**** MATERIAL SAFETY DATA SHEET **** HEET Gas Line Antifreeze **** SECTION 1 - CHEMICAL PRODUCT AND MANUFACTURER IDENTIFICATION ****

Similar documents
HEET Gas Line Antifreeze

Chemical Name: Water Remover/ Anti-Freeze. Manufacturer: Iso-Heet. Container size: 12oz. Location: VLA. Disposal: Place empty container in trash.

MSDS : Heet Antifreeze Gas Line 12 Oz [24] MSDS Last updated: 02/11/2010

file://h:\mc Technologies\TERMS\PDefault563.htm

**** MATERIAL SAFETY DATA SHEET **** NB NAPA Radiator Cleaner **** SECTION 1 - CHEMICAL PRODUCT AND MANUFACTURER IDENTIFICATION ****

**** SAFETY DATA SHEET **** **** SECTION 1 - IDENTIFICATION ****

MATERIAL SAFETY DATA SHEET 4400 S. KILDARE BLVD. CHICAGO, IL (773)

MATERIAL SAFETY DATA SHEET

CYCLO INDUSTRIES, INC MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET FILE NO.: 378 NAME OF PRODUCT BIO-STAT MSDS DATE: 12 /18 /06

Material Safety Data Sheet

Material Safety Data Sheet For: Die Set Lube MSDS I.D. #135 P/N Quart Size. MSDS I.D. #136 P/N Gallon Size

SECTION 2 - HAZARDOUS INGREDIENTS Ingredient Name CAS Number Percent TSCA

MATERIAL SAFETY DATA SHEET Artisan Intensive Stone Cleaner SECTION 1 PRODUCT NAME AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET C-MUL SUN DRILLING PRODUCTS CORP.

Material Safety Data Sheet Gold Chloride, trihydrate. Section 1 - Chemical Product and Company Identification

*********************** EMERGENCY PHONE #: ************************

MATERIAL SAFETY DATA SHEET General Finishes Corporation. SECTION 2: Composition/Information on Ingredients

BOSS LUBRICANTS: MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET Isopropyl Alcohol 70% Product Number: 32

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet EDTA Titrant, 0.005M M, 5% w/v. Section 1 - Chemical Product and Company Identification

SDS. GHS Safety Data Sheet. Wechem, Inc. APACHE PRODUCT AND COMPANY IDENTIFICATION. Manufacturer HAZARDS IDENTIFICATION

Carolina Narrow Fabric Company

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET Complies with OSHA Hazard Communication Standard 29 CFR

MATERIAL SAFETY DATA SHEET Complies with OSHA Hazard Communication Standard 29 CFR

* HMIS CODE ratings are estimated by Epoxy Technology. II. HAZARDOUS INGREDIENTS CAS# WT % TOXICITY DATA

Safety Data Sheet SUREPREP NO-STING SKIN PROTECTANT

OSHA regulated. NE NE No No No. NE NE No No No

MSDS The Blaster Chemical Companies, Inc.

MATERIAL SAFETY DATA SHEET Certis USA 9145 Guilford Road, Suite 175 Columbia, Maryland 21046

MSDS AUTOGUARD DE-ICER Page 1 of 6. Address: 2340 U.S. Highway 301 North Dunn, NC 28334

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

SECTION 1. Product and Company Identification TRAP N'TOSS ATTRACTANT. SECTION 2. Composition/Information on Ingredients TRAP N'TOSS ATTRACTANT

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET FILE NO.: AVL-ECCII

MATERIAL SAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION 2. COMPOSITION/INFORMATION ON INGREDIENTS

Air Tool Lubricant MSDS. Air Tool Lubricant. (800) (Poison Control USA) 24 Hours (800) (CHEMTREC) 24 Hours. Not Applicable - Mixture

MATERIAL SAFETY DATA SHEET. Quick Identifier (In Plant Common Name): SP-101

14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK H74 UNF, Part A BILLERICA, MA 01821

SECTION 2 COMPOSITION / HAZARDOUS INGREDIENTS INFORMATION INGREDIENT WT % TLV / PEL* CAS # 9-OCTADECEN

MATERIAL SAFETY DATA SHEET

MSDS The Blaster Chemical Companies, Inc.

