AB SEALS PTY. LTD. ABN 14 602 544 632 3 Welch St Underwood QLD 4119 Ph 07 3341 1200 Fax 07 3341 9399 Email sales@abseals.com.au 1/1880 Hume Hwy Campbellfield VIC 3061 Ph 03 9357 0451 Fax 03 9357 5876 Email vicsales@abseals.com.au SEALS YOU CAN RELY ON GRAB KITS O-RINGS BONDED WASHERS, FLANGE SEALS FITTINGS SEALS O-RING TOOLS, LUBRICANTS EFFECTIVE 1 ST JANUARY 2015 Ver 15.06.25 1
We are proud to announce the release of a new range of Maxi O-Ring kits, possible the most comprehensive kits available in the Australian marketplace. Each consists of 5 compartmented assortment boxes contained in a rugged carry case. These are a must for any service van or as a workshop stock assortment. Ver 15.06.25 2
ORK-MAXI FITTING $ 775.10 2 965 Assorted O-Rings (Nitrile 90 Duro), Flaretites, D-Rings, Bonded Washers, Retainers to suit UNO, SAE & Cat Flanges, BSP, ORFS, JIC fittings UNO O-RINGS NITRILE 90 DURO TO SUIT QTY TO SUIT QTY 0.437" -07 20 1.062" -17 20 0.562" -09 20 1.312" -21 5 0.750" -12 20 1.625" -26 5 0.875" -14 20 1.875" -30 5 SAE FLANGE O-RINGS NITRILE 90 DURO 0.500" -08 20 2.000" -32 10 0.625" -10 20 2.500" -40 10 0.750" -12 20 3.000" -48 2 1.000" -16 20 3.500" -56 2 1.250" -20 20 4.000" -64 2 1.500" -24 20 5.000" -80 2 BSP O-RINGS NITRILE 90 DURO 0.125" -02 20 1.000" -16 20 0.250" -04 20 1.250" -20 20 0.375" -06 20 1.500" -24 20 0.500" -08 20 2.000" -32 5 0.750" -12 20 ORFS O-RINGS NITRILE 90 DURO 0.562" -09 20 1.187" -19 20 0.687" -11 20 1.437" -23 20 0.812" -13 20 1.687" -27 20 1.000" -16 20 2.000" -32 20 JIC FLARETITE SEALS 0.437" -07 5 1.062" -17 5 0.562" -09 5 1.312" -21 5 0.750" -12 5 1.625" -26 5 0.875" -14 5 D-RINGS TO SUIT CAT FLANGES 0.750" 5 1.500" 3 1.000" 5 1.750" 2 1.250" 5 2.000" 2 BSP BONDED WASHERS 0.125" -02 10 0.750" -12 10 0.250" -04 10 0.875" -14 10 0.375" -06 10 1.000" -16 10 0.500" -08 10 1.250" -20 5 0.625" -10 10 1.500" -24 5 BSP RETAINING RINGS 0.125" -02 10 0.750" -12 10 0.250" -04 10 1.000" -16 10 0.375" -06 10 1.250" -20 5 0.500" -08 10 1.500" -24 5 Ver 15.06.25 3
ORK-MAXI IMP N7 $ 398.28 2 1195 Imperial British Standard Nitrile 70 Duro O-Rings 220 Nitrile 90 Duro O-Rings to suit SAE-J518c Flanges and UNO fittings ORK-MAXI IMP N9 $ 423.33 2 1195 Imperial British Standard Nitrile 90 Duro O-Rings 220 Nitrile 90 Duro O-Rings to suit SAE-J518c Flanges and UNO fittings Contents of both ORK-MAXI IMP kits are listed below as arranged in kit. UNO / BOSS O-RINGS 903 25 908 25 904 25 910 25 905 25 912 15 906 25 916 10 SAE FLANGE O-RINGS BS210 10 BS222 5 BS214 10 BS225 5 BS219 10 BS228 5 1/16" CROSS SECTION BS006-018 25 BS022-028 15 BS019-021 20 BS029-030 10 3/32 CROSS SECTION BS109-118 25 BS131 10 BS119-120 20 BS133 10 BS121-127 15 BS135 5 BS128 10 1/8" CROSS SECTION BS210-214 20 BS228 10 BS215-222 15 BS232 10 BS223-224 10 BS236 10 BS226 10 We will also offer these kits in Viton 75 & 90 Duro, Neoprene 70 Duro, EPDM 75 Duro, Silicone 70 Duro and Nitrile 90 Duro Contoured Backups on request. Empty boxes and Cases are available as a set (ORK-MAXI BOX) @ $100.00 per set. Ver 15.06.25 4
