M/63/M/, M/63/M/2 ngular grippers Single acting, double acting - Magnetic piston - Ø 8... 25 mm Smooth, accurate movement ong, uninterrupted service life ow weight ompact size Integral magnets for positional feedback TENI DT Medium: ompressed air, filtered, lubricated or non-lubricated peration: Single acting, angular, magnetic piston (M/63/M/) Double acting angular, magnetic piston (M63/M/2) perating pressure: 2... (Ø 8 mm 3,6... Ø mm 3... ) perating temperature: +6 onsult our Technical Service for use below +2 Mounting: Mounting holes on three faces MTERIS ody: aluminium alloy Fingers: carbon steel Elastomers: nitrile STNDRD MDES - SINE TIN MDES ESSRIES Ø Port size Effective gripping force (N) at * pening losing Switch with straight Switch with elbow Straight Tube diameter in bold Elbow 8 M3,6, M/635/M/ M/344/EU/3PV M/344/EU/3PV M22543 M24743 M3,,4 M/636/M/ M/344/EU/3PV M/344/EU/3PV M22543 M24743 6 M5 2,8, M/637/M/ M/344/EU/3PV M/344/EU/3PV M22545 M24745 2 M5 6, 8, M/638/M/ M/344/EU/3PV M/344/EU/3PV M22545 M24745 25 M5, 38, M/639/M/ M/344/EU/3PV M/344/EU/3PV M22545 M24745 * rip point = 3 mm For information on additional magnetic switches see page -29 ther s are available, please see section 7 STNDRD MDES - DUE TIN Ø Port size Effective gripping force (N) at * pening losing MDES ESSRIES Switch with straight Switch with elbow Straight Tube diameter in bold Elbow 8 M3 2,6,6 M/635/M/2 M/344/EU/3PV M/344/EU/3PV M22543 M24743 M3 3,8 2,5 M/636/M/2 M/344/EU/3PV M/344/EU/3PV M22543 M24743 6 M5 7, 2,8 M/637/M/2 M/344/EU/3PV M/344/EU/3PV M22545 M24745 2 M5 32, 24, M/638/M/2 M/344/EU/3PV M/344/EU/3PV M22545 M24745 25 M5 62, 48, M/639/M/2 M/344/EU/3PV M/344/EU/3PV M22545 M24745 * rip point = 3 mm For information on additional magnetic switches see page -29 ther s are available, please see section 7 For further information www.norgren.com/info/en-83-83
M/63/M/, M/63/M/2 ngular grippers Single acting, double acting - Magnetic piston - Ø 8... 25 mm TERETI SIN RIPPIN FRES M/635/M/ M/636/M/ M/637/M/ 5 2 5 4 3 2 2 3 2 3 2 3 4 M/638/M/ M/639/M/ 5 5 2 4 6 2 4 6 Effective closing gripping forces = Theoretical closing gripping force x,85 M/635/M/2 M/636/M/2 M/637/M/2 5 5 2 5 4 3 2 2 3 2 3 2 3 4 M/638/M/2 M/639/M/2 Workpiece 5 5 2 4 6 2 4 6 losing pening Effective closing gripping forces = Theoretical closing gripping force x,85-84
