MATERIAL SAFETY DATA SHEET

Similar documents
MATERIAL SAFETY DATA SHEET

MSDS CODE: ADDRESS: NFPA HAZARD IDENTIFICATION DEGREE OF HAZARD HAZARD RATINGS EMERGENCY TELEPHONE NO.:

3. HEALTH INFORMATION AND PROTECTION

MATERIAL SAFETY DATA SHEET

3. HEALTH INFORMATION AND PROTECTION

3. HEALTH INFORMATION AND PROTECTION

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Air Tool Lubricant MSDS. Air Tool Lubricant. (800) (Poison Control USA) 24 Hours (800) (CHEMTREC) 24 Hours. Not Applicable - Mixture

MATERIAL SAFETY DATA SHEET

2. Composition and Information on Ingredients Ingredient CAS Number Weight % ACGIH TLV PEL STEL Petroleum Hydrocarbons

Refined Glycerine Kosher 99.50% Minimum CAS No

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

SECTION 2 COMPOSITION / HAZARDOUS INGREDIENTS INFORMATION INGREDIENT WT % TLV / PEL* CAS # 9-OCTADECEN

MATERIAL SAFETY DATA SHEET C-MUL SUN DRILLING PRODUCTS CORP.

Hazard Communication Standard Safety Data Sheet Nature's Way Sweeping Compound, Red Oil-based

* HMIS CODE ratings are estimated by Epoxy Technology. II. HAZARDOUS INGREDIENTS CAS# WT % TOXICITY DATA

Carolina Narrow Fabric Company

Product: Casting Wax Revision Date: 11/11/2015 SECTION 1 - IDENTIFICATION

GHS Classification: 1. PRODUCT AND COMPANY IDENTIFICATION. Product Identity: Crude Glycerin Chemical Name: 1,2,3-propanetriol

Material Safety Data Sheet

HI-TEMP FOOD GRADE. Food Grade Anti-Seize Compound SAFETY DATA SHEET SECTION 1: IDENTIFICATION

14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK H20E, Part A BILLERICA, MA 01821

MATERIAL SAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION 2. COMPOSITION/INFORMATION ON INGREDIENTS

Ferris File-A-Wax Green

MATERIAL SAFETY DATA SHEET

Safety Data Sheet. Address GHS Precautions If skin irritation occurs: Get medical advice/attention

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

1. Product And Company Identification. ARMOR ALL Air Freshening Protectant Pure Linen

Safety Data Sheet (SDS) Revision / Review Date: 5/27/2015

SAFETY DATA SHEET Lead Stop

Safety Data Sheet. Tuxton Select Full Synthetic 0W20 API SN/GF-5

SAFETY DATA SHEET B-415 VER 15-1 DATE: 3/31/15 24 HOUR TELEPHONE NUMBER (CHEMTREC)

MATERIAL SAFETY DATA SHEET

MSDS Cover Sheet 004/16802/02MSDS SEDISPERSE A-12, (1-L) BOTTLE 004/16802/02MSDS. X of 5

MATERIAL SAFETY DATA SHEET

Gulf Compressor Synthetic DE Lubricant

Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Revision date: 11/11/2015

Material Safety Data Sheet

Sodium Lauroyl Sarcosinate

GulfTEC Synthetic Motor Oil 0W-20

SAFETY DATA SHEET 1. IDENTIFICATION 2. HAZARDS IDENTIFICATION. Product Identifier. Additional Identification Product Code: Synonyms: 19015

SAFETY DATA SHEET. Product Name: LIQUID SEAWEED CONCENTRATE #3. Page 1 of 5. Classification of the Substance or Mixture. Label Elements.

Issue Date: 01-Jun-2010 Revision Date: 10-Sep-2015 Version 1 1. IDENTIFICATION MSH-32, MSH-1, MSH HAZARDS IDENTIFICATION

: Focus GC 55 Glass & Window Cleaner

MATERIAL SAFETY DATA SHEET

: GC 55 Glass & Window Cleaner

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET. Revision Number: 3

: Presto Neutral Deodorant Cleaner

Label Elements. Chemical Name CAS Concentration Synthetic PAG Base Oil Proprietary 75-90% Non-hazardous materials Proprietary <30%

Cen-Pe-Co Hy-Torque Gear Lube Red With Temp Tac Page 1 of 5 05/01/08 MATERIAL SAFETY DATA SHEET

