Efficient Pigging of Gathering Lines. Energy Management Workshop for Upstream and Midstream Operations

Similar documents
REDUCING EMISSIONS WHEN TAKING COMPRESSORS OFF-LINE

Reduce Turnaround Duration by Eliminating H 2 S from Flare Gas Utilizing VaporLock Scrubber Technology

Veriforce TG CCT 661OP. Training Guide

ANNEX AMENDMENTS TO THE INTERNATIONAL CODE FOR FIRE SAFETY SYSTEMS (FSS CODE) CHAPTER 15 INERT GAS SYSTEMS

SHOP WELDED TANKS STANDARD CONNECTIONS

JOSOP 603 flaring and venting Standard

N2 Blanketing Valve DST100 / DST200 TYPE INSTRUCTION MANUAL CONTENTS K.S.P.C. General Description Operation. Installation Maintenance

2 Sentry MCL Installation, Operation & Maintenance

TECHNICAL GUIDANCE DOCUMENT NUMBER 3: CENTRIFUGAL COMPRESSORS WITH WET (OIL) SEALS

Advanced Management of Compressed Air Systems Pre-Workshop Assignment

NSPS SUBPART Ka Check-off Form JULY 11, LAFAYETTE ROAD NO., ST. PAUL, MN

4 IN. BALL LAUNCHER Engine Mounted / PTO Driven

English. Introduction. Safety Instructions. All Products. Inspection and Maintenance Schedules. Parts Ordering. Specifications WARNING WARNING

Valve Replacement: Using Non-Intrusive Isolation Technology to Minimize Production Downtime

TOPIC: KNOWLEDGE: K1.01 [2.5/2.7] An atmospheric pressure of 15.0 psia is equivalent to... A psig. B psig. C psig.

Training Fees 4,000 US$ per participant for Public Training includes Materials/Handouts, tea/coffee breaks, refreshments & Buffet Lunch.

OPERATING PROCEDURES

Pressure Reducing Valve for Steam Type 2333 A

Cycle Isolation Monitoring

Manual Actuated Boiler Blowdown Valves

Responding to Natural Gas Pipeline Emergencies

VAREC 180 SERIES PRESSURE REGULATORS

PRESSURE EQUIPMENT EXEMPTION ORDER. User Guide for. Pressure Equipment Exemption Order. Alberta Regulation 56/2006

Maintenance and Troubleshooting of Pneumatic Conveying Systems for Sand in a Foundry

The Original 24/7 PMO Valve and 24/7 PMO Tank Valve. The only way to non-stop production. GEA Mechanical Equipment / GEA Tuchenhagen

SAN JUAN BASIN: SUBPART W & WELL-SITE DATA

Periodical surveys of cargo installations on ships carrying liquefied gases in bulk

RESOLUTION A.567(14) adopted on 20 November 1985 REGULATION FOR INERT GAS SYSTEMS ON CHEMICAL TANKERS

API 682 Mechanical Seals. Swagelok Eastern Australia & New Zealand

TECHNICAL GUIDANCE DOCUMENT NUMBER 9: CASINGHEAD GAS VENTING

BT6HC Hygienic Sanitary Balanced Pressure Steam Trap for High Capacity and CIP/SIP Applications

SAFETY MANUAL PURGING, VENTING & DRAINING PROCEDURE TABLE OF CONTENTS 1. INTRODUCTION SCOPE DEFINITIONS PROCEDURE...

Permitted MSS Emissions Tracking, Recordkeeping, and Reporting. Presented by ACES April 24, 2008

Focus on VOC Emissions Reduction Using an Oxygen Based Inerting Control System For Inert Gas Blanketing of Chemical Process Vessels

Leak testing of Valves. Standards for acceptable Rates of Valve Leakage

Pressure measurement Applying remote seal, isolation diaphragms between process fluids and transmitters

Safety in Petroleum Industry

Successful Implementation of Dry Gas Seal in High Pressure Recycle gas Compressor at Hydrocracker & Effect of Gas composition on DGS Performance

KBV21i and KBV40i Air Actuated Boiler Blowdown Valves

Installation, Operation and Maintenance Manual for Back Pressure Regulator

Drain Splash Back Burns Operator

Fundamentals of Compressed Air Systems. Pre-Workshop Assignment

9.0 Equipment Cleaning and Repair

TABLE OF CONTENTS PART 2 - CONFINED SPACES

HOW TO NOT MEASURE GAS - ORIFICE. Dee Hummel. Targa Resources

Type R622 Pressure Reducing Regulator

TITAN FLOW CONTROL, INC.

