Airfix Pressure expansion vessels for sanitary appliances and potable water systems

airfix expansion vessels Your reliable partner 4 Airfix Pressure expansion vessels for sanitary appliances and potable water systems AIRFIX A AIRFIX AIRFIX -E AIRFIX P Edition EXP 2009

Flamco offers you a wide choice in the field of The use of offers the user a number of important advantages. Airfix A and Airfix expansion vessels are through-flow vessels, meaning that they are specially constructed so that they regularly rinse themselves with fresh mains water. In this way, still, stagnant water, which is associated with the formation of detrimental bacteria, is eliminated from the equation. As a result, the quality of the potable water is preserved. As the interior of the vessel is coated there is no chance of the water coming into contact with untreated steel even in the event of damage to the internal diaphragm. Therefore, should the diaphragm become damaged the water will remain uncontaminated. By using the Airfix A and expansion vessels, you can also limit water wastage. AIRFIX A The Airfix A expansion vessel is supplied with a synthetic flow divider, suitable for T-pieces for pipes of max. 3 /4 (22 mm). This flow divider is placed in the standard T-piece (which is not included in the tank supply). The Airfix A expansion vessel and T-piece assembly must be fitted in the cold-water installation of the boiler and through-flow is established. USER AVANTAGES AIRFIX A AN AIRFIX u Very easy to fit. u Covered inside and out with an anti-corrosion coating, both in the water half and the nitrogen half. u Neither the diaphragm nor the coating give off any dye, smell or taste to the water; both have been approved by CE and the VGW (in Germany). u Can be used with any storage water heater. u Can also be used in pressure boosting systems. u Fitted with a butyl rubber membrane. Tables with types and technical information: page 4.7. 4.2

expansion vessels for potable water installations Without an expansion vessel for sanitary appliances, the safety-valve (inlet combination) will leak water every time water is heated causing water wastage on each occasion. This significantly heightens the chance of lasting leakage as a result of pollution or calcium deposits building up in the area of the valve seat. This kind of serious water loss can now be stemmed by using an Airfix A or Airfix expansion vessel. AIRFIX All Airfix A and Airfix vessels are white in colour. Both butyl rubber diaphragm and vessel coating are internationally approved for use in combination with drinking water, meeting the CE standards (2002/16/EC). A reliable clamp construction which damages neither the vessel nor the diaphragm while allowing conservation of the entire vessel surface, something which is unthinkable in welded vessels without flanges. Airfix vessels use a special T-piece (supplied) which aids through-flow with its internal divider to ensure full through-flow in the vessel. An AirfixControl is fitted between the vessel and T-piece, enabling the Airfix vessel to be de-pressurized for maintenance work without the need for the installation to be put out of commission. The vessel pre-pressure must be 0.2 bar lower than the pressure behind the pressure-reducing valve in the cold water pipe in order to guarantee a proper flow. Internal coating prevents corrosion, even in case of a faulty membrane. irections on how to fit the Airfix pressure expansion vessel Airfix A or Airfix expansion vessels should always be used with a Prescor B boiler valve. The vessel must be mounted in the cold-water pipe, between the Prescor valve and boiler. Airfix A or with Prescor B boiler valve 4.3

Logical Airfix technology offers the user significant advantages The Airfix -E expansion tank can be used in pressure boosting systems, on either the intake or compression sides of the pumps. These installations are intended to prevent excessively low feeding pressure and help prevent excessive pressure changes at low flow speeds. At the same time, they reduce the number of times the pressure-water assembly needs to be switched. The Airfix -E expansion tank offers the precise solution for this. Airfix -E Pressure expansion tanks with exchangeable diaphragms, suitable for use in hot-water, pressure boosting and water-management systems. The Airfix -E is a solid, stable tank which is easy to fit. It is a through-flow tank with two flange connections which has an exchangeable butyl diaphragm. The high-quality material of which the diaphragm is constructed is your guarantee of low permeability (which means that your gas will not leak away) and if used correctly, renders permeability negligible. Airfix -E tanks are fitted standard with an electronic diaphragm-rupture sensor and an internally-coated steel through-flow flange. USER AVANTAGES AIRFIX -E u Very easy to fit. u Covered inside and out with an anti-corrosion coating, both in the water half and the nitrogen half. u Neither the diaphragm nor the coating give off any dye, smell or taste to the water; both have been approved by CE and the VGW (in Germany). u Can be used with any storage water heater. u Can also be used in pressure boosting systems. ON TE FLAMCO C you will find: This brochure as a PF file. Mounting instructions. WF files. CA symbols. Ensure that the double system connection is directly connected with the main flow in the potable water installation. Tables with types and technical information: page 4.8. 4.4