AST PENETRANT II SAFETY DATA SHEET Section 1- Product and Company Identification

Issue Date Revision Date Version 19-Sep Aug PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET. CU-8120 Enzyme & bacteria digestive powder. None. (800) (800) Category 5 Category 3 Category 2B

Safety Data Sheet. Tuxton Trust Dexron VI

CYCLO INDUSTRIES, INC MATERIAL SAFETY DATA SHEET

AST-PENETRANT II Bulk SAFETY DATA SHEET Section 1- Product and Company Identification

PREMIUM LITHIUM COMPLEX

Safety Data Sheet. 503 Main Street Belle Chasse, LA 70037

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

IDQ Operating, Inc. 44 Old Ridgebury Road Suite 300 Danbury, CT Tel Product And Company Identification

S A F E T Y D A T A S H E E T

SAFETY DATA SHEET SECTION 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING LEATHER CLEANING & CONDITIONING CREAM

Ingredient Name: Severely Hydrotreated Heavy Naphthenic Petroleum Oil

SAFETY DATA SHEET. AccuStandard, Inc SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Identifiers

1. Chemical Product and Company Identification. 2. Hazardous Ingredients. 3. Hazards Identification

Safety Data Sheet MEDSPA BABY BATH

MATERIAL SAFETY DATA SHEET

BT-701. Advanced Chemical Technology, Inc. SAFETY DATA SHEET Version 1.0 Effective Date: 06/01/15 1. PRODUCT AND COMPANY IDENTIFICATION

1. Product And Company Identification

Issue Date: 10-Jul-2013 Revision Date: 23-Mar-2015 Version 2 1. IDENTIFICATION. United 29 FRESH AIR LOCK. Urinal and Drain Treatment.

SILICONES, INC. SAFETY DATA SHEET P-20B. Industrial mold making. Not for internal or medical use.

MATERIAL SAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION 2. COMPOSITION/INFORMATION ON INGREDIENTS

Safety Data Sheet SOOTHE & COOL CORNSTARCH BODY POWDER

Safety Data Sheet. Tuxton Synthetic Gear Oil 75W90

Version /28/2006

MATERIAL SAFETY DATA SHEET PE Page 1 of 5 Issued 05/10

MATERIAL SAFETY DATA SHEET 2. COMPOSITION/INFORMATION ON INGREDIENTS

PREMIUM EP-2 GREASE SAFETY DATA SHEET Section 1- Product and Company Identification

Material Safety Data Sheet

RUST TREATMENT Converter / Primer SAFETY DATA SHEET Section 1- Product and Company Identification

: Dust Mop H2O. SECTION 1: Identification. SECTION 2: Hazard(s) identification. SECTION 3: Composition/Information on ingredients

Material Safety Data Sheet Product No Cresyl Violet Acetate, Certified. Issue Date ( ) Review Date ( )

Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

SAFETY DATA SHEET. Great Lakes Orthodontics 200 Cooper Ave Tonawanda, NY CHEMTREC:

GLENIUM 3000 (FORMERLY: RHEOBUILD 3000FC; PS1140 ADMIXTURE)

Material Safety Data Sheet

Product Name: Spray Compound. Revision Date: August, 23 rd 2018 Issue Date: November 15, Product and Company Identification

Transcription:

MATERIAL SAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION TRADE NAME: Distributor: Lamplight Farms ADDRESS: 4900 North Lilly Road, (800) 645-5267 262-781-9590 (8:00 AM- 4:30 PM CST) M-F EMERGENCY NUMBER: 1-800-308-7141 (Prosar) 2. COMPOSITION / INFORMATION ON INGREDIENTS Components CAS Number Weight % Polyethylene 9002-88-4 0-99% Paraffin Wax 8002-74-2 0-99% Hydrogenated Palm Oil 68514-74-9 0-99% Citronella oil 8000-29-1 1% See Section 8 for Exposure Guidelines and Section 15 for OSHA Classification 3. HAZARDS IDENTIFICATION Potential Health Effects EYES: This product is minimally irritating to the eyes upon direct contact. Only in its molten form will cause thermal burns and eye injury upon direct contact. Based on testing of similar products and/or components. SKIN: This product is not expected to cause any skin irritation upon direct single or repeated and prolonged contact; however, similar chemical composition products applied to the skin of laboratory animals resulted in minimal to slight dermal irritation. Contact with molten material can cause severe burns. INHALATION: Breathing fumes in confined areas can cause respiratory discomfort and possible irritation. This product has a low vapor pressure and is not expected to present an inhalation hazard at ambient conditions. Caution should be taken to prevent aerosolization or misting of this product. Exposures below 5 mg/m3 appear to be without significant health risk. See Section 8 for oil mist exposure limits. INGESTION: This product is relatively non-toxic by ingestion unless aspiration occurs. This product has laxative properties and may result in abdominal cramps and diarrhea. - 1 -

