Pool & Fountain Paints & Deck Coatings Guide. The paint system for every residential or commercial pool, fountain and deck

Similar documents
PRO-TEX TRUCKBED LINER TECHNICAL DATA SHEET

Technical Data Sheet PART A & PART B

DFT in excess of 8.0 mils per coat is not recommended.

Imron Industrial Strength Ultra Low VOC Polyurethane Clear Reduced Gloss Modifications

Carboguard 893 PRODUCT DATA SHEET SELECTION & SPECIFICATION DATA. Generic Type. Cycloaliphatic Amine Epoxy

*RTS not recommended for immersion service. Do not exceed 10 mils in a single coat (without additives)

Polidura Glossy PU Topcoat Component A: 6103 Component B: 6199

An Axalta Coating Systems Brand. New Look, Lasting Protection.

Can be used on helidecks, walkways, ramps, weigh bridge decks, decks in general where abrasion resistance and non-slip properties are required.

Self-priming. May be applied over most generic types of coatings.

*Valid if manufactured at a certified location. Light Grey (0700), White (0800), and Light Blue (0100). Colors are unmatched

Two coats are normally recommended. Some service may require mils DFT

XL7000 Complete Chlorine Pool Kit

For Establishing and Maintaining Your Spa using PROtech Spa Chemicals

PD100 White, PD200 Black Low VOC Acrylic Polyurethane Topcoat

Imron Reduced Gloss Polyurethane Topcoat (QM, QA, QF Quality)

Aerodur 2111 Chrome Free Primer

COATINGS SPRAY GUIDE Urethane 520

Hardener: at least 24 months when stored cool and dry

Paintchlore ALIPHATIC ONE-COMPONENT POLYURETHANE RESIN FOR SWIMMING-POOL PROTECTION

Protective & Marine Coatings

Advantages of ALEXIT BladeRep

To be used as a coating for potable water tanks and pipes. Independently tested and certified for potable water storage. Other

SPECIALLY ENGINEERED TO HELP GROW YOUR BUSINESS

DIAMOND COAT PLUS Form P-203 (5/95) 3.5 VOC Clear. (#) DT 898 (90 F & Above) (32 C & Above) DT 8110 (85 F & Above) (29 C & Above)

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 36 C calculated VOC-US/Hong Kong US EPA method 24 (tested)

MAINTAINING THE. Perfect Balance IN UNIVERSITY POOLS. by Ellen Meyer

Before you begin your job you will need: Tiling Hints: Factory Tile:

10P20-13 High Solids Primer

Imron 2.1 HG + Polyurethane High Gloss Topcoat

Versatile On Ground/Semi-Inground Pool Systems. Featuring the ROCKWOOD. and CHAMPLAIN Series. lathampool.com

weber.cote Pool Paint

T17 Scrubber PARTS & CONSUMABLES

SECTION SHOWER AND BATH ENCLOSURES. Display hidden notes to specifier by using Tools / Options / View / Hidden Text.

Property Test/Standard Description

Slam Dunk GYM SYSTEM. The 4 GM/L VOC WATER BASED POLYSACCHARIDE ACRYLIC GYM FINISH GUARANTEED TO LAST 2 YEARS

Imron 2.1 PR Polyurethane Primer

S0200V. Product Data Sheet August Primecoat P FOR PROFESSIONAL USE ONLY. Product Description

Property Test/Standard Description

S P A C A R E G U I D E

ARM & HAMMER Baking Soda

Heresite VR-514 T E C H N I C A L D A T A S H E E T

Lifeline Exterior. Our Value Priced Exterior Wall Stain

PRODUCT CATALOG 2018 Reinforced Swimming Pool Membranes and Accessories

COATINGS SPRAY GUIDE Acrylics (210, 211, 211HT, and 212)

DTM Coatings for Rail. Polyaspartic Ester Technology By Kurt Best Bayer MaterialScience

Mix ratio (by volume for base and activator): CA8022/B7022 (base component) CA8020DX (activator component) 920K058 (pumice component)

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 35 C calculated IED (2010/75/EU) (theoretical)

Vanguard Complete Chlorine Pool Kit

TECHNICAL DATA SHEET 02GN070A. 02GN070A Epoxy Primer. Product Description. Components. Specifications

Technical Data Megacote

44GN098 Water Reducible High Performance Epoxy Primer

Property Test/Standard Description

Chemicals Explained. Lowest Prices Guaranteed! Educated pool owners appreciate our smart packaging POOL CHEMICALS EXPLAINED

44GN072 Water Reducible Low Density Epoxy Primer

AMERCOAT 370. PRODUCT DATA SHEET June 16, 2016 (Revision of October 9, 2015) DESCRIPTION. Two-component, fast dry multi-purpose epoxy coating

D8126 EU-142. CERAMICLEAR Mar and Scratch Resistant Clearcoat. Preparation of Substrate: Required Products. Product Description:

PRODUCT DATA SHEET. Advanced Industrial Coatings 2.1 VOC Epoxy Primer AIP302 Gray, AIP303 White PERSONAL PROTECTION SURFACE PREPARATION

ProAir Clear LV 2 Pack

AkzoNobel Aerospace Coatings. Primerr. Product Group. Epoxy primer. Characteristics Product Information. resistance. Components * TR-114. permits.

