Q Pearson Education, Inc.

Similar documents
Torque Review. 3. What is true about the Torques on an object in rotational equilibrium?

- a set of known masses, - four weight hangers, - tape - a fulcrum upon which the meter stick can be mounted and pivoted - string - stopwatch

AP Physics 1 Lesson 4 Homework Outcomes Quiz 4 Preparation. Name. Date. Period

EQUILIBRIUM/CENTER-OF-GRAVITY (honors)

Honors Physics Rotation HW, statics (Homework)

PhysicsAndMathsTutor.com

Irrigation &Hydraulics Department lb / ft to kg/lit.

Homework of chapter (3)

Lab 7 Rotational Equilibrium - Torques

and its weight (in newtons) when located on a planet with an acceleration of gravity equal to 4.0 ft/s 2.

3. Moments and Pressure

2 Available: 1390/08/02 Date of returning: 1390/08/17 1. A suction cup is used to support a plate of weight as shown in below Figure. For the conditio

Appendix : Categorization Task. Instructions

Physics P201 D. Baxter/R. Heinz

BUOYANCY, FLOATATION AND STABILITY

MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.

Name Period Date. Record all givens, draw a picture, arrow all vectors, write the formula, substitute and solve. units

Kinematics 1. A. coefficient of friction between the cart and the surface. B. mass of the cart. C. net force acting on the cart

3. A fluid is forced through a pipe of changing cross section as shown. In which section would the pressure of the fluid be a minimum?

LAB 7. ROTATION. 7.1 Problem. 7.2 Equipment. 7.3 Activities

Equilibrium. Observations

Chapter 11 [ Edit ] Exercise w = = 780. Chapter 11. Part A. Part B. Part C. Part D

REVIEW : KINEMATICS

Instructor: Biswas/Ihas/Whiting PHYSICS DEPARTMENT PHY 2053 Exam 1, 120 minutes October 14, 2009

Physics Final Exam Review Fall 2013

Physics 23 Exam 1 Spring 2009 Dr. Alward Page 1

Name: SOLUTIONS MIDTERM 2, Spring 2019

Old-Exam.Questions-Ch-14 T072 T071

5. A bead slides on a curved wire, starting from rest at point A in the figure below. If the wire is frictionless, find each of the following.

Level 3 Cambridge Technical in Engineering 05822/05823/05824/05825/05873 Unit 3: Principles of mechanical engineering

Circular Motion - Horizontal

Homework #10 Due Monday, May Compute the moment of inertia of the objects below.

Motion, Vectors, and Projectiles Review. Honors Physics

1. downward 3. westward 2. upward 4. eastward

TEACHER ANSWER KEY December 10, Projectile Review 1

Advanced Subsidiary / Advanced Level

. In an elevator accelerating upward (A) both the elevator accelerating upward (B) the first is equations are valid

Level 2 Physics, 2012

The diagram below represents the path of a stunt car that is driven off a cliff, neglecting friction.

1 A Mangonel is a type of catapult used to launch projectiles such as rocks. A student made a working model of a Mangonel. crossbar. bucket.

(i) Write down equations for x and y in terms of t. (iii) Find the range of the golf ball.

AP Physics B Fall Final Exam Review

b. What is the x-distance from the foot of the cliff to the point of impact in the lake?

Lesson 5. Section 2.2: Trigonometric Functions of an Acute Angle 1 = 1

PHYS 101 Previous Exam Problems

computed using Equation 3-18 by setting the 2nd term equal to 0 and K A equal to K o and using the pressure distribution as shown in Figure 3-23.

3) A horse gallops a distance of 10 kilometers in a time of 30 minutes. Its average speed is A) 15 km/h. B) 20 km/h. C) 30 km/h. D) 40 km/h.

Scaling. Vector Addition 5.)

