PRODUCT DATA SHEET (ver.02/ ) One flap non return valves ( mm) Double flaps non return valves ( mm)

Similar documents
Wastewater combination air valve in stainless steel AISI 316 Mod. SCS

DAV - WP DAV - WP. Wastewater Air Valves. Product Catalogue. (Wastewater Air Valves) DAV - WP

CAST IRON SAFETY VALVE TYPE 6301

Ball Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300 DN 40, 50, 65

Ball Float Steam Trap UNA 43 PN 16/CL 125/JIS 10K UNA 46 PN 40/CL 150/CL 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6"

Product Manual B-Safety ClassicLine & PremiumLine Emergency Eyewash and Eye/Face Wash Equipment

Lecture 10 : Sewer Appurtenances

Aeration and vent valve BE 891

aeration and mixing systems

USER MANUAL. 1. Principle of operation. 2. Delivery condition. SPRING-LOADED SAFETY VALVES zarmak. Edition: 07/2016 Date: V (ex.

Neotecha SAPRO - Aseptic sampling valve SV Installation, operation and maintenance instructions

SYSTEM REGULATING VALVES PRESSURE RELIEF VALVE - SRV BRASS & S/STEEL ADJUSTABLE

Water. VAG DUOJET Automatic Air Valve Single-chamber type PN 10/16/25/40 - DN KAT-A 1912

Pressure relief valve

Technical Information Cleanfit CUA451

UCA-UVO-UCB. SUBMERSIBLE PUMPS Lifting of polluted water Commercial use 2 pole - 50 Hz OPERATING LIMITS APPLICATIONS CHARACTERISTICS ADVANTAGES

Pneumatic Outflow Control

Pressure relief valve DHV 716 set range: 0,5-10,0 bar

Installation, commissioning and servicing instructions

IP DEFINITIONS. Technical Notes. Definitions. IPXX Code

Combination Air Valve

INDUSTRIAS IBAIONDO, HYDROPNEUMATIC TANKS

Self-operated Pressure Regulators for special applications

6-5 Maintenance Manual

10.2. Basketball Single Post System

Installation, commissioning and servicing instructions

2-port seat valves PN25 with externally threaded connections

HYQUEST SOLUTIONS PTY LTD INSTRUCTION MANUAL TIPPING BUCKET RAIN GAUGE MODEL TB6

M A B MAB INFLATABLE GASKET SLIDE VALVES SERIES TSV FOR POWDERED AND GRANULAR SOLID MATERIALS

Pressure relief valve

Two-port valves, male threaded, PN25

Operation Manual. PEGAS NovoTap, PEGAS NovoTap+

A new concept in the storage of liquefied chemical and petrochemical gases Zero leakage Zero fugitive emissions

Self-operated Pressure Regulators Type 2405 Pressure Reducing Valve

Remeha Quinta Cascade guide

Pressure Reducing Valve DMV 750 set range: bar

Supratec Gesellschaft für Umweltund Verfahrenstechnik mbh OXYFLEX - M T / M T M E M B R A N E D I S C D I F F U S ER AERATION TECHNOLOGY

Materials : Brass body dezincification-resistant up to DN1 1/4

Poollift Delphin. Version: February, 2015 MANUAL AND OPERATING INSTRUCTIONS

Installation & Instruction Manual For Portable Series R.O. units:

Calculation tables for thermal expansion.

LIQUID LEVEL GAUGE FOR WELDING ZGAU 716 O&M, 717 O&M, 718 O&M, 719 O&M

Order No Projection Backboard

Pressure relief valve DHV 725 set range: 0,2-10,0 bar

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body

T 2523 EN Type 2406 Excess Pressure Valve Self-operated Pressure Regulators ANSI version

OPERATING MANUAL CHEMTRAC 840M MANUAL RETRACTABLE PROCESS HOLDER

Slide and Turn System SF25

DAV - MP DAV - MP. Metallic-Shield Air Valves. Product Catalogue. (Metallic-Shield Air Valves) DAV - MP

Rapidmain Installation Guide

Type 4708 Supply Pressure Regulator

Anti-flood device Model B-1

Pressure Reducing Valve DMV 755

AE50S Automatic Air and Gas Vent for Liquid Systems Installation and Maintenance Instructions

INGRESS PROTECTION RATIO IP

STAD. Balancing valves DN 15-50

Modelling of Pressurised Pipes within InfoWorks ICM and CS

GAS PRESSURE REGULATORS AP

PTF4 Pivotrol Pump (patented) version Dual Mechanism - Pressure Powered Pump

3/2-way valve, Series CD07 Qn= 1400 l/min pipe connection compressed air connection output: G 1/4 - M14x1,5 suitable for ATEX

Type 4708 Supply Pressure Regulator

Experiment Instructions. Circulating Pumps Training Panel

Series 44 Self-operated Pressure Regulators. Type 44-1 B Pressure Reducing Valve. Type 44-6 B Excess Pressure Valve

