0,00 Technical Data Sheet Application: The snow retention clamp, invented by Meinhard Kling, is the central component of the Kling snow 7 retention system and allows the snow retention system to be installed on a sheet metal roof without penetrating the roof skin. With the aid of the Kling snow retention systems, slipping of the snow quantities is prevented by means of snow retention rows, which are fixed on the standing seam. The number and arrangement of the snow retention systems depends on the roof inclination, the length of the panels and the expected snow load (snow load zone) (DIN 10-). Note: In all cases the technical regulations (of the respective countries), legal regulations (of the respective countries), statics and local conditions must be observed! Schneefangrohr Rohrverbinder Abstand Eishalter 1 F Abstand Schneefangreihen Doppelrohr-Aufstockelement Dreieckform 108 E 7 180,00 x M1 x 0 Snow retention clamp for standing and angle crevices suitable for pipes with mm Ø. D -Material: Clamp - Aluminium.0 ; Art.Nr.: PA10010 Copper EN 101 ; Art.Nr.: PC10010 Datum Name Material: Gezeichnet.0.017 Marvin Kiesel Kontrolliert Norm DIN 90- Status Änderungen Datum Name Stainless Steel 1.01; Art.Nr.: PE10010 C Screws - Stainless Steel VA 1.01 DB_Montage_BG1 7,00,00 *Size Alu B Datum Name Material: Gezeichnet 0.0.017 Marvin Kiesel Kontrolliert Norm DIN 90-1 DB_ für Steh- und Winkelfalzdächer A
1,00 17,00 171 Technical Data Sheet Doppelrohr-Aufstockelement Dreieckform,00 Double-tube stacking element suitable for pipes with mm Ø. The stacking element is mounted on the snow retention clamp (not included in the article). 1,00 -Material: Aluminium. ; Art.Nr.: PA010 Copper EN 1 ; Art.Nr.: PC010 Stainless Steel 1.01; Art.Nr.: PE010 10,00,00 0 pcs Doppelrohr-n Double-tube snow retention clamp made of one piece embossed for tubes with mm Ø.,00,00 11,0 -Material: Aluminium.0 ; Art.Nr.: PA0010 Copper EN 101 ; Art.Nr.: PC0010 Stainless Steel 1.01; Art.Nr.: PE0010,00 180 Doppelrohr-Aufstockelement zur Rohrfixierung,0 Double-tube stacking element suitable for pipes with mm Ø. The stacking element is mounted on the snow retention clamp (not included in the article). 1 -Material: Aluminium. ; Art.Nr.: PA0010 Copper EN 101 ; Art.Nr.: PC0010 1, 9,00 1,00 17
Doppelrohr-Aufstockelement Rechteckform 80,00 7,00 Double-tube stacking element suitable for pipes with mm Ø. The stacking element is mounted on the snow retention clamp (not included in the article). 1 -Material: Aluminium.0 ; Art.Nr.: PA0010 Copper EN 101 ; Art.Nr.: PC0010,00 Schneefangrohre Snowing tube / mm for attachment to the snow retention clamp.,00 8,00 -Material: Aluminium.0 ; Meter Art.Nr: PZ0010 Meter Art.Nr: PZ000 Copper EN 101 ;, Meter Art.Nr: PZ0010 Meter Art.Nr: PZ000 Stainless Steel 1.01; Meter Art.Nr: PZ010 Meter Art.Nr: PZ011 On request Schneefangrohr Endkappen End caps for snow-catching pipes /mm. -Material: PVC black; Art.Nr: PZ000
Rohrverbinder Polyamid. connectors for a safe expansion of snowtubes,00 1,0 -Material: Polyamid. 7,00 0,0 97,00 -Size: AD Ø 7,0 mm - grey ; Art.Nr.: PZ0010 AD Ø,0 mm - black ; Art.Nr.: PZ10010 0 pcs Eishalter Ice tray with VA screws for mounting under the snow tube R1,00 -Material: Aluminium.0 ; Art.Nr.: PA0010 Copper EN 101 ; Art.Nr.: PC0010 Stainless Steel 1.01; Art.Nr.: PE0010 Abgerundete Ecken 100 pcs 1,0 *On request, the snow retention systems can be powder coated in a RAL colour of your choice.
Quality: All long sliding clips are industrially produced with stamping and bending machines. Internal quality controls ensure a consistently high quality of fastening elements. Extraction values: The extraction values of the snow retention clamp are dependent on a correct assembly and the observation of the required tightening torques of the screws of Nm. For the Kling Dach snow retention clamp deduction values of 100N (10kg) can be assumed for the calculation. Assembly: Careful assembly of the individual snow retention clamp is indispensable. The snow retention clamps must be fastened to the seam with a tightening torque of Nm. The standard mounting is described in the mounting instructions video at www.klingdach.de Roof substructure: The roof skin and the snow retention system can only withstand the stresses the roof substructure can withstand. Before applying the fastening, the structure of the subconstruction must be checked for the required quality and strength. The required nominal thickness of the formwork for roofing is at least mm (mm for wood-based panels) at the time of installation. The thrust force of the snow load must be taken into account when arranging the fixed clips. Arrangement: The arrangement of the required number of snow retention clamps in order to safely hold the thrust force of the snow load must be calculated expertly according to the regulations of the ZVSHK. You can also have Kling Dach perform a standard calculation. The snow retention clamps shall be placed on each or at least every second fold in the snow retention line, but the maximum distance between the snow retention clamps may not exceed 80cm. The required number of snow retention rows should be installed at the same distance on the roof.