Chemical Name: Vulkem 116 Polyurethane Sealant. Manufacturer: Tremco. Container size: 10.1oz. Location: VLA. Disposal: Place empty container in trash.

Similar documents
: TREMPRO/VULKEM 636 ALUMINUM 30 CTG/CS

TREMPRO/VULKEM 626 GRAY 5 GAL S/S PAIL Version 1.2 Print Date 09/04/2007 REVISION DATE: 09/01/2006

DYMONIC FC BRONZE Version 1.4 Print Date 05/08/2008 REVISION DATE: 05/07/2008

240 COLOR PAK - ALUMINUM STONE 6 POUCHES Version 2.0 Print Date 10/24/2012 REVISION DATE: 07/08/2012

: UNIVERSAL COLOR PACK SHADOW GRAY-cs

Version 3.0 Print Date 07/09/2012 REVISION DATE: 07/08/2012. After Hours: Chemtrec

PARASEAL 60MIL GM/LG BLACK 8' W x 180' Version 3.0 Print Date 03/05/2013 REVISION DATE: 07/08/2012

TAMMSFLEX NS PART A Version 1. Print Date 06/10/2008 REVISION DATE: 02/07/2008

: TREMFLEX 834 SMOKE&SOUND WHITE-12 QT CTG

: TAMMS EXPRESS REPAIR 50# BG

: TREMPRO 644 RED HIGH TEMP

ALPHAGUARD M-PRIME - 1 GALLON Version 1. Print Date 04/18/2012 REVISION DATE: 10/05/2011

Material Safety Data Sheet

GEOGARD SEAM SEALER 5 GAL Version 2. Print Date 07/07/2009 REVISION DATE: 06/29/2009

: DYMONIC FC ANODIZED ALUMINUM

: KUREZ W VOX - 55 GAL DRUM

PLASTOL SPC - BULK GALLONS Version 3.1 Print Date 01/20/2015 REVISION DATE: 06/20/2013

TREMGLAZE S500 BLACK-30 CTG CS Version 2. Print Date 10/16/2008 REVISION DATE: 10/15/2008

: EUCON DUSTROL - BULK GALLONS

UT91 Version 2. Print Date 05/13/2010 REVISION DATE: 04/14/2010

DURAL 435 PART A Version 3.0 Print Date 01/27/2015 REVISION DATE: 07/08/2012

EUCON CIA - BULK GALLONS Version 2. Print Date 09/13/2008 REVISION DATE: 09/12/2008

MORTAR COLOR#719 LIGHT CHOCOLATE -12/2.5 Version 1 Print Date 07/03/2007 REVISION DATE: 06/16/2005

Version 5.0 Print Date 02/12/2013 REVISION DATE: 02/11/2013

: EUCON WR 91 - BULK GALLONS

: SPEED CRETE RED LINE 50# BAG

: ACCELGUARD GAL DRUM

Version 2.0 Print Date 07/09/2012 REVISION DATE: 07/08/2012

CLEARSEAL WB 150 Version 2.0 Print Date 07/09/2012 REVISION DATE: 07/08/2012

: LINSEED OIL TREATMENT

POWERPLY STANDARD COLD ADHESIVE-52 LINED Version 1.1 Print Date 05/10/2011 REVISION DATE: 08/14/2007

SURFLEX TR Version 2.0 Print Date 03/07/2013 REVISION DATE: 07/08/2012

: SUPER AQUA-CURE VOX

: SPEED PLUG- 50# Bag (USE PAIL)

: DIAMOND - PLATE LIGHT REFLECTIVE

POWERPLY RUB COLD ADH-5 GAL (NWR&SWR)

: SOLARGARD ACRYLIC SEALER 5 GAL

Version 4.0 Print Date 10/28/2014 REVISION DATE: 10/27/2014

: TREMPRIME LV 5 GALLON PAIL

: INTEGRAL WATERPELLER POWDER

TAMMSCURE WB 30C Version 3.0 Print Date 07/08/2012 REVISION DATE: 07/07/2012

: VULKEM 202 Part B. Material Safety Data Sheet SECTION 1 - PRODUCT IDENTIFICATION SECTION 2 - HAZARDS IDENTIFICATION SECTION 3 - PRODUCT COMPOSITION

: THIN-CRETE GROUT - 50# PL MSTY MAUVE

HEY'DI SEALING LIQUID 1GL/6PK Version 1. Print Date 07/13/2007 REVISION DATE: 12/12/2006