AIRFIX -E AIRFIX -E-B AIRFIX -E-L Inspection port (from 600 litres above and below). Pressure gauge with self-sealing valve case and an Rp 3 /80 IN 2999-1 connection to the tank itself. iaphragm-rupture sensor, basic appliance, display with red LE indicating diaphragm rupture. Maximum permissible gas prepressure on delivery: 6 bars. Maximum working pressures 10 and 16 bar. Airfix -E tanks are coated green. iaphragm-rupture sensor including signal cable. The Airfix -E diaphragm expansion tank has a gas space between the tank wall and the exterior of the membrane, and a water space within the diaphragm. The configuration of the gas space depends on the operating characteristics and the required pressure. A pressure boost in the water space will compress the gas volume and fill the diaphragm, while a reduction in pressure will lead to draining of water. Should the pressure in the gas space reach the set water pressure in the installation, water will be drained from the connection pipe. In all operating conditions, water flows through the tank with a very low loss of pressure. See the pressure loss diagrams that are available as PF files on the C. Airfix -E-B For pressure boosting, potable household, processing or fire-extinguishing installations. Single steel threaded connection (without through-flow function) and without electronic membrane-rupture sensor. All materials used in this tank are potable water quality. Airfix -E ouble system connection the link with the connection pipe. Airfix -E-L ouble system connection with through-flow function. For use in hotwater, pressure boosting and watermanagement systems. 4.5

Airfix P: the series of expansion vessels for pressure boosting installations Airfix P expansion vessels are suitable for potable water, processing water and fire fighting water installations in the event that oxygen-rich water is used, and are available in contents between 2 litres and 5,000 litres, partially available in horizontal models. Airfix P tanks comply with the requirements of European Pressure Equipment irective 97/23/EC. AIRFIX P AIRFIX P AIRFIX P Male thread connection. Bladder made of butyl rubber. Steel tank in RAL 9006. System connection. The maximum operating pressure is 10 bar. Maximum continuous operating temperature at the bladder is 70 C. All tanks are fitted with an exchangeable bladder. The tank connection is not a flow-through type. Airfix P models 750 up to 5000 are fitted with a pressure gauge. AVANTAGES OF TE AIRFIX P: u Wide range of products suitable for many applications. u Available as both vertical and horizontal configurations. u as WRc and ACS approval. Tables with types and technical information: page 4.10. 4.6

