Copper Tube - AS1432 VERSATILE, TRUSTED QUALITY

Copper Tube - AS1432 VERSATILE, TRUSTED QUALITY C O P P E R T U B E > P L U M B I N G > G A S F I T T I N G > D R A I N A G E

Propress GAS Water Description Size Product Pack Product Pack Code Qty Code Qty Coupling with Stops (No.1) DN15 50119364 10 50119457 10 DN18 N/A 50133582 10 DN20 50119388 10 50119458 10 DN25 50122662 5 50122415 5 DN32 50122663 1 50122416 1 DN40 50122664 1 50122420 1 DN50 50122665 1 50122422 1 DN65 50133533 1 50122423 1 DN80 50133534 1 50122424 1 Crane Copper Tube ABN 51 008 408 151 A Division of Crane Enfield Metals Pty Limited PO Box 319, Penrith, NSW 2751 Phone: 02 4720 5350 Fax: 02 4720 5390 sales@cranecopper.com.au www.cranecopper.com.au For Viega enquires please call: 1800 043 117 Page 1 of 8 DN100 50133535 1 50122426 1 Reducing Coupling (No.1R) DN18x15 N/A 50162413 10 DN20x18 N/A 50162412 10 DN20x15 50119408 10 50119459 10 DN25x15 50132996 5 50122427 10 DN25x20 50122666 10 50122428 10 DN32x15 50132997 1 50122429 1 DN32x20 50132998 1 50122430 1 DN32x25 50122667 1 50122431 1 DN40x20 50132999 1 50122432 1 DN40x25 50133000 1 50122433 1 DN40x32 50122668 1 50122435 1 DN50x20 50133001 1 50122436 1 DN50x25 50133002 1 50122437 1 DN50x32 50133003 1 50122438 1 DN50x40 50122669 1 50122439 1 DN65x32 50133539 1 50122440 1 DN65x40 50133540 1 50122441 1 DN65x50 50133541 1 50122442 1 DN80x40 50133542 1 50122443 1 DN80x50 50133543 1 50122444 1 DN80x65 50133544 1 50122445 1 DN100x50 50133536 1 50122446 1 DN100x65 50133537 1 50122448 1 DN100x80 50133538 1 50122449 1 Reducer DN20x15 50132991 5 50132889 5 (Reduces a Viega Fitting) DN25x15 50132992 5 50132901 5 DN25x20 50132993 5 50132978 5 DN32x20 50132994 1 50132979 1 DN32x25 50132995 1 50132980 1 DN40x20 50160058 1 50160049 1 DN40x25 50160059 1 50160050 1 DN40x32 50160060 1 50160051 1 DN50x25 50160061 1 50160052 1 DN50x32 50160062 1 50160053 1 DN50x40 50160063 1 50160054 1 DN65x40 50133548 1 50133571 1 DN65x50 50133549 1 50133572 1 DN80x40 50133550 1 50133573 1 DN80x50 50133551 1 50133574 1 DN80x65 50133552 1 50133575 1 DN100x50 50133545 1 50133576 1 DN100x65 50133546 1 50133577 1 DN100x80 50133547 1 50133578 1 wcrn9730.bms1210

Propress GAS Water Description Size Product Pack Product Pack Code Qty Code Qty Repair Coupling (No Stops) DN15 50119416 5 50119460 10 DN20 50119417 5 50119461 10 DN25 50122670 5 50122454 5 DN32 50122671 1 50122460 1 DN40 50122672 1 50122461 1 DN50 50122673 1 50122462 1 DN65 50133553 1 50122463 1 DN80 50133554 1 50122464 1 Crane Copper Tube ABN 51 008 408 151 A Division of Crane Enfield Metals Pty Limited PO Box 319, Penrith, NSW 2751 Phone: 02 4720 5350 Fax: 02 4720 5390 sales@cranecopper.com.au www.cranecopper.com.au For Viega enquires please call: 1800 043 117 DN100 50133555 1 50122465 1 Female line Adaptor (No.2) DN15x½" 50119419 10 50119462 10 DN18x½" N/A 50133581 5 DN20x¾" 50119423 10 50119463 10 DN25x1" 50122674 10 50122466 10 DN32x¼" N/A 50122467 1 DN40x1½" N/A 50122468 1 DN50x2" N/A 50122469 1 Male line Adaptor (No.3) DN15x½" 50119428 10 50119464 10 DN18x½" N/A 50133579 5 DN18x¾" N/A 50133580 5 DN20x¾" 50119434 10 50119465 10 DN25x1" 50122675 10 50122470 10 DN32x1¼" 50122676 1 50122471 1 DN40x1½" 50122677 1 50122472 1 DN50x2" 50122678 1 50122473 1 Elbow 90º (Female-Female No.12) DN15 50119445 10 50119466 10 DN18 N/A 50133583 10 DN20 50119486 10 50119467 10 DN25 50122679 10 50122490 5 DN32 50122680 1 50122491 1 DN40 50122681 1 50122496 1 DN50 50122682 1 50122499 1 DN65 50133524 1 50122500 1 DN80 50133525 1 50122502 1 DN100 50133526 1 50122503 1 Elbow 90º (Male - Female) DN15 50119446 10 50119468 10 DN20 50119447 10 50119469 10 DN25 50122683 10 50122504 10 DN32 50122684 1 50122505 1 DN40 50122685 1 50122506 1 DN50 50122686 1 50122507 1 DN65 50133521 1 50122508 1 DN80 50133522 1 50122509 1 Page 2 of 8 DN100 50133523 1 50122510 1 wcrn9730.bms1210