SI DIMENSINS M/63/M/ M P Y I K F E V S X D Q R Port size U W T MDES Ø D E F I K M/635/M/.. 8 2,5 2, 2,5 29 5,5 -,3 3 24 5,5 2,5 M/636/M/.. 4,5 2,5 4,5 36 7 -,3 6 3 6 3 M/637/M/.. 6 24 3 3 7,5 42,5 9 -,3 8 35 8 3 M/638/M/.. 2 3 3,5 3,5 22 5 2 -,3 9 39,5 4 M/639/M/.. 25 36 4 5 26 58 4 -,3 2,5 45,5 2 5 MDES Ø M P Q R S T U V M/635/M/.. 8 8,5 2 5 Ø 9 +,5; * 3 9 4,5 - - 4,5 M/636/M/.. 2 23 7 Ø +,5;,5* 6 7,5 9 M/637/M/.. 6 22,5 34 26 Ø 7 +,5;,5* 22 4 7,5 2 4 22 M/638/M/.. 2 25 45 35 Ø 2 +,5;,5* 26 6 8 3 6 24,5 M/639/M/.. 25 28,5 52 4 Ø 26 +,5;,5* 32 2 9 8 2 28 MDES Ø W X Y kg M/635/M/.. 8 5 7,5 3 - M2,5; 4,5* (base); M3; 3,5* (side); Ø 3,2 (front) M3 M2,5,2 M/636/M/.. 8 2,5 3 - M3; 5* M3 M3,4 M/637/M/.. 6 24 25 3 - M4; 7* M5 M3, M/638/M/.. 2 3 32,5 3 - M5; 8* M5 M4,8 M/639/M/.. 25 36 38.5 3 - M6; * M5 M5,3 * Deep -85
M/633/M/2 8 ngular grippers Double acting. Magnetic piston - Ø 6... 2 mm Smooth, accurate movement ong, uninterrupted service life ow weight ompact size Integral magnets for positional feedback TENI DT Medium: ompressed air, filtered, lubricated or non-lubricated peration: Double acting, angular, magnetic piston perating pressure: 2... perating temperature: +6 onsult our Technical Service for use below +2 Mounting: Mounting holes on three surfaces MTERIS ody: aluminium alloy Fingers: carbon steel Slide plate: carbon steel Elastomers: nitrile STNDRD MDES Ø Port size Effective gripping force (N) at * pening losing MDES ESSRIES Switch with straight Switch with elbow Straight Tube diameter in bold Elbow 6 M5 64/ 55,/ M/6335/M/2 M/344/EU/3PV M/344/EU/3PV M22545 M24745 2 M5 34,/ 3,/ M/6336/M/2 M/344/EU/3PV M/344/EU/3PV M22545 M24745 * Example - calculating the effective closing gripping force (N) at for the M/6335/M/2. For information on additional magnetic switches see page -29 Establish the approximate grip point in cm (not mm), example 4 cm. ther s are available, please see section 7 alculation = 55 / = 55 / 4 Effective closing gripping force = 3,75N. Theoretical closing gripping forces M/6335/M/2 M/6336/M/2 Workpiece 5 4 3 2 5-86 2 4 6 Effective closing gripping forces = Theoretical closing gripping force x,85 2 4 6 8 For further information www.norgren.com/info/en-86
SI DIMENSINS M/633/M/2 Q R P M F I K X Y Y X V D D D E Z S T W U Port size MDES Ø D E F I K M/6335/M/2 6 24 3 2,5 28,5 87,5 8 -,3 69 59 8 4 M/6336/M/2 2 3 4 3 33,5 3 -,3 8 69,5 4 MDES Ø M P Q R S T U V M/6335/M/2 6 3 34 26 Ø 7 +,5;,5* 22 4,5 2 4 25 M/6336/M/2 2 35 45 35 Ø 2 +,5;,5* 26 6,5 3 6 28 MDES Ø W X Y Z D kg M/6335/M/2 6 24 9 3 3 M4; 7* M3 37,5 M5,5 M/6336/M/2 2 3 9 3 3 M5; 8* M4 43,5 M5,28 * Deep -87