: DYMONIC ALUMINUM STONE

KUREZ DR VOX Version 3. Print Date 05/20/2009 REVISION DATE: 05/19/2009

SPEED CRETE GREEN LINE Version 2. Print Date 09/23/2008 REVISION DATE: 09/22/2008

SG ACRYTHANE BIRCH WHITE -B 5 GAL PAIL Version 2. Print Date 07/07/2009 REVISION DATE: 06/29/2009

: ALUMANATION GL PL

: REPUBLIC METAL PRIMER 5 GAL

Tstrata ISR Version 6.0 REVISION DATE: 11/21/2014

SUPER DIAMOND CLEAR VOX LOW VOC Version 2.0 Print Date 04/24/2013 REVISION DATE: 02/08/2013

: EUCOSLIP VOX - 55 GAL DRUM

LUSTER SEAL WB 300 Version 1.1 Print Date 09/11/2007 REVISION DATE: 09/10/2007

VULKEM 350-R GRAY Version 1.4 Print Date 05/15/2008 REVISION DATE: 05/09/2008

: LINSEED OIL TREATMENT -55 GAL DRUM MTO

DYMERIC 240. Material Safety Data Sheet. Version 3.0 Print Date 04/26/2014 REVISION DATE: 04/25/2014

Version 3.0 Print Date 07/08/2012 REVISION DATE: 07/07/2012 SECTION 1 - PRODUCT IDENTIFICATION / PREPARATION INFORMATION

TREMGARD GAL Version 2. Print Date 10/09/2008 REVISION DATE: 10/08/2008

LUSTER SEAL WB 150 Version 3.0 Print Date 07/08/2012 REVISION DATE: 07/07/2012

EUCO QWIKJOINT UVR PART B - 5 GAL PAIL Version 3.0 Print Date 11/05/2012 REVISION DATE: 08/01/2012

Version 3.0 Print Date 07/09/2012 REVISION DATE: 07/08/2012

TAMMSCOAT FN 3100P Version 1. Print Date 05/30/2008 REVISION DATE: 09/21/2007

: EUCO DIAMOND HARD - 55 GAL DRUM

ALPHAGUARD BIO TOP COAT PART B - 1 GAL

Vulkem 350NF/351NF Table of Contents

VULKEM 951 NF SLATE GRAY KIT Version 1.1 Print Date 09/11/2006 REVISION DATE: 09/01/2006

: BARACADE SILANE GAL DRUM

VERTICOAT Version 4.0 Print Date 05/30/2013 REVISION DATE: 05/29/2013

ICE COATING 5 GL Version 1. Print Date 08/27/2009 REVISION DATE: 08/12/2008

DURALKOTE 240 1:1 LT GRAY

Version 3.0 Print Date 03/28/2013 REVISION DATE: 07/08/2012

VULKEM 351 LV GRAY 2 GAL Version 1.5 Print Date 05/31/2008 REVISION DATE: 04/21/2008

: TREMGLAZE POLYURETHANE CLEANER (12 OZ/CAN)12 AERO CANS/CS

CRYSTAL CLEAR VOC - 5 GL Version 1. Print Date 04/21/2011 REVISION DATE: 03/30/2009

Version 3.0 Print Date 12/23/2013 REVISION DATE: 07/08/2012

VULKEM 950 NF GRAY KIT Version 1.1 Print Date 09/11/2006 REVISION DATE: 09/01/2006

RAMUC THINNER 1 GAL Version 1 Print Date 10/24/2005 REVISION DATE: 06/30/2005

VULKEM 801 GRAY 5 GAL Version 2. Print Date 11/01/2008 REVISION DATE: 10/31/2008

DURATREM EP PART A CURING AGENT Version 1.1 Print Date 10/11/2006 REVISION DATE: 09/01/2006

: VULKEM 351 GRAY 5 US GAL/18.9 L

: EXOAIR FLEX LEF FOAM SEALANT

: VULKEM 345 CATALYST QUART

DIAMOND CLEAR GAL PAIL Version 1. Print Date 04/25/2011 REVISION DATE: 04/08/2011

EUCO QWIKJOINT 200 CARTRIDGES Version 2.0 Print Date 12/27/2013 REVISION DATE: 07/08/2012

EUCO QWIKJOINT 200 CARTRIDGES- 12/22 oz Version 1.1 Print Date 07/12/2007 REVISION DATE: 02/22/2007

EUCO # 452 EPOXY SYSTEM LV Version 1 Print Date 10/22/2008 REVISION DATE: 06/13/2005

FLEXOLITH 1:1 Version 3.0 Print Date 12/05/2013 REVISION DATE: 07/08/2012

GEOFLEX WELDING SOLVENT 5 GL Version 2. Print Date 07/07/2009 REVISION DATE: 06/29/2009

