MAKING MODERN LIVING POSSIBLE. Technical Information. Orbital Motor VMP. powersolutions.danfoss.com

MAKING MODERN LIVING POSSIBLE Technical Information Orbital Motor VMP powersolutions.danfoss.com

Revision History Table of Revisions Date Changed Rev Feb 214 New dimension drawings. Converted to Danfoss layout _ DITA CMS BA May 213 First version AA 2 L125287 Rev BA Feb 214

Contents A wide range of Orbital Motors Characteristic, features and application areas of Orbital Motors...5 Characteristic features of Danfoss Orbital Motors... 5 Technical features of Danfoss Orbital Motor...5 The Danfoss Orbital Motors are used in the following application areas:...6 Survey of literature with technical data on Danfoss Orbital Motors...6 Data survey Speed, torque and output Versions Technical data Shaft seal Pressure drop Oil flow Shaft load Function diagrams Shaft Port Introduction...7 VMP features... 7 Speed, torque and output...8 Versions and code numbers...1 Technical data for VMP... 11 Recommendation:...11 VMP with High Pressure Shaft Seal (HPS)...12 Pressure drop in motor... 13 Oil flow in drain line... 14 Direction of shaft rotation...14 Permissible shaft load...15 Function diagrams...16 VMP 5 function diagram... 16 VMP 8 function diagram... 17 VMP 1 function diagram...17 VMP 125 function diagram...18 VMP 16 function diagram...18 VMP 2 function diagram...19 VMP 25 function diagram...19 VMP 315 function diagram...2 Shaft version... 21 Port thread versions...23 Manifold mount VMP...23 Dimensions, VMP European version, cyl. 25 mm shaft, A2 flange and side ports VMP European version, cyl. 25 mm shaft, A2 flange... 24 Weight and dimensions... 25 Dimensions, VMP, cyl. 1 inch version, A2 flange and side ports VMP, cyl. 1 inch version, A2 flange...26 Weight and dimensions... 27 Dimensions, VMP SAE version, 1 inch splined shaft, A2 flange and side ports VMP SAE version, 1 inch splined shaft, A2 flange...28 Weight and dimensions... 29 Dimensions, VMP SAE version, cyl. 1 inch shaft, Woodruff key, A2 flange and side ports L125287 Rev BA Feb 214 3

Contents VMP SAE version, cyl. 1 inch shaft, Woodruff key, A2 flange...3 Weight and dimensions... 31 Dimensions, VMP SAE version, 1 inch splined shaft, C flange and side ports VMP SAE version, 1 inch splined shaft, C flange... 32 Weight and dimensions... 33 Dimensions, VMP SAE version, cyl. 1 inch shaft, Woodruff key, C flange and side ports VMP SAE version, cyl. 1 inch shaft, Woodruff key, C flange... 34 Weight and dimensions... 35 4 L125287 Rev BA Feb 214

A wide range of Orbital Motors Characteristic, features and application areas of Orbital Motors Danfoss is a world leader within production of low speed orbital motors with high torque. We can offer more than 3 different orbital motors, categorised in types, variants and sizes (incl. different shaft versions). The motors vary in size (rated displacement) from 8 cm³ [.5 in³] to 8 cm³ [48.9 in³] per revolution. Speeds range up to approx. 25 min -1 (rpm) for the smallest type and up to approx. 6 min -1 (rpm) for the largest type. Maximum operating torques vary from 13 N m [115 lbf in] to 27 N m [24. lbf in] (peak) and maximum outputs are from 2. kw [2.7 hp] to 7 kw [95 hp]. Characteristic features of Danfoss Orbital Motors Smooth running over the entire speed range Constant operating torque over a wide speed range High starting torque High return pressure without the use of drain line (High pressure shaft seal) High efficiency Long life under extreme operating conditions Robust and compact design High radial and axial bearing capacity For applications in both open and closed loop hydraulic systems Suitable for a wide variety of hydraulics fluids Technical features of Danfoss Orbital Motor The programme is characterised by technical features appealing to a large number of applications and a part of the programme is characterised by motors that can be adapted to a given application. Adaptions comprise the following variants among others: L125287 Rev BA Feb 214 5

