M onnectors and Fittings xtended Type Hose ouplings for Vapor and Liquid Service 7571 and 7575 Series esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited travel of the handle on the tailpiece minimizes spin-off, encouraging cautious removal to properly bleed off trapped product to assure closure of the filler valve and hose end valve. The M threads are machined on a rugged steel insert which is permanently cast in the aluminum handle, providing for durability under repeated use. RGO PROUTS YR WRRNTY 7571 Series 7575 Series Number Type of Service. Hose onnection (M. NPT) RG 7575L2* RG 7575L3 Liquid RG 7575L4 1 RG 7575L5** RG 7571L Vapor RG 7571L * Includes 7199-33 adapter, shipped loose. ** Includes 7575L5-1 adapter, shipped loose.. oupling onnection (F. M) 1. pprox. 7 algary H&F:
YR WRRNTY YR WRRNTY Short Type Hose ouplings for Vapor and Liquid Service 3171, 3175, 3181, 3185 and 3195 Series RGO PROUTS 3175 Series Style For Liquid Filling 3185 Series Style For Liquid Filling 3171 Series Style For Vapor qualizing 3191 Series Style For Vapor qualizing Number Style. Hose onnection (M. NPT). oupling onnection (F. M). Tailpiece ore. Hose nd To Nut RG 3175 35 64 RG 3175 1 2 2 7 /8 rass RG 3175 1 RG 3185 2¼ 1 3 16 2 1 16 3 1 /8 RG 3195 rass Nut & Steel Nipple 2 3¼ 1 13 16 2 1 /8 3 5 /8 RG 3175 1 2 2 7 /8 RG 3175 1 Steel RG 3185 2¼ 1 3 16 2 1 /8 3 1 /8 RG 3195 2 3¼ 1 13 16 2 1 /8 3 5 /8 RG 3171 3 /8 13 32 1 3 16 2 7 16 RG 3171 17 32 RG 3181 rass 11 16 2 3¼ 1 15 RG 3181 1 16 1 7 /8 3 1 /8 RG 3191 2¼ 3 16 2 1 /8 3 5 16. Overall M heck onnectors for Lift Trucks 7141F and 7141M These brass connectors are especially designed to join the carburetor fuel line to the service valve on lift truck cylinders. Sturdy, long lasting M threads allow quick, hand-tight assembly that provides for quick and simple cylinder replacement. ack checks automatically close in each connector when disconnected. The 7141M couples directly to the service valve. n integral O-ring is designed to seal before the internal check opens, aiding in product loss prevention. gasket at the M thread is a secondary seal when the connectors are tightened together. The connector fits RegO lift truck cylinder filling adapters for fast, convenient filling. The 7141F accepts fuel line adapter and couples directly to the 7141M. The O-ring seal in the 7141M is designed to seal before the internal check opens to allow product to pass through the connection. The knurled coupling eases threading and the M threads provide rapid effortless make-up, even against LP-Gas pressure. NOT: Refer to the ylinder and Service Valves section of the L-500 catalog for additional information. 7141M RGO PROUTS 7141F pplication. Inlet. Outlet Rubber Protective ap* RG 7141M Service Valve 3 /8 F. NPT M. M RG 7141M-40 RG 7141FP RG 7141F Fuel Line F. M ¼ F. NPT - - * Recommended to minimize foreign material entering valves which could result in leakage. rass algary H&F:11
YR WRRNTY YR WRRNTY Unloading dapters for ontainer vacuation 3119, 3120 and 3121 esigned to provide an efficient means of evacuating an LP-Gas container for relocation or repair. They thread directly onto the 13 4 M male hose connection of RegO Filler Valves used on RegO ouble heck Filler Valves and Multivalves. The unloading adapters can be used to withdraw liquid provided the container is equipped with a dip pipe extending from the filler valve to the bottom of the container. 3120 3119 3121 RGO PROUTS YR WRRNTY Style. Filler Valve onnection. Hose onnection RG 3119 In-Line 1 M. M RG 3120 1 F. M ngle RG 3121 F. NPT Filler Hose dapters 3179 and 7577V These adapters are designed with minimal flow restriction and recommended for use on the outlet of the LP-Gas delivery truck filler hose. If the controlled bleed off of the connection indicates the filler valve on the tank being filled has failed to close, the hose adapter should be left in place on the filler valve and disconnection should be made at the regular filler hose coupling. (Repair of the filler valve must be made as soon as possible). n integral check valve in these adapters helps prevent further