Crane Copper Tube ABN 51 008 408 151 A Division of Crane Enfield Metals Pty Limited PO Box 319, Penrith, NSW 2751 Phone: 02 4720 5350 Fax: 02 4720 5390 sales@cranecopper.com.au www.cranecopper.com.au For Viega enquires please call: 1800 043 117 Propress GAS Water Description Size Product Pack Product Pack Code Qty Code Qty Tee & Reducing Tee DN15 50119448 10 50119470 10 DN18 N/A 50133584 5 DN20 50119449 10 50119471 10 DN25 50122687 1 50122585 5 DN32 50122688 1 50122586 1 DN40 50122689 1 50122587 1 DN50 50122690 1 50122588 1 DN20x15x15 50119450 10 50119472 10 DN20x20x15 50119451 10 50119473 10 DN20x15x20 N/A 50119475 5 DN25x25x15 50133004 1 50122589 5 DN25x25x20 50122691 1 50122590 5 DN32x32x15 50133005 1 50122591 1 DN32x32x20 50160057 1 50160048 1 DN32x32x25 50122692 1 50122593 1 DN40x40x25 50133006 1 50122594 1 DN40x40x32 50122693 1 50122595 1 DN50x50x20 50133007 1 50122596 1 DN50x50x25 50133008 1 50122597 1 DN50x50x32 50133009 1 50122599 1 DN50x50x40 50122694 1 50122600 1 DN65 50133556 1 50122602 1 DN80 50133558 1 50122603 1 DN100 50133561 1 50122604 1 DN65x65x50 50133557 1 50122608 1 DN80x80x50 50133559 1 50122611 1 DN80x80x65 50133560 1 50122612 1 DN100x100x50 50133562 1 50122613 1 DN100x100x65 50133563 1 50122614 1 DN100x100x80 50133564 1 50122615 1 Tee Adaptor DN25x25x½" N/A 50122573 5 (with Female Thread) DN25x25x¾" N/A 50122574 5 DN32x32x½" N/A 50122575 1 DN32x32x¾" N/A 50122576 1 DN40x40x½" N/A 50122577 1 DN50x50x¾" N/A 50122578 1 DN65x65x¾" 50133566 1 50122579 1 DN65x65x2" 50133565 1 50122580 1 DN80x80x¾" 50133568 1 50122581 1 DN80x80x2" 50133567 1 50122582 1 DN100x100x¾" 50133569 1 50122583 1 DN100x100x2" 50133570 1 50122584 1 Page 3 of 8 wcrn9730.bms1210

Description Elbow 45 (Female - Female) Propress GAS Water Size Product Code Pack Qty Product Code Pack Qty DN25 50122695 5 50122616 5 DN32 50122696 1 50122619 1 DN40 50122697 1 50122620 1 DN50 50122698 1 50122621 1 DN60 50133518 1 50122623 1 Crane Copper Tube ABN 51 008 408 151 A Division of Crane Enfield Metals Pty Limited PO Box 319, Penrith, NSW 2751 Phone: 02 4720 5350 Fax: 02 4720 5390 sales@cranecopper.com.au www.cranecopper.com.au For Viega enquires please call: 1800 043 117 DN80 50133519 1 50122624 1 DN100 50133520 1 50122625 1 Elbow 45 (Male - Female) DN25 50122699 5 50122626 5 DN32 50122700 1 50122628 1 DN40 50122701 1 50122630 1 DN50 50122702 1 50122631 1 DN65 50133515 1 50122632 1 DN80 50133516 1 50122634 1 DN100 50133517 1 50122635 1 Flared Male Adaptor DN15x½" N/A 50119483 5 DN20x¾" N/A 50119484 5 Union (No.62) DN15x½" 50133014 5 50121369 5 DN20x½" 50133015 5 50132986 5 Union (Suit Milne TPF Maincock) DN20x¾" 50133016 5 50121370 5 DN20x1" N/A 50159843 5 Union (No.69) DN25x1" 50133017 5 50132987 5 Male Elbow DN32x1¼" 50133018 1 50132988 1 DN40x1½" 50133019 1 50132989 1 DN50x2" 50133020 1 50132990 1 Page 4 of 8 DN20x20 50160056 1 50160047 1 wcrn9730.bms1210