A wide range of Orbital Motors Motors with corrosion resistant parts Wheel motors with recessed mounting flange OMP, OMR- motors with needle bearing OMR motor in low leakage version OMR motors in a super low leakage version Short motors without bearings Ultra short motors Motors with integrated positive holding brake Motors with integrated negative holding brake Motors with integrated flushing valve Motors with speed sensor Motors with tacho connection All motors are available with black finish paint The Danfoss Orbital Motors are used in the following application areas: Construction equipment Agricultural equipment Material handling & Lifting equipment Forestry equipment Lawn and turf equipment Special purpose Machine tools and stationary equipment Marine equipment Survey of literature with technical data on Danfoss Orbital Motors Detailed data on all Danfoss Orbital Motors can be found in our motor catalogue, which is divided into more individual subcatalogues: General information on Danfoss Orbital Motors: function, use, selection of orbital motor, hydraulic systems, etc. Technical data on small motors: OML and OMM Technical data on medium sized motors: OMP, OMR, OMH Technical data on medium sized motors: DH and DS Technical data on medium sized motors: OMEW Technical data on medium sized motors: VMP Technical data on medium sized motors: VMR Technical data on large motors: OMS, OMT and OMV Technical data on large motors: TMT Technical data on large motors: TMV A general survey brochure on Danfoss Orbital Motors gives a quick motor reference based on power, torque, speed and capabilities. 6 L125287 Rev BA Feb 214

Data survey Introduction VMP features By introducing the VMP, Danfoss is introducing an Orbital Motor in the new V-Series. In order to meet the demands for motors that have the right duty cycle and efficiency capabilities for a given function, Danfoss now has 3 Orbital Motor Series: T-Series The Highest Torque Leading performance with a long lifetime makes light work of the heaviest duties. Offering pressure capability up to 35 bar [576 psi] and high starting torque, the T-Series is the energy-efficient choice for the toughest working environments. O-Series The Flexible Choice The O-Series is flexible beyond compare. Delivering premium power across the board, these motors cover small to large, medium to heavy-duty needs with pressure capability up to 275 bar [399 psi]. Robust, reliable and designed to fulfill the latest emissions standards. V-Series The Core Solution The V-Series is your quality benchmark in the medium duty market. Based on proven technology, these reliable motors will reduce your overall system costs while adding value to your machine. Perfect for many tasks. High pressure shaft seal Proven orbital motor design 3-chamber motor design Suitable for medium and low duty L125287 Rev BA Feb 214 7

Speed, torque and output Speed, torque and output The bar diagrams, are useful for a quick selection of relevant motor size for the application. The final motor size can be determined by using the function diagram. The function diagrams are based on actual tests on a representative number of motors from our production. The diagrams apply to a return pressure between 5 and 1 bar [75 and 15 psi] when using mineral based hydraulic oil with a viscosity of 35 mm²/s [165 SUS] and a temperature of 5 C [12 F]. For further explanation concerning how to read and use the function diagrams, please consult the paragraph "Selection of motor size" in the technical information "General" 52L232. 8 L125287 Rev BA Feb 214

Speed, torque and output min -1 (rpm) 12 Max. Speed 1 8 6 4 2 lbf in 35 3 25 2 15 1 5 Nm 4 35 3 25 2 15 1 5 5 8 1 125 16 2 25 315 Max. Torque hp 16 kw 12 5 8 1 125 16 2 25 315 Max. Output 12 1 8 8 6 4 4 2 5 8 1 125 16 2 25 315 Intermittend values Continuous values P31 466 L125287 Rev BA Feb 214 9

Versions Versions and code numbers Versions Mounting flange 2 hole oval flange (A2 - flange) Square flange (C-flange) Spigot diameter Ø 82.5 mm [3.25 in] Ø 44.4 mm [1.75 in] Bolt circle diameter (BC) Shaft Thread in shaft Ø 16.4 mm [4.2 in] Cyl. 25 mm Parallel key DIN 6885 M8 18 [.71] deep Cyl. 1 in Parallel key BS 46 M8 18 [.71] deep Splined, 1 in SAE 6B 1/4-2 UNC 14 [.55] deep Cyl. 1 in, Woodruff key 1/4-2 UNC 14 [.55] deep Ø 82.5 mm [3.25 in] Splined 1 in SAE 6B 1/4-2 UNC 14 [.55] deep Cyl. 1 in, Woodruff key 1/4-2 UNC 14 [.55] deep Port size G 1/2 7/8-14 UNF 7/8-14 UNF 7/8-14 UNF 7/8-14 UNF 7/8-14 UNF Drain port G1/4 G1/4 7/16-2 UNF 7/16-2 UNF 7/16-2 UNF 7/16-2 UNF 7/16-2 UNF 7/16-2 UNF European version X X US version X X X X X X Check valve X X X X Painted Black X X Code numbers VMP 5 11118244 11118253 1112968 1112986 1114441 1) 11144814 1114486 1) 11144271 VMP 8 11118245 11118254 11129681 11129861 11144411 1) 11144815 11144861 1) 11144453 VMP 1 11118246 11118255 11129683 11129872 11144412 1) 11144816 11144862 1) 11144454 VMP 125 11118247 11118256 11129692 11129873 11144413 1) 11144817 11144863 1) 11144455 VMP 16 11118248 111151 11129693 11129874 11144414 1) 11144818 11144864 1) 11144456 VMP 2 11118249 11118257 11129716 11129875 11144415 1) 11144819 11144865 1) 11144457 VMP 25 1111825 11118258 11129717 11129876 11144416 1114482 11144866 1) 11144458 VMP 315 11118251 11118259 11129718 11129877 11144417 1) 11144821 11144867 11144459 1) To be defined on request 1 L125287 Rev BA Feb 214