ORK-MAXI MET N7 $ 658.23 2 1350 European Standard Metric Nitrile 70 Duro O-Rings sorted by cross section Contents of ORK-MAXI MET listed below as arranged in kit 1.00MM CROSS SECTION ID (MM) QTY ID (MM) QTY ID (MM) QTY 10.00 10 16.00 10 23.00 10 12.00 10 18.00 10 24.00 10 14.00 10 20.00 10 1.50MM CROSS SECTION 21.00 10 24.00 10 28.00 10 22.00 10 26.00 10 30.00 10 2.00MM CROSS SECTION 3.00 25 14.00 25 27.00 15 4.00 25 16.00 25 28.00 15 5.00 25 17.00 25 30.00 15 6.00 25 19.00 25 32.00 15 8.00 25 20.00 20 33.00 15 10.00 25 22.00 20 35.00 15 11.00 25 24.00 20 38.00 10 13.00 25 25.00 15 41.00 10 2.50MM CROSS SECTION 8.00 25 21.00 25 33.00 15 10.00 25 22.00 25 35.00 15 11.00 25 24.00 20 36.00 15 13.00 25 25.00 20 38.00 10 14.00 25 27.00 15 40.00 10 16.00 25 28.00 15 43.00 10 18.00 25 30.00 15 46.00 10 19.00 25 32.00 15 49.00 10 3.00MM CROSS SECTION 19.00 20 30.00 15 41.00 10 21.00 20 32.00 15 44.00 10 22.00 20 33.00 15 50.00 10 24.00 20 35.00 15 57.00 10 25.00 20 36.00 15 70.00 10 27.00 15 38.00 15 82.00 10 28.00 15 Ver 15.06.25 5
AB SEALS O-RING KITS These kits are assembled in house by AB Seals and are available in 20 compartment clear boxes 355mm x 275mm x 55mm. They can be provided with customized color lid inserts showing you logo and contact details. ORK-ORFS/UNO/SAE $ 157.50 2 Can be Supplied Marked with J.I.Case, Caterpillar or John Deere equivalent numbers 20 each Nitrile 90 Duro O-Rings for ORFS -09 to -27 20 each Nitrile 90 Duro O-Rings for SAE-J518c-12 to -20 Code 61 & 62 Flanges 20 each Nitrile 90 Duro O-Rings for UNO -07 to -21 10 each Nitrile 90 Duro O-Rings for UNO -26 to -30 ORK-ORFS/UNO/SAE V9 $ 986.65 2 Can be Supplied Marked with J.I.Case, Caterpillar or John Deere equivalent numbers 20 each Viton 90 Duro O-Rings for ORFS -09 to -27 20 each Viton 90 Duro O-Rings for SAE-J518c-12 to -20 Code 61 & 62 Flanges 20 each Viton 90 Duro O-Rings for UNO -07 to -21 10 each Viton 90 Duro O-Rings for UNO -26 to -30 ORK-BSP FITTING $ 198.79 2 20 each Nitrile 90 Duro O-Rings for BSP-02 to -32 5 each Bonded Washers for BSP-02 to -16 4 each metal Retainer Rings (used with O-Rings) for BSP-04 to -16 ORK-BWBSP $ 251.06 2 10 each Bonded Washers for BSP-02 to -16 5 each Bonded Washers for BSP-20 to -24 ORK-BWM $ 301.50 2 10 each Bonded Washers for M5 to M30 5 each Bonded Washers for M33 to M48 ORK-1/8 N7 $ 178.87 2 Total of 300 British Standard Imperial Nitrile 70 Duro O-Rings BS209 to BS228 ORK-1/8 N9 $ 226.57 2 Total of 300 British Standard Imperial Nitrile 90 Duro O-Rings BS209 to BS228 Ver 15.06.25 6
ORK-1/8 BU $ 329.30 2 Total of 300 British Standard Imperial Nitrile Contoured Backups BS209 to BS228 ORK-1/8 E7 $ 558.43 2 Total of 300 British Standard Imperial EPDM 75 Duro O-Rings BS209 to BS228 ORK-1/8 V7 $ 1356.02 2 Total of 300 British Standard Imperial Viton 75 Duro O-Rings BS209 to BS228 ORK-1/8 S7 $ 752.50 2 Total of 300 British Standard Imperial Silicone 70 Duro O-Rings BS209 to BS228 CATERPILLAR EQUIVALENT O-RING KITS O-Ring kits are supplied in sturdy briefcase type