Description Back-plated Female Elbow (15BP) Propress GAS Water Size Product Code Pack Qty Product Code Pack Qty DN15x½" 50119452 5 50119476 5 DN20x¾" 50119453 5 50119477 5 Back-plated Male Elbow (19BP) Crane Copper Tube ABN 51 008 408 151 A Division of Crane Enfield Metals Pty Limited PO Box 319, Penrith, NSW 2751 Phone: 02 4720 5350 Fax: 02 4720 5390 sales@cranecopper.com.au www.cranecopper.com.au For Viega enquires please call: 1800 043 117 Flange (AS2129 Table E) DN15 (½"x75) 50119454 5 50119478 5 DN25 N/A 50122646 1 DN32 N/A 50122650 1 DN40 N/A 50122651 1 DN50 N/A 50122652 1 DN65 50133527 1 50122653 1 DN80 50133528 1 50122655 1 Cap (DN65, 80,100 with Female Thread) DN100 50133529 1 50122656 1 DN15 50119455 10 50119479 10 DN20 50119456 10 50119482 10 DN25 50133010 5 50122637 5 DN32 50133011 1 50122638 1 DN40 50133012 1 50122639 1 DN50 50133013 1 50122640 1 DN65 50133530 1 50122641 1 DN80 50133531 1 50122642 1 Gas Installation Caution Tag DN100 50133532 1 50122644 1 All 50120942 10 N/A Page 5 of 8 wcrn9730.bms1210

Propress Picco Series Tools Description Size Product Code Pressgun Picco Tool Kit Pressgun Picco Tool with DN15 & DN20 jaws, 2 x 1.1Ah batteries, charger and carry case 50120476 Crane Copper Tube ABN 51 008 408 151 A Division of Crane Enfield Metals Pty Limited Pressing Jaws to suit Picco Series Tools DN25 50125507 PO Box 319, Penrith, NSW 2751 Phone: 02 4720 5350 Fax: 02 4720 5390 sales@cranecopper.com.au www.cranecopper.com.au For Viega enquires please call: 1800 043 117 Propress Pressgun 4B (& PT3) Tools Description Size Product Code Pressgun 4B with 2 x 2.2Ah batteries, charger and carry case 50133586 Pressing Jaws to suit 4B & PT3 DN15 50121367 DN20 50121368 DN25 50125511 DN32 50125512 DN40 50161484 Set of Jaws DN40 and DN50 in carry case to suit 4B & PT3 50125514 Set of Jaws DN65, DN80, DN100 in carry case to suit 4B & PT3 50125515 Page 6 of 8 wcrn9730.bms1210

Specialist Tools Pressgun Picco/4B Description Size Product Code Pressing Jaw to suit Picco Series Tools DN18 (for water fittings only) 50133585 Pressing Jaw to suit 4B/PT3 Tools DN18 (for water fittings only) 50136476 Crane Copper Tube ABN 51 008 408 151 A Division of Crane Enfield Metals Pty Limited PO Box 319, Penrith, NSW 2751 Phone: 02 4720 5350 Fax: 02 4720 5390 sales@cranecopper.com.au www.cranecopper.com.au For Viega enquires please call: 1800 043 117 Replacement Items Ex Australian Stock Description Size Product Code Pressing Jaws to suit Picco Series Tools Pressing Jaws to suit 4B & PT3 DN15 50125505 DN20 50125506 DN25 50125507 DN15 50121367 DN20 50121368 DN25 50125511 DN32 50125512 DN40 50161484 Lithium-ion Battery 18V x 1.1Ah to suit Pressgun Picco/4B 50162414 tools Lithium-ion Battery 18V x 2.2Ah to suit Pressgun Picco/ 4B tools Battery Charger to suit Lithium-ion batteries from Pressgun 4B & Pressgun Picco 50136741 50136740 Page 7 of 8 wcrn9730.bms1210

Replacement Items Ex Germany Description Size Product Code Pressing Jaws to suit 4B & PT3 DN50 50161483 Carry Case to suit DN40 & DN50 jaws 50161482 Crane Copper Tube ABN 51 008 408 151 A Division of Crane Enfield Metals Pty Limited PO Box 319, Penrith, NSW 2751 Phone: 02 4720 5350 Fax: 02 4720 5390 sales@cranecopper.com.au www.cranecopper.com.au For Viega enquires please call: 1800 043 117 XL Jaws DN65 50161481 DN80 50161480 DN100 50161479 Actuator for use with XL jaws Carry Case to suit XL jaws & XL Actuator 50161478 50161461 Page 8 of 8 wcrn9730.bms1210

Press-fit Joining System for Copper Tube PROFESSIONAL FITTING SYSTEM FOR GAS & WATER INSTALLATIONS COPPER TUBING > PROPRESS FITTINGS > TOTAL COPPER SYSTEM

