E+S Trench shoring systems / Sliding rail systems Single slide rail system Linear shoring Single-rail linear shoring with U-type and rectangular roller unit Module length Length slide rail Panel height Pipe culvert height 2,13 m - 6,38 m m 1,32 m / 2,32 m variable Linear shoring - no comparison With Linear shoring the soil on either side of the trench remains untouched, while there are no adverse effects on building foundations, not even if they are in the immediate vicinity of the excavation. No impairment of traffic flow, not even it if is moving right alongside the trench. Until the invention of Linear shoring such feats were considered unattainable. Linear shoring combines tried-and-tested functional principles with unconventional, innovative ideas to create a revolutionary new shoring system. A feature of the Linear shoring system is the replacement of the permanently positioned hinged spreaders, due to the ingeneous use of rigid boogie cars that act on the shoring panels in such way that the trench width is completely uniform troughout all stages of the installation. Vertically mobile, horizontally adjustable. The boogie cars mounted in the supports of the shoring system can be adjusted in height to match the increasing depth of the trench. The width of the frame is adapted by the spreader system to the desired trench width. A right to right angles. The mobile frame accurately ensures right angles in the trench. Everything is linearly aligned, always at exactly the same distance from the opposite side. In all phases of construction. That is the key to success. Because this means you can work more efficiently, faster and to a higher standard of quality whilst at the same time cutting costs appreciably. E+S Trench shoring systems / Sliding rail systems 1
I Linear shoring support l c Pipe culvert length II Boogie car b Shoring / trench width III Base panel b c Inner width IV Top panel h c Pipe culvert height l M Module length t pl Thickness Single-rail linear shoring with U-type or rectangular roller unit (All dimensions in mm. The details of length of pipe opening l c refer to the rectangular roller unit.) 2 E+S Trench shoring systems / Sliding rail systems
Linear shoring support 820 935 Linear shoring support, single slide rail 715,0 Linear shoring boogie car 832 200 832 205 Rectangular roller unit Linear shoring U-type boogie car 2,00 2,00 420,0 550,0 Base panels -inside- (height 2.32 m) 821 120 821 160 821 250 821 610 821 850 821 855 821 860 821 861 l M [m] 2,13 2,84 5,13 6,38 t p 516,0 650,0 730,0 840,0 965,0 1.185,0 1.505,0 1.880,0 6,03 7,05 8,44 9,02 9,58 11,34 14,22 176,00 90,00 65,50 45,20 39,40 81,00 58,10 36,60 Top panels -inside- (height 1.32 m) 822 060 821 180 822 120 822 620 822 760 822 783 822 800 822 801 l M [m] 2,13 2,84 5,13 6,38 t p 355,0 445,0 500,0 570,0 635,0 870,0 1.090,0 1.370,0 2,49 3,43 4,01 4,80 5,13 5,45 6,45 8,09 176,00 90,00 65,50 45,20 39,40 81,00 58,10 36,60 Top panels -inside- (height 2.30 m) l M [m] t p 822 065 2,13 822 155 2,84 822 180 822 680 822 780 822 785 Base panels -inside- with injection pipe (height 2.32 m) l M [m] t p 821 251 821 615 A 821 827 A Top panels -inside- with injection pipe (height 1.32 m) l M [m] t p 822 130 822 660 (The details of length of pipe opening l c refer to the rectangular roller unit.) 530,0 660,0 740,0 845,0 975,0 1.409,0 810,0 890,0 980,0 572,0 670,0 4,35 5,98 6,99 8,37 8,95 9,50 7,05 8,44 9,02 4,01 4,80 176,00 90,00 65,50 45,20 39,40 81,00 63,00 43,50 43,90 63,00 43,50 E+S Trench shoring systems / Sliding rail systems 3