Technical data Technical data for VMP Technical data for VMP with 25 mm, 1 in cylindrical and 1 in splined shaft Type Motorsize Geometric displacement cm³ [in³] Max. speed min -1 Max. torque Max. output Max. pressure drop Max. oil flow Max. starting pressure with unloaded shaft Min starting torque [rpm] Nm [lbf in] kw [hp] bar [psi] l/min [US gal/ min] bar [psi] at max. Press-drop Nm [lbf in] VMP 5 48.6 [2.97] VMP 8 77.8 [4.76] VMP 1 97.3 [5.95] VMP 125 125. [7.65] VMP 16 155.7 [9.53] VMP 2 194.6 [11.91] VMP 215 242.3 [14.83] cont. 1 73 6 465 365 295 235 185 int. 1) 11 915 73 57 46 365 295 235 cont. 77 [68] int. 1) 86 [76] cont. 7.3 [9.8] int. 1) 8. [1.7] cont. 125 [1815] int. 1) 14 [23] cont. 5 [13.2] int. 1) 55 [14.5] 1 [145] cont. 68 [6] int. 1) 76 [675] 125 [115] 14 [124] 9 [12.1] 11.5 [15.4] 125 [1815] 14 [23] 6 [15.9] 75 [19.8] 1 [145] 11 [975] 12 [16] 155 [133] 175 [155] 9 [12.1] 11.5 [15.4] 125 [1815] 14 [23] 6 [15.9] 75 [19.8] 1 [145] 135 [1195] 15 [133] 2 [177] 225 [199] 9 [12.1] 11.5 [15.4] 125 [1815] 14 [23] 6 [15.9] 75 [19.8] 1 [145] 175 [155] 195 [1725] 235 [29] 255 [2255] 8.4 [11.3] 1.6 [14.2] 12 [174] 13 [1885] 6 [15.9] 75 [19.8] 1 [145] 21 [186] 225 [199] 275 [2435] 31 [2745] 8 [1.7] 1.6 [14.2] 115 [167] 13 [1885] 6 [15.9] 75 [19.8] 7 [1] 25 [2215] 28 [248] 275 [2435] 385 [341] 6 [8.] 8.7 [11.7] 9 [135] 125 [1815] 6 [15.9] 75 [19.8] 7 [1] 245 [217] 34 [31] VMP 315 36.1 [18.73] 275 [2435] 37 [3275] 5 [6.7] 7 [9.4] 75 [19] 1 [145] 6 [15.9] 75 [19.8] 7 [1] 255 [2255] 34 [31] Type Max inlet pressure Max inlet pressure with drain line VMP 5-315 bar [psi] cont. 14 [23] 14 [23] int. 1) 16 [232] 16 [232] 1) Intermittent operation: the permissible values may occur for max. 1% of every minute. Recommendation: To assure best motor performance, run motor for approximatley one hour at 3% of rated pressure before running at full load. L125287 Rev BA Feb 214 11

Shaft seal VMP with High Pressure Shaft Seal (HPS) VMP with HPS and without drain connected: The shaft seal pressure equals the average of input pressure and return pressure. VMP with HPS and drain connected: The shaft seal pressure equals the pressure in the drain line. P seal = P in + P return 2 P31 696 P31 697 VMP with check valves and drain connected: The shaft seal pressure equals the pressure in the drain line. VMP with check valves and without drain connected: The shaft seal pressure equals the pressure in the return line + 1 bar [145 psi]. P31 698 P31 699 psi 36 bar 25 3 24 18 12 2 15 1 int. operation 1) 6 5 Ø25 mm-ø1 1 2 3 4 5 6 7 8 16 min -1 max. (rpm) P31 437 Please check motor pressure according to data under Technical data for VMP. 12 L125287 Rev BA Feb 214

Pressure drop Pressure drop in motor p p psi 4 35 3 25 2 15 1 5 bar 3 25 2 15 1 5 1 2 3 4 5 6 7 8 l/min Q 2 4 6 8 1 12 14 16 18 2 US gal/min Q The curve applies to an unloaded motor shaft and an oil viscosity of 35 mm²/s [165 SUS] P31 435 L125287 Rev BA Feb 214 13

Oil flow Oil flow in drain line The table shows the max. oil flow in the drain line at a return pressure less than 5-1 bar [75-15 psi]. Pressure drop bar [psi] Viscosity mm²/s [SUS] Oil flow in drain line l/min [US gal/min] 1 [145] 2 [1] 2.5 [.66] 35 [165] 1.8 [.78] 14 [23] 2 [1] 3.5 [.93] 35 [165] 2.8 [.74] Direction of shaft rotation 151-1836.1 L 14 L125287 Rev BA Feb 214