BRAKE WINCH RUP 503-[T/BT] EQUIPMENT FOR LIFTING LOADS. AT 053-[T/BT] xx

TECHNICAL DATA ANTI-FLOOD DEVICE MODEL B-1 1. DESCRIPTION

Sempell High Pressure Forged Check Valves Forged steel, swing check and tilting disc configuration

Self-operated Pressure Regulators Type Universal Pressure Reducing Valve

Pressure relief valve DHV 712 DN 65-80: 0,5-10 bar, DN : 0,3-4 bar, DN 100: 0,5-6 bar

SEQUENTIAL SHOWER VALVE INSTRUCTION MANUAL PLEASE LEAVE THIS MANUAL WITH THE END USER

Slide and Turn System SF35

A soft sealed atmospheric safety valve with large flow capacity and soft seat tightness for steam condenser and turbine applications

Expert Hydrostatic Level Transmitters

Installation, operation & maintenance manual - original version

Instructions for Installation, Operating and Maintenance

Target disk flowmeter Series DP. Instructions manual DP65 DP500. R-MI-DP Rev.: 4 English version

10.2. Basketball Single Post System

WARNING! Equipment for treatment of water intended for human consumption (Directive 98/83 CE).

6301 TYPE CAST IRON SAFETY VALVES

TECHNICAL DATA. TRIMPAC Model B-5 & B-5B

Float operated valve TYPE (SWDS)

Model C Pipe Line Strainer 6, 8 & 10 Inch (DN150, DN200 & DN250) 250 psi (17,2) General Description. Technical Data. Page of 6 MAY, 2006 TFP1644

Installation, Operating and Maintenance Instructions. V914 Cast Iron Flanged Swing Check Valve V914

Pressure Independent Control Series

DN 65 to 100 R.F. PN10 flanges + 5 C + 65 C Max Pressure : 10 Bars Specifications : Brass check valve Controlable With valves DN1/2

Pressure Reducing Valve for Steam Type 2333 A

HM and HM34 Inverted Bucket Steam Traps Installation and Maintenance Instructions

TECHNICAL DATA. Trimpac 251a. Spetember 16, 2013

22. Specialty Valves.

HL Article. Air admittance valves DN50 DN75

Flamco Flamco-Fill STA Flamco-Fill STM

for Building facilities Industrial facilities etc.,multipurpose Pilot operated type(high capacity)

INSTALLATION INSTRUCTIONS PUSH BAR PULLMAN PANIC BOLT DEVICE TO EN 1125 : 2008

Operating Instructions in compliance with Pressure Equipment Directive 2014/68/EU. FAS Brass Check Valve RDL

Automatic Balancing Valve Pressure difference controller with integrated flow limiter AB-PM DN

VORTEX REGULATOR Type WAB (UCY / CY-F / CE/V)

Description. Functions. Technical data. Applications. Tests. On-Off 2 levels float control valve, closing at high level and opening at low level.

Armatures for analytical probes

Installation, commissioning and servicing instructions

Mounting instructions for digger tollo

Series 44 Self-operated Pressure Regulators. Type 44-0 B Pressure Reducing Valve. ANSI version

Transcription:

PRODUCT DATA SHEET (ver.02/02.2018) One flap non return valves (50-200 mm) Double flaps non return valves (110-200 mm) End non-return valve (110-160mm) 1. Name Single, double and end non-return valves. 2. Characteristics and intended use of the product Non-return valves intended for installation on horizontal sections of pipework in drainage catch pit both outside and inside buildings. Non-return valves are backwater and flooding protection. The valves protect a building from backwater of drain system. The valves operate automatically allowing free drainage of rain water according to the slope of a drain system channel Capricorn has the following types of non-return valves on its offer: rain water dedicated backwater valve Type I, II and IV. Site 1 of 8

3. Design One flap non return valves 1. ABS body 2. ABS cover 3. Lever manual closing 4. Cover seal 5. Cover fixing screws 6. Closing flap 7. Flap hinge 8. Connection socket with a seal Double flaps non return valves 1. ABS body 2. ABS cover 3. Lever manual closing 4. Cover seal 5. Cover fixing screws 6. Closing flap 7. Closing flap End non-return valve 1. Closig flap/ stainless steal 2. Cover 3. ABS body Site 2 of 8

4. Principle of operation and exemplary application Natural flow of rain water. Rain backwater called backflow Drain backwater valves are additionally equipped with a manually-operated flap closing lever. Such a lever is used during longer periods of absence of users or in cases when flaps are required to be closed. 5. Dimensions One flap non return valves: Product code Dimensions [mm] A B C Figure 9-5010-050-00-03-03 50 132 92 140 9-5000-050-00-03-03 50 87 92 169 Site 3 of 8

9-5000-100-00-03-11 100 220 200 285 9-5000-110-00-03-11 110 200 190 310 9-5000-125-00-03-11 125 270 200 400 9-5000-160-00-03-11 160 260 235 340 9-5000-200-00-03-00 200 353 304 560 Site 4 of 8