To be used as a coating for potable water tanks and pipes. Independently tested and certified for potable water storage. Other

A + a holiday in your own backyard. Pools Built to Perform. No Fuss Installation

PRODUCT CATALOG 2016/17. Reinforced Swimming Pool Membranes and Accessories

NATIONAL PAINT SYSTEMS SPECIFIER

Autoclear Mix & Matt

PACKAGING: Component A W-THANE HBA CD (2,7 L) Component B W-THANE 5057 CD (0,9 L)

EC96 HS Epoxy Topcoat. 1 part. ACT197 (Activator) near matt. 1 part

02GN093 Chrome-Free Epoxy Primer. Kit size 02GN093 base 02GN093CAT Gallon 96oz/2.84L 32oz/946mL Quart 24oz/710mL 8oz/237mL

D8150 EU-139. Performance Clearcoat. Preparation of Substrate:

DuraPad On-Deck Circles

Property Test/Standard Description. 63± 2 % Gloss level (GU 60 ) ISO gloss (70-85) Flash point ISO 3679 Method 1 30 C

Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 25 C

FOR LESS! The Secret to a Sparkling Pool and Patio. Enjoy a crystal clear pool with ARM & HAMMER Baking Soda

This versatile, quick drying, easy to apply and sand primer may be applied as a conventional spray filler or primer surfacer.

General: Primarily designed for maintenance and repair. In immersed environments Jotamastic 80 Aluminium is suitable.

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 33 C calculated VOC-USA / VOC Hong Kong EPA Method 24

DP40 is a versatile 2K Epoxy Surfacer. It is light grey in colour, chromate-free and has good corrosion resistance over bare metal.

D839 can be applied as a conventional spray filler, primer surfacer or sealer. It may be air-dried, low baked or IR cured.

Specially designed for maintenance and repair of dedicated water ballast tanks on vessels and offshore structures. Other

Property Test/Standard Description

Property Test/Standard Description

Property Test/Standard Description

The Modular Pool Professionals Judged Best Modular Pool in Australia by SPASA

Before application, test the atmospheric conditions in the vicinity of the substrate for the dew formation according to ISO

PAC33 Polyurethane Primer. Mix Ratio (by volume) 4355/3600 (Base) 5 parts 0701/9000 (Activator) 1 part 0433/9000 (Thinner) 4-5 parts

Approved. Marine: Exterior areas, specially designed for outside hull, may be used on superstructure, decks and other external areas.

PR143 (ACT 149) Epoxy Primer

As Supplied : 1.67 lbs/gal (200 g/l) Plasite Thinner #71 : 10% by volume 2.18 lbs/gal (261 g/l)

44GN008A Water Reducible Type II Epoxy Primer

Epoxy Non-chromate Corrosion Inhibiting Primer. Alumigrip 4101P001 Alumigrip 4901 (CS4901) AkzoNobel Aerospace Coatings. Bombardier Hawker Beechcraft

aluminium, aluminium red toned, black, white and according to Multicolor Industry tinting system (MCI)

Pool Inspection. Your Street San Diego, California Prepared for: Your Name Prepared by: Priority Inspection Service

Your spa and the water

TECHNICAL DATA SHEET CA7040. CA7040 HS CF Polyurethane Primer. Product Description. Components. Specifications. Surface Preparation and Pretreatment

two component solvent free amine cured phenolic epoxy coating (1 g/cm³ = 8.25 lb/us gal; 1 m²/l = 40.7 ft²/us gal) (data for mixed product)

NAVSEA REVIEWED ASTM F-718. If this product is to be applied as part of a coating system, all components of the system must be as listed on the QPL.