Shaft load Permissible shaft load The permissible radial shaft load (P R ) depends on n = Speed (min -1 ) L = Distance from the point of load to the mounting flange (mm, in) Permissible shaft load (P R ) - L in mm Permissible shaft load (P R ) - L in inch A2-flange 8 15 N* n 1 + L 8 133 lbf* n 3.94 + L C-flange 8 15 N* n 13 + L 8 133 lbf* n 4.6 + L * n 2 min -1 [rpm]; L 55 mm [2.2 in] n< 2 min -1 [rpm]; = > P Rmax = 4615 N [137 lbf] P R lbf 1 N 5 45 P R A2-flange 8 6 4 4 35 3 25 2 15 15 N [33 lfb] 2 N [44 lbf] 2 1 5 1 2 3 4 5 6 7 8 9 1 min -1 (rpm) 3 [1.18] C-flange 27 [1.6] P31 721 L125287 Rev BA Feb 214 15

Function diagrams Function diagrams Explanation of function diagram use, basis and conditions can be found under Speed, torque and output. Light grey = Continuous range Light red = Intermittent range (max. 1% operation every minute) Intermittent pressure drop and oil flow must not occur simultaneously. VMP 5 function diagram lbf in Nm 1 VMP 5 Q=5 l/min [1.3 US gal/min] 1 l/min [2.6 US gal/min] 2 l/min [5.3 US gal/min] 3 l/min [7.9 US gal/min] 4 l/min [1.6 US gal/min] 5 l/min [13.2 US gal/min] 55 l/min [14.5 US gal/min] 8 9 7 6 5 4 3 2 8 7 6 5 4 3 2 N=1kW 2kW 4kW 6kW N=1hp 2hp 4hp 6hp 8hp η t =73% 7% 8kW 1hp p= 14 bar [23 psi] 125 bar [1815 psi] 9 bar [135 psi] 6 bar [87 psi] 1 1 6% η t =5% p= 3 bar [44 psi] 2 4 6 8 1 12 min -1 (rpm) P31 467 16 L125287 Rev BA Feb 214

Function diagrams VMP 8 function diagram lbf in 14 Nm 16 VMP 8 Q=5 l/min [1.3 US gal/min] 1 l/min [2.6 US gal/min] 2 l/min [5.3 US gal/min] 3 l/min [7.9 US gal/min] 4 l/min [1.6 US gal/min] 5 l/min [13.2 US gal/min] 6 l/min [15.9 US gal/min] 7 l/min [18.5US gal/min] Q=75 l/min [19.8 US gal/min] 12 1 8 14 12 1 8 N=1kW 2kW 4kW 6kW 8kW 1kW N=1hp 2hp 4hp 6hp 8hp 1hp N=12hp p= 14 bar [23 psi] 125 bar [1815 psi] 6 6 9 bar [135 psi] 4 2 4 2 η t =74% 73% 7% 6% η t =5% 6 bar [87 psi] p= 3 bar [44 psi] 1 2 3 4 5 6 7 8 9 1 min -1 (rpm) P31 468 VMP 1 function diagram lbf in Nm 2 VMP 1 Q=5 l/min [1.3 US gal/min] 1 l/min [2.6 US gal/min] 2 l/min [5.3 US gal/min] 3 l/min [7.9 US gal/min] 4 l/min [1.6 US gal/min] 5 l/min [13.2 US gal/min] 6 l/min [15.9 US gal/min] 7 l/min [18.5US gal/min] Q=75 l/min [19.8 US gal/min] 16 18 14 12 1 8 6 4 2 16 14 12 1 8 6 4 2 N=1kW 2kW 4kW 6kW 8kW 1kW N=1hp 2hp 4hp 6hp 8hp 1hp N=12hp η t =74% 73% 7% 6% η t =5% p= 14 bar [23 psi] 125 bar [1815 psi] 9 bar [135 psi] 6 bar [87 psi] p= 3 bar [44 psi] 1 2 3 4 5 6 7 8 min -1 (rpm) P31 469 L125287 Rev BA Feb 214 17