4. FIRST AID MEASURES EYE CONTACT: Immediately flush eyes with large amounts of water and continue flushing until irritation subsides. If material is hot, treat for thermal burns and seek immediate medical attention. SKIN CONTACT: Remove contaminated clothing. If material is hot, submerge injured area in cold water. If victim is severely burned, remove to a hospital immediately. INHALATION: Remove individual to a well ventilated area for fresh air and call a physician if respiratory symptoms warrant medical attention. This material has a low vapor pressure and is not expected to present an inhalation exposure at ambient conditions. INGESTION: Do not induce vomiting due to aspiration hazard. If vomiting should occur, lower head below knees to avoid aspiration. Seek immediate medical attention. 5. FIRE AND EXPLOSION INFORMATION Flammable Properties FLASH POINT / METHOD: AUTOIGNITION TEMPERATURE: EXTINGUISHING MEDIA: >300F (>148 C) (CC) No Data Available. Use dry chemical, foam, or carbon dioxide. FIRE FIGHTING MEASURES / SPECIAL FIRE FIGHTING PROCEDURES: Water may be ineffective but can be used to cool containers exposed to heat or flame. Caution should be exercised when using water or foam as frothing may occur, especially if sprayed into containers of hot, burning liquid. UNUSUAL FIRE AND EXPLOSION CONDITIONS: Dense smoke may be generated while burning. Carbon monoxide, carbon dioxide, and other oxides may be generated as products of combustion. 6. ACCIDENTAL RELEASE MEASURES Consult Health Effect Information in Section 3, Personal Protection Information in Section 8, Fire and Explosion Information in Section 5, and Stability and Reactivity Information in Section 10. Remove all sources of ignition. - 2 -

REGULATORY NOTIFICATIONS: Notify appropriate authorities of spill. CONTAINMENT AND CLEAN UP: Handle as a thermoplastic. With molten spills, allow the material solidify and cool. Contain spill immediately. Do not allow spill to enter sewers or watercourses. Large spills may be picked up using shovels, buckets, or other means and placed in drums or other suitable containers. 7. HANDLING AND STORAGE Avoid breathing vapors or mist. Avoid contact with eyes. Avoid prolonged or repeated contact with skin. Wash thoroughly after handling. Wash clothing prior to reuse. May be slippery when spilled. Fire extinguishers should be kept readily available. See NFPA 30 and OSHA 1910.106--Flammable and Combustible Liquids. STORAGE: When kept in molten state, inert gas blanketing may be used to avoid material degradation. As a solid, avoid contamination by keeping in closed containers. Do not transfer to unmarked containers. Store in closed containers away from heat, sparks, open flame, or oxidizing materials. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Use this product in well-ventilated areas. This product does not contain any components with OSHA or ACGIH exposure limits. If oil mist is generated, exposure limits apply. Personal Protective Equipment EYES: SKIN: Eye protection is not required under conditions of normal use. If material is handled such that it could be splashed into eyes, wear plastic face shield or splash-proof safety goggles. No skin protection is required for single, short duration exposures. For prolonged or repeated exposures, use impervious clothing (boots, gloves, aprons, etc.) over parts of the body subject to exposure. If handling hot material, use insulated protective clothing (boots, gloves, aprons, etc.). RESPIRATORY PROTECTION: Respiratory protection is not required under conditions of normal use. If vapor or mist is generated when the material is heated or handled, use an organic vapor respirator with a dust and mist filter. All respirators must be NIOSH certified. PERSONAL HYGIENE: Consumption of food and beverage should be avoided in work areas where hydrocarbons are present. Always wash hands and face with soap and water before eating, drinking, or smoking. ENGINEERING CONTROLS / WORK PRACTICES & VENTILATION: If vapor or mist is generated when the material is heated or handled, adequate ventilation in accordance with good engineering practice must be provided to maintain concentrations below the specified exposure or flammable limits. Exposure Guidelines: - 3 -