Airfix A and Airfix expansion vessels u As long as the flow divider is not used, the Airfix A expansion vessel will function as a non-through-flow vessel. u If the Airfix T piece is not used, the Airfix expansion vessel functions as a nonthrough-flow vessel. u The pressure expansion vessels, when used in boiler systems, must always meet the requirements of the water board. u The maximum temperature in Airfix vessels is 70 C. Versions and dimensions Airfix A Prepressure Capacity Max. operating pressure Connection (male thread) imensions in mm Weight in bar in litres in bar Ø A in kg Code number Airfix A 8 4 8 10 3 /40 245 301 4.4 24259 Airfix A 12 4 12 10 3 /40 286 334 5.8 24349 Airfix A 18 4 18 10 3 /40 328 325 6.7 24459 Airfix A 25 4 25 10 3 /40 358 378 8.9 24559 Airfix A 35 4 35 8 3 /40 396 437 11.1 24659 airfix a Versions and dimensions Airfix and AirfixControl Prepressure Capacity Max. operating pressure Connection (male thread) imensions in mm Weight Code number in bar in litres in bar Ø A in kg Airfix 8 4 8 10 3 /40 245 301 4.4 14259 Airfix 12 4 12 10 3 /40 286 334 5.8 14349 Airfix 18 4 18 10 3 /40 328 325 6.7 14459 Airfix 25 4 25 10 3 /40 358 378 8.9 14559 Airfix 35 4 35 8 3 /40 396 437 11.1 14659 AirfixControl 56 28830 A airfix Selection table for pressure expansion vessels if for boiler applications * ifferent pre-pressures available on request. Water contents boiler Cold water supply pressure in bar Set pressure Prescor B valve, Prescor inlet combination in litres 6,0 bar 7,0 bar 8,0 bar 10,0 bar 100 3 Airfix 8/3 Airfix 8/3 Airfix 8/3 Airfix 8/3 100 4 Airfix 12/4 Airfix 8/4 Airfix 8/4 Airfix 8/4 150 3 Airfix 12/3 Airfix 12/3 Airfix 12/3 Airfix 8/3 150 4 Airfix 18/4 Airfix 12/4 Airfix 12/4 Airfix 12/4 200 3 Airfix 18/3 Airfix 12/3 Airfix 12/3 Airfix 12/3 200 4 Airfix 25/4 Airfix 18/4 Airfix 18/4 Airfix 12/4 250 3 Airfix 18/3 Airfix 18/3 Airfix 18/3 Airfix 12/3 250 4 Airfix 25/4 Airfix 25/4 Airfix 18/4 Airfix 18/4 300 3 Airfix 25/3 Airfix 18/3 Airfix 18/3 Airfix 18/3 300 4 2x Airfix 18/4 Airfix 25/4 Airfix 25/4 Airfix 18/4 A airfixcontrol 4.7

