IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction. The most updated information on this Certificate of Listing is available online at pld.iapmo.org Effective Date: May 2017 Void After: May 2018 100 N. Broadway 6th Floor Wichita, KS 67202 Identification: Each fitting, tube and pipe shall be permanently marked with the manufacturer's name or trademark, nominal size. The product shall also have the UMC certification mark. Characteristics: Products covered here include fittings, tube, and pipe with press or nail connection ends combined with other types of connections (e.g., threaded, soldered, and push fit). The press and nail connections are made with(a) copper or copper alloy fittings and Type K, L, and M copper tube; (b) carbon steel fittings and Schedule 10 and 40 carbon steel pipe; or (c) stainless steel fittings and Schedule 5, 10, and 40 stainless steel pipe. Carbon steel fittings and pipe covered by this Standard are not intended to be used in plumbing systems. The fittings shall be installed in accordance with the manufacturer's instructions and the latest edition of the Uniform Mechanical Code. Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory's compliance to the applicable requirements of ISO/IEC 17025. This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material, manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing. Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc. Any alteration of this certificate could be grounds for revocation of the listing. This document shall be reproduced in its entirety.
Products are in compliance with the following code(s): Uniform Mechanical Code (UMC ) Products are in compliance with the following standard(s): IAPMO PS 117-2012ae1
MODELS: Mega Press Carbon Steel Coupling P x P with stop 4815 25000 1/2 22005 3/4 25010 1 25015 1-1/4 25025 2 Carbon Steel Coupling P x P Without Stop 4815.5 25030 3/4 25035 3/4 25040 1 25045 1-1/4 25050 1-1/2 25055 2 Carbon Steel Adapter P x M 4811 25100 3/4 x 3/4 M 25105 3/4 x 3/4 M 25110 1 x 1 M 25115 1-1/4 x 1-1/4 M 25120 1-1/2 x 1-1/2 M 25125 2 x 2 M Carbon Steel Adapter P x F 4812 25130 3/4 x 3/4 F 25135 3/4 x 3/4 F 25140 1 x 1 F 25145 1-1/4 x 1-1/4 F 25150 1-1/2 x 1-1/2 F 25155 2 x 2 F 25575 3/4 x 3/4 F 25580 1 x 3/4 F 25585 1 x 3/4 F 25590 1-1/4 x 3/4 F 25595 1-1/4 x 3/4 F 25600 1-1/4 x 1 F 25605 1-1/2 x 3/4 F Page 3 of 6
25610 1-1/2 x 3/4 F 25615 1-1/2 x 1 F 25620 1-1/2 x 1-1/4 F 25625 2 x 3/4 F 25630 2 x 3/4 F 25635 2 x 1 F 25640 2 x 1-1/4 F 25645 2 x 1-1/2 F Carbon Steel Elbow 90 deg. P x P 4816 25200 3/4 25205 3/4 25210 1 25215 1-1/4 25220 1-1/2 25225 2 Carbon Steel Elbow 90 deg. FTG x P 4816.1 26050 3/4 26055 3/4 26060 1 26065 1-1/4 26070 1-1/2 26075 2 Carbon Steel Elbow 45 deg. P x P 4826 25230 3/4 25235 3/4 25240 1 25245 1-1/4 25250 1-1/2 25255 2 Carbon Steel Elbow 45 deg. FTG x P 4826.1 26100 3/4 26105 3/4 26110 1 26115 1-1/4 26120 1-1/2 26125 2 Page 4 of 6
Carbon Steel Tee P x P x P 4818 25300 3/4 25305 3/4 25310 1 25315 1-1/4 25320 1-1/2 25325 2 25330 3/4 x 3/4 x 3/4 25335 1 x 1 x 3/4 25340 1 x 1 x 3/4 25350 1-1/4 x 1-1/4 x 1 25360 1-1/2 x 1-1/2 x 3/4 25365 1-1/2 x 1-1/2 x 3/4 25370 1-1/2 x 1-1/2 x 1 25375 1-1/2 x 1-1/2 x 1-1/4 25380 2 x 2 x 3/4 25385 2 x 2 x 3/4 25390 2 x 2 x 1 25395 2 x 2 x 1-1/4 25400 2 x 2 x 1-1/2 Carbon Steel Tee P x P x F 4817.2 25405 3/4 x 3/4 x 3/4 F 25480 3/4 x 3/4 x 3/4 F 25410 1 x 1 x 3/4 F 25415 1 x 1 x 3/4 F 25485 1-1/4 x 1-1/4 x 3/4 F 25435 1-1/2 x 1-1/2 x 3/4 F 25440 1-1/2 x 1-1/2 x 3/4 F 25445 1-1/2 x 1-1/2 x 1 F 25450 1-1/2 x 1-1/2 x 1-1/4 F 25455 2 x 2 x 3/4 F 25460 2 x 2 x 3/4 F 25465 2 x 2 x 1 F 25470 2 x 2 x 1-1/4 F 25475 2 x 2 x 1-1/2 F Carbon Steel Union P x P Page 5 of 6
4860 25700 3/4 25705 3/4 25710 1 25715 1-1/4 25720 1-1/2 25725 2 Carbon Steel Flange P x BP 4859.5 25760 3/4 25765 3/4 25770 1 25775 1-1/4 25780 1-1/2 25785 2 Carbon Steel Reducer FTG x P 4815.1 26000 3/4 x 3/4 26005 1 x 3/4 26010 1 x 3/4 26015 1-1/4 x 1 26020 1-1/2 x 3/4 26025 1-1/2 x 1 26030 1-1/2 x 1-1/4 26035 2 x 1 26040 2 x 1-1/4 26045 2 x 1-1/2 Carbon Steel Cap P 4856 25730 3/4 25735 3/4 25740 1 25745 1-1/4 25750 1-1/2 25755 2 Page 6 of 6