty container in trash.

: VULKEM 640 ALUMINUM 5 US GAL/18.9 L

RAMUC THINNER 1 GAL Version 1 Print Date 10/24/2005 REVISION DATE: 06/30/2005

: DYMONIC ALUMINUM STONE

ARMOR COAT RP FIRE RED

Version 3.0 Print Date 03/28/2013 REVISION DATE: 07/08/2012

DYMERIC 240. Material Safety Data Sheet. Version 3.0 Print Date 04/26/2014 REVISION DATE: 04/25/2014

EUCO # 452 EPOXY SYSTEM LV Version 4.0 Print Date 04/29/2015 REVISION DATE: 06/12/2013

EUCO # 452 EPOXY SYSTEM MV Version 7.0 Print Date 04/29/2015 REVISION DATE: 02/13/2013

DURALPREP AC Version 3.0 Print Date 12/23/2013 REVISION DATE: 07/08/2012

MATERIAL SAFETY DATA SHEET

=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION

VULKEM 951 NF SLATE GRAY KIT Version 1.1 Print Date 09/11/2006 REVISION DATE: 09/01/2006

CRYSTAL CLEAR VOC - 5 GL Version 1. Print Date 04/21/2011 REVISION DATE: 03/30/2009

EUCO QWIKJOINT 200 CARTRIDGES Version 2.0 Print Date 12/27/2013 REVISION DATE: 07/08/2012

=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

Dymeric 240 FC Version 3. Print Date 12/22/2011 REVISION DATE: 12/20/2011

=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET WL

: EXOAIR FLEX LEF FOAM SEALANT

MATERIAL SAFETY DATA SHEET

Health Flammability 2 Reactivity 0 PRODUCT NAME FORMBY S* Build-Up Remover

MATERIAL SAFETY DATA SHEET

=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME & NUMBER WHITE LIGHTNING Silicone Rubber All Purpose Sealant (RTV Formula) WL09010 WL09023 Clear WL09210 WL09213 White

GEOFLEX WELDING SOLVENT 5 GL Version 2. Print Date 07/07/2009 REVISION DATE: 06/29/2009

Version /28/2006

Transcription:

SECTION 1 - PRODUCT IDENTIFICATION / PREPARATION INFORMATION Product Information Trade name : Product code : THH3WBD55 Supplier : Euclid Canada 2835 Grande-Allée St-Hubert, QC J4T 2R4 Telephone : 1-800-667-0920 Emergency Phone: : (613) 996-6666 Product use : Coating Preparation Information Prepared by: : Sewnauth Raghunandan Date: : 07/07/2012 Telephone : (416) 421-3300 SECTION 2 - HAZARDS IDENTIFICATION Emergency Overview Clear to White. Liquid. No serious effects anticipated under normal conditions of use. Leave area to breathe fresh air. Avoid further overexposure. If symptoms persist, get medical attention. Acute Potential Health Effects/ Routes of Entry Inhalation : No serious effects anticipated under normal conditions of use. Eyes : Direct contact may cause mild irritation. Ingestion : May cause gastrointestinal irritation, nausea, and vomiting. Skin : May cause mild irritation. Aggravated Medical Conditions Pre-existing eye, skin and respiratory disorders may be aggravated by exposure. Chronic Health Effects Fillers are encapsulated and not expected to be released from product under normal conditions of use. Prolonged or repeated exposure to mineral spirits (petroleum naphtha or stoddard solvent) may cause defatting, drying, and irritation of the skin, dermatitis, central nervous system (CNS) effects, and adverse liver, kidney, and lung effects. SECTION 3 : HAZARDOUS INGREDIENTS Chemical Name CAS-No. Weight % Range Aliphatic naphtha 64742-88-7 5.0-10.0 The ingredients listed above are hazardous as defined in the controlled products regulation. (CPR). 1/5 THH3WBD55