Double flaps non return valves Product code Dimensions [mm] A B C Figure 9-5020-110-00-03-11 110 195 205 395 9-5020-125-00-03-11 125 188 209 440 9-5020-160-00-03-11 160 273 304 577 9-5020-200-00-03-11 200 353 304 560 End non-return valve Product code 9-5030-110-00-03-11 110 9-5030-160-00-03-11 160 Dimensions [mm] A B C 156 145 122 200 195 145 Figure Site 5 of 8

6. Technical parameters and materials used Type of Material Technical Parameter Body ABS - Cover ABS - Seal Gum - Flap ABS or PP/Stainless steal - Fixing screws Stainless steal - Maximum Pressure - 0,5 bar Maximum Temperature - 95 0 C Type of wastewater - Run-off water/wastewater Recommended minimal dimensions of backwater valve wells Backwater valve diameter Dimensions Armstrong Junction* [mm] Manhole** [mm] One flap non return valves 100 A-220, B-200, C-285 450 1000 110 A-200, B-190, C-310 450 1000 125 A-270, B-200, C-400 600 1000 160 A-260, B-235, C-340 450 1000 200 A-353, B-304, C-560 800 1000 Double Flap Backwater Valve 110 A-195, B-205, C-395 600 1000 125 A-188, B-209, C-440 600 1000 160 A-273, B-304, C-577 800 1000 200 A-353, B-304, C-560 800 1000 *Recommended at the installation depth of 0,80m ** Recommended at the installation depth >0,80m 7. Codes Code Name Material One flap non return valves 9-5010-050-00-03-03 One flap non return valve 50 ABS 9-5000-050-00-03-03 One flap non return valve 50 with vertical outflow ABS 9-5000-100-00-03-11 One flap non return valve 100 ABS 9-5000-110-01-03-11 One flap non return valve 110 ABS 9-5000-110-01-01-11 One flap non return valve 110 PP PP 9-5000-125-00-03-11 One flap non return valve 125 ABS 9-5000-160-00-03-11 One flap non return valve 160 ABS 9-5000-160-00-01-11 One flap non return valve 160 PP PP 9-5000-200-00-03-00 One flap non return valve 200 ABS Double flaps non return valves 9-5020-110-00-03-11 Double flaps non return valve 110 ABS 9-5020-125-00-03-11 Double flaps non return valve 125 ABS 9-5020-160-00-03-11 Double flaps non return valve 160 ABS 9-5020-200-00-03-11 Double flaps non return valve 200 ABS Site 6 of 8

End non return valve 9-5030-110-00-03-11 End non return valve 110 ABS 9-5030-160-00-03-11 End non return valve 160 ABS 8. Logistic data Product code Unit packages Pallet 2,0m Quantity (pieces/ packages) Weight Quantity of unit packages Quantity of collective packages Weight [kg] [pcs.] [pcs.] [kg] 9-5010-050-00-03-03 1 0,25 500 20 158 9-5000-050-00-03-03 1 0,26 500 20 161 9-5000-100-00-03-11 1 1,3 104-155 9-5000-110-01-03-11 1 1,4 104-155 9-5000-125-00-03-11 1 2,23 56-152 9-5000-160-00-03-11 1 2,3 70-181 9-5000-200-00-03-00 1 7,4 16-119 9-5020-110-00-03-11 1 2,05 80-180 9-5020-125-00-03-11 1 2,49 56-160 9-5020-160-00-03-11 1 5,75 24-153 9-5020-200-00-03-11 1 8,35 16-141 9-5030-110-00-03-11 1 0,46 - - - 9-5030-160-00-03-11 1 0,6 - - - 9. Packaging 10. Norms PN-EN 13564 PN-EN 1455 Site 7 of 8

11. Advantages non-return valves effectively protect buildings from backwater (backflow) of rain water of drain system, reliable and maintenance-free, non-return valves are equipped with automatic closing system that starts to operate when backwater appears, non-return valves are equipped with emergency manually-operated closing system, non-return valves effectively protect a building from unpleasant odors getting inside a building when drain and sewerage systems are not used for longer periods, non-return valves reduce the risk of rodents getting inside a building through drain and sewerage systems, non-return valves are made of materials of high resistance to aggressive substances, non-return valves provide easy method of cover removing for performance of periodic maintenance of flaps, non-return valve body design reduces the risk of solid waste formation blocking, in this way, the flap inside the body. 12. Warranty and extent of liability During the installation it is required to observe OHS rules included in building regulations and norms. Capricorn S.A. More information about warranty and extent of liability on www.capricorn.pl/en 13. Manufacturer Capricorn S.A. 58-160 Świebodzice, Ciernie 11 tel./fax +48/74/854 05 16 www.capricorn.pl/en e-mail: capricorn@capricorn.pl Products, texts, pictures, drawings and diagrams presented in this document may be changed by Capricorn S.A.without prior notification and without giving a reason. Please visit our web site www.capricorn.pl/en for more detail. Site 8 of 8