The Crane Copper Tube Viega Propress system is an ultra-fast, press-fit joining system for permanent, professional connection of DN15 to DN100 copper tube. State-of-the-art press-fit technology delivers fast and reliable joints every time. The right connection for your GAS and WATER applications > State-of-the-art Connection Technology: The Viega Propress system integrates state-of-the-art press-fit technology and purpose designed fittings to deliver today s most efficient and reliable copper tube connection method for both gas and water applications. > Fast, No Fuss Connections: No soldering, no welding, no glue, no fuss. The consistent pressing force delivered by the pressing tool ensures a secure, permanent, non-detachable connection every time. > No Flame No Fire: Cold jointing means no danger of fire or heat damage during installation. No moving and set-up of gas bottles and hoses means faster installations and improved on-site safety. > Joints Produced in Just Seconds: Ultra-fast connection in comparison to brazed or soldered connections, and there s far less risk of errors and call back problems, thus greatly improving your economic efficiency. > Amazingly Simple to Use: The system offers all you need, from quality Crane copper tube, through an extensive selection of fittings to efficient pressing tools and appropriate pressing jaws. Propress fittings are fully self contained, with no additional components to fit or adjust. > Save Time and Effort: Fittings generally apply sufficient hold so you can assemble the components first, then work quickly and efficiently from one end to the other with the pressing tool. <

No soldering, no welding, no gluing just fast, no fuss joints for commercial, industrial, multi-residential and domestic gas and water installations. German engineering, German quality fittings, Internationally proven > Tested to Recognised International and Australian Standards: Propress fittings are manufactured using the highest quality materials and state-of-the-art equipment to deliver guaranteed results every time. Propress fittings are tested to strict internationally recognised standards, including DVGW (German Association of Gas and Water Specialists), GASTEC and KIWA standards and comply with Australian standards where applicable. > Unique Smart Connect Visible Test Safety: A unique breakthrough in terms of safety sets Viega s metal pressfitting systems apart from the rest. Smart Connect is a small bypass chamber which at first provides a positive leakage point, but is completely sealed during the pressing process. Any Propress connection which is yet to be pressed is revealed by visible leakage (water systems) and/or a pressure drop (gas and water installations) during line testing. This innovation is referred to as visible test safety and is particularly important where gas is involved. > Strong Permanent Connection: To ensure that Viega press fittings are secure and able to cope with maximum forces, fittings up to DN50 are double pressed in one operation - on either side of the seal, while Propress XL fittings (DN65 to DN100) incorporate a stainless steel grip-ring which ensure a strong burst-proof joint. > Tube Guides for Safer Joints: Viega press fittings incorporate a cylindrical guide tube in front and behind the seal. This prevents the tube tilting and possibly damaging the sealing element during installation and pressing. > Full-Flow Fittings: Propress fittings maintain the full bore of the tube. Fittings provide bend radii that are larger than traditional capillary fittings. Flow calculations can be made as per capillary fittings. > Guaranteed for 25 Years: Only Crane copper tube has been tested and approved for use with the Viega Propress system. When installed to specifications on Crane copper tube, Propress fittings are guaranteed for 25 years against leaks from faulty materials or manufacture. A non-pressed fitting is easy to identify as it will produce an obvious leak. Positively retained sealing element ensures perfect seal. Tube guides prevent tube from tilting during assembly and pressing. Double press-fit joints for greater joint strength (DN15 to DN50).

The professional press-fit connection for Gas Once pressed, PropressG fittings are permanent and guaranteed to be leak free. PropressG fittings are distinguished by YELLOW markings to indicate that they are intended for GAS applications, and are also equipped with a YELLOW sealing element. > Fittings Specifically Designed for Gas Installations: PropressG fittings have been designed for use in gas installations, and are easily recognised by YELLOW markings. PropressG fittings also have a yellow sealing element. > Extensive Range of Low Cost Fittings: PropressG fittings are currently available to cater for most standard connection requirements for DN15 to DN100 (½" to 4") copper tube installations. A full list of available fittings is available at www.cranecopper.com.au. > Approved for use throughout Australia: PropressG fittings are approved for use throughout Australia, and can be used behind or in walls, in direct sunlight and underground. PropressG fittings can be used for natural gas, LPG, compressed air and oil line installations. > Use Crane Industry Standard Tube: PropressG fittings are suitable for use with Crane copper tube Type A and B industry standard gas tube sizes. <