Function diagrams VMP 125 function diagram lbf in 2 Nm 24 VMP 125 Q=5 l/min [1.3 US gal/min] 1 l/min [2.6 US gal/min] 2 l/min [5.3 US gal/min] 3 l/min [7.9 US gal/min] 4 l/min [1.6 US gal/min] 5 l/min [13.2 US gal/min] 6 l/min [15.9 US gal/min] 7 l/min [18.5US gal/min] Q=75 l/min [19.8 US gal/min] 16 2 16 N=1kW 2kW 4kW 6kW 8kW 1kW N=1hp 2hp 4hp 6hp 8hp 1hp N=12hp p= 14 bar [23 psi] 125 bar [1815 psi] 12 8 4 12 8 4 η t =74% 73% 7% 6% η t =5% 9 bar [135 psi] 6 bar [87 psi] p= 3 bar [44 psi] 5 1 15 2 25 3 35 4 45 5 55 6 min -1 (rpm) P31 47 VMP 16 function diagram lbf in 24 2 16 Nm 28 24 2 16 VMP 16 Q=5 l/min [1.3 US gal/min] 1 l/min [2.6 US gal/min] N=1kW 2kW 2 l/min [5.3 US gal/min] 3 l/min [7.9 US gal/min] 4kW 4 l/min [1.6 US gal/min] 5 l/min [13.2 US gal/min] 6 l/min [15.9 US gal/min] N=1hp 2hp 4hp 6hp 8hp 1hp N=12hp 6kW 8kW 7 l/min [18.5US gal/min] Q=75 l/min [19.8 US gal/min] 1kW p= 13 bar [1885 psi] 12 bar [174 psi] 12 12 9 bar [135 psi] 8 4 8 4 η t =74% 73% 7% 6% η t =5% 6 bar [87 psi] p= 3 bar [44 psi] 5 1 15 2 25 3 35 4 45 5 min -1 (rpm) P31 471 18 L125287 Rev BA Feb 214

Function diagrams VMP 2 function diagram lbf in 3 Nm 35 VMP 2 Q=5 l/min [1.3 US gal/min] 1 l/min [2.6 US gal/min] 2 l/min [5.3 US gal/min] 3 l/min [7.9 US gal/min] 4 l/min [1.6 US gal/min] 5 l/min [13.2 US gal/min] 6 l/min [15.9 US gal/min] 7 l/min [18.5US gal/min] Q=75 l/min [19.8 US gal/min] 25 2 3 25 2 N=1kW N=1hp 2kW 2hp 4hp 4kW 6hp 6kW 8hp 8kW 1hp 1kW N=12hp p= 13 bar [1885 psi] 12 bar [174 psi] 15 15 9 bar [135 psi] 1 5 1 5 η t =74% 73% 7% 6% η t =5% 6 bar [87 psi] p= 3 bar [44 psi] 5 1 15 2 25 3 35 4 min -1 (rpm) P31 472 VMP 25 function diagram lbf in Nm 45 VMP 25 Q=5 l/min [1.3 US gal/min] 1 l/min [2.6 US gal/min] 2 l/min [5.3 US gal/min] 3 l/min [7.9 US gal/min] 4 l/min [1.6 US gal/min] 5 l/min [13.2 US gal/min] 6 l/min [15.9 US gal/min] 7 l/min [18.5US gal/min] Q=75 l/min [19.8 US gal/min] 35 3 25 4 35 3 N=1kW 2kW N=1hp 2hp 4kW 4hp 6hp 6kW 8hp 8kW 1hp 1kW N=12hp p= 125 bar [1815 psi] 2 15 1 5 25 2 15 1 5 η t =74% 73% 7% 6% η t =5% 9 bar [135 psi] 75 bar [188 psi] 6 bar [87 psi] p= 3 bar [44 psi] 25 5 75 1 125 15 175 2 225 25 275 3 325 min -1 (rpm) P31 473 L125287 Rev BA Feb 214 19

Function diagrams VMP 315 function diagram lbf in 35 3 25 Nm 4 32 VMP 315 Q=5 l/min [1.3 US gal/min] 1 l/min [2.6 US gal/min] N=1hp N=1kW 2hp 2 l/min [5.3 US gal/min] 2kW 3 l/min [7.9 US gal/min] 4hp 4kW 4 l/min [1.6 US gal/min] 6hp 5 l/min [13.2 US gal/min] 6hp 6 l/min [15.9 US gal/min] 8hp 7 l/min [18.5US gal/min] N=1hp Q=75 l/min [19.8 US gal/min] p= 1 bar [1445 psi] 2 15 1 5 24 16 8 η t =74% 73% 7% 6% η t =5% 75 bar [188 psi] 6 bar [87 psi] 3 bar [44 psi] p= 15 bar [218 psi] 25 5 75 1 125 15 175 2 225 25 min -1 (rpm) P31 474 2 L125287 Rev BA Feb 214

