LARGE-SIZE POOL COVER SYSTEMS PAM-Abdecksysteme sind SENIOR CASING FOR PERFECT STAR / SENIOR OLYMPIA SPRINT
CONTENT LARGE-SIZE POOL COVER SYSTEMS SENIOR System description SENIOR mobile motor driven on guide rails SENIOR mobile freestanding SENIOR fixed installation Execution examples Page 3 Page 4 Page 8 Page 10 Page 14 Casing for PERFECT STAR / SENIOR System description Version A Version B Version C Version D Execution examples Page 16 Page 17 Page 21 Page 24 Page 28 Page 34 OLYMPIA System description System construction Execution examples Page 36 Page 37 Page 39 SPRINT System description System construction Page 44 Page 45 Further installations Page 47 Oeconform stands for products that guarantee remarkable energy saving and therefore combine economy, ecology and environmental protection perfectly. PAM is committed to a continuous realization of this basic principle in the swimming pool sector and all other areas of the company. PAM cover systems are 2
SENIOR System description SENIOR is designed to cover pools of any shape and size. In case of small, multishaped pool surfaces, several cut-to-size canvases can be used to cover as much of the pool surface as possible. These canvases are fitted on different mobile pool cover rollers and stored outside the operation zone during running time. Small and light systems are moved manually on guide rolls or fixed castors. Large systems are motor driven and run with fixed castors on guide rails in parallel to the pool. They can for example be hidden under a storage shed near the garden bed. The rolled-up cover can be equipped with a sitting bench, semi-circled casing or flexible protective coating, thus providing an optimum protection from environmental impact and improper use through bathing guests. Execution examples SENIOR (Fig. from top to bottom): motor driven on guide rails freestanding with guide rolls fixed installation (example: equipped with pool cover PAMatic) 3
SENIOR SENIOR mobile Execution example: Motor driven with fixed castors 4
SENIOR SENIOR mobile system construction 1 Roller shaft with cover 2 Driving axle 3 Axle bearing 4 Driving motor 5 Bearing block 6 Guide rails 8 Fixed castors 9 Driving axle of castors 10 Casing 11 Control column 12 Switch box with control unit 13 Pull-out device 7 Driving motor of castors 5
SENIOR SENIOR mobile sectional view and dimensions A Ø roller shaft B Ø roller shaft with cover C Total height D Total width C B A D 6
SENIOR SENIOR mobile sectional view and dimensions Construction dimensions for PAMtex cover (other pool dimensions and shapes polygonal, multi-shaped on request) Pool dimensions Wave number / ø ø roller shaft with cover Total height Total width 12,50 x 25 m 1 / 356 mm 592 mm 1070 mm 1000 mm 16,66 x 33,33 m 2 / 256 mm 610 mm 1070 mm 1000 mm 21 x 50 m 2 / 356 mm 760 mm 1150 mm 1000 mm Version with 2 roller shafts 7
SENIOR SENIOR mobile Execution example: freestanding with guide rolls 8
SENIOR SENIOR mobile sectional view and dimensions A Ø roller shaft B Ø roller shaft with cover C Total height D Total width C B A 530 D Construction dimensions for PAMtex cover (other pool dimensions and shapes polygonal, multi-shaped on request) Pool dimensions Wave number / ø ø roller shaft with cover Total height Total width 12,50 x 25 m 1 / 356 mm 592 mm 826 mm 800 mm 16,66 x 33,33 m 2 / 256 mm 610 mm 835 mm 800 mm 21 x 50 m 2 / 356 mm 760 mm 910 mm 800 mm 9
SENIOR SENIOR fixed installation Execution example: with PAMtex pool cover 10
SENIOR SENIOR fixed installation sectional view and dimensions A Ø roller shaft B Ø roller shaft with cover C Total height D Total width C B A 150 D Construction dimensions for PAMtex cover (other pool dimensions and shapes polygonal, multi-shaped on request) Pool dimensions Wave number / ø ø roller shaft with cover Total height Total width Motor 12,50 x 25 m 1 / 356 mm 592 mm 742 mm 592 mm GR 30 16,66 x 33,33 m 2 / 256 mm 610 mm 760 mm 610 mm GR 30 21 x 50 m 2 / 356 mm 760 mm 910 mm 760 mm GR 30 11
SENIOR SENIOR fixed installation Execution example: with PAMatic pool cover 12