boxes, with the smaller sizes contained in sturdy Ziploc bags. D-Ring kits are supplied in compartmented boxes. Caterpillar numbers are listed as a reference only, all parts are aftermarket. ORK-4C4782 $ 250.43 2 570 Nitrile O-Rings in the 32 most popular Caterpillar sizes, covering fittings, valves and pumps ORK-4C8253 $ 457.11 2 148 yellow Silicone O-Rings in 32 popular Caterpillar sizes, all listed by Caterpillar equivalent part number ORK-4C4784 $ 250.43 2 10 each 1P3700 to 1P3707 ( ¾ to 2 1/8 ) D-Rings 5 each 1P3708 to 1P3709 (2 ¼ to 2 ½ ) D-Rings Ver 15.06.25 7
At AB Seals we are happy to design and assemble custom grab kits from our huge range of stock lines. These can be labeled with your own part numbers for each item and supplied with a full color laminated lid inserts. These can also bear your company logos and contact details. Some of our existing customized kits include special material O-Ring kits, washer assortments, complete machinery spare part and service kits. The only limitation is if the parts will fit! Our standard container is 20 compartments and measures 355mm x 275mm x 55mm, but many others are available at short lead times. Any standard Nitrile O-Ring kit can also be converted to the corresponding backup kit or alternative material kit providing all components are available Ver 15.06.25 8
These sets of 5 o-ring kits represent the best value for money. 5 complete grab kits for the same price as one genuine kit. No compromises made on material quality. We buy in bulk to pass the savings onto you. ORK-OK2SETN7 SET OF 5 O-RING GRAB KITS NITRILE 70 DURO CONTAINS THE FOLLOWING KITS: 1/16 CROSS SECTION IMPERIAL (OK22N7 @ $ 41.60 CODE 2) 3/32 CROSS SECTION IMPERIAL (OK23N7 @ $ 41.60 CODE 2) GENERAL IMPERIAL ASSORTMENT (OK21N7 @ $ 41.60 CODE 2) GERMAN STANDARD METRIC (OK25N7 @ $ 41.60 CODE 2) JAPANESE STANDARD JIS METRIC (OK24N7 @ $ 41.60 CODE 2) ONLY $125.00 PER SET CODE 4 ORK-OK2SETN9 SET OF 5 O-RING GRAB KITS NITRILE 90 DURO CONTAINS THE FOLLOWING KITS: 1/16 CROSS SECTION IMPERIAL (OK21N9 @ $ 54.30 CODE 2) 3/32 CROSS SECTION IMPERIAL (OK22N9 @ $ 54.30 CODE 2) GENERAL IMPERIAL ASSORTMENT (OK23N9 @ $ 54.30 CODE 2) GERMAN STANDARD METRIC (OK24N9 @ $ 54.30 CODE 2) JAPANESE STANDARD JIS METRIC (OK25N9 @ $ 54.30 CODE 2) ONLY $135.00 PER SET CODE 4 THEY RE GREAT VALUE, WHY NOT GRAB A SET TODAY? Ver 15.06.25 9
GENERIC O-RING KITS ORK-IMP N7 $ 71.00 2 Total of 382 British Standard Imperial Nitrile 70 Duro O-Rings BS006 to 012 (20 each) BS110 to 116 (13 each) BS210 to 222 (10 each) BS325 to 327 (7 each) ORK-IMP V7 $ 376.54 2 Total of 382 British Standard Imperial Viton 75 Duro O-Rings Sizes as per ORK-IMP N7 ORK-IMP C7 $ 296.28 2 Total of 382 British Standard Imperial Neoprene 70 Duro O-Rings Sizes as per ORK-IMP N7 ORK-IMP E7 $ 312.80 2 Total of 382 British Standard Imperial EPDM 80 Duro O-Rings Sizes as per ORK-IMP N7 ORK-IMP S7 $ 504.33 2 Total of 382 British Standard Imperial Silicone 70 Duro O-Rings Sizes as per ORK-IMP N7 ORK-BU $ 238.50 2 Total of 364 British Standard Imperial contoured Nitrile Backups BS006 to 012 (10 each) BS110 to 116 (14 each) BS210 to 222 (14 each) ORK-BUT $ 504.87 2 Total of 364 British Standard Imperial Solid PTFE Backups Sizes as per ORK-BU ORK-QUAD $ 238.50 2 Total of 382 British Standard Imperial Nitrile 70 Duro O-Rings Sizes as per ORK-IMP N7 Ver 15.06.25 10