Approved. Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 55 C VOC-US/Hong Kong. US EPA method 24 (tested)

GWINNETT COUNTY SWIMMING POOL PLAN REVIEW CHECKLIST

Mix ratio (by volume): 44GN011 (base component) 44GN011CAT (catalyst component) Reducer (Distilled or Deionized water) MCS0200 Grade E

Lincoln County Environmental Health Department 302 North Academy Street, Suite B Lincolnton, NC Phone: Fax:

Transcription:

Pool & Fountain Paints & Deck Coatings Guide The paint system for every residential or commercial pool, fountain and deck

EPOXY EP Epoxy Pool Paint EP Hi-Build Epoxy Pool Paint This superior high build epoxy coating is formulated to provide the longest lasting finish of any pool paint. Renovates aged concrete, plaster, and fiberglass/ gelcoat surfaces Provides up to eight or more years of service life Satin finish Abrasion and chemical-resistant An excellent choice for spas and slides on bare surfaces Alternative to plastering at one-third the cost Three hour pot-life when component A and B (catalyst) are mixed together Do not apply to weak or unsound surface Non-tintable 2 Mixing Mix Part A Mixing with Part B Protects previously painted epoxy or unpainted concrete/plaster/fiberglass/ gelcoat swimming pools and spas Excellent choice for water park facilities, including lazy rivers High gloss, tile-like finish provides ease of cleaning Abrasion and chemical-resistant Eight-hour pot life when component A and B (catalyst) are mixed together at 75 degrees F BEACH BEIGE This premium low film build epoxy coating is formulated to provide ease of and excellent coverage rates. Up to 125 sq ft per kit 5-7 dry days outdoors orsolvent Xylene Fill days Time on first coat; 300 sq ft 10-14 indoors Clean-Up BEACH BEIGE DARK BLUE ROYAL BLUE VERMILLION RED Mixing Mix Part A Mixing with Part B Up to 200 sq ft per Fill Time kit on first coat; up to 10-14 days indoors 500 square feet Solvent Clean-Up

WATER-BASED DS Water-Based Acrylic Pool Paint This acrylic pool paint is formulated to offer all of the advantages of water-based technology. It can be applied over most previously painted pool surfaces and in damp environments. Aqualuster Water-Based Acrylic Pool Paint This acrylic coating can topcoat existing acrylic surfaces and is VOC compliant throughout the US. Excellent solution when short down-time is critical Adheres best on a cool, damp (not wet), and extremely clean surface Matte finish Not for use on fiberglass/gelcoat pools and spas Do not store product at temperatures less than 32 F Can be applied to damp (not wet) surfaces Two coat system Gloss finish provides ease of cleaning Not for use on fiberglass Not for use in spas or hot tubs Do not store at temperatures below 32º Do not use on bare surfaces BEACH BEIGE DARK BLUE ROYAL BLUE BRICK RED DARK BLUE ROYAL BLUE Up to 250 sq ft per kit on first coat; up to 400 sq ft /gal 10 days indoors Soap & Water Up to 450 sq ft /gal Soap & Water www.ramucpoolpaint.com 3

RUBBER-BASED A-2 Premium Rubber-Based Paint This premium rubber coating is formulated to provide excellent hiding, coverage, and protection. It restores and upgrades previously painted chlorinated rubber and synthetic rubber surfaces. It is VOC Compliant for all 50 states and Canada. Superior coverage rate compared to other rubber based paints High gloss finish allows for easy cleaning Easy to apply by roller or airless spray Must be applied to a dry surface Not for use on spas or fiberglass/gelcoat surfaces Best when used to topcoat previously painted synthetic or chlorinated rubber painted surfaces Ultra Pro 2000 Low VOC Rubber Pool Paint This commercial rubber coating is competitively priced and designed for commercial use where pool maintenance is scheduled annually. Compatible with chlorinated rubber painted swimming pools and synthetic rubber coated pools, flat finish Up to 2 years of service life Use Skid-Tex Additive to achieve non-slip surface VOC compliant in all 50 states Must be applied to dry surfaces Flat finish Not for use on spas or fiberglass/gelcoat pools VOC restrictions may apply Available Colors: NEW! Up to 250 sq ft on first coat; up to 400 sq ft /gal 10 days indoors Up to 250 sq ft on first coat; up to 400 square feet on recoats 10-14 days indoors 4

Pro 2000 Chlorinated Rubber This chlorinated rubber coating is competitively priced and designed for commercial use where pool maintenance is scheduled annually. Compatible with chlorinated rubber painted swimming pools Must be applied to dry surfaces Flat finish Not for use on spas or fiberglass/gelcoat pools VOC restrictions may apply Available Colors: Type A Chlorinated Rubber This premium chlorinated rubber coating is formulated to provide excellent hiding, coverage, and protection. It restores and upgrades previously painted chlorinated rubber surfaces and has been the paint choice of swimming pool professionals for more than 70 years. Superior coverage rate compared to other chlorinated rubber paints High gloss finish allows for easy cleaning Easy to apply by roller or airless spray Must be applied to a dry surface Not for use on spas, or fiberglass/gelcoat pools VOC restrictions may apply DARK BLUE ROYAL BLUE 175 square feet on bare surface; up to 300 square feet 10-14 days indoors 300 square feet on bare surface; up to 400 square feet 10-14 days indoors www.ramucpoolpaint.com 5

