Designed by Specialists for Exceptional Performance
Experience Since 1933, Maes has been designing and producing superior milker inflations for the dairy industry. Maes designers know that dairy producers depend on their inflations for thorough, gentle, timely and consistent milkout, from cow to cow, from milking to milking, from the first day throughout the life of the inflation. Years of experience have trained us to pay attention to all the elements that go into an excellent milker inflation. The rubber/polymer mix must have the correct characteristics of strength, compression, smooth finish, and elasticity. From the mouth to the bore to the milk tube, inflation shape, size and dimension must be properly proportioned to allow problem-free flow between the cow and the milk collecting system. From cow to cow, from milking to milking, from the first day throughout the life of the inflation. Quality We are confident that the materials, manufacture, testing and quality control of Maes inflations are unsurpassed in the industry. Maes inflations are compounded of the finest quality raw materials, with an optimum level of natural rubber to balance milking speed with gentleness. Pure rubber is combined with polymers and additives which address specific needs. Some additives help the inflation resist distortion which age and milk fat can cause while others contribute to a smooth finish for cleanability or help to soften the material for enhanced suppleness and gentle milking. Our formulas aim to balance the characteristics of safety, performance and cleanability to satisfy our priorities in inflation design. The Maes manufacturing process assures quality at every stage. Only the highest standards are acceptable in raw material, personnel, equipment condition, and cleanliness. Maes practices aggressive quality control at every step to assure the producer s new set of inflations is identical to the set being replaced. Before coming to market, a new inflation, such as the Tri-Magna triangular inflation, is extensively field and lab tested for the all-important attributes of gentleness, performance, and quality. Innovation Maes is known as the Problem Solver in the inflation business because of our specialty in addressing specific problems such as drop-off, slippage or incomplete milkout. For example, the Magnaflex M226 has a bore which narrows down gradually to a wide milk tube resulting in a much smoother milk flow and less chance of back flow. Maes Tri-Magna styles, available for Surge, Delaval or Bou-Matic milking systems, combine our custom rubber blend formulation with an innovative triangular bore. This gives a uniform, gentle, three-sided rather than two-sided massage on the teat. The triangular bore improves grip especially toward the end of the milking period when the flattened empty teat is more susceptible to slips and drop-offs.
Anatomy of an Inflation the mouthpiece The opening at the top of the inflation should be the appropriate size for the cows. If the mouthpiece is too large, small teats can be sucked down into the bore. If too small, the inflation makes a poor attachment which can be costly in time, udder health, and lost milk. the head The head is designed to fit the milking shell snugly and securely in order to eliminate slips, squawks, and deforming. the vacuum chamber The space inside the head is proportioned to provide the correct reservoir of vacuum around the teat, resulting in a secure attachment. the bore The bore flexes with the vacuum pulsations to massage the teat and release the milk. This is where Maes super-soft formula is most appreciated in gentleness, cow comfort, and udder health. the rings Several Maes styles, including the M226 Magnaflex Inflation for Delaval 06 shell shown here, feature a series of three positions for shell fit. The first ring provides the least tension on the bore for good flex in low vacuum situations. The second position creates a little more tension and is good for cows with small teats. The third position provides the proper tension on the bore for top performance in high level vacuum systems. the milk tube A well-designed, tapered milk tube quickly carries the milk away without flooding the claw. the claw end Most styles of Maes inflations feature a reinforced claw end to minimize cuts caused by the rubber flexing against the stainless steel claw nipples. Claw end reinforcement contributes to longer life, lower replacement costs and higher profits.
The Maes story began in 1911 with Bob Maes, a young inventor working on a dairy farm with the crude milking equipment in use at the time. He visualized more practical, safe, and efficient ways to milk cows and he began to patent and produce inventions which soon proved their worth with top dairy herds. Over the years, the creative spirit of Bob Maes has been kept alive with innovations in design, materials and manufacturing processes. The Maes brand was acquired by The Coburn Co., Inc. of Whitewater, Wisconsin, in July of 1996. A family business with a long history of its own, Coburn has been manufacturing and distributing livestock supplies and milking equipment since 1925. Coburn has earned a reputation for superior customer service throughout its widespread dealer network. That reputation now stands solidly behind the Maes brand. Maes inflations are available for all major brands of milking equipment. Ask your dealer for more information about Maes inflations. Your Maes Dealer Maes Inflations are manufactured for THE COBURN CO., INC. P.O. Box 147 Whitewater, Wisconsin 53190 USA Phone: 262-473-2822 Fax: 262-473-3522 www.coburn.com
Maes is a registered trademark of THE COBURN COMPANY, INC. Delaval-style M227 Tri-Magna for 06 shell Triangular bore gives a three-sided massage for thorough milkout, good attachment, and gentleness. Flat smooth head has no ribs at top to trap bacteria. Replaces Milk-Rite TLC-D1. M700 SQUARE Inflation for 06 shell Square bore inflation has a 4- way collapsing action for most uniform massage and complete milk-out. M701 SQUARE Inflation with Air Vent for 06 shell Square bore inflation has a 4- way collapsing action for most uniform massage and complete milk-out. Includes small plastic air vent (p/n 4010001). M226 Magnaflex replaces 01, 08 for 06 shell A thin-wall high-capacity inflation. Lower positioning on the teat and extra tube length suit wide-uddered cows. M224 Style D Narrow Bore replaces 01 for 06 shell Firm mouthpiece and rounded dome for good teat and udder contact, reduced slippage. M220 Style D Medium Bore replaces 05 for 06 shell With large mouthpiece, ideal for large or swollen teats. M6000 Magnaflex replaces 08, 01AULT for 06 shell Special flex joint at top of milk tube for improved shape retention and best alignment under the udder. Head designed for secure teat contact. Works with all ranges of vacuum. M4000-1020 Magnaflex Narrow Bore replaces 01, 01U, 01AU for 06 shell Thin wall provides good teat massage. Suits low-line systems and DV- 300. Good for lower vacuum levels. Special fast-milking New Zealand style rubber formulation. Replacement for Conewango ID-01A.