SENIOR SENIOR fixed installation sectional view and dimensions A Ø roller shaft B Ø roller shaft with cover C Total height D Total width C B A 150 D Construction dimensions for PAMatic cover (other pool dimensions and shapes polygonal, multi-shaped on request) Pool dimensions Wave number / ø ø roller shaft with cover Total height Total width Motor 12,50 x 25 m 1 / 406 mm 840 mm 990 mm 840 mm GG 60 16,66 x 33,33 m 2 / 306 mm 900 mm 1050 mm 900 mm GG 60 21 x 50 m 2 / 406 mm 1115 mm 1265 mm 1115 mm GG 60 Axial sag dimensions of roller shaft: for 12,50 x 25 m pool: 33 mm for 16,66 x 33,33 m pool: 19 mm for 21 x 50 m pool: 30 mm 13
SENIOR Execution examples 14
SENIOR Execution examples 15
Casing for PERFECT STAR / SENIOR System description A PERFECTSTAR cover systems for sports pools are especially designed to ensure perfect functioning and optimum accident prevention. Cover systems, which are directly installed near the pool border, serve as springboard for young bathing guests. In order to prevent this, the covers are overbuilt, however very often not safely enough: the front side (pool side) remains open and is therefore a source of danger for bathing guests and bathing stuff. Moreover, there are no safety fences to prevent accidents, especially when the area is very crowded. B Casing options for PERFECT STAR A Semi-circled casing along the pool border B Concrete stone along the pool border C Concrete stone with mobile cover D Concrete stone with springboards C D 16
Casing for PERFECT STAR / SENIOR 2 3 1 Version A 1 Shaft closed on both sides, with control elements on the outside 2 Safety fence 3 Automatic shaft closing device 17
Casing for PERFECT STAR / SENIOR Version A system construction 8 7 1 4 5 6 3 2 9 1 Roller shaft with cover 2 Driving axle 3 Driving motor 4 Framework construction with roller guide and hydraulic cylinders 6 Concrete enclosure for dry shaft 7 Wood casing for stainless steel tube 8 Safety fence 9 Pull-out device 5 Shaft closing device (perforated plate) 18
Casing for PERFECT STAR / SENIOR Version A sectional view and dimensions A B C A Cover width B Ø roller shaft with cover C Ø roller shaft Version with 2 roller shafts Construction dimensions for PAMtex cover (other pool dimensions and shapes polygonal, multi-shaped on request) Pool dimensions Cover length Cover width Wave number / ø ø roller shaft with cover 8 x 16,66 m 16,66 m 7,90 m 1 / 204 mm 436 mm 12,50 x 25 m 25 m 12,40 m 1 / 306 mm 563 mm 12,50 x 50 m 50 m 12,40 m 1 / 404 mm 780 mm 16,66 x 25 m 2 pieces of 25 m 2 pieces of 7,90 m 2 / 206 mm 515 mm 16,66 x 50 m 2 pieces of 50 m 2 pieces of 7,90 m 2 / 304 mm 734 mm 21 x 50 m 2 pieces of 50 m 2 pieces of 10,25 m 2 / 356 mm 757 mm 19
Casing for PERFECT STAR / SENIOR Version A Casing with removable benches Casing with removable springboards 20
Casing for PERFECT STAR / SENIOR 2 3 1 Version B 1 Shaft closed on both sides with control elements on the outside 2 Concrete stone casing 3 Automatic shaft closing device 21
Casing for PERFECT STAR / SENIOR Version B system construction 3 2 1 4 5 6 1 Cover (SENIOR system) 2 Shaft closing device (roller shutter) motor driven with guide profile 3 Roller shutter casing 4 Lateral shaft cover 5 Concrete stone (finished part or in-situ concrete) 6 Pull-out device 22
Casing for PERFECT STAR / SENIOR Version B sectional view and dimensions 130 B A C 130 D A Ø roller shaft B Ø roller shaft with cover C Inner stone height D Inner stone width Version with 2 roller shafts Construction dimensions for PAMtex cover (other pool dimensions and shapes polygonal, multi-shaped on request) Pool dimensions Wave number / ø ø roller shaft with cover Inner stone height Inner stone width 12,50 x 25 m 1 / 356 mm 592 mm 800 mm 736 mm 16,66 x 33,33 m 2 / 256 mm 610 mm 800 mm 736 mm 21 x 50 m 2 / 356 mm 760 mm 1087 mm 900 mm Length of concrete stone segment: 1070 mm 23
Casing for PERFECT STAR / SENIOR 2 3 1 Version C 1 Shaft closed on both sides with control elements on the outside 2 Concrete stone casing 3 Shaft closing device (sectional door) 24
Casing for PERFECT STAR / SENIOR Version C system construction 2 1 3 4 5 6 1 Cover (SENIOR system) 2 Sectional door 3 Lateral shaft cover 4 Concrete stone (finished part or in-situ concrete) 5 Guide rail 6 Pull-out device 25