ORK-JIS $ 199.16 2 Total of 444 Japanese Industrial Standard Nitrile 70 Duro O-Rings P003-N7 to P025-N7 G025-N7 to G060-N7 ORK-JIS N9 $ 212.21 2 Total of 444 Japanese Industrial Standard Nitrile 90 Duro O-Rings P003-N7 to P025-N7 G025-N7 to G060-N7 ORK-MET N7 $ 71.00 2 Total of 428 Metric European standard Nitrile 70 Duro O-Rings 5 x 2 to 13 x 2 (6 sizes) 10 x 2.5 to 22 x 2.5 (9 sizes) 19 x 3 to 38 x 3 (13 sizes) 39 x 4 to 48 x 4 (4 sizes) ORK-9A $ 190.80 2 Total of 410 Metric European standard Nitrile 70 Duro O-Rings 3 x 2 to 78 x 2 (60 sizes) ORK-9B $ 190.80 2 Total of 228 Metric European standard Nitrile 70 Duro O-Rings 3 x 3 to 78 x 3 (60 sizes) Ver 15.06.25 11
O-RING CORD SPLICING KITS ORK-IMP SPLICING $ 79.84 2 Extruded Nitrile 70 Duro O-Ring Cord 1 metre each of 1/16 nom., 3/32 nom., 1/8 nom., 3/16 nom., ¼ nom. 20g adhesive, knife, cutting guide ORK-MET SPLICING $ 79.84 2 Extruded Nitrile 70 Duro O-Ring Cord 1 metre each of 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 5mm, 5.7mm, 7mm 20g adhesive, knife, cutting guide A great investment for a mobile operation. Each kit contains lengths of quality Nitrile (NBR) o-ring cord, a knife and a bottle of adhesive bond. Measure the length of o-ring you require, put the cord into the cutting block to make a clean cut and then bond the ends of the cord together. In no time at all you will have a custom made o-ring to fix your job. Not suitable for o-rings in dynamic applications. Ver 15.06.25 12
TOOLS & LUBRICANTS We are also able to offer a range of picks and O-Ring measuring tools CONE-9U5155 $ 109.84 4 Just check your section in the notches on the base and then drop the O-Ring over the cone until it rest neatly on a step and read your size number. Covers 184 common Imperial British standard sizes TOOL-ORING CHART A2 $ 15.75 0 Set of 3 A2 laminated sheets showing exact Imperial size O-Ring profiles. KC-16390 $ 26.36 0 Set of 4 Chrome Vanadium tipped picks KC-10419 $ 38.36 0 Set of 4 picks, Phillip #0, 3mm Blade, T15 & T20 Star drivers in plastic case TOOL-PICKSET-8PCE $ 54.54 0 Set of 8 heavy duty picks in a blow molded case Ver 15.06.25 13
AB Seals are proud to offer Point-Of-Sale stands featuring blister packs of the most common fitting O- Rings and seals. We supply the complete stand, with signs, hooks and 2 complete sets of blister packed parts as listed below. All packs are available separately to restock, with an easy to use reorder form. Parts include O-Rings to suit BSP -02, -04, -06, -08, -12, -16, -20, -24, -32 SAE-J518C flanges -08, -12, -16, -20, -24, -32, -40 UNO -07, -09, -12, -14, -17, -21, -26, -30 ORFS -09, -11, -13, -16, -19, -23, -32 Flaretite Seals to suit JIC-07, -09, -12, -14, -17, -21, -26, -30 