AIRPORT ROAD EAST STROUDSBURG, PA HEALTH = 2 FLAMMABILITY = 1 REACTIVITY =

MSDS Information. P. O. Box 499 Call INFOTRAC 24 Hour Number 101 Commercial Drive

M A T E R I A L S A F E T Y D A T A S H E E T

1. Product and Company Identification. Schaffner Manufacturing Co. Inc. Telephone: Herron Ave. Emergency Telephone:

MATERIAL SAFETY DATA SHEET MSDS DATE: 9/3/ Surfactant SUPERSEDES: None

Material Safety Data Sheet Potassium Ferrocyanide, 10% w/v. Section 1 - Chemical Product and Company Identification

GulfTEC Synthetic Motor Oil 0W-20

Material Safety Data Sheet (ATTAR-C)

Material Safety Data Sheet Grams Iodine Solution. Section 1 - Chemical Product and Company Identification

ULTRA GRO, LLC MATERIAL SAFETY DATA SHEET. Emergency Phone: (559) CHEMTREC: (800) MSDS Reference: ULTRA GRO, LLC (Rev.

M A T E R I A L S A F E T Y D A T A S H E E T

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

Safety Data Sheet. Revision Date: November, 16 th 2017 Issue Date: January 25, Product and Company Identification

MATERIAL SAFETY DATA SHEET 2. COMPOSITION/INFORMATION ON INGREDIENTS

MATERIAL SAFETY DATA SHEET CHEMORSE, LTD

SAFETY DATA SHEET (SDS) Stick-It! Rear View Mirror Adhesive

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Magnesium EDTA, 0.02% w/v. Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET WIZARDS METAL POLISH MSDS DATE: 7/31/2010

Material Safety Data Sheet Product No Cresyl Violet Acetate, Certified. Issue Date ( ) Review Date ( )

14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK H20E, Part A BILLERICA, MA 01821

Activated Carbon %

SAFETY DATA SHEET. Page 1 of 5 1. PRODUCT AND COMPANY IDENTIFICATION

M A T E R I A L S A F E T Y D A T A S H E E T

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Safety Data Sheet. Tuxton Synthetic Gear Oil 75W90

Relevant identified uses of the substance or mixture and uses advised against

MATERIAL SAFETY DATA SHEETY Complies with OSHA Hazard Communication Standard 29 CFR

MATERIAL SAFETY DATA SHEET PAGE 1

AST PENETRANT II SAFETY DATA SHEET Section 1- Product and Company Identification

MATERIAL SAFETY DATA SHEET M.S.D.S.

*** SAFETY DATA SHEET***

14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK OM125, Part A BILLERICA, MA 01821

Safety Data Sheet (SDS) Revision / Review Date: 5/27/2015

MATERIAL SAFETY DATA SHEET

=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION

M A T E R I A L S A F E T Y D A T A S H E E T

MATERIAL SAFETY DATA SHEET

1. Product and Company Identification. Schaffner Manufacturing Co. Inc. Telephone: Herron Ave. Emergency Telephone:

MATERIAL SAFETY DATA SHEET

Phone Emergency Phone Fax (270) (800) (270) CHEMTREC

SDS. GHS Safety Data Sheet. Wechem, Inc. Citro 100 PRODUCT AND COMPANY IDENTIFICATION HAZARDS IDENTIFICATION. Manufacturer NFPA: HMIS III:

Material Safety Data Sheet Xylenol Orange, 0.1% Aqueous. Section 1 - Chemical Product and Company Identification

MATERIAL SAFTEY DATA SHEET

MSDS The Blaster Corporation

M a t e r i a l S a f e t y D a t a S h e e t

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET. 2 Fleetwood Court Ronkonkoma, NY Causes eye irritation. (H320) Keep out of reach of children. (P102)

Health Flammability 2 Reactivity 0 PRODUCT NAME FORMBY S* Build-Up Remover

Transcription:

**** MATERIAL SAFETY DATA SHEET **** 28201 - HEET Gas Line Antifreeze SEC 1 - PRODUCT AND MANUFACTURER INFO SEC 2 - COMPOSITION INFORMATION SEC 3 - HAZARDS IDENTIFICATION SEC 4 - FIRST AID MEASURES SEC 5 - FIRE FIGHTING MEASURES CONSIDERATIONS SEC 6 - ACCIDENTAL RELEASE MEASURES SEC 7 - HANDLING AND STORAGE SEC 8 - EXPOSURE, PERS. PROTECTION SEC 9 - PHYS, CHEM PROPERTIES SEC 10 - STABILITY, REACTIVITY SEC 11 - TOXICOLOGY INFORMATION SEC 12 - ECOLOGICAL INFORMATION SEC 13 - DISPOSAL SEC 14 - TRANSPORT INFORMATION SEC 15 - REGULATORY INFORMATION SEC 16 - ADDITIONAL INFORMATION **** SECTION 1 - CHEMICAL PRODUCT AND MANUFACTURER IDENTIFICATION **** Product Name: 28201 - HEET Gas Line Antifreeze Part Number: 28201 Product CAS: (None) Product Code: 28201 Synonyms: 28201 - HEET Gas Line Antifreeze MANUFACTURER IDENTIFICATION Name: Gold Eagle Company Address: 4400 S. Kildare Blvd. City: Chicago State: IL Zip: 60632-4372 For information call: 773-376-4400 Emergency Number: N/A Emergency Agency: INFOTRAC Agency Number: 1-800-535-5053 MSDS Effective Date: 1/1/1980 MSDS Supersedes Date: 8/5/2005 Miscellaneous: Product CAS: Mixture Brief Description: Gas line dryer and antifreeze for automobiles. **** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

