MATERIAL SAFETY DATA SHEET

Similar documents
MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

AQ 191 A Page 1 of 5 Sika Canada Inc. MATERIAL SAFETY DATA SHEET Date:99/09/30 App S.G.

AQ 191 A Page 1 of 5 Sika Canada Inc. MATERIAL SAFETY DATA SHEET Date: 99/09/30 App S.G.

AQ 191 A Page 1 of 5 Sika Canada Inc. MATERIAL SAFETY DATA SHEET Date:99/09/30 App S.G.

MATERIAL SAFETY DATA SHEET

INACTIVE - MOBIL 1 0W-40

COPPER REAGENT #2. Section 1: PRODUCT INFORMATION. Section 2: HAZARDOUS INGREDIENTS

CALCIUM INDICATOR LIQUID

MATERIAL SAFETY DATA SHEET PRODUCT : BOMIX CONSTRUCTION SAND

DPD REAGENT #3. Section 1: PRODUCT INFORMATION. Section 2: HAZARDOUS INGREDIENTS

TOTAL HARDNESS REAGENT

TOTAL HARDNESS REAGENT

Material Safety Data Sheet

Material Safety Data Sheet

PINK LIQUID HAND SOAP

LUMINOX. Section 1 : PRODUCT AND COMPANY IDENTIFICATION

CALCIUM INDICATOR LIQUID

Material Safety Data Sheet

DIAMOND KOTE LEATHER/VINYL RESTORER 118,6118

DPD REAGENT #2. Section 1: PRODUCT INFORMATION. Section 2: HAZARDOUS INGREDIENTS

SULFURIC ACID.24N. Section 1: PRODUCT INFORMATION

ACID DEMAND REAGENT (ADR)

LIQUID HARDENER (MEKP)

M A T E R I A L S A F E T Y D A T A

LABTONE MSDS. Section 1 : PRODUCT AND COMPANY IDENTIFICATION

BESSEY SPATTER RELEASE SOLVENT BASED

Material Safety Data Sheet. Propylene Glycol 38% Section 1: PRODUCT INFORMATION. Manufacturer: Various Manufacturers. Section 2: HAZARDOUS INGREDIENTS

BASE DEMAND REAGENT (BDR)

TECH TIRE AND TUBE COMPOUND (INCL. LITE)

Material Safety Data Sheet

40 40A WHITE AND PASTEL TINTS

20 20A WHITE AND PASTEL TINTS

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET TRAXIT % CAS# EXPOSURE LEVELS LD (50), ROUTE, SPECIES

ALCONOX - Powdered Precision Cleaner: LIQUINOX - Critical Cleaning Liquid Detergent:

Material Safety Data Sheet

LIQUINOX MSDS. Section 1 : PRODUCT AND COMPANY IDENTIFICATION. Section 2 : INGREDIENT INFORMATION. Ingredient Name T.L.V.

Material Safety Data Sheet

14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK H20E, Part A BILLERICA, MA 01821

Material Safety Data Sheet Benzaldehyde MSDS

Elastochem Specialty Chemicals Inc. Material Safety Data Sheet Elastochem-1100 foam Part A Page 1 of 4

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

Material Safety Data Sheet

SOLVENT BASED ANTI SPLATTER (AEROSOL)

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

BUBBLEGUM LIQUID RELEASE

Material Safety Data Sheet

NAME: CINNAMON OIL SDS NO. 1937

MATERIAL SAFETY DATA SHEET

Ingredient CAS Number Weight % ACGIH TLV PEL STEL Sodium Carbonate mg/m3 15 mg/m3

SAFETY DATA SHEET SECTION 1 - IDENTIFICATION

MATERIAL SAFETY DATA SHEET

Bloomco/Division of Double B MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

Material Safety Data Sheet

SECURITY COAT. Section 1 : PRODUCT AND COMPANY IDENTIFICATION. Section 2 : INGREDIENT INFORMATION

Rust Check Corporation Rust Inhibitor MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet

* HMIS CODE ratings are estimated by Epoxy Technology. II. HAZARDOUS INGREDIENTS CAS# WT % TOXICITY DATA

Material Safety Data Sheet

ALVIN LAB METAL. Section 1: PRODUCT INFORMATION. Product uses: Metal patching compound. Chemtrec (24h).