The professional press-fit connection for Water > Fittings Specifically Designed for Water Installations: Propress fittings have been designed for use in a wide range of water applications, and are easily recognised by GREEN markings and a black sealing element manufactured from EPDM. > Australian Tested and Watermark Approved: Propress fittings have been tested to AS3688 and have received Watermark approval NºLN21120 for use with hot and cold potable water applications. > Superior Pressure and Temperature Ranges: Propress fittings are rated for safe working pressure up to 1600kPa at 110ºC for water applications and can handle short term peaks of 200ºC making them ideal for flat panel solar installations. Please consult Crane Copper Tube for applications outside these specifications. Propress fittings are compatible with Crane copper tube Type A, B and C industry standard water tube sizes. > Extensive Range of Low Cost Fittings: Propress fittings are manufactured from the highest quality copper or bronze materials and are currently available to cater for most standard connection requirements for DN15 to DN100 (½" to 4"). A full list of available fittings is available at www.cranecopper.com.au. > Versatility to suit most Construction Applications: Propress fittings can be used behind or in walls, in direct sunlight and underground. Propress fittings can also be used for solar water, drainage and compressed air (max 25mg/m 3 oil concentration). > Cost-effective for All Water Line Systems: Excellent for retrofit and remodelling installations. Can be connected to existing copper lines. Strong and reliable permanent joints in seconds with the easy to operate hand-held pressing tool. Propress fittings are distinguished by GREEN markings to indicate that they are intended for WATER applications, and are also equipped with a BLACK sealing element.

Pressgun Picco for professional pressing of DN15 to DN25 joints Viega Pressgun Picco > 50mm shorter than previous model. > 25% lighter than previous model. > Optimum gun-shaped ergonomic design for one hand pressing operation. > Longer service interval of 32,000 cycles. > Full 180 swivelling head. Means easy access to hard to reach joints. > Powerful 18V Lithium-Ion battery. Smaller, lighter and no memory effect. > Batteries interchangeable with Pressgun 4B. > Professional Joints for DN15 to DN25. The Pressgun Picco tool is a lightweight yet powerful batterypowered electro-hydraulic tool for press-fit joining of both PropressG (gas) and Propress (water) installations using DN15, DN18, DN20 and DN25 copper tube. (Jaws are not interchangeable with the 4B/PT3 models). > Easy to Operate, Safe and Reliable. Automatic forced compression, electronic monitoring of bolt safety and temperature, plus battery charge level and service interval display, all make working with the Viega Pressgun Picco so easy, so quick, and so dependable. > Quality Swiss Design and Manufacture. All Viega pressing tools are designed and manufactured in Switzerland by Von Arx AG, which also manufactures appropriate pressing tools sold under the RIDGID brand name.

Pressgun 4B for professional pressing of DN15 to DN100 joints > Powerful, compulsory pressing and automatic return for worry-free joints every time. > Lighter than previous model. With a reduced weight to 4.35kg (without jaws) and smaller size, the new 4B tool is easier to handle and carry. > Longer service interval of 32,000 cycles. > Full 180 swivelling head. Means easy access to hard to reach joints. > Powerful 18V Lithium-Ion battery. Provides 60% more battery capacity than previous model with no memory effect. > Batteries interchangeable with the Pressgun Picco. > Professional Joints for DN15 to DN100. The Pressgun 4B is a high powered tool for press-fit joining of both PropressG (gas) and Propress (water) installations using all copper tube sizes from DN15 to DN100. (Jaws are not interchangeable with Picco series tools). > Easy to Operate, Safe and Reliable. Automatic forced compression, electronic monitoring of bolt safety and temperature, plus battery charge level and service interval display, all make working with the Viega Pressgun 4B so easy, so quick, and so dependable. Viega Pressgun 4B

> Ultra-fast installation. > Permanent, strong, leak-free joints. > No brazing, soldering or gluing required. > Improves safety and efficiency. > No need to drag gas bottles and hoses around the site. > PropressG has approval for DN15 to DN100 gas installations Australia wide. > Propress has Watermark approval for DN15 to DN100 water installations Australia wide. > Designed for industry standard sized copper tube, can connect to existing copper lines. > Joints can be pressed with pressure in the line. > Proven track record with over 1 billion fittings in use worldwide. > German precision engineered and manufactured fittings. > Guaranteed for 25 years, with a design life of over 50 years. > Superior pressure and temperature ratings. > Can be used behind or in walls, in direct sunlight and underground. > Cylindrical tube guide to protect sealing element during assembly. > Smart Connect leak detection feature to quickly identify unpressed fittings. Obvious pressing marks in DN15 to DN50 fittings also assist in identifying un-pressed fittings. > Fittings supplied in one-piece, ready for installation. > Full-flow joints fittings maintain bore. > Comprehensive range of fittings for both water and gas installations. > One pressing tool can be used for both water and gas. > Ease of use, yet tool is not cost effective for non professionals. Information contained in this brochure is provided as a guide only. Crane Copper Tube does not warrant that the information is accurate or without errors or omissions. Crane Copper Tube reserves the right to correct any errors or misprints. All information and product details contained within this document are provided as a guide only. Product use shall be conducted by a fully licensed plumber/gasfitter. Crane Copper Tube ABN 51 008 408 151 A Division of Crane Enfield Metals Pty Limited PO Box 319, Penrith NSW 2751 Phone: 02 4720 5350 Fax: 02 4720 5390 sales@cranecopper.com.au www.cranecopper.com.au CRN9713.BMS1210