Corrosion Protection in Dry-Pipe Systems Article and photos by Gregory Havel, except where noted. May 21, 2018

T 2523 EN Type 2406 Excess Pressure Valve Self-operated Pressure Regulators ANSI version

USM21 Sealed Bimetallic Steam Trap for use with Pipeline Connectors Installation and Maintenance Instructions

Cal/OSHA T8 CCR 1536 Cal/OSHA T8 CCR 4799 Cal/OSHA T8 CCR 4845 Cal/OSHA T8 CCR 4848

API Piping Plan 62: A Reliable Quench System

DESIGN DATA. Dry 105a. September 5, 2008

PURPOSE OF THE POLICY

Model Description

pumping gases JET PUMP TECHNICAL DATA

Revision 2013 Vacuum Technology 1-3 day Good Vacuum Practice 1 Day Course Outline

Reliability: Piping Distribution & Storage Matter. Instructor: Kurt Thielemann Principal

A3S Bellows Sealed Stop Valve Installation and Maintenance Instructions

API MPMS Chapter 17.6 Guidelines for Determining the Fullness of Pipelines between Vessels and Shore Tanks

FUNDAMENTALS OF PRESSURE RELIEF VALVES IN NATURAL GAS INSTALLATION - OPERATION - MAINTENANCE. Gary S. Beckett

LNG Marine Loading Arms and Manifold Draining, Purging and Disconnection Procedure

Tank Blanketing Pressure Regulators RHPS Series

S.A. Klein and G.F. Nellis Cambridge University Press, 2011

NORDCALC Introduction... 2 Registration... 2 Flow Calculations tab Torque Calculation & Actuator Mounting Data tab... 21

The purpose of this rule is to limit volatile organic compound (VOC) emissions from the storage of organic liquids.

1 Exam Prep NFPA 99 Health Care Facilities Questions and Answers (Plumbing Contractor)

Pipeline Flooding, Dewatering and Venting Dr Aidan O'Donoghue, Pipeline Research Limited, Glasgow, Scotland

Committee on NFPA 85

The Discussion of this exercise covers the following points:

PRO-50 Instrument Supply Regulator

Mechanical Seal Piping Plans

Non-intrusive Natural Gas Flow Measurement

Pressure Regulators. Operating Instructions. Instrumentation

TSS21 Sealed Thermostatic Steam Tracer Trap

Standard: NFPA 86 Process Ovens and Furnaces. NFPA 85 Boiler and Combustion Systems Hazards Code

VALVES OPERATION, MAINTENANCE & TROUBLESHOOTING

The Shand & Jurs Model Vapor Guard Tank Blanketing Valve

6.6 Relief Devices. Introduction

KBV21i and KBV40i Key Operated Boiler Blowdown Valves Installation and Maintenance Instructions

The Application of Temperature and/or Pressure Correction Factors in Gas Measurement

Air Eliminators and Combination Air Eliminators Strainers

Anderson Greenwood Type 4142 piped away pressure relief valves

FLAMMABLE GASES AND FLAMMABLE CRYOGENIC FLUIDS

OIL AND GAS PROCESSES AND EMISSIONS

Inert Air (N2) Systems Manual

SECTION P4 SEPARATION SYSTEMS

LNG Cargo Operations. Juan Manuel Martín Ordax

IC67 - Pre-Instructional Survey

Tank Blanketing. Application Jordan Valve Product Offering Competition

FV Flash Vessel Installation and Maintenance Instructions

NGP-250/500 Nitrogen Generator Quick Start Guide

POP Safety Valve. POP Safety Valve INTRODUCTION DEFINITIONS

DF1 and DF2 Diffusers

Rules for the Installation, Inspection and Testing of Air Reservoirs (Other than on Locomotives)

ISO 9001:2000 Certifi ed Certifi cate No. C By-Pass Pigging Valves

EXAMPLES OF COMPLIANCE METHODS FOR MONITORING AND RECORDKEEPING RCRA SUBPARTS BB AND CC. Tennessee Operations Eastman Chemical Company