M/634/M/, M/634/M/2 Parallel grippers Single acting, double acting.- Magnetic piston - Ø... 25 mm Ideal for general purpose gripping applications Smooth, accurate movement ong, uninterrupted service life ow weight ompact size Integral magnets for positional feedback MTERIS ody: aluminium alloy Top plate: carbon steel Fingers: carbon steel External screws: carbon steel Elastomers: nitrile TENI DT Medium: ompressed air, filtered, lubricated or non-lubricated peration: Single acting, parallel, magnetic piston (M/634/M/) Double acting, parallel, magnetic piston (M/634/M/2) perating pressure: 2,5... (Ø mm 3,5... ) M/634/M/2:... (Ø mm,8... Ø 6 mm,2... ) perating temperature: +6 onsult our Technical Service for use below +2 Mounting: Mounting holes on three faces ripping repeatability: +/-, mm STNDRD MDES - SINE TIN Ø Port size Effective gripping force (N) at * pening losing MDES ESSRIES Switch with straight Switch with elbow Straight Tube diameter in bold Elbow M3 2 4,9 M/6343/M/ M/344/EU/3PV M/344/EU/3PV M22543 M24743 6 M5 3,9 2, M/6344/M/ M/344/EU/3PV M/344/EU/3PV M22545 M24745 2 M5 6,9 36,4 M/6345/M/ M/344/EU/3PV M/344/EU/3PV M22545 M24745 25 M5 3,7 54, M/6346/M/ M/344/EU/3PV M/344/EU/3PV M22545 M24745 * rip point = 3 mm For information on additional magnetic switches see page -29 ther s are available, please see section 7 STNDRD MDES - DUE TIN Ø Port size Effective gripping force (N) at * pening losing MDES ESSRIES Switch with straight Switch with elbow Straight Tube diameter in bold Elbow M3 4,6 9,4 M/6343/M/2 M/344/EU/3PV M/344/EU/3PV M22543 M24743 6 M5 34, 25,5 M/6344/M/2 M/344/EU/3PV M/344/EU/3PV M22545 M24745 2 M5 6,9 45,7 M/6345/M/2 M/344/EU/3PV M/344/EU/3PV M22545 M24745 25 M5 87, 67, M/6346/M/2 M/344/EU/3PV M/344/EU/3PV M22545 M24745 * rip point = 3 mm For information on additional magnetic switches see page -29 ther s are available, please see section 7 For further information -88 www.norgren.com/info/en-88
TERETI SIN RIPPIN FRES M/6343/M/ M/6344/M/ 5 4 5 3 2 2 3 4 5 2 3 4 5 8 M/6345/M/ 2 M/6346/M/ 6 4 2 8 6 4 2 2 3 4 5 6 Effective closing gripping forces = Theoretical closing gripping force x,85 2 3 4 5 6 M/6343/M/2 M/6344/M/2 5 4 5 3 2 2 Workpiece grip point 2 3 4 5 2 3 4 5 M/6345/M/2 M/6346/M/2 8 2 6 4 2 2 3 4 5 6 8 6 4 2 2 3 4 5 6 riteria of workpiece weight When chucking a workpiece, weight should be within the range between / and /2 of the above gripping force. When chucking and then moving a workpiece, the workpiece may protrude or drop. Therefore, workpiece weight should be less than the above mentioned value. (Reference value is /3-/5) Weight depends on the operational condition, such as material and shape of workpiece or claw, speed and direction of moving workpiece (straight advance, rotation or swing, etc.) Effective closing gripping forces = Theoretical closing gripping force x,85 RIP PINT IMITTIN RNE verhang () 4 3 2 M/6343/M/.. 2 bar 4 bar 6 bar verhang () 4 3 2 M/6344/M/.. 4 bar 6 bar 2 bar verhang () 5 4 3 2 M/6345/M/.. 2 bar 4 bar 6 bar verhang () 6 5 4 3 2 M/6346/M/.. 4 bar 6 bar 2 bar 2 3 4 5 2 3 4 5 6 2 4 6 8 2 4 6 8-89