loss of product. The standard filler valve cap should be attached to these adapters when left on the container. RG 7577V RG 3179 uilt-in Vent Valve Yes No Filler Valve onnection Hose onnection 1 F. M 1 M. M 3179 7577V M Plugs Specifically designed to withstand the everyday abuse given hose end valves on delivery trucks and hose end couplings on risers in bulk plants. These rugged plugs protect the coupling tip as well as prevent the entrance of dirt, dust, snow and rain. They also prevent possible gas contamination from these same sources. The heavily ribbed outer surface permits hand-tight make-up. These plugs are available in a choice of four sizes which may be used with liquid as well as vapor type couplings. s a convenience, the nylon plugs have a retaining chain and ring to prevent loss during a transfer operation. ll are suitable for LPG or anhydrous ammonia service except the brass 5765PR, which is for LP-Gas only. Not intended for use as pressure closures. POL Plugs Highly recommended for installation in LP-Gas cylinder valve POL outlets whenever the service line is disconnected or when the cylinder is being transported. When properly installed, the POL plug is designed to prevent contamination of the valve outlet and guards against product leakage if the cylinder valve is accidentally opened. RGO PROUTS 5763N (M. M) hain & Ring Fits Pipe Size Up To: RG 5763N Nylon RG 5765N 1 RG 5765PR rass Not pplicable RG 5767N 2¼ Nylon RG 5769N 3¼ 2 RGO PROUTS Number onnection RG N970P RG 538P RG 3705R ycolac rass M. POL (G 5) N970P 538P (Has hole for attaching wire to prevent loss of plug) algary H&F:12
aps and Reducers * Reduces to 1 3 4 M. M ap With hain & Ring Number 3144-91 Plastic ap Ring Fits Pipe Size Up To: ap Only Number Thread onnection RG 3144-91 RG 3144-9P F. M RG 3174-91 ycolac RG 3174-9P RG 3174-93 1 F. M RG 8016-93 RG 8016-9P Nylon RG 1708 F. POL (G 5) RG 7141FP F. M - RG 3175P 1 F. M rass RG 3184-90 2 2¼ F. M RG 3194-90 3 RG 3194-9 3¼ F. M - - RG 5776* RG 3184-90 2 2¼ F. M - RG 3194-90 3 Steel 3¼ F. M - - RG 5776* RG 907FP 1 - rass 1 15 /16 F. M 3194-90 rass ap 5776 Reducer oupling 7141FP ap Plug 907FP R G O 9 0 7 F P M Spanner Wrench This aluminum spanner wrench is especially designed for use with 2 1 4 and 3 1 4 M couplings, adapters and caps. 3175P rass M ap 1708 POL ap Number For Use With M onnector Size RG 3195-50 2¼ & 3¼ Hose nd Valve dapter 7576 No gas flow is allowed when this adapter is not connected to the 1 M connection of a filler valve, it also acts as a back check. Vent Valve Filler onnection Hose nd Valve onnection Propane Liquid apacity @ 80 PSI RG 7576 Yes 1 F. M 1 M. M 57 GPM 7576 algary H&F:13
YR WRRNTY M dapters Male M x Female NPT M. M MNPT Overall iameter No. RG 5764 ¼ 1 RG 5764 3 /8 RG 5764 1 1 RG 2697-20R RG 5764 1 7 /8 RG 5764 1 rass RG 5766 1 2¼ 2¼ 2 5 /16 1 3 /8 RG 3184-8R RG 5766F RG 5768G 1 RG 5768H 3¼ 2 3 3 5 /8 2 1 /8 RG 3194-8R RG 5768J 2 RG 5764 1 RG 5764 Steel 1 1 2 3 /16 RG 2697-20R RG 5768H 3¼ 2 3¼ 3¼ 1 13 /16 RG 3194-8R Male M x Male NPT Gasket (Furnished with adapter) M x Female NPT RGO PROUTS M. M F. NPT Overall iameter No. RG 5763 1 7 /16 RG 2797-20R RG 5765 1 7 /8 11 /16 RG 5765 1 1 1 RG 2697-20R 2 1 /8 RG 5765F RG 5767F 1 3 /16 rass 2¼ 2 5 /16 RG 5767G 2¼ 1 1 3 /8 RG 3184-8R RG 5767H 2 2 3 /8 2 7 /16 1 25 /64 RG 5769H 2 3 3 /8 2 7 /8 1 7 /8 RG 5769J 3¼ 2 3¼ 3 RG 3194-8R RG 5769K 3 3 3 5 /8 2 1 /8 RG 5765 17 /32 11 RG 5765 /16 1 1 2 3 /16 RG 5765 1 7 /8 RG 2697-20R RG 5765F Steel 15 /16 RG 5767F 2¼ 2¼ 2 3 /8 1 3 /16 RG 3184-8R RG 5769H 2 2 7 /8 1 7 /8 3¼ 3¼ RG 5769K 3 3 13 /16 2 7 /8 RG 3194-8R Male M oupling Gasket (Furnished with adapter) M x Male NPT M. M F. NPT iameter No. RG 5765M 1 1 2 1 /16 7 /8 RG 2697-20R RG 5767M rass 2¼ 2¼ 2 5 /16 1 25 /64 RG 3184-8R RG 5769M 3¼ 3¼ 2 2 1 /8 RG 3194-8R Gasket (Furnished with adapter) Male M Parking Plug M x M * 3 8-16 UN Thread. M. M F. NPT iameter No. RG 5764W Steel 1 3 /8 * 1 RG 2697-20 M x Miscellaneous (Recommended for securing hose-end valve when not in use). algary H&F:14