Airfix -E, -E-B and -E-L expansion tanks u Airfix -E and -E-B tanks from 50 3000 litres with a maximum operating pressure of 10 or 16 bars (-E-B also 25 bars) and a maximum temperature of 70 C. u Airfix -E-L tanks from 50 600 litres with a maximum operating pressure of 10 bar. u Tanks with model approval in compliance with Council irective 97/23/EC. u iaphragm-rupture sensor, Council irective 89/336/EC-compliant. u Special execution (available on request) stainless steel through-flow flange (mat. 1.4304) or a stainless steel mono-connection. If a mono-connection is fitted, the tank is no longer equipped with through-flow. Versions and dimensions Airfix -E Capacity in imensions in mm Flanges Weight in kg Code number litres Ø a e PN 16 10 bar 16 bar 10 bar 16 bar Airfix -E 50 50 450 845 320 195 N 40 60 70 14700 14701 Airfix -E 80 80 450 1025 320 195 N 40 70 80 14800 14801 Airfix -E 120 120 450 1280 320 195 N 40 80 95 14812 14813 Airfix -E 180 180 550 1245 320 190 N 40 110 135 14818 14819 Airfix -E 240 240 550 1505 320 190 N 40 130 160 14824 14825 Airfix -E 300 300 550 1845 320 190 N 40 150 190 14830 14831 Airfix -E 600 600 750 1850 390 145 N 50 230 300 14860 14861 Airfix -E 800 800 750 2240 390 145 N 50 270 350 14880 14881 Airfix -E 1000 1000 750 2740 390 145 N 50 320 415 14910 14911 Airfix -E 1600 1600 1000 2685 370 270 N 80 550 610 14916 14917 Airfix -E 2000 2000 1200 2435 370 285 N 80 620 680 14920 14921 Airfix -E 3000 3000 1200 3335 370 285 N 80 805 890 14930 14931 airfix d-e Versions and dimensions -E-B Capacity in imensions in mm Female-thread connection Weight in kg Code number litres Ø e ISO 228-1 10 bar 16 bar 25 bar 10 bar 16 bar 25 bar Airfix -E-B 50 50 450 845 300 G 1 1 /20 60 70 59 14704 14703 14705 Airfix -E-B 80 80 450 1025 300 G 1 1 /20 70 80 71 14804 14803 14805 Airfix -E-B 120 120 450 1280 300 G 1 1 /20 80 95 87 14816 14815 14811 Airfix -E-B 180 180 550 1245 300 G 1 1 /20 110 135 123 14822 14821 14817 Airfix -E-B 240 240 550 1505 300 G 1 1 /20 130 160 149 14828 14827 14829 Airfix -E-B 300 300 550 1845 300 G 1 1 /20 150 190 182 14834 14833 14835 Airfix -E-B 600 600 750 1850 280 G 20 230 300 349 14864 14863 14865 Airfix -E-B 800 800 750 2240 280 G 20 270 350 417 14882 14883 14885 Airfix -E-B 1000 1000 750 2740 280 G 20 320 415 500 14912 14913 14905 Airfix -E-B 1600 1600 1000 2685 390 G 2 1 /20 550 610 747 14918 14919 14915 Airfix -E-B 2000 2000 1200 2435 390 G 2 1 /20 620 680 957 14922 14923 14925 Airfix -E-B 3000 3000 1200 3335 390 G 2 1 /20 805 890 1288 14932 14933 14935 a e airfix d-e-b Versions and dimensions Airfix -E-L Capacity in imensions in mm Female-thread connection Weight in kg Code number litres Ø e a ISO 228-1 10 bar Airfix -E-L 50 50 450 845 300 100 G 1 1 /20 65 14702 Airfix -E-L 80 80 450 1025 300 100 G 1 1 /20 75 14802 Airfix -E-L 120 120 550 1280 300 100 G 1 1 /20 90 14814 Airfix -E-L 180 180 550 1235 300 100 G 1 1 /20 130 14820 Airfix -E-L 240 240 550 1495 300 100 G 1 1 /20 155 14826 Airfix -E-L 300 300 550 1835 300 100 G 1 1 /20 185 14832 Airfix -E-L 600 600 750 1850 300 100 G 2 1 /20 292 14862 e airfix d-e-l Accessories Airfix -E Code number Remote reading 14020 diaphragm-rupture NOTE: When selecting the pre-pressure and after-pressure, please ensure that the maximum efficiency is not exceeded (60%). e 4.8

Loose connections for Airfix -E and Airfix -E-B expansion vessels Versions of mono connections For vessel content For vessel content Code number litres Mono small stainless steel 50-300 G 1 1 /20 14960 Mono medium stainless steel 600-1000 G 2 14961 Mono large stainless steel 1600-3000 G 2 1 /20 14962 Mono small coated 50-300 G 1 1 /20 14955 Mono medium coated 600-1000 G 2 14956 Mono large coated 1600-3000 G 2 1 /20 14957 Versions of duo connections For vessel content For vessel content Code number liter uo small stainless steel 50-300 G 1 1 /20 14950 uo medium stainless steel 600-1000 G 2 14951 uo large stainless steel 1600-3000 G 2 1 /20 14952 4.9