M E D S V I M/634/M/, M/634/M/2 Parallel grippers Single acting, double acting.- Magnetic piston - Ø... 25 mm SI DIMENSINS M/634/M/ P K Q R F U W T Port size MDES Ø max D E F I K M/6343/M/.. 7** +,6 / -,2; 3*** ±,4 4,5 25 6,5 59,5 5,5 -,3 43 5 6 3 M/6344/M/.. 6 26** + 2,3; 8*** +,6 / -,2 6,5 37,5 9 7 7 -,3 52 7,5 8 3 M/6345/M/.. 2 36** +,5 / -,9; 24*** +, / -,9 8,5 49 23 83,5 8 -,4 6,5 2 4 M/6346/M/.. 25 42** +, / -,7; 28*** ±,4 57,5 27 95 -,3 68 23 2 5 MDES Ø M P Q R S T U V W M/6343/M/.. 2 23 7 Ø +,5;,5* 6 7,5 6 8 M3 M/6344/M/.. 6 23 34 26 Ø 7 +,5;,5* 22 4 7,5 2 4 8 24 M5 M/6345/M/.. 2 26 45 35 Ø 2 +,5;,5* 26 6 8 3 6 9 3 M5 M/6346/M/.. 25 3 52 4 Ø 26 +,5;,5* 32 2 9 8 2 22 36 M5 MDES Ø kg M/6343/M/.. M3; 5* M3,5 M/6344/M/.. 6 M4; 7* M3,2 M/6345/M/.. 2 M5; 8* M4,22 M/6346/M/.. 25 M6; * M5,37 * Deep ** pen *** losed -9
M/635/M/, M/635/M/2 Parallel grippers - precision Single acting, double acting - Magnetic piston - Ø 8... 5 mm Ideal for applications demanding accuracy and precise repeatability Smooth, accurate movement ong, uninterrupted service life ow weight ompact size Integral magnets for positional feedback MTERIS ody: aluminium alloy Fingers: stainless steel uide rail: stainless steel Elastomers: nitrile STNDRD MDES - SINE TIN Ø Port size Effective gripping force (N) at * pening losing MDES ESSRIES Switch with straight Switch with elbow Straight Tube diameter in bold Elbow 8 M3 2,7 4, M/6354/M/ M/344/EU/3PV M/344/EU/3PV M22543 M24743 M3 2,4 6,8 M/6355/M/ M/344/EU/3PV M/344/EU/3PV M22543 M24743 6 M5 5,4 2, M/6356/M/ M/344/EU/3PV M/344/EU/3PV M22545 M24745 2 M5 7,3 34, M/6357/M/ M/344/EU/3PV M/344/EU/3PV M22545 M24745 For information on additional magnetic switches see page -29 ther s are available, please see section 7 STNDRD MDES - DUE TIN Ø Port size Effective gripping force (N) at * pening losing MDES ESSRIES Switch with straight Switch with elbow Straight Tube diameter in bold Elbow 8 M3 9,9 5,8 M/6354/M/2 M/344/EU/3PV M/344/EU/3PV M22543 M24743 M3 5, 9,4 M/6355/M/2 M/344/EU/3PV M/344/EU/3PV M22543 M24743 6 M5 39, 26, M/6356/M/2 M/344/EU/3PV M/344/EU/3PV M22545 M24745 2 M5 6, 45, M/6357/M/2 M/344/EU/3PV M/344/EU/3PV M22545 M24745 32 M5 76, 57, M/6358/M/2 M/344/EU/3PV M/344/EU/3PV M22545 M24745 5 Rc /8 44, 347, M/6359/M/2 M/344/EU/3PV M/344/EU/3PV 2548 4748 * rip point = 3 mm For information on additional magnetic switches see page -29 ther s are available, please see section 7 For further information www.norgren.com/info/en-9-9