No exposure limit has been set for exposure to vapors for this product. However, Lamplight and its suppliers recommend the ACGIH/OSHA/NIOSH - recommended limit of 5 mg/m3 (8-hour TWA) fir exposure to mists of this product. Component OSHA PEL ACGIH TLV None Established. PEL = Permissible Exposure Limits TLV = Threshold Limit Value TWA = Time Weighted Average ( 8hr.) STEL = Short Term Exposure Limit (15 min.) Carcinogenicity No carcinogenic ingredients. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance: Off white, Odor: Pleasant Vapor Pressure: No data available Vapor Density (Air=1): No data available Evaporation Rate (EE=1): No data available ph: No data available Volatile Organic Content: No data available Melting Point: 130-175 F(55-90 C) Specific Gravity: No data available Average Carbon Number: No data available Pour Point: No data available Viscosity @ 210 F: No data available Viscosity @ 40 C: No data available Solubility: Negligible in water 10. STABILITY AND REACTIVITY CHEMICAL STABILITY: Stable CONDITIONS TO AVOID: Heat INCOMPATIBILITY WITH OTHER MATERIALS: May react with strong oxidizing agents. Hazardous Decomposition Products:. HAZARDOUS DECOMPOSITION PRODUCTS: Carbon monoxide, carbon dioxide, and other oxides may be generated as products of combustion HAZARDOUS POLYMERIZATION: Will not occur 11. TOXICOLOGICAL INFORMATION LD50 >2000 mg/kg Oral Rat 12. ECOLOGICAL INFORMATION No information available 13. DISPOSAL CONSIDERATIONS - 4 -

SPECIAL INSTRUCTIONS: All disposals must comply with federal, state, and local regulations. The material, if spilled or discarded, may be a regulated waste. Refer to state and local regulations. Caution! If regulated solvents are used to clean up spilled material, the resulting waste mixture may be regulated. Department of Transportation (DOT) regulations may apply for transporting this material when spilled. WASTE CLASSIFICATION: Waste material may be land filled or incinerated at an approved facility. Materials should be recycled if possible. 14. TRANSPORT INFORMATION U.S. DEPARTMENT OF TRANSPORTATION (DOT) Highway / Rail (Non-Bulk): Not Regulated 15. REGULATORY INFORMATION U.S. Federal Regulations OSHA HAZARD COMMUNICATION STANDARD CLASSIFICATION: Nonhazardous as defined by the OSHA Hazard Communication Standard. TSCA INVENTORY LISTING: Components are listed on the Toxic Substances Control Act Inventory. 16. OTHER INFORMATION Hazard Ratings HMIS Health: 0 FLAMMABILITY: 1 REACTIVITY: 0 Revision Summary Date Description 6/26/2012 Document created THE DATA AND INFORMATION CONTAINED HEREIN ARE BEING FURNISHED FOR INFORMATIONAL PURPOSES ONLY. UPON THE EXPRESS CONDITION, THAT EACH CUSTOMER SHALL MAKE ITS OWN ASSESMENT OF APPROPRIATE USE AND APPROPRIATE SHIPPING, TRANSFER, AND STORAGE MATERIALS AND PROCEDURES FOR LAMPLIGHT FARMS PRODUCTS. LAMPLIGHT DISCLAIMS ANY LIABILITY FOR DAMAGE OR INJURY WHICH MAY RESULT FROM THE USE OF THE ABOVE DATA, AND NOTHING CONTAINED THEREIN SHALL CONSTITUTE A GUARANTEE, WARRANTY, (INCLUDING WARRANTY OF MERCHANTABILITY) OR REPRESENTATION (INCLUDING FREEDOM FROM PATENT LIABLITY) BY LAMPLIGHT FARMS WITH RESPECT TO THE DATA, THE PRODUCTS DESCRIBED, OR THEIR USE FOR ANY SPECIFIC PURPOSE, EVEN IF THAT PURPOSE IS KNOWN TO LAMPLIGHT FARMS. - 5 -

PREPARED BY: LAMPLIGHT FARMS. TELEPHONE NUMBER: (800) 645-5267 Lamplight Farms - 6 -