M daptors ual Male and Female NPT escription M 502-12/8 2 1 /4 M.M X 1 1 /2 MNPT X 1 FNPT M 502-16/ 2 1 /4 M.M X 2 MNPT X 1 1 /4 FNPT M 502-16/12 2 1 /4 M.M X 2 MNPT X 1 1 /2 FNPT M 502S-16/12 2 1 /4 M.M X 2 MNPT X 1 1 /4 FNPT Steel M daptors Male X Female NPT escription M 250 3 1 /4 M.M X 1 1 /4 FNPT M 508-24 3 1 /4 M.M X 3 FNPT M ouplings Steel Male X Male escription M 273S 1 3 /4 M.M X 1 3 /4 M.M M 275S 2 1 /4 M.M X 2 1 /4 M.M M 277S 3 1 /4 M.M X 3 1 /4 M.M M Unloading dapters M 611 RG 5776 M 442 Steel Unloading dapters M 611S RG 5776 M 442S escription 2 1 /4 F.M X 1 3 /4 M.M 3 1 /4 F.M X 1 3 /4 M.M 3 1 /4 F.M X 1 1 /4 FNPT 2 1 /4 F.M X 1 3 /4 M.M 3 1 /4 F.M X 1 3 /4 M.M 3 1 /4 F.M X 1 1 /4 FNPT G 555 Swivel daptors & aps Number RG 12982 RG 12982G rass ¼ M. NPT 9 /16-18NF rill 3 /16 1 15 /16 RG 5776 M 442 M 611 G 555 ap M 309-1 G 555 Gauge dapters and Test Port Fittings 2 3 16 Pressure Gauge dapter 1 1 4. RG 1494-1 rass F. NPT ¼ F. NPT M. NPT F Number F RG 1328 5 /8-18 UNF 5 /8-18 UNF ¼ 13 /16 2 1 RG 1331 rass - 16 UNF - 16 UNF Hose 15 /16 2 1 /8 RG 1332 7 /8-14 UNF 7 /8-14 UNF arb 1 1 /16 2 1 algary H&F:15
YR WRRNTY YR WRRNTY YR WRRNTY YR WRRNTY Hose nd dapters for OT ylinder Filling 7193- and 7193U- esigned to provide quick and easy filling of OT cylinders with POL or Type I connections. This adapter may be used with hydraulic and electric automatic systems or with manual systems in conjunction with a RegO 7901T Quick cting Shut-Off Valve. RGO PROUTS These filling connectors have an extended connection on the handwheel, which makes it possible to connect the loading hose to valves on cylinders with fixed collars. The handwheel is well outside the collar for easy operation. 7193-7193U- pplications Inlet onnection Outlet onnection s RG 7193- Filling of OT ylinders with POL onnections M. POL (G 5) rass & Stainless Steel ¼ M. NPT RG 7193U- Filling of OT ylinders with Type I onnections Type 1 onnection (1 M. M) rass onnector for OT ylinder Filling dapter 7193T- The 7193T- onnector is designed for use on the 7193- Filling dapters. onnector allows quick connection to the Type I 15 16 M. M threads for operators that fill both POL and Type I valves. RGO PROUTS pplications Inlet onnection Outlet onnection s RG 7193T- onverts 7193- dapters from POL to a Type 1 onnection M. POL G 5 Type 1 onnection (1 5 16 M. M) rass Hose nd dapter for Lift Truck ylinder Filling 7193L- The 7193L- is designed to provide quick and easy attachment of the filling hose to OT cylinders equipped with RegO 7141M check connectors. 7193L- ody ccessories pplication Inlet onnection Outlet onnection dapter RG 7193L- Filling of Fork Lift ylinders* ¼ M. NPT F. M rass 5760 * The 7193L- is intended to be permanently attached to the filling hose. 5760 adapter enables the 7193L- to be attached to the POL connection on the 7193- at regulator cylinder filling stations to allow for occasional filling of fork lift cylinders. Lever Operated Hose nd dapter for Fork Lift ylinder Filling 7193K- esigned to drastically reduce labor and time when continuously filling large numbers of lift truck cylinders equipped with RegO 7141M check connectors. RGO PROUTS Rapid make-up is accomplished by simply slipping the adapter yoke behind the hex wrenching section of the 7141M connector and depressing the lever. When the cylinder is filled, the adapter is easily disengaged by releasing the operating lever. When connected, back checks in the adapter and connector automatically open. n integral check closes when disconnected, eliminating the need to close any valves manually on the filling manifold to disconnect the charging hose. The shut-off valve on the container must be closed after filling. RGO PROUTS 1 4 NPT 7193K- Quick isconnect Yoke ecause a leak-tight seal is formed before the checks close, product loss is kept to an absolute minimum when connecting or disconnecting the loading hose. The 7193K- is intended to be permanently attached to the filling hose. 18 1 4 pprox. pplication Inlet onnection Outlet onnection s RG 7193K- Lever Operated for Quick Filling of Fork Lift ylinders ¼ F. NPT Quick isconnect Yoke* rass and Steel * For use with RegO 7141M check connector. algary H&F:16