M/635/M/, M/635/M/2 Parallel grippers - precision Single acting, double acting - Magnetic piston - Ø 8... 5 mm TERETI SIN RIPPIN FRES M/6354/M/ 5 M/6355/M/ 4 M/6356/M/ 8 M/6357/M/ 5 5 3 2 6 4 2 2 3 4 2 4 6 7 2 4 6 8 3 6 9 2 TERETI SIN RIPPIN FRES RIP PINT IMITTIN RNE 5 4 3 2 M/6354/M/2 2 3 4 M/6356/M/2 5 5 8 6 4 2 M/6355/M/2 2 4 6 7 M/6357/M/2 verhang () verhang () 4 3 2 5 4 3 2 M/6354/M/.. 4 bar 6 bar 2 3 4 M/6356/M/.. 2 bar 4 bar 6 bar verhang () verhang () 4 3 2 6 4 2 M/6355/M/.. 2 bar 4 bar 6 bar 2 4 6 8 M/6357/M/.. 2 bar 4 bar 6 bar 2 4 6 8 3 6 9 2 2 4 6 8 3 6 9 2 25 2 5 5 5 4 3 2 5 3 5 2 bar 4 bar 6 bar 5 3 5 2 bar 4 bar 6 bar 5 5 5 5 5 5 5 5 Effective closing gripping forces = Theoretical closing gripping force x,85 Workpiece M/6358/M/2 M/6359/M/2 verhang () M/6358/M/.. verhang () M/6359/M/.. -92
SI DIMENSINS M/6354/M/.. F F D E Q I P D Y Z X R W I K M V U S T Port size MDES Ø D E I K M M/6354/M/.. 8 8 3 2,5 5 7 ±,3 9** +,5; 5*** +,5 2 5 Ø9+,5, * 3 ±,5 9 MDES Ø P Q R S T U V W X Y Z M/6354/M/.. 8,2 8,5 Ø,5 -,3 4,5 28,5 9,7 2 5 ±,25 7 4 M3 MDES Ø D F I kg M/6354/M/.. 8 M2,5; 4* Ø,5 +,2; * Ø 3,2 M2; 3,5* 4,5 5 M3, 3*,2 * Deep ** pen *** losed -93
M/635/M/, M/635/M/2 Parallel grippers - precision Single acting, double acting - Magnetic piston - Ø 8... 5 mm SI DIMENSINS M/6355/M/.. M/6356/M/.. M/6357/M/.. M/6358/M/.. F F P D Q I E D V Z D S Y U E X R T F W N I M K K Port size MDES Ø D E F I K M/6355/M/.. 4,7 5 4,5 7 2 ±,3 2 5,5** +,5; 9*** +,5 36 7 Ø +,5;,5* M/6356/M/.. 6 2 8 6 24 6 ±,3 3 22** +,8; 2*** +,3 5 26 Ø 7 +,5;,5* M/6357/M/... 2 24 8 8 3 22 ±,3 4 3** + 2,4/-,5; 6*** +,4 62 35 Ø 2 +,5;,5* M/6358/M/.. 32 3 4 9,5 3 3 ±,3 5 4** +,8; 9*** +,3 85 4 Ø 34 +,5; 2* MDES Ø M N P Q R S T U M/6355/M/.. 2 ±,5 23 9 7 2 Ø 3 -,3 2,5,5 47,5 M/6356/M/.. 6 25 ±,5 4 34 2 5 5 Ø 4 -,3 5 2 54 M/6357/M/.. 2 32 ±,5 6 45 6 7 8 Ø 5 -,3 2 3 64 M/6358/M/.. 32 4 ±,5 3 52 2 2 2 Ø 6 -,3 3 4 79 MDES Ø V W X Y Z D E M/6355/M/.. 7 7 ±,25 29 6 M3 M3; 4,5* Ø 2,5 +,2; 2,5* M4; 6* Ø 3,4 M/6356/M/.. 6 4 2 9 ±,25 36 8 M5 M4; 5* Ø 3 +,2; 3* M4; 6* Ø 3,4 M/6357/M/.. 2 7 27 2 ±,25 43 8 M5 M4; 7* Ø 4 +,2; 3,5* M5; 8* Ø 4,2 M/6358/M/.. 32 2 32 5 ±,25 53 3 M5 M8; 9* Ø 5 +,3; 4* M6; 9* Ø 5,2 MDES Ø F I K M N kg M/6355/M/.. M3, 4* 24 7,5 7 3 M3; 5* M3; 6* 6 M3; 5*,8 M/6356/M/.. 6 M4, 5* 3 7,5 9 42 M4; 6* M4; 7* 2 M3; 5*,6 M/6357/M/.. 2 M5, 7* 37 7,5 2 54 M5; 8* M5; 9* 27,3 M4; 6*,33 M/6358/M/.. 32 M6, 9* 46 9 28,5 7 M6; 8* M6; 9* 3 M5; 8*,66 * Deep ** pen *** losed -94
SI DIMENSINS M/6359/M/2 F D P F T S I U Z X R F E M W K I M Q D V Y E K D K N Port size MDES Ø D E F I K M/6359/M/2 5 4 24 2,5 5 58 ±,3 75 77** +,8/-,2; 4*** +,4 9 6 Ø 52+,5, 3* MDES Ø M N P Q R S T U M/6359/M/2 5 6 ±,5 45 75 4 42 3 Ø 8 -,2 55 7,5 MDES Ø V W X Y Z D E M/6359/M/2 5 33 46 2 -,25 7 2 Rc/8 M6; 2* Ø 6+,3; 7* M8; 2* Ø ; 6,5* MDES Ø F l K M N P kg M/6359/M/2 5 M6; 2* 6 38 5 M8; 2* 4 45 M5; 8 * M8; 5*,85 * Deep ** pen *** losed -95