Technical Information

Improve Reliability of Turbomachinery Lubrication and Sealing Systems

Mechanical Seal Piping Plans

Transcription:

Efficient Pigging of Gathering Lines Energy Management Workshop for Upstream and Midstream Operations January 17, 2007

Agenda Methane Losses from Pipeline Pigging Methane Recovery Industry Experience Is Recovery Profitable? Discussion Topics 2

Methane Losses from Pipeline Pigging Pipeline pigging contributes to the 4,060 Mcf methane per year vented by an average processing plant the 2,886 Mcf methane per year of fugitive methane emissions at an average processing plant Mcf = thousand cubic feet 3

Pigging Gathering Lines Hydrocarbons and water condense inside wet gas gathering lines, causing pressure drop and reducing gas flow Periodic line pigging removes liquids and debris to improve gas flow Efficient pigging: Keeps pipeline running continuously Keeps pipeline near maximum throughput by removing debris Minimizes product losses during launch/capture www.girardind.com/ 4

Pigging Applications Pipeline pigs come in a variety of shapes and sizes for different applications Cleaning pigs Have brushes or blades to help remove debris Sealing pigs Make tight seal for removing liquids from the pipe Inspection pigs Specialized pigs outfitted with instruments to monitor the pipeline integrity www.westernfilterco.com 5

Pigging and Methane Losses Gas lost when launching and receiving a pig Fugitive emissions from pig launcher/receiver valves Gas lost from storage tanks receiving condensate removed by pigging Gas vented from pipeline blowdowns 6

How Does Pigging Vent Methane? Gathering lines have built-in pig launchers Pig launchers have isolation valves for loading pigs, pressurizing pigs, and launching pigs with gas bypassed from the pipeline Launcher pressuring/depressuring loses methane out the vent valve Gas Flow Vent Valve Pig Launcher Gas Flow www.girardind.com/ 7

Pigging Vents Methane Twice! Methane lost through vent valve on the launcher and again through vent valve on the receiver Once receiver is isolated from the line, it must be depressured to remove the pig Liquids ahead of the pig drain to a vessel or tank Isolation valve leaks cause excessive venting to depressure www.girardind.com/ 8

Estimating Pigging Vents E = P * V / 14.7 * n * f where: E = methane emissions (cf) P = Gathering line pressure (psia) V = Launcher and receiver volume (cf) n = % methane f = number of piggings Pig trap isolation valve leakage greatly increases this minimum amount of gas venting cf = cubic feet psia = pounds per square inch absolute 9

Estimating Emissions from Pigging Estimating V Line Diameter (inches) V (cf) 6 0.9 12 4.6 18 11.5 26 27.7 34 65.2 48 170.7 Adapted from www.pigsunlimited.com Estimating P Estimating n Default: 315 psia Default: 78.8 % methane 10

Methane Recovery: Use Inert Gases Pipeline maintenance requires pipe section blowdown before work can begin Gas in pipeline is usually vented to the atmosphere Inert gas can be used to drive a pig down the section of pipe to be serviced, displacing the natural gas to a product line rather than venting Inert gas is then blown down to the atmosphere, avoiding methane loss 11

Inert Gas Setup Existing pig launcher can be used, set up to work with inert gases Portable nitrogen supply connected to the pig launcher vent Close valve on the main pipeline, pressurize launcher with inert gas, open launcher to main pipeline Supply nitrogen until pig reaches receiver www.girardind.com/ 12

Industry Experience One partner reported using inert gas to purge six pipelines for maintenance Gas savings from these applications was 538 Mcf These savings correspond to a typical application of: 2 miles of 10 inch diameter pipeline Nitrogen at 280 psia 13

Is Recovery Profitable? No capital costs with existing pigging facilities Labor costs are estimated at eight hours for two operators Nitrogen costs are roughly $8/Mcf Increased safety is the primary benefit of this project Gas savings are a secondary benefit, as the labor and nitrogen costs outweigh the gas value 14

Discussion Topics Identify other opportunities to reduce methane emissions from pigging Discuss further information required to identify and evaluate opportunities Any barriers to implementing the technologies and practices in this presentation 15

Contact Information Roger Fernandez 202-343-9386 fernandez.roger@epa.gov epa.gov/gasstar methanetomarkets.org 16