Shaft Shaft version EU version A: Cylindrical shaft 45 43.4 [1.79] 42.4 [1.669] min. 18 [.71] max. 6 [.24] 25 mm D: Parallel key A 8 x 7 x 32 DIN 6885 A Ø28.57 [1.125] Ø28.55 [1.124] A A 32. [1.26] 31.7 [1.248] M8 Ø25.2 [.985] Ø25. [.984] 6.4 [.252] 4.4 [.173] 28. [1.12] 27.7 [1.9] A-A 8. [.315] 7.964 [.314] D P31 667 EU version B: Cylindrical shaft 45 43.4 [1.79] 42.4 [1.669] min. 18 [.71] max. 6 [.24] 1 in E: Parallel key 1/4 x 1/4 x 1 1/4 in B.S. 46 B Ø28.57 [1.125] Ø28.55 [1.124] A A 31.75 [1.25] 31.45 [1.238] M8 Ø25.4 [1.] Ø25.38 [.999] 5.5 [.217] 3.5 [.138] 28.19 [1.11] 27.93 [1.1] A-A 6.4 [.252] 6.35 [.25] E P31 668 US version A: Cylindrical shaft 1 in F: Woodruff key 1/4 1 in SAE J52 C ø28.57 [1.125] ø28.55 [1.124] 27 25 4.6 [1.598] 39.3 [1.547] A 14 [.55] 16 [.63] 1/4-2 UNC Ø25.4 [1.] Ø25.38 [.999] 28.31 [1.115] 28.3 [1.14] A-A R.65 [.26] R.35 [.14] A 19 [.75] 18 [.71] 6.38 [.251] 6.35 [.25] F P31 669 L125287 Rev BA Feb 214 21

Shaft US version G: Splined shaft 4.6 [1.598] 39.3 [1.547] 14 [.55] 16 [.63] 1 in SAE 6B * Deviates from B.S. 259 (SAE 6B) G ø28.57 [1.125] ø28.55 [1.124] 27 25 A 1/4-2 UNC Ø25.35 [.998] Ø25.3 [.996] *6.275 [.247] *6.21 [.244] A-A *21.54 [.848] *21.4 [.843] R.65 [.26] R.35 [.14] R35 [1.38] A 25.4 [1.] 24.4 [.961] 6x6 P31 67 22 L125287 Rev BA Feb 214

Port Port thread versions A B min. 15 [.59] max. Ø21. [.827] G max. 1. [.4] Ø3.5 [1.2] Ø29.5 [1.161] H min. 16.7 [.657] P31 671 P31 672 A: G main ports G: ISO 228/1 - G1/2 B: UNF main ports H: 7/8-14 UNF O-ring boss port D F Ø18.5 [.728] Ø17.5 [.689] E min. 1. [.393] max..6 [.24] J min. 1. [.393] P31 671 P31 671 D: G drain port E: ISO 228/1 - G1/4 F: UNF drain port J: 7/16-2 UNF O-ring boss port Manifold mount VMP European version 36 [1.42] 38 [1.496] 2 [.79] 2 [.79] E 2 [.79] 2 [.79] 18 [.71] 18 [.71] E: M8; 13 [.51] deep (4 pcs) P31 54 L125287 Rev BA Feb 214 23

Dimensions, VMP European version, cyl. 25 mm shaft, A2 flange and side ports VMP European version, cyl. 25 mm shaft, A2 flange Ø82.55[3.25] Ø82.45[3.246] Ø28.56[1.124] Ø25.15[.9848] Ø25.2[.9843] D E C 16.4[4.19] 51. [2.1] max 98[3.86] Ø13.55[.53] * L. max max 6.[.24] 74[2.91] 38[1.5] 12.1[.48] max 55.3[2.18] 5.5[.22] 36[1.42] max Ø91.6[3.66] max 133.3[5.25] P31 69 C: Drain connection G 1/4; Min. 1 [.39] deep D: G 1/2; Min 15 [.59] deep E: M8; 13 [.51] deep (4 pcs) 24 L125287 Rev BA Feb 214

Dimensions, VMP European version, cyl. 25 mm shaft, A2 flange and side ports Weight and dimensions Type *L max mm [in] Weight kg [lb] VMP 5 max 132. [5.2] 4.9 [1.8] VMP 8 max 136. [5.35] 5. [11.] VMP 1 max 138.5 [5.45] 5.2 [11.5] VMP 125 max 142.2 [5.6] 5.3 [11.7] VMP 16 max 146.3 [5.76] 5.5 [12.1] VMP 2 max 151.5 [5.96] 5.7 [12.6] VMP 25 max 158. [6.22] 5.9 [13.] VMP 315 max 166.5 [6.56] 6.2 [13.7] L125287 Rev BA Feb 214 25

Dimensions, VMP, cyl. 1 inch version, A2 flange and side ports VMP, cyl. 1 inch version, A2 flange Ø28.56[1.124] Ø25.4[1.] Ø25.38[.999] Ø82.55[3.25] Ø82.45[3.246] 16.4[4.19] 51. [2.1] max 98[3.86] Ø13.55[.53] * L. max 74[2.91] 38[1.5] 12.1[.48] max 55.3[2.18] 5.5[.22] D E C max 6.[.24] 36[1.42] max Ø91.6[3.66] max 133.3[5.25] P31 691 C: Drain connection 7/16-2 UNF; Min. 1 [.39] deep D: Port connection 7/8-14 UNF; 16.7 [.66] deep E: M8; 13 [.51] deep (4 pcs) 26 L125287 Rev BA Feb 214