Crane copper tube is manufactured to AS1432 standards using high grade raw materials and modern extruding and drawing technology to provide superior products for water, gas and waste in domestic, commercial and industrial applications. Crane Copper Tube AS1432 > Quality Certified: Crane copper tube is Australian made, and is certified to comply with AS1432 - Copper tube for plumbing, gasfitting and drainage applications. > Internal Surface Quality: Crane Copper Tube uses special manufacturing processes to provide enhanced internal bore characteristics that offer improved corrosion resistance and levels of carbon residue well below the values set by the Standard. > Inherent Strength: Copper tube has inherent strength, providing good resistance to external damage, puncture, abrasion, vibration bumps, and has a wide operating range for pressure and vacuum. > Impervious: Copper tube is impervious to oxygen, insecticide, solvents and toxins. > Non-Flammable: Copper tube is non-flammable and does not emit toxic fumes during fire. > Full Flow Joints: Copper tube jointing does not reduce the bore of the tube. > Low Friction Loss: Copper tube provides high flow rates with minimal external dimensions. > U.V. Resistant: Copper tube does not degrade from direct sunlight or become brittle with age. > Resists Rodent Attack: Copper tube is not prone to damage due to rodent attack. > Multi Applications: Copper tube is made to universal size not a unique brand size. > Stability: Copper tube does not creep with age and has 7 to 15 times less lineal expansion than other materials with heat, and continues to perform at high temperatures. > Healthier & Non-tainting: Copper tube does not adversely affect the taste of water, and *reduces the number of harmful microorganisms in water. *Study conducted by INCRA under project Nº348 1984 using water contaminated with coliforms. > Proven Track Record: Crane copper tube is part of a superior system with a proven track record. > Add Value For Life: Copper tube adds to home s resale value. > Recyclable: Copper tube is a valuable recyclable material. Classification Copper tube is classified into four different specification types based on wall thickness for a specific outside diameter. Products are colour coded as follows: Type A : Green Type B : Blue Type C : Red Type D : Black <

Crane Item Number Nominal Size Outside Diameter Wall Thickness Min. Wall Thickness Type A - Copper Tube Imperial Equivalent O.D. and swg Nominal Weight (kg/m) Form Temper Safe Working Pressure (kpa) @ 50 C Safe Working Pressure (kpa) @>50 & 75 C 50102975 DN 6 6.35 0.91 0.77 1 /4" x 20 0.139 30m coil Annealed 11320 9380 50102976 DN 6 6.35 0.91 0.77 1 /4" x 20 0.139 6m straight Hard drawn 11320 9380 50102985 DN 8 7.94 0.91 0.77 5 /16" x 20 0.180 30m coil Annealed 8810 7300 50102986 DN 8 7.94 0.91 0.77 5 /16" x 20 0.180 6m straight Hard drawn 8810 7300 * DN 10 9.53 1.02 0.88 3 /8" x 19 0.244 18m coil Annealed 8350 6920 * DN 10 9.53 1.02 0.88 3 /8" x 19 0.244 6m straight Hard drawn 8350 6920 50103075 DN 15 12.70 1.02 0.88 1 /2" x 19 0.335 18m coil Annealed 6100 5060 50103076 DN 15 12.70 1.02 0.88 1 /2" x 19 0.335 6m straight Bendable 6100 5060 * DN 18 15.88 1.22 1.04 5 /8" x 18 0.502 18m coil Annealed 5750 4770 50103139 DN 18 15.88 1.22 1.04 5 /8" x 18 0.502 6m straight Hard drawn 5750 4770 50103177 DN 20 19.05 1.42 1.21 3 /4" x 17 0.703 18m coil Annealed 5560 4610 50103179 DN 20 19.05 1.42 1.21 3 /4" x 17 0.703 6m straight Bendable 5560 4610 50103178 DN 20 19.05 1.42 1.21 3 /4" x 17 0.703 6m straight Hard drawn 5560 4610 50103230 DN 25 25.40 1.63 1.39 1" x 16 1.088 18m coil Annealed 4750 3940 50103231 DN 25 25.40 1.63 1.39 1" x 16 1.088 6m straight Hard drawn 4750 3940 * DN 32 31.75 1.63 1.39 1 1 /4" x 16 1.379 18m coil Annealed 3750 3110 50103271 DN 32 31.75 1.63 1.39 1 1 /4" x 16 1.379 6m straight Hard drawn 3750 3110 * DN 40 38.10 1.63 1.39 1 1 /2" x 16 1.670 18m coil Annealed 3100 2570 50103293 DN 40 38.10 1.63 1.39 1 1 /2" x 16 1.670 6m straight Hard drawn 3100 2570 50103321 DN 50 50.80 1.63 1.39 2" x 16 2.251 6m straight Hard drawn 2310 1910 50103348 DN 65 63.50 1.63 1.39 2 1 /2" x 16 2.832 6m straight Hard drawn 1840 1520 50103360 DN 80 76.20 2.03 1.73 3" x 14 4.229 6m straight Hard drawn 1900 1580 * DN 90 88.90 2.03 1.73 3 1 /2" x 14 4.953 6m straight Hard drawn 1630 1350 50103372 DN 100 101.60 2.03 1.83 4" x 14 5.677 6m straight Hard drawn 1500 1250 50103380 DN 125 127.00 2.03 1.83 5" x 14 7.125 6m straight Hard drawn 1200 990 50103385 DN 150 152.40 2.64 2.38 6" x 12 11.104 6m straight Hard drawn 1300 1080 50103394 DN 200 203.20 2.64 2.24 8" x 12 14.871 6m straight Hard drawn 910 760 * Denotes tube made to order where minimum order quantities required. Annealed Bendable > >