Casing for PERFECT STAR / SENIOR Version C sectional view and dimensions A Ø roller shaft B Ø roller shaft with cover C Inner stone height D Inner stone width B A C D Construction dimensions for PAMtex cover (other pool dimensions and shapes polygonal, multi-shaped on request) Pool dimensions Wave number / ø ø roller shaft with cover Inner stone height Inner stone width 12,50 x 25 m 1 / 356 mm 592 mm 850 mm 736 mm 16,66 x 33,33 m 2 / 256 mm 610 mm 900 mm 736 mm 21 x 50 m 2 / 356 mm 760 mm 1050 mm 900 mm Length of concrete stone segment: 1070 mm 26
Casing for PERFECT STAR / SENIOR Version C Version with 2 roller shafts and sliding front two-piece (in case of 3 roller shafts three-piece front) 27
Casing for PERFECT STAR / SENIOR 4 2 3 1 Version D 1 Shaft closed on both sides with control elements on the outside 2 Safety barrier chain or handrail 3 Automatic shaft closing device 4 Concrete finished parts with springboards suitable for competition 28
Casing for PERFECT STAR / SENIOR Version D Tender specification Cover system with pool cover roller for sports pools with springboards, directly mounted behind the flow-off channel, including: Stainless steel pool cover roller for multi-layered pool covers (canvas). The system is encased in concrete molded parts (C-shaped), which are partially-submerged behind the pool, thus providing an optimum cover protection. The front side of the construction is closed by a corresponding shaft closing device, which can for ex. be lifted hydraulically from the front. The closing device consists of a steel frame construction and is equipped with a perforated plate or synthetic coating and a number of light hydraulic cylinders supported by the shaft wall/ceiling or ground. The system also includes control unit, hydraulic aggregate, tubing and valves. The hydraulic liquid is non-poisonous. Alternatively, the front side of the shaft can be closed by a roller shutter (running from top to bottom). The roller shutter is motor driven by a tubular motor and guided through a U-profile laterally and at the bottom. Roller shaft uninterrupted up to a length of 10.50 m. Roller shutter material: preferably stainless steel or aluminium coated. The pool cover roller system is motor driven and equipped with bearings, docked on the inside of the concrete casing. The driving motors and the corresponding control elements are placed into hollow spaces of the concrete casing. The roller shaft diameter depends on the length and width of the cover. Type of stainless steel: W. Nr. 1.4301. The steel springboards are slightly slanted towards the pool and firmly fixed to the horizontal concrete element. Their surfaces are epoxy-coated and sand-covered; the dimensions are compatible with competition conditions. There is a sufficient number of bearing devices for safety chains / the casing is equipped with corresponding hollow spaces. Piece(s): Chain (m): System size for pool: L = W = Concrete casing: L = W= H = Rear stairs: Roller shafts: Number (1 or 2): Length: Front closing device: Hydraulic Roller shutter 29
Casing for PERFECT STAR / SENIOR Version D Tender specification Multi-layered pool cover: floating, three-layered, 6 mm thick, heat insulating and unplasticized PE canvas with reinforced smooth surface. The canvas consists of different webs, welded together longitudinally. The surface is made of unplasticized PE material, which is reinforced by a polyester layer (thickness: 0.6 mm, weight: 108 g/m_). The layer below is a 5.5 mm thick foam layer made of closed-cell PE material (bulk density according to ISO 845 in kg/m2, 33 +4/-6) and a pyramid embossed underside (water side). The holohedral pyramid structure provides high adhesiveness to the bottom level, consisting of a vapour diffusion resisting, coated PE material (thickness: 100 µm). Material samples are enclosed. The front side of the cover is equipped with a loop and a stainless steel pull-out tube (if there is a pull-out device) or a PP tube. The tube ends are fitted with polyamide wheels for easy overcoming eventual superelevations of the inner