CONCRETE SURFACE RETARDER F Version 2. Print Date 08/08/2008 REVISION DATE: 08/07/2008

Dymeric 240 FC Version 3. Print Date 12/22/2011 REVISION DATE: 12/20/2011

DURAL 50 LM 2:1 PART B Version 1.1 Print Date 05/28/2008 REVISION DATE: 03/20/2008

CORR-BOND - 3-1/2 GALLON UNIT** Version 1 Print Date 07/12/2007 REVISION DATE: 05/24/2005

DURALBOND Version 3.0 Print Date 12/05/2013 REVISION DATE: 07/08/2012

PRIMER #1 Version 1.2 Print Date 12/05/2007 REVISION DATE: 09/01/2006

DURALCRETE-LV B Version 1. Print Date 07/13/2007 REVISION DATE: 06/08/2007

DURALPREP AC Version 3.0 Print Date 12/23/2013 REVISION DATE: 07/08/2012

DECKTITE 230 SL 4.9L of base, 2x.25L of c/a Version 2.0 Print Date 04/15/2014 REVISION DATE: 07/08/2012

: N THINNER 1 GL

EUCO # 452 EPOXY SYSTEM LV Version 4.0 Print Date 04/29/2015 REVISION DATE: 06/12/2013

Transcription:

Chemical Name: Vulkem 116 Polyurethane Sealant Manufacturer: Tremco Container size: 10.1oz. Location: VLA Disposal: Place empty container in trash.

SECTION 1 - PRODUCT IDENTIFICATION Trade name : Product code : 426802 323 COMPANY : Tremco Incorporated 3735 Green Road Cleveland, OH 44122 Telephone : (216) 292-5000 8:30-5:00 EST Emergency Phone: : (216) 765-6727 8:30-5:00 EST After Hours: Chemtrec 1-800-424-9300 Product use : Sealant SECTION 2 - HAZARDS IDENTIFICATION Emergency Overview Black. Non-sag gunnable paste. May cause slight irritation to the respiratory system. May cause nausea, headaches, and dizziness. May cause drowsiness, weakness, and fatigue. May cause allergic respiratory sensitization. Leave area to breathe fresh air. Avoid further overexposure. If symptoms persist, get medical attention. Move to fresh air. If required, artificial respiration or administration of oxygen can be performed by trained personnel. Acute Potential Health Effects/ Routes of Entry Inhalation : May cause slight irritation to the respiratory system. May cause nausea, headaches, and dizziness. May cause drowsiness, weakness, and fatigue. May cause allergic respiratory sensitization. Eyes : Direct contact may cause mild irritation. Ingestion : May cause gastrointestinal irritation, nausea, and vomiting. Skin : May cause sensitization resulting in irritation, itching and redness. Aggravated Medical Conditions Pre-existing eye, skin and respiratory disorders may be aggravated by exposure. Chronic Health Effects Overexposure may cause dermatitis, asthma, skin and respiratory sensitization and decreased lung function. Prolonged or repeated contact/exposure to aromatic petroleum distillates may cause defatting, drying, and irritation of the skin, dermatitis, and central nervous system (CNS) effects. Carbon black is classified by IARC to be a known animal carcinogen and a possible human carcinogen (Group 2B). Carbon black is encapsulated by resin and not expected to have adverse effects unless made airborne. Inhalation of crystalline silica (quartz) can cause cancer based on animal data, and IARC concludes sufficient evidence in humans (Group 1). Prolonged and repeated overexposure to free crystalline silica dust above the TLV level may cause scarring of the lungs with cough and shortness of breath. A delayed lung injury, silicosis may result from breathing free silica. Fillers are encapsulated and not expected to be released from product under normal conditions of use. Prolonged or repeated exposure to mineral spirits (petroleum naphtha or stoddard solvent) may cause defatting, drying, and irritation of the skin, dermatitis, central nervous system (CNS) effects, and adverse liver, kidney, and lung effects. Target Organs: Skin, Eye, Ingestion, Lung 1/6 426802 323