Airfix P expansion vessels u For potable water, processing water and fire fighting water installations in cases where oxygen-rich water is used. u Fitted with a galvanized steel single thread connection (no flow-through function). u With WRc and ACS approval. u Standard pre-pressure of 2.7 bar. Versions and dimensions of the upright Airfix P expansion vessels Prepressure Capacity Max. operating pressure Connection (male thread) imensions in mm Weight in bar litres in bar Ø A in kg Code number Airfix P 2 2.7 2 10 1 /20 120 235 1.2 24850 Airfix P 3 2.7 3 10 3 /40 170 240 1.5 24851 Airfix P 5 2.7 5 10 3 /40 170 275 1.7 24852 Airfix P 8 2.7 8 10 3 /40 220 305 2.2 24853 Airfix P 12 2.7 12 10 3 /40 260 310 2.9 24854 Airfix P 16 2.7 16 10 3 /40 260 345 3.4 24855 Airfix P 18 2.7 18 10 3 /40 260 375 3.5 24856 Airfix P 24 2.7 24 10 3 /40 260 485 4.3 24857 Airfix P 35 2.7 35 10 10 380 470 8 24858 airfix P Airfix P 50 2.7 50 10 10 380 720 9.9 24859 Airfix P 60 2.7 60 10 10 380 830 12.1 24860 Airfix P 80 2.7 80 10 10 460 760 14 24861 Airfix P 100 2.7 100 10 10 460 880 16 24862 Airfix P 150 2.7 150 10 10 510 1030 25.5 24863 Airfix P 200 2.7 200 10 1 1 /40 590 1070 37.5 24864 Airfix P 300 2.7 300 10 1 1 /40 650 1250 50.5 24865 A Airfix P 500 2.7 500 10 1 1 /20 650 1780 86 24866 Airfix P 750 2.7 750 10 1 1 /20 750 2060 128 24867 Airfix P 1000 2.7 1000 10 20 750 2560 163 24868 Airfix P 1500 2.7 1500 10 2 1 /20 1000 2510 423 24869 Airfix P 2000 2.7 2000 10 2 1 /20 1100 2745 483 24870 Airfix P 2500 2.7 2500 10 2 1 /20 1200 3295 537 24871 Airfix P 3000 2.7 3000 10 2 1 /20 1200 3425 766 24872 Airfix P 5000 2.7 5000 10 2 1 /20 1500 3615 1629 24873 Versions and dimensions of the horizontal Airfix P expansion vessels Prepressure Capacity Max. operating pressure Connection (male thread) imensions in mm Weight in bar litres in bar Ø A in kg Code number Airfix P 24-2.7 24 10 3 /40-10 260 485 4.7 24880 Airfix P 50-2.7 50 10 10 380 595 8.1 24890 Airfix P 60-2.7 60 10 10 380 720 10.4 24881 Airfix P 80-2.7 80 10 10 460 660 12.3 24882 Airfix P 100-2.7 100 10 10 460 780 14 24883 Airfix P 150-2.7 150 10 10 510 950 23.5 24884 Airfix P 200-2.7 200 10 1 1 /40 590 940 34.2 24885 Airfix P 300-2.7 300 10 1 1 /40 650 1150 44 24886 Airfix P 500-2.7 500 10 1 1 /40 750 1420 58 24887 A A airfix P horizontal 4.10

Your reliable partner worldwide u Flamco is renowned worldwide for its quality and service. It has 7 production facilities and 12 sales outlets under its own management. Reliable distributors represent Flamco in other countries. Australia Austria Belgium Cyprus Czech Republic enmark Estonia Finland France Germany Greece ungary Iceland Italy Japan Kuwait Latvia Lebanon Lithuania Netherlands New Zealand Norway Oman People s Republic of China Poland Portugal Qatar Romania Russia Saudi Arabia Slovakia South Africa Spain Sweden Switzerland Taiwan Turkey United Arab Emirates United Kingdom United States 4.11

AIRFIX A airfix expansion vessels TABLE OF CONTENTS page AIRFIX Airfix A and Airfix 4.2/4.3 Airfix -E, -E-B and -E-L 4.4/4.5 Airfix P 4.6 Tables 4.7/4.10 Flamco b.v. P.O. Box 115 2800 AC Gouda - olland Industriestraat 6 2802 AC Gouda - olland Telephone: (+ 31) 182 591800 Fax: (+ 31) 182 522557 info@flamco.nl www.flamcogroup.com AIRFIX -E On the Flamco C you will find all available information of the Flamco products. Copyright Flamco b.v., Gouda, olland. No part of this publication may be reproduced or published in any way without explicit mention of the source. The data listed are solely applicable to Flamco products. Flamco b.v. shall accept no liability whatsoever for incorrect use, application or interpretation of the technical information. Flamco b.v. reserves the right to make technical alterations. AIRFIX P Flamco b.v. refers you further to its international sales and delivery conditions as drawn up by Orgalime. 18502911