JM Green Two-Part Urethane Insulation Adhesive (Part 1)

Similar documents
MBR Bonding Adhesive Activator

Sodium Potassium Aluminum Silicates

TopGard Base Coat. Version 0.1 Revision Date 02/12/2015 Print Date 05/29/2015

SeamFree PMMA Resin - Standard Grade

High Density Calcium Silicate Fire Resistant Boards

Biopersistent Special Purpose Fiber

SeamFree PMMA Cleaner

Version 1.4 Revision Date 10/19/2015 Print Date 12/01/2015. QIAGEN Str. 1 D Hilden

SeamFree PMMA Primer-High Traffic

PVC Adhesive. Version 1.3 Revision Date 05/15/2015 Print Date 07/21/2015. Trade name : Ceel-Co and/or Ceel-Tite Adhesive, Zeston Perma-Weld Adhesive

Pure Silica Fiber. Version 1.2 Revision Date 03/01/2016 Print Date 03/07/2016

Fiber Glass Blowing Wool

Fiber Glass Blowing Wool

3400B Series. Version 1.1 Revision Date 03/27/2018 Print Date 03/27/2018

Version 1.4 Revision Date 10/19/2015 Print Date 12/01/2015. QIAGEN Str. 1 D Hilden

Fiber Glass Insulation

OEM Insulation. Version 1.2 Revision Date 03/01/2016 Print Date 02/15/2017. Trade name : Range-Glas EQ, Spin-Glas WH EQ

Insulation Boards. Version 1.1 Revision Date 09/08/2015 Print Date 09/22/2015

SAFETY DATA SHEET DIGEST

SAFETY DATA SHEET PA1013 TM CA APLMNT DRIP 10.5 OZ 12/CS

Glass Filtration Media

SAFETY DATA SHEET. Disposal considerations : Dispose of wastes in an approved waste disposal facility.

Version 1.4 Revision Date 10/19/2015 Print Date 12/01/2015. QIAGEN Str. 1 D Hilden

: Sika Ferrogard 500 Crete

SikaSeal Acrylic 100 SAFETY DATA SHEET. Version 1.0 MSDS Number: Revision Date: SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

: Sika MonoTop -620 MY

Version 2.1 Revision Date 10/19/2015 Print Date 06/28/2016. QIAGEN Str. 1 D Hilden

: SikaSet Accelerator

SAFETY DATA SHEET SSS DRAIN MAINTAINER #2 (#05248)

Version 1.7 Revision Date 10/19/2015 Print Date 12/01/2015. QIAGEN Str. 1 D Hilden

SA Primer Low VOC. Version 1.3 Revision Date 12/27/2017 Print Date 12/27/2017

Cavex Patiki Road Avondale Auckland AKL 1026 :

: Sikanol M SAFETY DATA SHEET. Sikanol M. Version 1.0 SDS Number: Revision Date: 2017/06/01 SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

: : Category 2A. : Category 3 (Respiratory system) H319 Causes serious eye irritation. H335 May cause respiratory irritation.

: SikaFloor Marine KG-404 N

: Sika MaxMix Plasticiser

Version 4.0 SDS Number: Revision Date: SECTION 1: Identification of the hazardous chemical and of the supplier.

SAFETY DATA SHEET. Royco 44

: SikaCeram-255 StarFlex LD

SeamFree PMMA Textured Top Coat

MCB A-74 SAFETY DATA SHEET. Version 1.0 SDS Number: Revision Date: SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

: Specific target organ toxicity - single exposure : Category 3 (Respiratory system)

: SikaFume SAFETY DATA SHEET. SikaFume. Version 1.0 MSDS Number: Revision Date: SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

: Epoxylite C 6103 Hi Temp Hardener

SA Primer. Version 1.2 Revision Date 02/24/2016 Print Date 02/24/2016

: Sikafloor -81 EpoCem Comp.C

: Epoxylite C 6203 Hi Temp Hardener

Version 2.0 SDS Number: Revision Date: SECTION 1: Identification of the hazardous chemical and of the supplier

: SikaSeal Aquarium SAFETY DATA SHEET. SikaSeal Aquarium. Version 1.0 MSDS Number: Revision Date:

: Sika Air Detrainer P3

Sikaflex -552 AT Patiki Road Avondale Auckland AKL 1026 : H319 Causes serious eye irritation. H351 Suspected of causing cancer.