Material Safety Data Sheet

14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK H74 UNF, Part A BILLERICA, MA 01821

NYOGEL 781D. Product: 781D Revision Date: 2003/03/26. Section 1 : PRODUCT AND COMPANY IDENTIFICATION

SAFETY DATA SHEET NUTRA BRITE

MATERIAL SAFETY DATA SHEET

7031 SW 22 Court, Davie, FL (866) 637-ROOF (7663) Fax: (941) Final Flat Roof MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

Safety Data Sheet 1818BR

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET. Revision Number: 3

Aerosol Portion: faster than butyl acetate;immediate at temperatures above -35 C. Liquid Portion: slower than butyl acetate.

Material Safety Data Sheet

Carcinogen: NTP (No) IARC (No) OSHA (No) DATE REVISED: 09/23/2002 REV: B * HMIS CODE ratings are estimated by Epoxy Technology.

SCALE KLEEN 1. PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDS IDENTIFICATION

Product and Company Identification. Composition/Information on Ingredients. Hazards Identification. 1

Material Safety Data Sheet Product No Colloidal Silica Suspension, 0.06µm

Material Safety Data Sheet

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

Tween-20 - ULTRA PURE

Material Safety Data Sheet Page 1 of 5

Material Safety Data Sheet

Material Safety Data Sheet

Safety Data Sheet EX - RAY

OSHA regulated. NE NE No No No. NE NE No No No

MATERIAL SAFETY DATA SHEET "W" TEST SOLUTION NFPA HAZARD RATINGS* 2 Moderate health hazard 3 Highly flammable SECTION 1: PRODUCT INFORMATION

( o r a l r a t ) P a ge 1 o f 5

: Cleaners, liquids (all purpose cleaners, sanitary products, floor cleaners, glass cleaners, carpet cleaners, metal cleaners)

Carcinogen: NTP (No) IARC (No) OSHA (No) DATE REVISED: 6/5/01 REV: A * HMIS CODE ratings are estimated by Epoxy Technology.

Household, Institutional and Industrial Disinfectant Supplier Identification:

: Focus LD 121 Laundry Detergent

Material Safety Data Sheet

Transcription:

Page 1 of 5 SECTION I: PRODUCT INFORMATION PRODUCT: Sikadur XL Gel PART A REVISION DATE: February 1 st, 2015 USAGE: High Gel Epoxy MANUFACTURER/SUPPLIER: SIKA CANADA INC. 601, avenue Delmar Pointe Claire, QC H9R 4A9 EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666 TDG CLASSIFICATION: t regulated WHMIS Classification: D2B UN NUMBER: t applicable Class: t applicable Packaging Group: t applicable SECTION II: HAZARDOUS INGREDIENTS Hazardous ingredients % T.L.V. # CAS LD 50 (mg/kg) (species, route) LC 50 (species, route) EPOXY RESIN 60-100 NOT AVAILABLE 25085-99-8 > 5000 (rat, oral) NOT AVAILABLE ALIPHATIC GLYCIDYL ETHER 10-30 NOT AVAILABLE 2461-15-6 7800 rat, oral) NOT AVAILABLE FUMED AMORPHOUS SILICA 5-10 ACGIH TWA 10 ppm 112945-52-5 NOT AVAILABLE NOT AVAILABLE SECTION III: PHYSICAL CHARACTERISTICS Physical State: Appearance and Odor: Odor Threshold: Evaporation Rate: Vapor Density: Vapor Pressure: Liquid White, epoxy Boiling Point: 146 C Freezing Point: Density: 1.15 g/ml Water Solubility: Slight ph: % volatility by volume: 0.00 Water/Oil Distribution:

Page 2 of 5 PRODUCT: Sikadur XL Gel PART A SECTION IV: FIRE AND EXPLOSION HAZARDS Flammability: If Yes, under what conditions: Extinguishing methods: Water fog, CO 2, dry chemical, foam TDG Flammability Class: t applicable Flammable upper limits (% vol.): t applicable Flammable lower limits (% vol.): t applicable Flash Point (setaflash closed cup): 177 C Auto-ignition temperature: t applicable Dangerous Combustion Products Carbon oxides, phenols Special Methods: Fire-fighters must wear complete protective clothing with respiratory equipment Protect from mechanical impact: Protect from static discharge: SECTION V: REACTIVITY DATA Chemical stability: If not, under what conditions: Stable Dangerous decomposition products: Carbon oxides, phenols Incompatibility with other material: If Yes, which ones: t known Polymerization Risks: May occur with greater than 1 lb (454 g) of amines

Page 3 of 5 PRODUCT: Sikadur XL Gel PART A SECTION VI: TOXICOLOGICAL PROPERTIES ROUTE OF ENTRY / CONTACT Will result in eye irritation Carcinogenicity: Skin: May cause dermatitis Toxic effects on reproduction: Inhalation: Will result in respiratory tract irritation Teratogenicity: Ingestion: May cause abdominal pain, vomiting and diarrhea Mutagenicity: This product can cause skin and respiratory sensitization Product with synergistic effects: t known An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory problems.