pool border. The three-point pull-out device with polyester rope can be rolled-up manually or automatically (length: cover length plus necessary addition). Colour: grey or blue. Size: see drawing Shape: see drawing Delivery and mounting: Quantity: Unit: Square meters: Wind protection: The wind protection includes: coated wire ropes, welded-in laterally on the longitudinal sides; the corners are fitted with fixing elements and quick tensioning device. Un-straight sides or individual sections are equipped with eyes, which are tensioned laterally to the pool border. Delivery and mounting: Quantity: Unit : m/ piece: 30
Casing for PERFECT STAR / SENIOR Version D sectional view and dimensions G D A P J O M L N Q I F C B K E H A Cover width B Ø roller shaft with cover C Ø roller shaft D Stone: inner length E Stone: inner width F Stone: inner height G Total stone length H Total stone width I Total stone height J Service opening K Length of stone segment L Height of pull-out opening M Axle distance to stone back-wall N Axle distance to stone ceiling O Width of springboard P Depth of springboard Q Height of springboard above water R Height of stone above ground Version with 2 roller shafts R 31
Casing for PERFECT STAR / SENIOR Version D construction dimensions Construction dimensions for PAMtex cover Pool dimensions Cover length Cover width Wave number / ø ø roller shaft with cover Distances M / N 8 x 16,66 m 16,66 m 7,90 m 1 / 204 mm 436 mm 368 mm each 12,50 x 25 m 25 m 12,40 m 1 / 306 mm 563 mm 432 mm each 12,50 x 50 m 50 m 12,40 m 1 / 404 mm 780 mm 540 mm each 16,66 x 25 m 2 pieces of 25 m 2 pieces of 7,90 m 2 / 206 mm 515 mm 408 mm each 16,66 x 50 m 2 pieces of 50 m 2 pieces of 7,90 m 2 / 304 mm 734 mm 517 mm each 21 x 50 m 2 pieces of 50 m 2 pieces of 10,25 m 2 / 356 mm 757 mm 529 mm each (other pool dimensions and shapes polygonal, multi-shaped on request) Construction dimensions for concrete-stone casing Pool dimensions Outer dimens.l/w/h Inner dimens.l/w/h Height pull-out opening Service opening W/H Segment length 8 x 16,66 m 8800/ 886/ 1036 8500/ 636/ 736 408 mm 500 / 735 mm 7 pieces of 1257 mm 12,50 x 25 m 13300/ 1013/ 1163 13000/ 763/ 863 472 mm 500 / 735 mm 10 pieces of 1330 mm 12,50 x 50 m 13300/ 1230/ 1380 13000/ 980/ 1080 582 mm 500 / 735 mm 10 pieces of 1330 mm 16,66 x 25 m 17460/ 965/ 1115 17160/ 715/ 815 448 mm 500 / 735 mm 13 pieces of 1334 mm 16,66 x 50 m 17460/ 1184/ 1334 17160/ 934/ 1034 557 mm 500 / 735 mm 13 pieces of 1334 mm 21 x 50 m 21800/ 1207/ 1357 21500/ 957/ 1057 569 mm 500 / 735 mm 17 Spieces 1264 mm dimensions in mm dimensions in mm 32
Casing for PERFECT STAR / SENIOR Version D Execution example: Roller shutter front 33
Casing for PERFECT STAR / SENIOR Execution examples Examples: Galvanized steel with individual casing and swingingsliding front (element length: up to 3 m) 34
Casing for PERFECT STAR / SENIOR Execution examples Examples: Concrete finished parts casing with swinging-sliding front (element length: up to 3 m) Execution details multi-flap system 35
OLYMPIA System description OLYMPIA is designed to meet highest demands of building owners. During operation time, the system is let-in flush with pool border and remains invisible to the bathing guests. After closing time, the system is lifted up vertically into operating position from a dry shaft next to the pool. The horizontal shaft cover is accessible at any state of operation and tiled (tiles match with pool tiles). Therefore, it is equipped with a very powerful hydraulic lifting device, which is as stable as an agricultural machine. The system is reduced to a minimum number of movable components thus assuring longevity and low maintenance. The cover material consists of a multilayered canvas, which is stored in a dry place. A pull-out device can be mounted opposite the bearing side of the cover for easy handling of the system in case of any pool size. 36
OLYMPIA System construction (Version with two roller shafts) 1 Roller shaft with cover 2 Driving axle 3 Driving motor 4 Hydraulic cylinder 5 Framework with guide rollers 6 Accessible shaft cover 7 Control column 8 Switch box with control unit 9 Dry shaft 10 Pull-out device 37