: Sika MonoTop -910 N

Revision Date 04/30/2012. Product name : D3 LIQUID CONC Relevant identified uses of the substance or mixture and uses advised against

: Sika CNI SAFETY DATA SHEET. Sika CNI. Version 1.0 SDS Number: Revision Date: SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

MSDS Number: : F

Version 2.0 MSDS Number: Revision Date: SECTION 1: Identification of the hazardous chemical and of the supplier

: Sika MonoTop -723 N

Sikaflex MS Patiki Road Avondale Auckland AKL 1026 :

Dibromofluoromethane Safety Data Sheet

: Sika -102 Waterplug

Healthbond 2300 Ultra Green Plus Carpet Tile Adhesive

1. PRODUCT AND COMPANY IDENTIFICATION 1.1 Product identifiers Product name : Syna-Epoxy 28E Bis(3,4-epoxycyclohexylmethyl) adipate

: Sikafloor Level-15 SAFETY DATA SHEET. Sikafloor Level-15. Version 1.0 SDS Number: Revision Date: 2017/08/31

1. IDENTIFICATION INFOTRAC (North America) 2. HAZARDS IDENTIFICATION. Physical State Liquid

SAFETY DATA SHEET Version 5.2 Revision Date 04/19/2016

Safety Data Sheet Radiator Coolant Dye 1, 8 oz

: Sikalastic -1K SAFETY DATA SHEET. Sikalastic -1K. Version 1.0 SDS Number: Revision Date:

: MR MUSCLE Bathroom & Toilet Cleaner

Version 1.0 MSDS Number: Revision Date: SECTION 1: Identification of the hazardous chemical and of the supplier.

JM TPO Edge Sealant. Version 1.1 Revision Date 11/15/2016 Print Date 02/14/2017

Glass Microfiber Nonwoven

: Sikadur -42 MP Normal/Slow Part C

: ECO SCREED RAPID (CONCENTRATE)

: SikaTite Moisture Seal 2K Part B

Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDS IDENTIFICATION. Version 1.2 Revision Date 11/4/2016.

Material Safety Data Sheet Version No.: 1 (Revision date : ) AccuPower CT Real-Time PCR Kit

: Sikafloor Marine Elastic

SAFETY DATA SHEET <#####> Dermoscent BIO BALM for Dogs Version 2.0 Revision Date 01/08/2015

SAFETY DATA SHEET. Section 1. IDENTIFICATION

: Sika Control 40 (NZ)

Sika Plug (NZ) Patiki Road Avondale Auckland AKL 1026 :

SAFETY DATA SHEET CITRA BOOST VERSION 2.1 REVISION DATE 05/24/2016

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.


: Sikaflex -400 Fire SAFETY DATA SHEET. Sikaflex -400 Fire. Version 1.0 SDS Number: Revision Date: 2017/07/24

: MR MUSCLE Shower Shine

: Sika Plug SAFETY DATA SHEET. Sika Plug. Version 1.0 SDS Number: Revision Date: SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

: Sika Block SAFETY DATA SHEET. Sika Block. Version 1.0 MSDS Number: Revision Date:

85-91 Patiki Road Avondale Auckland AKL 1026 :

Issue Date 01-Sept-2016 Revision Date: 10-Oct-2017 Version 1 1. IDENTIFICATION 2. HAZARDS IDENTIFICATION. Physical State Liquid

SIGMA-ALDRICH. SAFETY DATA SHEET Version 5.1 Revision Date 06/27/2014 Print Date 02/02/2016. form

: Sika BlackSeal Plus (NZ)

Issue Date: March 24, 2017 Revision Date: March 24, 2017 Version: PRODUCT AND COMPANY IDENTIFICATION

Version 1.1 SDS Number: Revision Date: SECTION 1: Identification of the hazardous chemical and of the supplier.

ENF MOUSE MAX GLU TRAP 4 Version 1.0 Revision Date 01/12/2017 Print Date 02/26/2019

Harmful if swallowed, in contact with skin or if inhaled

: SikaGrind MC-10 A MY-2

Safety Data Sheet. Issue Date: 14-Feb-2009 Revision Date: 09-Dec-2013 Version 1 1. IDENTIFICATION 2. HAZARDS IDENTIFICATION

Safety Data Sheet CE 1650 CERAMIC PASTE

Sikafloor Level Patiki Road Avondale Auckland AKL 1026 : H318 Causes serious eye damage.