BouMatic-style M411 Tri-Magna Narrow Bore for Standard S.S. Shell Triangular bore gives a three-sided massage producing gentle, thorough milkout and reduced slippage. Smooth domed head no ribs to trap bacteria. Replaces Milk-Rite TLC-B1. M406 DKBM replaces F1, R1, P1 for Standard S.S. Shell. Narrow bore has rings for tension adjustment. Head positions slightly higher on the teat. M5000 Magnaflex replaces B1U, R1, R1C for Standard S.S. Shell For high capacity claws. With more stable mouthpiece, it is ideal for low vacuum situations. Milk tube reinforcement is effective against claw cuts. M1000 Magnaflex replaces B1U, R1, R1C for Standard S.S. Shell Ideal for efficient milking in lower vacuum situations or where drop-off is a problem. Adjusting rings for tension on the bore. M410 replaces R2 for S.S. shell with plastic nipple This inflation works with the M409 Tube and is designed for best fit in the S.S. shell. Replacement for original R-2CS. M409 51/2 Tapered Reinforced Rubber Milk Tube Now improved with extra rubber at the tube end for strength and shape; used with M410.
Surge-style M286 Tri-Magna for Jet-Flo shell Tri-Magna triangular inflation gives three-sided massage for gentle, thorough milkout, and reduced slips and squawks. Ring-style reinforcement at milk tube helps resist claw cuts and aids shutoff. For Mini- Orbit, Eclipse or RX claw. Replaces Milk- Rite TLC-S1. M287 replaces 10060, 10062 for Jet- Flo shell Head is reinforced at mouthpiece and shoulder for greater stability. Longer milk tube with extra reinforcement to guard against claw cuts. Our exclusive compound features durability, gentle yet fast milking. M288 replaces 10060, 10062 for Jet-Flo shell The M288 has a slightly larger curved shape at the contact point with the shell bottom, and is a fraction longer than the M287. Features same exclusive rubber compound. M221 With Rings. Style A-S Narrow Bore replaces 10057, 10058, 10100, 10063 for Vacuum Saver shells For Breaker Cup or Mini- Cup claw. Flat dome head rides higher on the teat for good udder contact. Multiadjustable tension rings. M284 Without Rings. Style A-S replaces 10057, 10058, 10100, 10063 for Vacuum Saver shells For Breaker Cup or Mini- Cup claw. Flat dome head rides higher on the teat for good udder contact. M285 Style A-S replaces 10041, 10048, 10049 for Jet-Flo shell For Mini-Orbit, Eclipse or RX claw. Ring-style reinforcement at milk tube helps resist claw cuts, aids shut-off. M282 Style A-S Medium Bore replaces 10052, 10084 for Continental shell Large mouthpiece for largeteated cows.
Universal style Choreboy style M275 replaces 281, 282 for Visible shell Shorter milk tube with smaller I.D. For Fullview Claw. M274 Style U replaces 6R, 6S2, 26M, 6M for UNIV 2MS shell Narrow round bore positions correctly on the teat. Rings for adjusting tension on the bore. Smaller ID milk tube. Not a replacement for precollapsed design of original 6S. M215 CHC-KF replaces 12051 Kleen-Flo for narrow bore shell Long, reinforced milk tube for high capacity with flexibility. Streamlined head shape. Rings for tension adjustment on the bore. Collapsing Patterns of Milker Inflations Traditional Round Shape Triangular Shape Square Shape for two-way massage for three-way massage for four-way massage Maes is a registered trademark of THE COBURN COMPANY, INC. P.O. Box 147 Whitewater, Wisconsin 53190 USA Phone 262-473-2822 Fax 262-473-3522 www.coburn.com Toll-free Phone 1-800-776-7042 Fax 1-800-776-7044 MI2009