Analysis and Research of Mooring System. Jiahui Fan*

Regents Exam Practice: Measurement, Kinematics, Free Fall, PJM, and UCM

Lesson 14: Simple harmonic motion, Waves (Sections )

AP Physics 1 Fall Semester Review Problems 1-10 Due Thursday, Due Friday, Test on Monday

1 Mechanical Equilibrium

FC-CIV HIDRCANA: Channel Hydraulics Flow Mechanics Review Fluid Statics

Chapter 4 Surface Tension

Question: Bicycles. Vehicle s Static Stability, Part 1. Observations About Bicycles. Vehicle s Static Stability, Part 2

Simple Machines Problem Set. 2. What does it mean to say that a machine has a certain mechanical advantage?

1. All fluids are: A. gases B. liquids C. gases or liquids D. non-metallic E. transparent ans: C

Question: Bicycles. Observations About Bicycles. Static Stability, Part 1. Static Stability, Part 2. Static Stability, Part 3

Chapter 16. Waves-I Types of Waves

QUESTION 1. Sketch graphs (on the axes below) to show: (1) the horizontal speed v x of the ball versus time, for the duration of its flight;

Practice Test: Vectors and Projectile Motion

1. Air is blown through a pipe AB at a rate of 15 litre per minute. The cross-sectional area of broad

Vocabulary Force: A push or a pull.

1) What is the magnitude of the momentum of a kg baseball traveling at 45.0 m/s?

+ t1 t2 moment-time curves

Applications of trigonometry

Quiz name: Chapter 13 Test Review - Fluids

COURSE NUMBER: ME 321 Fluid Mechanics I Fluid statics. Course teacher Dr. M. Mahbubur Razzaque Professor Department of Mechanical Engineering BUET

3 1 PRESSURE. This is illustrated in Fig. 3 3.

Background physics concepts (again)

Q1. The diagram shows two buses. Bus A is empty. Bus B contains bags of sand upstairs to represent passengers.

Assignment 1 Unit 3 Work, Power, Efficiency, and Potential Energy Name: Multiple Choice. Show workings where necessary.

Unit Conversion Worksheet

Chapter 6. You lift a 10 N physics book up in the air a distance of 1 meter at a constant velocity of 0.5 m/s. The work done by gravity is

Kinematics-Projectiles

Exam Question 9: Hydrostatics. March 6, Applied Mathematics: Lecture 8. Brendan Williamson. Introduction. Density, Weight and Volume

MECHANICS: VECTORS QUESTIONS. Janet s car and springs (2015;3)

Forces that govern a baseball s flight path

Angle Projectiles Class:

time v (vertical) time

SOLUTIONS TO TUTORIAL EXAMPLES CHAPTER 13

Interesting sporting examples for motivating student learning in Mechanics. Stephen Lee (MEI) Abstract. Ball straight up in the air 20/07/2012

MECHANICS: EQUILIBRIUM QUESTIONS

Motion is a function of both direction and speed. The direction may

NEWTON S LAWS OF MOTION

PHYSICS 20 Vectors and Dynamics

Chapter 9 Solids and Fluids

Chapter 6: Air Pressure Measuring air pressure Variations due to temperature and water vapor Development of pressure systems Generation of winds

Chapter 6: Air Pressure Measuring air pressure Variations due to temperature and water vapor Development of pressure systems Generation of winds

LINEAR MOTION. General Review

AP Physics B Summer Homework (Show work)

Fluid Mechanics. Chapter Three: Fluid Statics. Dr. Amer Khalil Ababneh

Agood tennis player knows instinctively how hard to hit a ball and at what angle to get the ball over the. Ball Trajectories

Calculate the average acceleration during the 4.6 s time interval. Give your answer to an appropriate number of significant figures.

Biomechanics Sample Problems

Kinematics Review. What distance did the object travel in moving from point A to point B? A) 2.5 m B) 10. m C) 20. m D) 100 m

D) 83 m D) Acceleration remains the same and speed increases. C) 216 m B) 6.0 m shorter A) 4.5 s A) 15 km/hr C) 47 m C) 20 m/sec B) 20 m/sec

MASSACHUSETTS INSTITUTE OF TECHNOLOGY DEPARTMENT OF MECHANICAL ENGINEERING 2.06 Fluid Dynamics

Figure 1: Level Pitch Positive Pitch Angle Negative Pitch Angle. Trim: The rotation of a vehicle from side to side. See Figure 2.