Bonded Washers to suit BSP -02, -04, -06, -08, -10, -12, -14, -16, -20, -24 Retaining Rings to suit BSP -02, -04, -06, 08, -12, -16, -20, -24 D-Rings to suit Cat flanges ¾, 1, 1 ¼, 1 ½, 1 ¾, 2, 2 ¼, 2 ½ All packs are labeled with the pack part number, the fitting type, dash number and fractional size, and qty contained. Stand can also be supplied with customized blister pack labels showing your address and a contact phone number. Please specify on ordering if you wish to take this option. This entire unit is available for just $ 567.84 + GST (CODE 1) (Part number complete POS-FITTING STAND) Ver 15.06.25 14
AB Seals is also sells individual blister packs from the stand for use at your sales counter. The initial range includes seals and O-Rings for common hydraulic fittings as detailed below. All parts are labeled with the pack part number, fitting type, dash number and fractional size, and quantity contained. The blisterpacks are suitable for use with our mesh stands or any standard mesh slat wall or loop hooks. The initial range consists of 66 products as detailed overleaf, which include O-Rings for BSP, UNO, SAE, ORFS Flaretite seals for JIC Cat D-Rings BSP Retaining rings BSP Bonded washers Plumbing O-Rings and washers Grab n Go Handipaks are a great way to save time and effort on counter sales - simply identify the fitting size and type and direct the customer to the correct Handipak conveniently located in you sales area. Blisterpacks come as standard as shown above but can be supplied with customized labels showing your logo and contact number. Total packs must be ordered in multiples of 30 (ie30, 60, 90 of any combination of packs) to allow for printing of custom labels. Ver 15.06.25 15
PART NUMBER DESCRIPTION LIST PART NUMBER DESCRIPTION LIST PACK-ORBSP02 1/8" BSP O-RING $2.50 PACK-FTJIC30 1 7/8" JIC FLARETITE $41.22 PACK-ORBSP04 1/4" BSP O-RING $5.01 PACK-BWBSP02 1/8" BSP DOWTY $5.62 PACK-ORBSP06 3/8" BSP O-RING $5.01 PACK-BWBSP04 1/4" BSP DOWTY $5.62 PACK-ORBSP08 1/2" BSP O-RING $6.25 PACK-BWBSP06 3/8" BSP DOWTY $6.25 PACK-ORBSP12 3/4" BSP O-RING $7.49 PACK-BWBSP08 1/2" BSP DOWTY $6.88 PACK-ORBSP16 1" BSP O-RING $7.49 PACK-BWBSP10 5/8" BSP DOWTY $8.75 PACK-ORBSP20 1 1/4" BSP O-RING $8.75 PACK-BWBSP12 3/4" BSP DOWTY $9.37 PACK-ORBSP24 1 1/2" BSP O-RING $9.99 PACK-BWBSP14 7/8" BSP DOWTY $6.88 PACK-ORBSP32 2" BSP O-RING $12.50 PACK-BWBSP16 1" BSP DOWTY $7.49 PACK-ORSAE08 1/2" FLANGE O-RING $5.01 PACK-BWBSP20 1 1/4" BSP DOWTY $11.24 PACK-ORSAE12 3/4" FLANGE O-RING $6.25 PACK-BWBSP24 1 1/2" BSP DOWTY $12.50 PACK-ORSAE16 1" FLANGE O-RING $7.49 PACK-RRBSP02 1/8" BSP RETAINER $7.49 PACK-ORSAE20 1 1/4" FLANGE O-RING $5.01 PACK-RRBSP04 1/4" BSP RETAINER $7.49 PACK-ORSAE24 1 1/2" FLANGE O-RING $6.25 PACK-RRBSP06 3/8" BSP RETAINER $7.49 PACK-ORSAE32 2" FLANGE O-RING $7.49 PACK-RRBSP08 1/2" BSP RETAINER $7.49 PACK-ORSAE40 2 1/2" FLANGE O-RING $8.75 PACK-RRBSP12 3/4" BSP RETAINER $9.37 PACK-ORUNO07 7/16" UNO O-RING $3.74 PACK-RRBSP16 1" BSP RETAINER $5.01 PACK-ORUNO09 9/16" UNO