M/636/M/2 Parallel grippers - low profile Double acting - Magnetic piston - Ø 8 & 2 mm Ideal for applications where operating space is restricted Smooth, accurate movement ong, uninterrupted service life ow weight ompact size Integral magnets for positional feedback MTERIS ody: aluminium alloy Fingers: carbon steel earings: stainless steel Elastomers: nitrile TENI DT Medium: ompressed air, filtered, lubricated or non-lubricated perating pressure: M/6364/M/2: 2... M/6365/M/2:,5... perating temperature: +6 onsult our Technical Service for use below +2 Mounting: Mounting holes on three faces ripping repeatability: +/-,7 mm ccuracy to centre: +/-, mm STNDRD MDES Ø Port size Effective gripping force (N) at * pening losing MDES ESSRIES Switch with straight Switch with elbow Straight Tube diameter in bold Elbow 8 M3 x,5 6,7 6,7 M/6364/M/2 M/344/EU/3PV M/344/EU/3PV M22543 M24743 2 M5 x,8 44, 44, M/6365/M/2 M/344/EU/3PV M/344/EU/3PV M22545 M24745 * rip point = 3 mm For information on additional magnetic switches see page -29 ther s are available, please see section 7 TERETI RIPPIN FRES M/6364/M/2 M/6365/M/2 4 6 Workpiece grip point 3 2 5 4 3 2 2 3 4 5 6 7 2 4 6 8 For further information -96 www.norgren.com/info/en-96
RIP PINT IMITTIN RNE M/6364/M/2 M/6365/M/2 4 6 verhang () 3 2 verhang () 5 4 3 2 2 3 4 5 6 7 SI DIMENSINS M/636/M/2 D N P Q R S T X Y M D F Z 2 4 6 8 U V W I K F Port size E E MDES Ø D E F I K M/6364/M/2 8 52 32 2,5 Ø 5 8, 3 26 32 6,2 7** +,7/-,5; *** +,7/-, M/6365/M/2 2 66 3 3 Ø 7,4 5 35 4 22,8 23** +,9/-,5; *** +,9/-, MDES Ø M N P Q R S T U M/6364/M/2 8 24 7 2 5 3 9 2 8,5 Ø 8+,5; * M/6365/M/2 2 2 4 2 7 7 8 25 2 Ø 8+,5; * MDES Ø V W X Y Z D E M/6364/M/2 8 24 4 Ø 5 27 2,5+,3; 2,5* M3; 5* M2,5; 3* M3 2 M3; 5* M/6365/M/2 2 3 5 Ø 5 36 3+,3; 3* M4; 8* M3; 3* M5 2 M4; 6* MDES Ø F kg M/6364/M/2 8 Ø 2,5+,3; 2,5* M3; 5*,9 M/6365/M/2 2 Ø 3+,3; 3* M3; 5*,2 * Deep ** pen *** losed -97
M/638/M/2 Parallel grippers - three jaw Double acting - Magnetic piston - Ø 6 & 2 mm Ideal for gripping spheres or components with circular faces Smooth, accurate movement ong, uninterrupted service life ow weight ompact size Integral magnets for positional feedback TENI DT Medium: ompressed air, filtered, lubricated or non-lubricated peration: Double acting, three jaw parallel, magnetic piston perating pressure: 2...,5... M/6386/M/2 perating temperature: +6 onsult our Technical Service for use below +2 Mounting: Mounting holes on base ripping repeatability: +/-, mm MTERIS ody: aluminium alloy Top plate: carbon steel Fingers: carbon steel External screws: carbon steel Elastomers: nitrile STNDRD MDES Ø Port size Effective gripping force (N) at * pening losing MDES ESSRIES Switch with straight Switch with elbow Straight Fitting Tube diameter in bold Elbow Fitting 6 M5 27 2, M/6385/M/2 M/344/EU/3PV M/344/EU/3PV M22545 M24745 2 M5 36, 27, M/6386/M/2 M/344/EU/3PV M/344/EU/3PV M22545 M24745 * rip point = 3 mm For information on additional magnetic switches see page -29 ther s are available, please see section 7 For further information -98 www.norgren.com/info/en-98
TERETI SIN RIPPIN FRES RIP PINT IMITTIN RNE M/6385/M/2 M/6386/M/2 M/6385/M/2 M/6386/M/2 5 4 3 2 5 4 3 2 Pressure (bar) 7 6 5 4 3 2 Pressure (bar) 7 6 5 4 3 2 2 3 4 5 6 2 3 4 5 6 2 3 4 5 6 2 3 4 5 6 7 8 9 Effective closing gripping forces = Theoretical closing gripping force x,85 riteria of workpiece weight When chucking a workpiece, weight should be within the range between / and /2 of the above gripping force. When chucking and then moving a workpiece, the workpiece may protrude or drop. Therefore, workpiece weight should be less than the above mentioned value. (Reference value is /3-/5) Weight depends on the operational condition, such as material and shape of workpiece or claw, speed and direction of moving workpiece (straight advance, rotation or swing, etc.) Workpiece grip point SI DIMENSINS M/638/M/2 P Q 2 I T K F R D M 2 Port size E S MDES Ø D E F I K M M/6385/M/2 6 53 23 27 2 2,5 M4; 7* 5 2,5 24 Ø 32 Ø 42 Ø 3 -,5 M/6386/M/2 2 6,5 3,5 28 2 3 M5; 8* 2,5 7 3, 3 Ø 38 Ø 54 Ø 3 -,5 MDES Ø P Q R S T kg M/6385/M/2 6 7 -,3 M3 9,5** +,9/-,4; 5,5*** +,9/-,4 7,5 Ø 7+,5;,5* M5,6 M/6386/M/2 2 8 -,4 M4 3 **+,6/-,4; 7*** +,2/-,4 8 Ø 2+,5; 5* M5,28 * Deep ** pen *** losed -99
M/639/M/2 Parallel grippers - long stroke Double acting - Magnetic piston - Ø 2... 25 mm Ideal for handling wide components Smooth, accurate movement ong, uninterrupted service life ow weight ompact size Integral magnets for positional feedback TENI DT Medium: ompressed air, filtered, lubricated or non-lubricated perating pressure: 2... perating temperature: +6 onsult our Technical Service for use below +2 Mounting: Mounting holes on two faces MTERIS ody: aluminium alloy Piston rods: stainless steel External nuts: carbon steel Elastomers: nitrile STNDRD MDES Ø Port size Effective gripping force (N) at * pening losing MDES ESSRIES Switch with straight Switch with elbow Straight Tube diameter in bold Elbow 2 M5 27 27 M/6394/M/2 M/344/EU/3PV M/344/EU/3PV M22545 M24745 6 M5 55, 55, M/6395/M/2 M/344/EU/3PV M/344/EU/3PV M22545 M24745 2 M5 85 85 M/6396/M/2 M/344/EU/3PV M/344/EU/3PV M22545 M24745 25 M5 35, 35, M/6397/M/2 M/344/EU/3PV M/344/EU/3PV M22545 M24745 * rip point = 3 mm For information on additional magnetic switches see page -29 ther s are available, please see section 7 For further information -2 www.norgren.com/info/en-2