Page 4 of 5 PRODUCT: Sikadur XL Gel PART A SECTION VII: PREVENTIVE MEASURES PERSONAL PROTECTIVE EQUIPMENT OTHERS Gloves: Impervious gloves Ventilation: Use adequate ventilation Respiratory equipment: If respiratory respiration is required, use an approved air purifying respirator Shoes: Chemical goggles and full face shield Security shoes Procedure in case Of leaks: Remove all sources of ignition (flames, sparks, etc.). Provide adequate ventilation. Avoid prolonged breathing of vapors. Remove to a container or absorb with clay, diatomaceous earth or other suitable inert absorbent. Clothing: Other: Long sleeved, body covering and protective clothing Handling and Equipment Methods: Avoid inhalation, skin and eye contact. Wash repeatedly with soap and water during the workday. Warehouse Requirements: Keep all containers closed in a cool, dry and well ventilated area. Special Shipping Instructions: Waste Disposal: See TDG class. Dispose of residues according to municipal, provincial or federal laws for disposal of chemicals. Do not incinerate closed containers.

Page 5 of 5 PRODUCT: Sikadur XL Gel PART A SECTION VIII: FIRST AID Skin: Wash thoroughly with soap and water. If irritation persists, consult a physician Rinse eyes immediately with plenty of water for at least 15 minutes. See a physician immediately. Inhalation: Ingestion: Remove the affected person to fresh air. If breathing is difficult, administer oxygen. Consult a physician if required. Do not induce vomiting, administer large amounts of water or milk if available. Do not give anything by mouth to an unconscious person. Transport to a medical facility. SECTION IX: PREPARATION INFORMATION Prepared By: R & D of Sika Canada Inc. Telephone #: (514) 697-2610 Fax #: (514) 694-2792 tice To Reader The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material, product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's current Product Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone number listed in Section IX of this MSDS. SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY OTHERS. All sales of Sika products are subject to its current terms and conditions of sale available at www.sika.ca or 514-697-2610. AQ 191 A Date: 2012/02/01 App: S.G.

Page 1 of 5 SECTION I: PRODUCT INFORMATION PRODUCT: Sikadur XL Gel PART B REVISION DATE: February 1 st, 2015 USAGE: High Gel Epoxy MANUFACTURER/SUPPLIER: SIKA CANADA INC. 601, avenue Delmar Pointe Claire, QC H9R 4A9 EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666 TDG CLASSIFICATION: Polyamines, Liquid, Corrosive, N.O.S. WHMIS Classification: B3, D2B, E UN NUMBER: 2735 Class: 8 Packaging Group: II SECTION II: HAZARDOUS INGREDIENTS Hazardous ingredients % T.L.V. # CAS N-AMINOETHYL PIPERAZINE TRIETHANOLAMINE 10-30 LD 50 (mg/kg) (species, route) LC 50 (species, route) 10-30 NOT AVAILABLE 140-31-8 2110 (rat, oral) NOT AVAILABLE ACGIH TWA 5mg/m 3 102-71-6 9 110 (rat, oral) NOT AVAILABLE AMIDO-AMINE RESIN 10-30 NOT AVAILABLE 68991-84-4 NOT AVAILABLE NOT AVAILABLE DIETHYLENE TRIAMINE 10-30 ACGIH TWA 1 ppm 111-40-0 2330 (rat, oral) NOT AVAILABLE TRIETHYLENE TETRAMINE 10-30 NOT AVAILABLE 112-24-3 4 340 (rat, oral) NOT AVAILABLE NONYL PHENOL 7-13 NOT AVAILABLE 25154-52-3 580 (rat, oral) NOT AVAILABLE ALIPHATIC GLYCIDYL ETHER 5-10 NOT AVAILABLE 68609-97-2 17000 (rat, oral) NOT AVAILABLE BISPHENOL A 5-10 NOT AVAILABLE 80-05-7 4100 (rat, oral) NOT AVAILABLE FUMED AMORPHOUS SILICA 5-10 ACGIH TWA 10 ppm 112945-52-5 NOT AVAILABLE NOT AVAILABLE PIPERAZINE 3-7 NOT AVAILABLE 110-85-0 3800 (rat, oral) NOT AVAILABLE SECTION III: PHYSICAL CHARACTERISTICS Physical State: Appearance and Odor: Odor Threshold: Evaporation Rate: Vapor Density: Vapor Pressure: Liquid Clear amber, ammoniac Boiling Point: Freezing Point: Density: 1.03 g/ml Water Solubility: Slight ph: % volatility by volume: 0.00 Water/Oil Distribution:

Page 2 of 5 PRODUCT: Sikadur XL Gel PART B SECTION IV: FIRE AND EXPLOSION HAZARDS Flammability: If Yes, under what conditions: Extinguishing methods: Special Methods: Combustible But avoid Flames, sparks Water fog, CO 2, dry chemical, foam Fire-fighters must wear complete protective clothing with respiratory equipment TDG Flammability Class: t applicable Flammable upper limits (% vol.): t established Flammable lower limits (% vol.): t established Flash Point (setaflash closed cup): 90 C Auto-ignition temperature: t applicable Dangerous Combustion Products Carbon oxides, nitrogen oxides Protect from mechanical impact: Protect from static discharge: SECTION V: REACTIVITY DATA Chemical stability: If not, under what conditions: Yes Dangerous decomposition products: Carbon oxides, nitrogen oxides Incompatibility with other material: t known Polymerization Risks: If Yes, which ones:

Page 3 of 5 PRODUCT: Sikadur XL Gel PART B SECTION VI: TOXICOLOGICAL PROPERTIES ROUTE OF ENTRY / CONTACT Will result in severe eye irritation and burns Carcinogenicity: Skin: Will result in severe skin irritation and burns Toxic effects on reproduction: Inhalation: May result in severe respiratory tract irritation and burns Teratogenicity: Ingestion: May lead to gastro-intestinal irritation or ulceration Mutagenicity: Product with synergistic effects: t known This product can cause skin and respiratory sensitization. An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory problems.

Page 4 of 5 PRODUCT: Sikadur XL Gel PART B SECTION VII: PREVENTIVE MEASURES PERSONAL PROTECTIVE EQUIPMENT OTHERS Gloves: Impervious gloves Ventilation: Use adequate ventilation Respiratory equipment: If respiratory respiration is required, use an approved air purifying respirator Shoes: Chemical goggles and full face shield Security shoes Procedure in case Of leaks: Remove all sources of ignition (flames, sparks, etc.). Provide adequate ventilation. Avoid prolonged breathing of vapors. Remove to a container or absorb with clay, diatomaceous earth or other suitable inert absorbent. Clothing: Other: Long sleeved, body covering and protective clothing Handling and Equipment methods: Avoid inhalation, skin and eye contact. Wash repeatedly with soap and water during the workday. Warehouse Requirements: Keep all containers closed in a cool, dry and well ventilated area. Special Shipping Instructions: See TDG class. Waste Disposal: Dispose of residues according to municipal, provincial or federal laws for disposal of chemicals. Do not incinerate closed containers.

Page 5 of 5 PRODUCT: Sikadur XL Gel PART B SECTION VIII: FIRST AID Skin: Wash thoroughly with soap and water. If irritation persists, consult a physician Rinse eyes immediately with plenty of water for at least 15 minutes. See a physician immediately. Inhalation: Remove the affected person to fresh air. If breathing is difficult, administer oxygen. Consult a physician if required. Ingestion: Do not induce vomiting. Administer large amount of water or milk if available. Do not give anything by mouth to an unconscious person. Transport to a medical facility. SECTION IX: PREPARATION INFORMATION Prepared By: R & D of Sika Canada Inc. Telephone #: (514) 697-2610 Fax #: (514) 694-2792 tice To Reader The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material, product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's current Product Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone number listed in Section IX of this MSDS. SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY OTHERS. All sales of Sika products are subject to its current terms and conditions of sale available at www.sika.ca or 514-697-2610. AQ 191 A Date: 2012/02/01 App: S.G.