Dimensions, VMP, cyl. 1 inch version, A2 flange and side ports Weight and dimensions Type *L max mm [in] Weight kg [lb] VMP 5 max 132. [5.2] 4.9 [1.8] VMP 8 max 136. [5.35] 5. [11.] VMP 1 max 138.5 [5.45] 5.2 [11.5] VMP 125 max 142.2 [5.6] 5.3 [11.7] VMP 16 max 146.3 [5.76] 5.5 [12.1] VMP 2 max 151.5 [5.96] 5.7 [12.6] VMP 25 max 158. [6.22] 5.9 [13.] VMP 315 max 166.5 [6.56] 6.2 [13.7] L125287 Rev BA Feb 214 27

Dimensions, VMP SAE version, 1 inch splined shaft, A2 flange and side ports VMP SAE version, 1 inch splined shaft, A2 flange Ø25.35[.998] Ø25.3[.996] Ø82.6[3.25] Ø82.4[3.24] 16.4[4.19] max 98[3.86] Ø13.55[.53] * L. max 74 [2.91] 38 [1.5] max 52[2.5] D E C 36[1.42] max 6.[.24] max Ø91.6[3.66] 51.[2.1] 12.1[.48] 5.5[.22] max 133.3[5.25] P31 692 C: Drain connection 7/16-2 UNF; Min. 1 [.39] deep D: Port connection 7/814 UNF; 16.7 [.66] deep E: M8; 13 [.51] deep (4 pcs) 28 L125287 Rev BA Feb 214

Dimensions, VMP SAE version, 1 inch splined shaft, A2 flange and side ports Weight and dimensions Type *L max mm [in] Weight kg [lb] VMP 5 max 132. [5.2] 4.9 [1.8] VMP 8 max 136. [5.35] 5. [11.] VMP 1 max 138.5 [5.45] 5.2 [11.5] VMP 125 max 142.2 [5.6] 5.3 [11.7] VMP 16 max 146.3 [5.76] 5.5 [12.1] VMP 2 max 151.5 [5.96] 5.7 [12.6] VMP 25 max 158. [6.22] 5.9 [13.] VMP 315 max 166.5 [6.56] 6.2 [13.7] L125287 Rev BA Feb 214 29

Dimensions, VMP SAE version, cyl. 1 inch shaft, Woodruff key, A2 flange and side ports VMP SAE version, cyl. 1 inch shaft, Woodruff key, A2 flange Ø25.4[1.] Ø25.38[.999] Ø82.6[3.25] Ø82.4[3.24] 16.4[4.19] Ø13.55[.53] * L. max max 6.[.24] 74[2.91] 38[1.5] 12.1[.48] max 52[2.5] 5.5[.22] D E C 36[1.42] max Ø91.6[3.66] max 98[3.86] 51.[2.1] max 133.3[5.25] P31 693 C: Drain connection 7/16-2 UNF; Min. 1 [.39] deep D: Port connection 7/8-14 UNF; 16.7 [.66] deep E: M8; 13 [.51] deep (4 pcs) 3 L125287 Rev BA Feb 214

Dimensions, VMP SAE version, cyl. 1 inch shaft, Woodruff key, A2 flange and side ports Weight and dimensions Type *L max mm [in] Weight kg [lb] VMP 5 max 132. [5.2] 4.9 [1.8] VMP 8 max 136. [5.35] 5. [11.] VMP 1 max 138.5 [5.45] 5.2 [11.5] VMP 125 max 142.2 [5.6] 5.3 [11.7] VMP 16 max 146.3 [5.76] 5.5 [12.1] VMP 2 max 151.5 [5.96] 5.7 [12.6] VMP 25 max 158. [6.22] 5.9 [13.] VMP 315 max 166.5 [6.56] 6.2 [13.7] L125287 Rev BA Feb 214 31

Dimensions, VMP SAE version, 1 inch splined shaft, C flange and side ports VMP SAE version, 1 inch splined shaft, C flange Ø44.45[1.75] Ø44.35[1.746] Ø25.35[.998] Ø25.3[.996] max 6[.24] * L. max max 49[1.93] 77[3.3] 41[1.61] 36[1.42] max Ø91.6[3.66] max 82[3.22] Ø82.55[3.25] max 98[3.77] 2.6[.1] max 82[3.23] D E C 51.[2.1] F P31 694 C: Drain connection 7/16-2 UNF; Min. 1 [.39] deep D: Port connection 7/8-14 UNF; 16.7 [.66] deep E: M8; 13 [.51] deep (4 pcs) F: 3/8-16 UNC 26.5 [1.4] deep (4 pcs) 32 L125287 Rev BA Feb 214