SECTION 3 - PRODUCT COMPOSITION Chemical Name CAS-No. Weight % Aromatic Polyisocyanate Resin NJ TSRN# 51721300-5270P 30.0-60.0 Diisodecyl phthalate 26761-40-0 15.0-40.0 Calcium Carbonate (Limestone) 1317-65-3 10.0-30.0 Tackifier NJ TSRN# 51721300-5272P 5.0-10.0 Thickener NJ TSRN# 51721300-5300P 3.0-7.0 Inert filler NJ TSRN# 51721300-5128P 3.0-7.0 1.0-5.0 Crystalline Silica (Quartz)/ Silica Sand 14808-60-7 - <1.0 SECTION 4 - FIRST AID MEASURES Get immediate medical attention for any significant overexposure. Inhalation : Leave area to breathe fresh air. Avoid further overexposure. If symptoms persist, get medical attention.move to fresh air. If required, artificial respiration or administration of oxygen can be performed by trained personnel. Eye contact : Flush with water for at least 15 minutes while holding eye lids apart. Get medical attention immediately. Skin contact : Clean area of contact thoroughly using soap and water. If irritation, rash or other disorders develop, get medical attention immediately. Ingestion : Do not induce vomiting unless advised by a physician. Call nearest Poison Control Center or Physician immediately. SECTION 5 - FIRE FIGHTING MEASURES Flash point : 150 F, 66 C Method : Tag Closed Cup Lower explosion limit : 0.60 %(V) Solvent Upper explosion limit : 7 %(V) Solvent Autoignition temperature Extinguishing media : If water fog is ineffective, use carbon dioxide, dry chemical or foam. Hazardous combustion products Protective equipment for firefighters : Carbon monoxide and carbon dioxide can form.hydrocyanic acid and nitrogen oxides can form. : Use accepted fire fighting techniques. Wear full firefighting protective clothing, including self-contained breathing apparatus (SCBA). SECTION 6 - ACCIDENTAL RELEASE MEASURES Use appropriate protective equipment. Avoid contact with material. Scrape up and transfer to appropriate container for disposal. 2/6 426802 323

SECTION 7 - HANDLING AND STORAGE Prevent inhalation of vapor, ingestion and contact with skin, eyes and clothing. Preferably use entire contents in one continuous work session. Do not smoke, weld, generate sparks, or use flame near container. Change soiled work clothes frequently. Clean hands thoroughly after handling Do not store or use near food. Keep container closed when not in use. Since emptied containers retain product residue and vapor, observe precautions even after container is emptied. Store under dry warehouse conditions away from heat and all ignition sources. SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION Personal protection equipment Respiratory protection : Wear appropriate, properly fitted NIOSH/MSHA approved organic vapor or supplied air respirator when airborne contaminant level(s) are expected to exceed exposure limits indicated on the MSDS. Follow manufacturer's directions for respirator use. Hand protection : Use suitable impervious nitrile or neoprene gloves and protective apparel to reduce exposure. Eye protection : Wear appropriate eye protection.use safety glasses if eye contact is likely. Skin and body protection : Use disposable or impervious clothing if work clothing contamination is likely. Remove and wash contaminated clothing before reuse. Protective measures : Use professional judgment in the selection, care, and use. Engineering measures : Use general ventilation and/ or local exhaust to reduce the airborne contaminant concentration below the exposure limit listed in the MSDS Exposure Limits Chemical Name CAS Number Regulation Limit Form Calcium Carbonate 1317-65-3 OSHA PEL: 5 mg/m3 Respirable fraction. (Limestone) OSHA PEL: 15 mg/m3 Total dust. ACGIH TWA: 3 mg/m3 Respirable particles. ACGIH TWA: 10 mg/m3 Inhalable particles. OSHA TWA: 15 mg/m3 Total dust. OSHA TWA: 5 mg/m3 Respirable fraction. Inert filler NJ TSRN# 51721300-5128P ACGIH TWA: 3 mg/m3 Respirable particles. ACGIH TWA: 10 mg/m3 Inhalable particles. OSHA PEL: 15 mg/m3 Total dust. OSHA PEL: 5 mg/m3 Respirable fraction. OSHA TWA: 15 mg/m3 Total dust. OSHA TWA: 5 mg/m3 Respirable fraction. ACGIH TWA: 3.5 mg/m3 OSHA PEL: 3.5 mg/m3 OSHA TWA: 15 mg/m3 Total dust. OSHA TWA: 5 mg/m3 Respirable fraction. 3/6 426802 323