Combinations of height The shoring wall height can be adapted to the necessary trench depth with different panel combinations. Please note that, up to the maximum height, reduced shoring depths can be obtained by overlapping the inner and outer panels. Extension bars for rectangular roller unit 830 005 830 010 830 011 830 012 830 015 830 020 830 030 830 075 830 125 830 300 830 305 0,140 0,275 0,350 0,375 0,412 0,550 1,100 1,650 2,200 3,300 4,400 38,0 50,0 55,0 57,0 60,0 70,0 110,0 152,0 192,0 278,0 358,0 Extension bars for U-type roller unit 831 503 831 500 831 507 831 510 831 520 831 530 831 540 l l M l c b b c t pl Length Module length Pipe culvert length Shoring / trench width Inner width Thickness A G G / VP d eh Area Weight Weight per shoring panel Diameter Earth pressure max. 0,140 0,275 0,375 0,550 1,100 1,650 2,200 77,0 95,0 115,0 130,0 207,0 286,0 362,0 4 E+S Trench shoring systems / Sliding rail systems
Trench widths Length extension bar [m] without extension bar 0,140 0,275 0,350 0,375 0,412 0,550 1,100 1,650 2,200 3,300 4,400 b c [m] 0,900 1,040 1,175 1,250 1,275 1,312 1,450 2,000 2,550 3,100 4,200 5,300 b [m] 1,280 1,420 1,555 1,630 1,655 1,692 1,830 2,380 2,930 3,480 4,580 5,680 Other trench widths possible by combining different extension bar lengths. Larger trench widths available on request. Accessories / Spares 842 758 842 752 842 753 842 749 842 759 842 751 834 080 336 960 862 200 834 100 834 110 842 099 842 100 IA 0150F IA 0210F 832 230 862 100 832 246 832 245 850 720 861 075 861 085 861 076 861 074 861 070 861 071 834 015 834 060 834 057 IB 0470F IB 0614F HE 0050 F HE 0060F Adapter for DKU piling frame, corner shoring, h = 0.50 m KDIV Adapter for DKU piling frame, corner shoring, h = 0.50 m KDVI Adapter for DKU piling frame, corner shoring, h = 1.00 m KDVI Adapter for DKU piling frame, h = 0.50 m KDVI (single slide rail, Adapter for DKU piling frame, h = 1.00 m KDIV (single slide rail, Adapter for DKU piling frame, h = 1.00 m KDVI (single slide rail) Adapter for EGS / DGS (LV) Bearing claw for DKU piling frame element Connector Cover panel for in-situ concrete DG -base panel- Cover plate for in-situ concrete DG -top plate- DKU piling frame guide frame DKU piling frame guide frame Nut M 24 Nut M 36 Pin Pin (for connector) Pin for roller unit (deep Linear shoring) Pin, Linear shoring (double slide rail) Pin, Linear shoring (single slide rail) Pressure beam (boxes, slide rail) Pressure beam (boxes, slide rail) Pressure plate for boogie car Pull adapter double slide rail Pull adapter single slide rail Screw M 24 x 80 Screw M 36 x 80 Spring cotter 6 mm Spring cotter 8 mm 0,750 1,000 2,27 3,81 0 0 0,300 0,300 4,60 5,80 1,60 2,35 2,80 3,40 47,0 55,0 94,0 45,0 40,0 75,5 105,0 40,0 6,9 7,9 9,9 105,0 175,0 0,1 0,4 1,4 0,8 4,6 3,2 2,5 425,0 525,0 175,5 236,0 271,0 318,0 12,4 43,6 30,8 0,4 1,0 0,03 0,1 d [m] 0,035 0,035 0,05 0,04 0,006 0,008 Standard DIN 934 DIN 934 DIN 933 DIN 933 DIN 11024 DIN 11024 E+S Trench shoring systems / Sliding rail systems 5
Accessories / Spares (contd.) 821 100 842 704 842 705 842 710 842 711 Suspension chain KL-13-8 Waling for DKU piling frame, module length 2.84 m (single slide rail, Waling for DKU piling frame, module length 3.88 m (single slide rail, Waling for DKU piling frame, module length 4.13 m (single slide rail, Waling for DKU piling frame, module length 4.38 m (single slide rail, 5,000 25,7 300,0 402,0 420,0 445,0 d [m] Standard l l M l c b b c t pl Length Module length Pipe culvert length Shoring / trench width Inner width Thickness A G G / VP d eh Area Weight Weight per shoring panel Diameter Earth pressure max. The details of length of pipe opening l c refer to the rectangular roller unit. 6 E+S Trench shoring systems / Sliding rail systems