OLYMPIA Sectional view and dimensions A B C A Cover width B Ø roller shaft with cover C Ø roller shaft Version with 2 roller shafts Construction dimensions for PAMtex cover (other pool dimensions and shapes polygonal, multi-shaped on request) ø roller shaft Pool dimensions Cover length Cover width Wave number / ø with cover Shaft LxHxW inside 8 x 16,66 m 16,66 m 7,90 m 1 / 204 mm 436 mm 9,0 x 1,5 x 0,9 m 12,50 x 25 m 25 m 12,40 m 1 / 306 mm 563 mm 13,5 x 1,5 x 1,1 m 12,50 x 50 m 50 m 12,40 m 1 / 404 mm 780 mm 13,5 x 1,6 x 1,3 m 16,66 x 25 m 2 pieces of 25 m 2 pieces of 7,90 m 2 / 206 mm 515 mm 17,66 x 1,5 x 1,1 m 16,66 x 50 m 2 pieces of 50 m 2 pieces of 7,90 m 2 / 304 mm 734 mm 17,66 x 1,6 x 1,3 m 21 x 50 m 2 pieces of 50 m 2 pieces of 10,25 m 2 / 356 mm 757 mm 22,0 x 1,6 x 1,3 m 38
OLYMPIA Execution examples 39
OLYMPIA Execution examples 40
OLYMPIA Execution examples 41
OLYMPIA Execution examples 42
OLYMPIA Execution examples 43
SPRINTinternationally patented System description This cover combines all the properties of a state-of-the-art system, capable of assuring operating reliability in tough working environments and meeting the demands from operators for an easily handling cover, which at the same time corresponds to the newest hygiene standard in the public swimming pool sector. SPRINT systems are equipped with roller shutter covers made of hard PVC. The roller shaft is fixly installed in a shaft and runs on bearings on both lateral sides. It is connected to the drive unit via watertight wall traverse; the drive unit is installed in the dry shaft next to the pool. During operating time, an automatic lid closes the flooded bearing shaft of the rolled-up cover safely. 44
SPRINTinternationally patented For covering the pool, the shaft lid is opened wide enough to let the roller shutter swim out and cover the pool. The shaft lid is accessible at any state of operation. SPRINT provides excellent maintenance properties, which allow maintenance of the system and the flooded storage shaft with a minimum amount of time and effort. This is mainly due to the fact that the shaft can be emptied without considerably affecting the water level of the pool. As the shaft is connected to the hydraulic system of the pool, it is continuously flooded, thus making sure that all the necessary hygiene parameters are met. Installation requirements: one straight pool side, installation of a separation wall. SPRINT system is internationally patented. System construction 1 Roller shutter 2 Driving axle 3 Wall traverse with sealing 4 Counter bearing 5 Driving motor 6 Compressor 7 Hydraulic cylinder 8 Framework with roller guide 9 Lid (perforated channelled plate) 10 Hand bar 11 Control column 12 Switch box with control unit 13 Separation wall, 8-12 cm below water level 14 Wall reinforcement (in case of stainless steel pools) 15 Shaft containing drive unit and draining device 45
SPRINTinternationally patented Sectional view and dimensions A B C A Cover width B Ø roller shaft with cover C Ø roller shaft Maintenance operation Construction dimensions for Standard cover (other pool dimensions and shapes polygonal, multi-shaped on request) Pool dimensions Cover length Cover width Ø roller shaft Ø roller shaft with cover Shaft L x W inside 8 x 16,66 m 16,66 m 7,90 m 304 mm 679 mm 8,0 x 1,0 m 12,50 x 25 m 25 m 12,40 m 506 mm 900 mm 13,5 x 1,2 m 16,66 x 25 m 2 pieces of 25 m 2 pieces of 7,90 m 306 mm 805 mm 17,66 x 1,1 m H = Pool bottom 46
Further installations Execution example Rucksack installation with closing flap 47
Further installations Execution example swing construction 48
Further installations Execution example swing construction 49
PAM PIONIER ABDECKSYSTEME-TECHNIK GMBH Am Hochstand 22 D-85640 Putzbrunn Phone +49 (0)89/46 30 69 Fax +49 (0)89/4 60 55 62 www.pam-abdecksysteme.de We reserve the right to make technical changes. The contents of this brochure are the exclusive copyright property of PAM PIONIER ABDECKSYSTEME-TECHNIK GmbH, Putzbrunn. Reprinting or copying even partially is strictly prohibited. Any infringement of copyright will be prosecuted.