O-RING $5.01 PACK-RRBSP20 1 1/4" BSP RETAINER $6.25 PACK-ORUNO12 3/4" UNO O-RING $6.88 PACK-RRBSP24 1 1/2" BSP RETAINER $6.25 PACK-ORUNO14 7/8" UNO O-RING $7.49 PACK-CATD12 3/4 D-RING $11.24 PACK-ORUNO17 1 1/16" UNO O-RING $11.24 PACK-CATD16 1" D-RING $12.50 PACK-ORUNO21 1 5/16" UNO O-RING $7.49 PACK-CATD20 1 1/4 D-RING $6.25 PACK-ORUNO26 1 5/8" UNO O-RING $9.99 PACK-CATD24 1 1/2" D-RING $6.25 PACK-ORUNO30 1 7/8" UNO O-RING $11.87 PACK-CATD28 1 3/4" D-RING $7.49 PACK-ORFS09 9/16" ORFS O-RING $2.50 PACK-CATD32 2" D-RING $7.49 PACK-ORFS11 11/16" ORFS O-RING $2.50 PACK-CATD36 2 1/4 D-RING $8.75 PACK-ORFS13 13/16" ORFS O-RING $3.74 PACK-CATD40 2 1/2" D-RING $8.75 PACK-ORFS16 1" ORFS O-RING $3.74 PACK-OR08 #8 TAP SPINDLE O-RING $2.50 PACK-ORFS19 1 3/16" ORFS O-RING $5.01 PACK-OR08.5 #8.5 TAP SPLINDLE O-RING $2.50 PACK-ORFS23 1 7/16" ORFS O-RING $5.62 PACK-OR09 #9 GARDEN HODE O-RING $2.50 PACK-ORFS27 1 11/16" ORFS O-RING $6.25 PACK-OR10 #10 LAUNDRY ARM O-RING $2.50 PACK-ORFS32 2" ORFS O-RING $6.25 PACK-OR14 #14 PLUMBERS O-RING $2.50 PACK-FTJIC07 7/16" JIC FLARETITE $9.99 PACK-SPOUT ASST ASSORTED SPOUT O-RINGS $2.50 PACK-FTJIC09 9/16" JIC FLARETITE $9.99 PACK-TAP ASST ASSORTED TAP O-RINGS $2.50 PACK-FTJIC12 3/4" JIC FLARETITE $10.62 PACK-GARDEN TAP NUT NUT & TAIL WASHERS $2.50 PACK-FTJIC14 7/8" JIC FLARETITE $12.50 PACK-H'HOLD TAP WASHER FIBRE BODY WASHER 1/2"TAP $3.12 PACK-FTJIC17 1 1/16" JIC FLARETITE $16.24 PACK-GARDEN TAP WASHER FIBRE BODY WASHER 5/8"TAP $2.50 PACK-FTJIC21 1 5/16" JIC FLARETITE $18.73 PACK-13MM BODY WASHER EZKLEEN BODY WASHER $3.12 PACK-FTJIC26 1 5/8" JIC FLARETITE $22.48 PACK-BODY WASHR ASST ASSORTED FIBRE WASHERS $5.01 GRAB n GO HANDIPAKS ALL PACKS ARE PRICE CODE 2 Ver 15.06.25 16
We recommend the following high performance lubricants. Molytec Silicone Lubricant is a hi-performance, translucent paste, which is non-toxic, and has an operating range of -50 to +200 C. Silicone Lubricant has very good water repellency, is oxidation resistant and has good adherence to dry surfaces. It is resistant to tracking and demonstrates very low volatility. This is an ideal assembly and operating lubricant for all oil resistant seals and O-Rings. Available as 25g tube Moly-M897 $ 7.65 + gst 100g tube Moly-M813 $ 22.68 + gst 500g tub Moly-M814 $ 76.41 + gst 2kg tub Moly-M815 $ 289.86 + gst All prices are Code 4 Magnalube-G Teflon Based Grease is one of the best operating lubricants available in the marketplace. It constantly deposits a Teflon film on the contact surface surfaces which continually lubricates and protects against corrosion and wear. Magnalube-G is water resistant and will not migrate from hot surfaces. It is serviceable under load conditions to 7000 psi and is both mechanically and chemically stable. Operating range is from -40 to +290 C. 4 cc Blister Tube $ 5.75 + gst 21 g Tube $ 11.82 + gst 100 g Jar $ 9.56 + gst 250 g Jar $ 23.02 + gst 450 g Cartridge $ 36.42 + gst 500 g Tin $ 41.42 + gst 1 kg Tin $ 75.34+ gst 4 kg Tin $ 273.02 + gst All prices are Code 4 Ver 15.06.25 17