Water > Gas > Waste Crane Item Number Nominal Size Outside Diameter Wall Thickness Min. Wall Thickness Type B - Copper Tube Imperial Equivalent O.D. and swg Nominal Weight (kg/m) Form Temper Safe Working Pressure (kpa) @ 50 C Safe Working Pressure (kpa) @>50 & 75 C * DN 6 6.35 0.71 0.60 1 /4" x 22 0.112 30m coil Annealed 8560 7100 * DN 6 6.35 0.71 0.60 1 /4" x 22 0.112 6m straight Hard drawn 8560 7100 * DN 8 7.94 0.71 0.60 5 /16" x 22 0.144 30m coil Annealed 6700 5560 50102981 DN 8 7.94 0.71 0.60 5 /16" x 22 0.144 6m straight Hard drawn 6700 5560 50103008 DN 10 9.53 0.91 0.77 3 /8" x 20 0.220 18m coil Annealed 7220 5980 50103014 DN 10 9.53 0.91 0.77 3 /8" x 20 0.220 6m straight Hard drawn 7220 5980 50103045 DN 15 12.70 0.91 0.77 1 /2" x 20 0.301 18m coil Annealed 5290 4390 50103047 DN 15 12.70 0.91 0.77 1 /2" x 20 0.301 6m coil Annealed 5290 4390 50103061 DN 15 12.70 0.91 0.77 1 /2" x 20 0.301 6m straight Bendable 5290 4390 50103133 DN 18 15.88 1.02 0.88 5 /8" x 19 0.426 18m coil Annealed 4810 3990 50103135 DN 18 15.88 1.02 0.88 5 /8" x 19 0.426 6m straight Bendable 4810 3990 50103164 DN 20 19.05 1.02 0.88 3 /4" x 19 0.517 18m coil Annealed 3970 3290 50103165 DN 20 19.05 1.02 0.88 3 /4" x 19 0.517 6m straight Bendable 3970 3290 50103222 DN 25 25.40 1.22 1.04 1" x 18 0.829 18m coil Annealed 3500 2900 50103225 DN 25 25.40 1.22 1.04 1" x 18 0.829 6m straight Hard drawn 3500 2900 * DN 32 31.75 1.22 1.04 1 1 /4" x 18 1.046 18m coil Annealed 2780 2300 50103268 DN 32 31.75 1.22 1.04 1 1 /4" x 18 1.046 6m straight Hard drawn 2780 2300 * DN 40 38.10 1.22 1.04 1 1 /2" x 18 1.264 18m coil Annealed 2300 1910 50103291 DN 40 38.10 1.22 1.04 1 1 /2" x 18 1.264 6m straight Hard drawn 2300 1910 50103319 DN 50 50.80 1.22 1.04 2" x 18 1.699 6m straight Hard drawn 1710 1420 50103339 DN 65 63.50 1.22 1.04 2 1 /2" x 18 2.134 6m straight Hard drawn 1370 1130 50103358 DN 80 76.20 1.63 1.39 3" x 16 3.414 6m straight Hard drawn 1520 1260 50103367 DN 90 88.90 1.63 1.39 3 1 /2" x 16 3.995 6m straight Hard drawn 1300 1080 50103369 DN 100 101.60 1.63 1.47 4" x 16 4.577 6m straight Hard drawn 1200 1000 50103379 DN 125 127.00 1.63 1.47 5" x 16 5.739 6m straight Hard drawn 960 800 50103383 DN 150 152.40 2.03 1.83 6" x 14 8.573 6m straight Hard drawn 1000 830 50103393 DN 200 203.20 2.03 1.78 8" x 14 11.470 6m straight Hard drawn 720 600 * Denotes tube made to order where minimum order quantities required. Annealed Bendable Quality, reliability, and performance > >