Transcription:

SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Trade name : Manufacturer or supplier's details Company : Johns Manville Address : P.O. Box 5108 Denver, CO USA 80127 Telephone : 303-978-2000 8:00AM-5:00PM M-F Emergency telephone number : 1-800-424-9300 (Chemtrec, in English) Prepared by : productsafety@jm.com SECTION 2. HAZARDS IDENTIFICATION GHS Classification Acute toxicity (Inhalation) : Category 4 Skin irritation : Category 2 Eye irritation : Category 2A Respiratory sensitisation : Category 1 Skin sensitisation : Category 1 GHS Label element Hazard pictograms : Signal word Hazard statements Precautionary statements : Danger : H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H332 Harmful if inhaled. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H351 Suspected of causing cancer. : Prevention: P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray. P264 Wash skin thoroughly after handling. P271 Use only outdoors or in a well-ventilated area. P272 Contaminated work clothing should not be allowed out of the workplace. 1 / 9 US/EN

P280 Wear eye protection/ face protection. P280 Wear protective gloves. P281 Use personal protective equipment as required. P285 In case of inadequate ventilation wear respiratory protection. Response: P302 + P352 IF ON SKIN: Wash with plenty of soap and water. P304 + P340 + P312 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/ physician if you feel unwell. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308 + P313 IF exposed or concerned: Get medical advice/ attention. P333 + P313 If skin irritation or rash occurs: Get medical advice/ attention. P337 + P313 If eye irritation persists: Get medical advice/ attention. P362 Take off contaminated clothing and wash before reuse. Storage: P405 Store locked up. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Other hazards None known. SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS Hazardous components Chemical Name CAS-No. Concentration (%) Diphenylmethane 9016-87-9 >= 50 - < 70 101-68-8 >= 30 - < 50 SECTION 4. FIRST AID MEASURES General advice If inhaled In case of skin contact In case of eye contact : Move out of dangerous area. Show this safety data sheet to the doctor in attendance. Do not leave the victim unattended. : Call a physician or poison control centre immediately. If unconscious place in recovery position and seek medical advice. : If skin irritation persists, call a physician. If on skin, rinse well with water. If on clothes, remove clothes. : Remove contact lenses. Immediately flush eye(s) with plenty of water. Protect unharmed eye. 2 / 9 US/EN

Keep eye wide open while rinsing. If eye irritation persists, consult a specialist. If swallowed : Induce vomiting immediately and call a physician. Keep respiratory tract clear. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Take victim immediately to hospital. SECTION 5. FIREFIGHTING MEASURES Unsuitable extinguishing media Hazardous combustion products Specific extinguishing methods : High volume water jet : No hazardous combustion products are known : Standard procedure for chemical fires. Further information Special protective equipment for firefighters : Standard procedure for chemical fires. : Wear self-contained breathing apparatus for firefighting if necessary. SECTION 6. ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures Environmental precautions Methods and materials for containment and cleaning up : Use personal protective equipment. Ensure adequate ventilation. : Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities. : Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Keep in suitable, closed containers for disposal. SECTION 7. HANDLING AND STORAGE Advice on safe handling : Avoid formation of aerosol. Do not breathe vapours/dust. Avoid exposure - obtain special instructions before use. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Provide sufficient air exchange and/or exhaust in work rooms. 3 / 9 US/EN

Dispose of rinse water in accordance with local and national regulations. Persons susceptible to skin sensitisation problems or asthma, allergies, chronic or recurrent respiratory disease should not be employed in any process in which this mixture is being used. Conditions for safe storage : Keep container tightly closed in a dry and well-ventilated place. Observe label precautions. Electrical installations / working materials must comply with the technological safety standards. SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Components with workplace control parameters Components CAS-No. Value type (Form of exposure) Personal protective equipment Respiratory protection Control parameters / Permissible concentration Basis 101-68-8 TWA 0.005 ppm ACGIH TWA C C 0.005 ppm 0.05 mg/m3 0.02 ppm 0.2 mg/m3 0.02 ppm 0.2 mg/m3 : In the case of vapour formation use a respirator with an approved filter. NIOSH REL NIOSH REL OSHA Hand protection Remarks Eye protection Skin and body protection Hygiene measures : Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact). : Tightly fitting safety goggles Wear face-shield and protective suit for abnormal processing problems. : impervious clothing Choose body protection according to the amount and concentration of the dangerous substance at the work place. : Handle in accordance with good industrial hygiene and safety practice. When using do not eat or drink. When using do not smoke. Wash hands before breaks and at the end of workday. Written instructions for handling must be available at the work place. 4 / 9 US/EN