Transcription:

Q11.1 Which of the following situations satisfies both the first condition for equilibrium (net force = 0) and the second condition for equilibrium (net torque = 0)? A. an automobile crankshaft turning at an increasing angular speed in the engine of a parked car B. a seagull gliding at a constant angle below the horizontal and at a constant speed C. a thrown baseball that does not rotate as it sails through the air D. more than one of the above E. none of the above

A11.1 Which of the following situations satisfies both the first condition for equilibrium (net force = 0) and the second condition for equilibrium (net torque = 0)? A. an automobile crankshaft turning at an increasing angular speed in the engine of a parked car B. a seagull gliding at a constant angle below the horizontal and at a constant speed C. a thrown baseball that does not rotate as it sails through the air D. more than one of the above E. none of the above

Q11.2 A rock is attached to the left end of a uniform meter stick that has the same mass as the rock. How far from the left end of the stick should the triangular object be placed so that the combination of meter stick and rock is in balance? A. less than 0.25 m B. 0.25 m C. between 0.25 m and 0.50 m D. 0.50 m E. more than 0.50 m

A11.2 A rock is attached to the left end of a uniform meter stick that has the same mass as the rock. How far from the left end of the stick should the triangular object be placed so that the combination of meter stick and rock is in balance? A. less than 0.25 m B. 0.25 m C. between 0.25 m and 0.50 m D. 0.50 m E. more than 0.50 m

Q11.3 A metal advertising sign (weight w) is suspended from the end of a massless rod of length L. The rod is supported at one end by a hinge at point P and at the other end by a cable at an angle from the horizontal. What is the tension in the cable? A. T = w sin B. T = w cos C. T = w/(sin ) D. T = w/(cos ) E. none of the above

A11.3 A metal advertising sign (weight w) is suspended from the end of a massless rod of length L. The rod is supported at one end by a hinge at point P and at the other end by a cable at an angle from the horizontal. What is the tension in the cable? A. T = w sin B. T = w cos C. T = w/(sin ) D. T = w/(cos ) E. none of the above

A11.4 A metal advertising sign (weight w) is suspended from the end of a massless rod of length L. The rod is supported at one end by a hinge at point P and at the other end by a cable at an angle from the horizontal. Which of these forces is least? A. the weight of the sign B. the tension in the cable C. the vertical force component exerted on the rod by hinge P D. two or more of these are tied for least

A11.4 A metal advertising sign (weight w) is suspended from the end of a massless rod of length L. The rod is supported at one end by a hinge at point P and at the other end by a cable at an angle from the horizontal. Which of these forces is least? A. the weight of the sign B. the tension in the cable C. the vertical force component exerted on the rod by hinge P D. two or more of these are tied for least

Q11.5 Two rods are made of the same kind of steel and have the same diameter. A. more stress and more strain. B. the same stress and more strain. C. the same stress and less strain. D. less stress and less strain. E. the same stress and the same strain. length L length 2L A force of magnitude is applied to the end of each rod. Compared to the rod of length L, the rod of length 2L has

A11.5 Two rods are made of the same kind of steel and have the same diameter. A. more stress and more strain. B. the same stress and more strain. C. the same stress and less strain. D. less stress and less strain. E. the same stress and the same strain. length L length 2L A force of magnitude is applied to the end of each rod. Compared to the rod of length L, the rod of length 2L has

Q11.6 Two rods are made of the same kind of steel. The longer rod has a greater diameter. A. more stress and more strain. B. the same stress and more strain. C. the same stress and less strain. D. less stress and less strain. E. the same stress and the same strain. length L length 2L A force of magnitude is applied to the end of each rod. Compared to the rod of length L, the rod of length 2L has

A11.6 Two rods are made of the same kind of steel. The longer rod has a greater diameter. A. more stress and more strain. B. the same stress and more strain. C. the same stress and less strain. D. less stress and less strain. E. the same stress and the same strain. length L length 2L A force of magnitude is applied to the end of each rod. Compared to the rod of length L, the rod of length 2L has