DECK PRODUCTS Acrylic Deck Coat This water-based acrylic deck coating is formulated for upgrading Kool-Deck and other textured concrete deck surfaces. Keeps your deck cool while protecting it from harsh UV rays Not intended for immersion Direct contact with strong acids or chlorine solutions may cause discoloration Not for use on wood decks Do Not Spray Available Colors: DECK COAT ARIZONA SAND CAYMAN SAND DUNE SHADOW SILVER CREEK WHISPER ACCESSORY PRODUCTS Skid-Tex This non-skid additive creates a slip-resistant surface on concrete decks or pool surfaces. It can be used with all RAMUC Pool Paints. Recommended use is one carton (1 lb.) per gallon or broadcast as needed on first coat of paint followed by a second coat to seal the surface. Polyurethane Sealants Vulkem 116 is an excellent general-purpose polyuretane sealant designed for use on poured and pre-cast concrete, masonry work, and similar types of construction joints. Vulkem 45SSL is a one-part, moisture-curing, lowmodulus polyurethane sealant. It provides exceptional wear and tear resistance required in high traffic areas. Formulated for use in expansion joints in sidewalks, swimming pool decks, plazas, floors and other horizontal surfaces. Roller/Brush 150 square feet on bare surface; up to 300 sq ft /gal Walk Time 2 Dry Days Soap & Water Specially formulated to reduce spray applied solvent base pool paints. Cleans rollers and spray equipment. 6

BEFORE YOU PAINT... WHAT PAINT TO USE Ramuc Pool Paint COMPATIBILITY CHART PAINT TYPE EPOXY RUBBER ACRYLIC Product Name EP Hi Build EP Type A Pro 2000 Ultra Pro 2000 Type A2 DS Aqualuster BARE SURFACES Concrete HHH HH HHH HH HH HH H T Plaster HHH HH HHH HH HH HH H T Fiberglass HHH HH T T T T T T Gunite HHH H T T T T T T Marcite HHH HH HHH HH HH HH H T SURFACE WITH EXISTING COATING Chlorinated Rubber T T HHH HH HH HHH HH H Synthetic Rubber T T T T T HHH HH H Epoxy HHH HH T T T T H T Acrylic T T T T T T HHH HH DURABILITY Chemical Resistance HHH HHH HH H H HH H H Stain Resistance HHH HHH HHH H H HHH H HH Life Expectancy *Residental up to 8 years up to 4 years up to 4 years up to 2 years up to 2 years up to 4 years up to 2 years up to 2 years *Commercial up to 5 years up to 3 years up to 3 years 1 Season 1 Season up to 3 years 1 Season 1 Season * Water chemistry, surface prep and use, etc. will effect the life of all paints. RATING: GOOD H BETTER HH BEST HHH Do Not Use T To Determine the existing coating on your pool, send a sample chip for analysis to RAMUC Pool Paint HOW MUCH PAINT TO USE Estimating the Quantity of Paint Required: Below are the standard pool configurations together with corresponding simple formulas to calculate the square footage of your pool. Keep in mind that the amount of paint you will need depends on whether your pool surface is rough or smooth. The square foot coverage of each type of paint will determine how much product you will need. RECTANGLE ROMAN KIDNEY OVAL LAZY L Length x Width x 1.65 =Total Sqaure Feet Length x Width x 1.5 =Total Sqaure Feet Length x Width x 1.6 =Total Sqaure Feet Length x Width x 1.65 =Total Sqaure Feet Length x Width x 1.55 =Total Sqaure Feet SURFACE PREPARATION Clean & Prep Solution Used to clean and degrease while simultaneously dissolving mineral deposits, increasing porosity for good adhesion on surfaces prior to painting. Mix Clean and Prep with water according to package directions. Ratio is contingent upon type of surface to be cleaned. Dampen surface with water Apply mixed solution with garden sprayer Scrub thoroughly until foaming stops Flush with clear water and hose. Continue until foam is completely gone and water runs clear. (Sprayer is not recommended) NOTE: do not apply to concrete that has already been sealed or stained. Pool Paints / Fountain www.ramucpoolpaint.com Paints / Deck Coatings 7

RAMUC Pool Paint Beautifies and Protects For more than 70 years, RAMUC Pool Paint has supplied the pool and recreation industry with chlorinated and synthetic rubber, epoxy, and acrylic pool and deck coatings. Our years of experience, coupled with our history of excellent customer service and quality products, have established our commitment to exceed your expectations. Whether you have a backyard pool or spa, an Olympic-size pool or waterpark attraction, our total coatings program offers you quality products, superior service and proven success. Recapture your pool s original beauty. Extend the life of your pool and deck surface with a UV and chemical-resistant finish. Protect your investment. www.ramucpoolpaint.com RAM-137 0117