Water > Gas > Waste Crane Item Number Nominal Size Outside Diameter Wall Thickness Min. Wall Thickness Type C - Copper Tube Imperial Equivalent O.D. and swg Nominal Weight (kg/m) Form Temper Safe Working Pressure (kpa) @ 50 C Safe Working Pressure (kpa) @>50 & 75 C * DN 10 9.53 0.71 0.60 3 /8" x 22 0.176 18m coil Annealed 5520 4570 50103001 DN 10 9.53 0.71 0.60 3 /8" x 22 0.176 6m straight Hard drawn 5520 4570 * DN 15 12.70 0.71 0.60 1 /2" x 22 0.239 18m coil Annealed 4070 3370 50103033 DN 15 12.70 0.71 0.60 1 /2" x 22 0.239 6m straight Bendable 4070 3370 50103125 DN 18 15.88 0.91 0.77 5 /8" x 20 0.383 18m coil Annealed 4180 3470 50103127 DN 18 15.88 0.91 0.77 5 /8" x 20 0.383 6m straight Bendable 4180 3470 50103153 DN 20 19.05 0.91 0.77 3 /4" x 20 0.464 18m coil Annealed 3450 2860 50103157 DN 20 19.05 0.91 0.77 3 /4" x 20 0.464 6m straight Bendable 3450 2860 * DN 25 25.40 0.91 0.77 1" x 20 0.626 18m coil Annealed 2560 2130 50103219 DN 25 25.40 0.91 0.77 1" x 20 0.626 6m straight Hard drawn 2560 2130 * Denotes tube made to order where minimum order quantities required. Annealed Bendable Crane Item Number Nominal Size Outside Diameter Wall Thickness Min. Wall Thickness Type D - Copper Tube Imperial Equivalent O.D. and swg Nominal Weight (kg/m) Form Temper Safe Working Pressure (kpa) @ 50 C Safe Working Pressure (kpa) @>50 & 75 C 50103265 DN 32 31.75 0.91 0.77 1 1 /4" x 20 0.788 6m straight Hard drawn 2040 1690 50103288 DN 40 38.10 0.91 0.77 1 1 /2" x 20 0.951 6m straight Hard drawn 1690 1400 50103316 DN 50 50.80 0.91 0.77 2" x 20 1.275 6m straight Hard drawn 1260 1050 50103336 DN 65 63.50 0.91 0.77 2 1 /2" x 20 1.600 6m straight Hard drawn 1010 830 50103357 DN 80 76.20 1.22 1.04 3" x 18 2.569 6m straight Hard drawn 1130 940 * DN 90 88.90 1.22 1.04 3 1 /2" x 18 3.004 6m straight Hard drawn 970 800 50103368 DN 100 101.60 1.22 1.09 4" x 18 3.440 6m straight Hard drawn 890 740 * DN 125 127.00 1.42 1.27 5" x 17 5.008 6m straight Hard drawn 830 690 50103382 DN 150 152.40 1.63 1.47 6" x 16 6.902 6m straight Hard drawn 800 660 * Denotes tube made to order where minimum order quantities required. Quality, reliability, and performance > >

Safe Working Pressures The safe working pressures for varying temperatures may be calculated from the following formula; P sw = 2000 x S D x t m D - t m Where S D = maximum allowable design tensile stress for annealed copper (MPa) t m = minimum wall thickness D = Outside diameter of tube Values for S D Temperature range ºC Maximum allowable design tensile stress MPa 50 41 >50, 75 34 >75, 125 33 >125, 150 32 >150, 175 28 >175, 200 21 Testing Pressure The test pressure is the recommended maximum pressure that can be applied to copper tube for short periods of time. P t = 1.5 x P sw Where: P sw = Safe working pressure of the copper tube Physical Properties of Copper Tube Composition Alloy C12200 Copper= 99.90%min; Phosphorus=0.015-0.040% Melting point 1083 C Density Thermal Expansion Modulus of Elasticity 8.94 x 10³kg/m³ 0.177mm/10 C.m 17,000 MPa Tube Temper Annealed Bendable Hard Drawn Hardness 70 max. 80-100 100 min. Yield (0.2% proof), (MPa) 70 220 350 Ultimate (MPa) 220 280 380 Crane Copper Tube ABN 51 008 408 151 A Division of Crane Enfield Metals Pty. Limited Information contained in this brochure is provided as a guide only. Crane Copper Tube does not warrant that the information is accurate or without errors or omissions. Crane Copper Tube reserves the right to correct any errors or misprints. All information and product details contained within this document are provided as a guide only. Product use shall be conducted by a fully licensed plumber. PO Box 319, Penrith NSW 2751 Phone: 02 4720 5350 Fax: 02 4720 5390 sales@cranecopper.com.au www.cranecopper.com.au CRN8316.BMS0610