Chemical Name CAS MIN MAX Methanol 67-56-1 99 99 Proprietary Additive (none) 1 1 Miscellaneous: CHEMICAL NAME Methanol LIMIT VALUES PEL 200 ppm PEL 260 mg/m3 Proprietary Additive (CAS#:Mixture) N/A EMERGENCY OVERVIEW: **** SECTION 3 - HAZARDS IDENTIFICATION **** NFPA: Health: 1 Fire: 3 Reactivity: 0 Specific Hazard: None HMIS: Health: 1 Flammability: 3 Reactivity: 0 PPE: B Miscellaneous: This product does not contain any components above de minimus concentrations that are considered carcinogenic by OSHA, IARC or NTP. POTENTIAL HEALTH EFFECTS Target Organs/Primary Route(s) of Entry: Eye: Mild irritant. Skin: Prolonged or repeated skin contact may cause dermatitis, scaling and possible systemic effects. Ingestion: POISON-Oral human lowest lethal dose = 6.4 g/kg Inhalation: Poisonous, narcotic chemical affecting central nervous system resulting in: dizziness, nausea, visual impairment, narcosis and muscular impairment. Miscellaneous:

**** SECTION 4 - FIRST AID MEASURES **** Eye: If the product contacts the eyes, immediately wash the eyes with large quantities of room temperature water for at least 15 minutes, occasionally lifting the lower and upper lids. Get medical attention immediately. A follow up visit to an ophthalmologist should be made. Contact lenses should not be worn when working with this chemical. Skin: If the product contacts the skin, promptly wash the contaminated skin with soap and water for at least 15 minutes. If this product penetrates the clothing, promptly remove the clothing and wash the skin with soap and water. Systemic effects may be delayed 18 to 72 hours, therefore keep individual under observation. Ingestion: If this product is ingested and the person is conscious, induce vomiting, then give 2 teaspoons of baking soda in a glass of water. DO NOT INDUCE AN UNCONSCIOUS PERSON TO VOMIT. Get medical attention immediately. Inhalation: Move the exposed person to fresh air at once and call emergency medical care. If breathing has stopped, give artificial respiration. If breathing is difficult, give humidified oxygen. Notes to Physician: No data available. **** SECTION 5 - FIRE FIGHTING MEASURES **** Flash Point: 52 F. (11 C.) TOC AutoIgnition Temperature: N/A

Flammable Limits Lower Limit: Explosive Limit (LEL): 6.0 Upper Limit: Explosive Limit (UEL): 36.5 Extinguishing Media: Use halon replacement or carbon dioxide extinguishers or alcohol foam for small fires. Water spray or fog can cool fire but may not be effective in extinguishing fire. Large fires should be extinguished with alcohol foam. Use water spray to cool containers exposed to fire. Containers may explode in heat or fire. Unusual Fire and Explosion Hazards: Dangerous fire and explosion hazard when exposed to heat or flame. Methanol is extremely flammable and forms explosive mixtures with air. Methanol vapors may travel considerable distance to a source of ignition and flash back. Special Fire Fighting Procedures: Wear NIOSH approved SCBA respirator in the positive pressure mode and chemical protective clothing. General Information: Flammable Limits: 6.0 to 36.5 **** SECTION 6 - ACCIDENTAL RELEASE MEASURES **** Small Spill: Remove sources of heat or ignition, provide adequate ventilation, contain leak using absorbent, inert, non-combustible material. Large Spill: Contain spill, transfer to secure containers. In the event of an uncontrolled material release, the user should determine if release is reportable under applicable laws and regulations. **** SECTION 7 - HANDLING AND STORAGE ****