SECTION 4 - FIRST AID MEASURES Get immediate medical attention for any significant overexposure. Inhalation : Leave area to breathe fresh air. Avoid further overexposure. If symptoms persist, get medical attention. Eye contact : Flush with water for 15 minutes. If irritation persists, get medical attention. Skin contact : Wash area of contact thoroughly with hand cleaner followed by soap and water. If irritation, rash or other disorders develop, get medical attention immediately. Ingestion : Get medical attention. Do not induce vomiting. Notes to physician : Not applicable. SECTION 5: FIRE / EXPLOSION HAZARDS Flash point : Not available. Method : Not applicable. Lower explosion limit : Not available. Upper explosion limit : Not available. Autoignition temperature : Not available. Extinguishing media : This product is not expected to burn under normal conditions of use. Hazardous combustion products Protective equipment for firefighters : Carbon monoxide and carbon dioxide can form.smoke, fumes. : Use accepted fire fighting techniques. Wear full firefighting protective clothing, including self-contained breathing apparatus (SCBA). Fire and explosion conditions : This product not expected to ignite under normal conditions of use. SECTION 6 - SPILLS / LEAKS / ACCIDENTAL RELEASE MEASURES Transfer to appropriate container for disposal. Stop flow. Contain spill. Keep out of water courses. Absorb spill in sand, earth or other suitable material. Transfer to appropriate container for disposal. Use appropriate protective equipment. Avoid contact with material. SECTION 7 - HANDLING AND STORAGE Handle in compliance with common hygienic practices. Clean hands thoroughly after handling. Keep from freezing. Do not use in confined or poorly ventilated areas. Prevent inhalation of vapor, ingestion, and contact with skin eyes and clothing. Keep container closed when not in use. Precautions also apply to emptied containers. Store in sealed containers in a dry, ventilated warehouse location above freezing. SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION Personal protection equipment 2/5 THH3WBD55

Respiratory protection : Not required under normal conditions of use.wear appropriate, NIOSH/MSHA approved respirator with combination particulate filter and vapor/gas removing cartridge when the ventilation is not adequate or if it is necessary to abrade or grind surfaces coated with this product. Hand protection : Use suitable impervious rubber or vinyl gloves and protective apparel to reduce exposure. Eye protection : Wear appropriate eye protection.wear chemical safety goggles and/or face shield to prevent eye contact. Do not wear contact lenses. Do not touch eyes with contaminated body parts or materials. Have eye washing facilities readily available. Skin and body protection : Prevent contact with shoes and clothing. Use rubber apron and overshoes. Protective measures : Other equipment not normally required.use professional judgment in the selection, care, and use. Engineering measures : Not required under normal conditions of use.use local exhaust when the general ventilation is inadequate. Exposure Limits No known components with exposure limits. SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES Physical State : Liquid Form : Liquid Color : Clear to White Odor : Slight Aromatic ph : 9-11 Vapour pressure : 17 mmhg Vapor density : Heavier than air Melting point/range : Not available. Freezing point : 32 F, 0 C Boiling point/range : 212 F, 100 C Water solubility : Soluble Evaporation Rate: : Not available. Specific Gravity : 0.977 % Volatile Weight : 86 % SECTION 10 - REACTIVITY / STABILITY Substances to avoid Stability Hazardous polymerization : Strong acids.strong bases. : Stable : Will not occur. 3/5 THH3WBD55

SECTION 11 - TOXICOLOGICAL INFORMATION No Data Available SECTION 12 - ECOLOGICAL INFORMATION No Data Available SECTION 13 - WASTE DISPOSAL CONSIDERATIONS Disposal Method : Dispose as hazardous waste according to all local, state, federal and provincial regulations. SECTION 14 - TRANSPORTATION / SHIPPING DATA TDG: CFR / DOT: IMDG: SECTION 15 - REGULATORY INFORMATION North American Inventories: All components are listed or exempt from the TSCA inventory. This product or its components are listed on, or exempt from the Canadian Domestic Substances List. Canadian Regulations: WHMIS Classification : Not Controlled This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all of the information required by the CPR. Other Regulations: Regulatory VOC (less water and exempt solvent) : 255 g/l 4/5 THH3WBD55

SECTION 16 - OTHER INFORMATION HMIS Rating : Health 1 0 = Minimum Flammability 1 1 = Slight Reactivity 0 2 = Moderate PPE 3 = Serious 4 = Severe Further information: For Industrial Use Only. Keep out of Reach of Children. The hazard information herein is offered solely for the consideration of the user, subject to their own investigation of compliance with applicable regulations, including the safe use of the product under every foreseeable condition. Prepared by: Sewnauth Raghunandan Legend ACGIH - American Conference of Governmental Hygienists DOT - Department of Transportation DSL - Domestic Substance List EPA - Environmental Protection Agency HMIS - Hazardous Materials Information System IARC - International Agency for Research on Cancer MSHA - Mine Safety Health Administration NDSL - Non-Domestic Substance List NIOSH - National Institute for Occupational Safety and Health NTP - National Toxicology Program OSHA - Occupational Safety and Health Administration PEL - Permissible Exposure Limit RCRA - Resource Conservation and Recovery Act STEL - Short Term Exposure Limit TLV - Threshold Limit Value TSCA - Toxic Substances Control Act TWA - Time Weighted Average V - Volume VOC - Volatile Organic Compound WHMIS - Workplace Hazardous Materials Information System 5/5 THH3WBD55