EFFETIVE RIPPIN FRES M/6394/M/2 M/6395/M/2 5 4 3 2 8 6 4 2 2 3 4 5 6 7 2 3 4 5 6 7 8 M/6396/M/2 M/6397/M/2 6 4 2 8 6 4 2 25 2 5 5 2 4 6 8 9 3 6 9 2 RIP PINT IMITTIN RNE M/6394/M/2 M/6395/M/2 M/6396/M/2 M/6397/M/2 7 8 9 2 verhang () 6 5 4 verhang () 7 6 5 verhang () 8 7 6 verhang () 9 8 4 5 6 7 5 6 7 8 6 7 8 9 8 9 2 MUNTIN EXMPES -2
M/639/M/2 Parallel grippers - long stroke Double acting - Magnetic piston - Ø 2... 25 mm SI DIMENSINS M/639/M/2 I Z J K M F Y N K D V W X E P Q E E I R S T U F F D D Port size MDES Ø D E F I K M/6394/M/2 2 44 84,5** +,4/-,; 6*** +,/-,9 6,5 6 8 2 Ø 6 34 2 38,5 2 M/6395/M/2 6 5 2,5** +,4/-,; 7*** +,/-,8 8 8 3,5 Ø 8 38 28 43,5 23,5 M/6396/M/2 2 6 24,5** +,5/-,; 84*** +,/-,9,5 2 2 Ø 46 34 58 33 M/6397/M/2 25 66 45** +,5/-,; 94,5*** +,/-,9 2 4 26 Ø & 2 52 39 67,5 4 MDES Ø M P Q R S T U V W X Y Z M/6394/M/2 2,5 5 9,5 3,5 24 4 27 39 29 2 9 6 M/6395/M/2 6 4 5 3,5 27 5 32 45 34 2 9 9,5 M/6396/M/2 2 7,5-6 5 32,5 8 4 59 4 3 9 3 23 M/6397/M/2 25 8,5-6,5 35,5 44 69 49 3 9 3 25 MDES Ø D E F I J K kg M/6394/M/2 2 M5 M5 22,7 27 5 99 76 6 M4 2 3,23 M/6395/M/2 6 M5 M6 27,5 32,5 6 23 93 9,5 M5 23,5 3,4 M/6396/M/2 2 M5 M8 34 37 7 47 2 4 M6 29 45,76 M/6397/M/2 25 M5 M 4,5 44 84 69 24 4 M8 3 45, ** open *** closed -22
Sales and manufacturing facilities in 75 countries give us the global reach, understanding and capabilities that Norgren s global footprint customers look for Specialist technical centres are located in sia, England, ermany and the US. We have a global network of technical centres close to our key markets where skilled and experienced design and development engineers produce custom-built solutions to give our customers competitive advantage. With established manufacturing facilities globally Norgren has the manufacturing and support capabilities to be able to cope with the most demanding international projects. Drawing on many years of experience of handling major projects across national boundaries, Norgren can harness global resources to match its customers own operations. >> REWorld leading pneumatic and fluid control technologies lobal manufacturing and support With an established sales and service network in 75 countries, we have the reach and capability to ensure continuity of supply and local support where it is needed for customers involved in export markets or multi-site operations. Front-line sales and technical support engineers share our knowledge and skills with customers around the world. For details and information visit norgren.com