Chemical Name CAS Number Regulation Limit Form Crystalline Silica (Quartz)/ 14808-60-7 ACGIH TWA: 0.05 mg/m3 Respirable fraction. Silica Sand OSHA TWA: 0.1 mg/m3 Respirable. OSHA TWA: 0.3 mg/m3 Total dust. OSHA PEL: 15 mg/m3 Total dust. OSHA PEL: 5 mg/m3 Respirable fraction. SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES Form : Non-sag gunnable paste Color : Black Odor : PetroleumSolvent ph Vapour pressure Vapor density : Heavier than air Melting point/range Freezing point Boiling point/range : 280 F, 138 C Water solubility : Insoluble Specific Gravity : 1.1344 % Volatile Weight : 7 % SECTION 10 - REACTIVITY / STABILITY Substances to avoid Stability Hazardous polymerization : Amines.Water or moisture and oxidizing agents.alcohols.strong acids.strong bases. : Material is stable under normal storage, handling, and use. : Will not occur. SECTION 11 - TOXICOLOGICAL INFORMATION No Data Available SECTION 12 - ECOLOGICAL INFORMATION No Data Available SECTION 13 - DISPOSAL CONSIDERATIONS Disposal Method : Waste not regulated under RCRA. Incinerate at EPA approved facility or dispose of waste in compliance with state and local regulations. 4/6 426802 323

SECTION 14 - TRANSPORTATION / SHIPPING DATA TDG / DOT Shipping Description: NOT REGULATED SECTION 15 - REGULATORY INFORMATION North American Inventories: All components are listed or exempt from the TSCA inventory. This product or its components are listed on, or exempt from the Canadian Domestic Substances List. U.S. Federal Regulations: SARA 313 Components : None present or none present in regulated quantities. SARA 311/312 Hazards : Acute Health Hazard Chronic Health Hazard Fire Hazard OSHA Hazardous Components : Calcium Carbonate (Limestone) 1317-65-3 Inert filler NJ TSRN# 51721300-5128P Crystalline Silica (Quartz)/ Silica Sand 14808-60-7 OSHA Status: Considered hazardous based on the following criteria: : Irritant Sensitizer Carcinogen OSHA Flammability : IIIA Regulatory VOC (less water and exempt solvent) : 80 g/l VOC Method 310 : 2 % Chemical is listed as an IARC, NTP, OSHA, or ACGIH Carcinogen: Crystalline Silica (Quartz)/ Silica Sand 14808-60-7 U.S. State Regulations: MASS RTK Components : Calcium Carbonate (Limestone) 1317-65-3 Penn RTK Components : Aromatic Polyisocyanate Resin NJ TSRN# 51721300-5270P Diisodecyl phthalate 26761-40-0 Calcium Carbonate (Limestone) 1317-65-3 Tackifier NJ TSRN# 51721300-5272P Thickener NJ TSRN# 51721300-5300P Inert filler NJ TSRN# 51721300-5128P 5/6 426802 323

NJ RTK Components : Aromatic Polyisocyanate Resin NJ TSRN# 51721300-5270P Diisodecyl phthalate 26761-40-0 Calcium Carbonate (Limestone) 1317-65-3 Tackifier NJ TSRN# 51721300-5272P Thickener NJ TSRN# 51721300-5300P Crystalline Silica (Quartz)/ Silica Sand 14808-60-7 Chemicals known to the State of California to cause cancer birth defects and/or other reproductive harm: 1333-86-4 Carbon Black 14808-60-7 Crystalline Silica (Quartz)/ Silica Sand 91-08-7 Toluene-2,6-Diisocyanate 584-84-9 2,4-Toluene diisocyanate 91-20-3 Naphthalene SECTION 16 - OTHER INFORMATION HMIS Rating : Health 2 0 = Minimum Flammability 2 1 = Slight Reactivity 0 2 = Moderate PPE 3 = Serious 4 = Severe Further information: For Industrial Use Only. Keep out of Reach of Children. The hazard information herein is offered solely for the consideration of the user, subject to their own investigation of compliance with applicable regulations, including the safe use of the product under every foreseeable condition. Prepared by: Rich Mikol Legend ACGIH - American Conference of Governmental Hygienists CERCLA - Comprehensive Environmental Response, Compensation, and Liability Act DOT - Department of Transportation DSL - Domestic Substance List EPA - Environmental Protection Agency HMIS - Hazardous Materials Information System IARC - International Agency for Research on Cancer MSHA - Mine Safety Health Administration NDSL - Non-Domestic Substance List NIOSH - National Institute for Occupational Safety and Health NTP - National Toxicology Program OSHA - Occupational Safety and Health Administration PEL - Permissible Exposure Limit RCRA - Resource Conservation and Recovery Act RTK - Right To Know SARA - Superfund Amendments and Reauthorization Act STEL - Short Term Exposure Limit TLV - Threshold Limit Value TSCA - Toxic Substances Control Act TWA - Time Weighted Average V - Volume VOC - Volatile Organic Compound WHMIS - Workplace Hazardous Materials Information System 6/6 426802 323