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Colour Odour Odour Threshold ph Melting point/freezing point : liquid : dark brown : aromatic Boiling point/boiling range : 200 F Flash point : 220 C Evaporation rate Flammability (solid, gas) Upper explosion limit Lower explosion limit Vapour pressure Relative vapour density Relative density : 1.22 Density Water solubility Solubility in other solvents Partition coefficient: n- octanol/water Auto-ignition temperature Thermal decomposition Viscosity, dynamic Viscosity, kinematic : 10.16 lb/gal SECTION 10. STABILITY AND REACTIVITY Reactivity : No decomposition if stored and applied as directed. 5 / 9 US/EN

Chemical stability Possibility of hazardous reactions Conditions to avoid : No decomposition if stored and applied as directed. : No decomposition if stored and applied as directed. SECTION 11. TOXICOLOGICAL INFORMATION Acute toxicity Acute inhalation toxicity : Acute toxicity estimate : 11 mg/l Exposure time: 4 h Test atmosphere: vapour Method: Calculation method Skin corrosion/irritation Remarks: May cause skin irritation and/or dermatitis. Serious eye damage/eye irritation Remarks: May cause irreversible eye damage. Respiratory or skin sensitisation Remarks: May cause sensitisation of susceptible persons by skin contact or by inhalation of aerosol or dust. IARC ACGIH OSHA NTP No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by ACGIH. No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by OSHA. No component of this product present at levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP. Further information Remarks 6 / 9 US/EN

SECTION 12. ECOLOGICAL INFORMATION Ecotoxicity Persistence and degradability Bioaccumulative potential Mobility in soil Other adverse effects Regulation Remarks Additional ecological information 40 CFR Protection of Environment; Part 82 Protection of Stratospheric Ozone - CAA Section 602 Class I Substances This product neither contains, nor was manufactured with a Class I or Class II ODS as defined by the U.S. Clean Air Act Section 602 (40 CFR 82, Subpt. A, App.A + B). SECTION 13. DISPOSAL CONSIDERATIONS Disposal methods Disposal of residual product Contaminated packaging : Do not dispose of waste into sewer. Do not contaminate ponds, waterways or ditches with chemical or used container. Send to a licensed waste management company. : Empty remaining contents. Dispose of as unused product. Do not re-use empty containers. SECTION 14. TRANSPORT INFORMATION International transport regulations Not a dangerous good in the meaning of international transport regulations. SECTION 15. REGULATORY INFORMATION TSCA list : Not relevant 7 / 9 US/EN

Not relevant EPCRA - Emergency Planning and Community Right-to-Know Act CERCLA Reportable Quantity Components CAS-No. Component RQ (lbs) Calculated product RQ (lbs) 101-68-8 5000 * *: Calculated RQ exceeds reasonably attainable upper limit. SARA 304 Extremely Hazardous Substances Reportable Quantity This material does not contain any components with a section 304 EHS RQ. SARA 302 : No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302. SARA 313 : The following components are subject to reporting levels established by SARA Title III, Section 313: Diphenylmethanediisocyan ate 9016-87-9 55 % 101-68-8 35 % Clean Air Act The following chemical(s) are listed as HAP under the U.S. Clean Air Act, Section 12 (40 CFR 61): 101-68-8 35 % This product does not contain any chemicals listed under the U.S. Clean Air Act Section 112(r) for Accidental Release Prevention (40 CFR 68.130, Subpart F). The following chemical(s) are listed under the U.S. Clean Air Act Section 111 SOCMI Intermediate or Final VOC's (40 CFR 60.489): 101-68-8 35 % California Prop 65 This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm. The components of this product are reported in the following inventories: TSCA : On TSCA Inventory DSL : All components of this product are on the Canadian DSL. SECTION 16. OTHER INFORMATION Further information Revision Date : 05/28/2015 8 / 9 US/EN

The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. 9 / 9 US/EN