Dimensions, VMP SAE version, 1 inch splined shaft, C flange and side ports Weight and dimensions Type *L max mm [in] Weight kg [lb] VMP 5 max 134.9 [5.31] 4.9 [1.8] VMP 8 max 138.8 [5.46] 5. [11.] VMP 1 max 141.4 [5.57] 5.2 [11.5] VMP 125 max 145.1 [5.71] 5.3 [11.7] VMP 16 max 149.2 [5.87] 5.5 [12.1] VMP 2 max 154.4 [6.8] 5.7 [12.6] VMP 25 max 16.9 [6.33] 5.9 [13.] VMP 315 max 169.3 [6.67] 6.2 [13.7] L125287 Rev BA Feb 214 33

Dimensions, VMP SAE version, cyl. 1 inch shaft, Woodruff key, C flange and side ports VMP SAE version, cyl. 1 inch shaft, Woodruff key, C flange Ø44.45[1.75] Ø25.4[1.] Ø44.35[1.746] Ø25.38[.999] * L. max 77[3.3] 41[1.61] 2.6[.1] D E C 36[1.42] max Ø91.6[3.66] max 82[3.22] Ø82.55[3.25] 51.[2.1] max 98[3.77] max 82[3.23] max 49[1.93] max 6[.24] F P31 695 C: Drain connection 7/16-2 UNF; Min. 1 [.39] deep D: Port connection 7/8-14 UNF; 16.7 [.66] deep E: M8; 13 [.51] deep (4 pcs) F: 3/8-16 UNC 26.5 [1.4] deep (4 pcs) 34 L125287 Rev BA Feb 214

Dimensions, VMP SAE version, cyl. 1 inch shaft, Woodruff key, C flange and side ports Weight and dimensions Type *L max mm [in] Weight kg [lb] VMP 5 max 134.9 [5.31] 4.9 [1.8] VMP 8 max 138.8 [5.46] 5. [11.] VMP 1 max 141.4 [5.57] 5.2 [11.5] VMP 125 max 145.1 [5.71] 5.3 [11.7] VMP 16 max 149.2 [5.87] 5.5 [12.1] VMP 2 max 154.4 [6.8] 5.7 [12.6] VMP 25 max 16.9 [6.33] 5.9 [13.] VMP 315 max 169.3 [6.67] 6.2 [13.7] L125287 Rev BA Feb 214 35

Products we offer: Bent Axis Motors Closed Circuit Axial Piston Pumps and Motors Displays Electrohydraulic Power Steering Electrohydraulics Hydraulic Power Steering Integrated Systems Joysticks and Control Handles Microcontrollers and Software Open Circuit Axial Piston Pumps Orbital Motors PLUS+1 GUIDE Proportional Valves Sensors Steering Transit Mixer Drives Danfoss Power Solutions is a global manufacturer and supplier of high-quality hydraulic and electronic components. We specialize in providing state-of-the-art technology and solutions that excel in the harsh operating conditions of the mobile off-highway market. Building on our extensive applications expertise, we work closely with our customers to ensure exceptional performance for a broad range of off-highway vehicles. We help OEMs around the world speed up system development, reduce costs and bring vehicles to market faster. Danfoss Your Strongest Partner in Mobile Hydraulics. Go to www.powersolutions.danfoss.com for further product information. Wherever off-highway vehicles are at work, so is Danfoss. We offer expert worldwide support for our customers, ensuring the best possible solutions for outstanding performance. And with an extensive network of Global Service Partners, we also provide comprehensive global service for all of our components. Please contact the Danfoss Power Solution representative nearest you. Comatrol www.comatrol.com Schwarzmüller-Inverter www.schwarzmuellerinverter.com Turolla www.turollaocg.com Valmova www.valmova.com Hydro-Gear www.hydro-gear.com Daikin-Sauer-Danfoss www.daikin-sauer-danfoss.com Local address: Danfoss Power Solutions US Company 28 East 13th Street Ames, IA 51, USA Phone: +1 515 239 6 Danfoss Power Solutions GmbH & Co. OHG Krokamp 35 D-24539 Neumünster, Germany Phone: +49 4321 871 Danfoss Power Solutions ApS Nordborgvej 81 DK-643 Nordborg, Denmark Phone: +45 7488 2222 Danfoss Power Solutions (Shanghai) Co. Ltd. Building #22, No. 1 Jin Hai Rd Jin Qiao, Pudong New District Shanghai, China 2126 Phone: +86 21 3418 52 Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved. L125287 Rev BA Feb 214 www.danfoss.com Danfoss A/S, 214