Handling: See other sections of MSDS. Storage: See other sections of MSDS. **** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION **** GENERAL HYGIENE CONSIDERATIONS: Use normal hygiene practices. OTHER PRECAUTIONS: Methanol waste and material contaminated with methanol would be regulated as a hazardous waste material under the hazardous waste number U154. ENGINEERING CONTROLS: Local Exhaust: Provide local ventilation to maintain exposure levels below recommended exposure limits. Mechanical (General): In confined spaces, mechanical ventilation may be required. Special Ventilation: N/A Other Ventilation: N/A PERSONAL PROTECTIVE EQUIPMENT Eyes/face: Use splash proof chemical, safety goggles or appropriate full-face respirator. Contact lenses should not be worn when working with this chemical. Skin: Use natural rubber or neoprene gloves as required. Respirators: Do not use air purifying respirator. Use NIOSH approved respirator approved supplied or self contained respirator. Respirators must be selected based on the airborne levels found in the workplace and must not exceed the working limits of the respirator.

Other Protective Clothing/Equipment: If there is a possibility of exposure of an individual's body to methanol, wear body covering work clothes to avoid prolonged or repeated exposure. **** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES **** Appearance/Odor: Yellow liquid, solvent odor ph: N/A Vapor Pressure: (MM HG): 97.0 Vapor Density(Air=1): 1.1 Evaporation Rate: N/A Viscosity: N/A Boiling Point: 148 F. (65 C.) N/A Freezing/Melting Point: N/A Decomposition Temperature: N/A Solubility in Water: Soluble Specific Gravity: 0.795 Molecular Formula: N/A Molecular Weight: N/A VOC Coating (minus water): 0 Lbs/Gallon Coating Density : 0 Solvent Density : 0 Lbs/Gallon Lbs/Gallon Percent Solvent (volume): 0 Percent Solids (volume): 0 Percent Water (volume): 0 Percent Volatile by Weight: 0

Miscellaneous: % Volatile/Volume: 100.0 Specific Gravity (H2O = 1): N/A Percent Solvent (Volume): N/A Percent Solids (Volume): N/A Percent Water (Volume): N/A Product is flammable, keep away from sources of ignition, combustibles, oxidizing material and acid. Store in an area equipped with automatic sprinklers or fire extinguishing system. Empty containers contain product residues, assume empty container to have the same hazards as full containers. Chemical Stability: Stable: Yes **** SECTION 10 - STABILITY AND REACTIVITY **** Conditions to Avoid: Store in a well ventilated place away from sources of ignition, combustibles, oxidizing materials and acid. Incompatibilities with Other Materials: Strong oxidizing agents, aluminum, zinc, or metals that displace hydrogen, rubber and rubber based coatings, chromic anhydride, lead perchlorate and perchloric acids. Hazardous Decomposition Products: Excessive heating and/or incomplete combustion will produce carbon monoxide. Hazardous Polymerization: Hazardous Polymerization May Occur: No

No data available. **** SECTION 11 - TOXICOLOGICAL INFORMATION **** No data available. **** SECTION 12 - ECOLOGICAL INFORMATION **** **** SECTION 13 - DISPOSAL CONSIDERATIONS **** Dispose of product in accordance with local, state, and federal regulations. Before attempting clean up, refer to other sections of MSDS for hazard warning information. **** SECTION 14 - TRANSPORT INFORMATION **** Transportation Information: Shipping Information (CFR 49 and IMDG): Proper Shipping Name: Gasoline Additive, N.O.I. DOT Hazard Class: Consumer commodity, ORM-D DOT UN Number: None required. IMDG Shipping Name: Dangerous Goods in Limited Quantities of Class 3.2 (Methanol), PGII Label Information: No data available. SARA Title III: Section 302: None **** SECTION 15 - REGULATORY INFORMATION ****

Section 304: None Section 311: Hazard categories-fire Hazard-Yes; Acute=Yes and Chronic=Yes Section 313: Methanol, CAS# 67-56-1, 99.0% CERCLA: Section 311(b)(4): Requires discharges of crude oil and petroleum products in any kind or form to waters must immediately be reported to the National Response Center at (800) 424-8802. **** SECTION 16 - ADDITIONAL INFORMATION **** Disclaimer: Information presented herein is believed to be factual, as it has been derived from the works and opinions of persons believed to be qualified experts. However, nothing contained in this information is to be taken as warranty or representation for which the Gold Eagle Co. bears legal responsibility. The user should review any recommendations in the specific context of the intended use to determine whether they are appropriate. Prepared by: Mike Profetto