CERTIFICATE BUILT-UP CLADDING PRODUCTS, VETURE, CLADDING PRODUCTS & SOFFIT PRODUCTS ALPHA - ATENA ARANDA ARKEA - AQUILA CSTB hereby certifies that the above products are compliant with the characteristics described in the CERTIFIÉ CSTB CERTIFIED EP 11 certification reference system, revision no. 1, following an assessment performed according to the inspection procedures defined herein. CSTB grants: The company CAREA FAÇADE ZA de Bel Air de Combrée FR-49520 COMBREE Unit site FR-72140 SILLE LE GUILLAUME the right to use the built-up cladding products, veture, cladding products and soffit products CERTIFIÉ CSTB CERTIFIED mark for the products covered by this decision throughout their period of validity and under the conditions stipulated in the general requirements of the CERTIFIÉ CSTB CERTIFIED mark and in the above-mentioned reference system. Admission decision no. 365-114-08 of July 9, 2014 114-08 Unless withdrawn, suspended or amended, this is a valid certificate. Its validity should be verified on the list of holders of the right of use, available at the following address: evlauation.cstb.fr PERFORMANCE CHARACTERISTICS CERTIFIED - Composition - Thickness This certificate comprises 11 pages. Correspondent Jacques PAJARES Tel.: 01 64 68 83 55 - Declared bending strength
page 2/11 Certificate Appendix Decision no. 365-114-08 of July 9, 2014 CERTIFIED CHARACTERISTICS Composition - Product composition validated during the assessment. Overall thickness and its tolerance for cladding ALPHA - ATENA ARANDA ARKEA 25 mm ± 0.5 mm AQUILA 28.5 mm ± 0.5 mm Declared bending strength NF EN ISO 14125 40 MPa
Certificate Appendix Decision no. 365-114-08 of July 9, 2014 Page 3/11 CERTIFICATE APPLICATION FIELD Types of wall cladding (see figure) - Standard cladding element - Reinforced cladding element - Standard veture element - Reinforced veture element Appearance (see table 1, page 6) - Smooth - Structured Colours (see table 2, page 7) - ALPHA: 11 plain colours - ATENA and ATENA Coating: 12 plain colours - ARANDA: 8 plain colours and 16 polychrome colours - ARKEA: 8 plain colours - AQUILA: 8 plain colours and 16 polychrome colours Product marking, applied by the manufacturer Traceability of the production batch: Calendar day (xxx) and reference number of the BMC batch used (xx xxx) Identification of the formulations: Not relevant
AUDITED CHARACTERISTICS Page 4/11 Raw material Glass content according to ISO 1172 Reactivity according to NF EN ISO 12114 According to specifications According to specifications BARCOL hardness NFT 57-106 36 UB Impact strength Internal method D 0.5 3 J ALPHA - ATENA ARANDA ARKEA - AQUILA Range of lengths and their tolerances (for use in cladding) Element Length (mm) Tolerance (mm) Cladding 630 ± 1 Veture 630 ± 4 Range of overall heights and their tolerances (for use in cladding) Element Height (mm) Tolerance (mm) Cladding 636 ± 1.5 Veture 636 ± 4 Other characteristics Thickness of the wall in the lateral strips of fixation Standard (mm) 2.8 ± 0.2 Reinforced (mm) 5 ± 0.35
Page 5/11 AQUILA Range of lengths and their tolerances (for use in cladding) Element Length (mm) Tolerance(mm) Cladding 1 350 ± 1 Veture 1 350 ± 4 Range of overall heights and their tolerances (for use in cladding) Element Height (mm) Tolerance (mm) Cladding 600 ± 1.5 Veture 600 ± 4 Other characteristics Thickness of the wall in the lateral strips of fixation Standard (mm) 4 ± 0.2 Reinforced (mm) 5 ± 0.35 Veture Reference of the glue Type of insulating material Quantity of glue compliant compliant compliant Inspection of appearance of each element - according to internal method
DRAWINGS Page 6/11 Table 1 Appearance Designation Surface appearance Series Standard colour range (table 4) ALPHA range Pierre du Sud Fossilized 400-300 Pierre de Loire Veined 410-310 Pierre d Armor Veined granite 420-320 3 colours Pierre Uni Lisse Plain matt 430-330 ATENA range Pierre du Sud Fossilized 500 Pierre de Loire Veined 510 Pierre d Armor Veined granite 520 3 colours Pierre Uni Lisse Plain matt 530 Ardoise Slate 100 2 colours * Brique Brick 900 2 colours ATENA coating range Pierre du Sud, Pierre de Loire Pierre d Armor, Pierre Uni Lisse Tolède Séville Smooth polychrome Smooth polychrome Smooth plain 500, 510 520, 530 * * * ARANDA range Tolède Séville Smooth polychrome Smooth polychrome Smooth plain 600 6030 3060 3030 1030-3010 ARKÉA range Smooth plain 3030 1030-3010 ( )These colours are obtained by applying an organic coating.
Table 2 - Colour range Page 7/11 ALPHA Pierre du Sud Pierre de Loire Pierre Uni Lisse Blanc 73, Craie 71, Sable 70, Ocre 30, Argent 90, Terre 55, Vert 40, Noir 60 Pierre d Armor 602, 642, 662 Pierre du Sud Pierre de Loire Pierre Uni Lisse Blanc 73, Craie 71, Sable 70, Ocre 30, Argent 90, Terre 55, Vert 40, Noir 60 ATENA Pierre d Armor 602, 642, 662 Slate Noir 60, Terre 55 Brick Terre 55, Flammée 755 ATENA Pierre du Sud Pierre de Loire Pierre Uni Lisse Pierre d Armor Tolède Séville Blanc Andalou T273, Arène T271, Bambou S230, Dune T272, Rose des Sables T280, Lagon T240, Galapagos T290, Volcan T260 Blanc Andalou S273, Arène S271, Bambou S230, Dune S272, Rose des Sables S280, Lagon S240, Galapagos S290, Volcan S260 Gris 7004, Gris lumière 7035, Ivoire 1015, Blanc 9003, Jaune Sable 1002, Rouge Beige 3012, Vert pale 6019, Ocre 30 ARANDA ARKEA AQUILA Tolède Séville Tolède Séville Blanc Andalou T273, Arène T271, Bambou T230, Dune T272, Rose des Sables T280, Lagon T240, Galapagos T290, Volcan T260 Blanc Andalou S273, Arène S271, Bambou S230, Dune S272, Rose des Sables S280, Lagon S240, Galapagos S290, Volcan S260 Gris 7004, Gris lumière 7035, Ivoire 1015, Blanc 9003, Jaune Sable 1002, Rouge Beige 3012, Vert Pale 6019, Ocre 30 Blanc Albertville M190, Jaune Lippi M130, Beige Sarlat M172, Beige Topaze M193, Rose Kalanchoë M120, Gris Tungsten M110, Vert Pale M140, Noir Sikkey M160 Blanc Andalou T273, Arène T271, Bambou T230, Dune T272, Rose des Sables T280, Lagon T240, Galapagos T290, Volcan T260 Blanc Andalou S273, Arène S271, Bambou S230, Dune S272, Rose des Sables S280, Lagon S240, Galapagos S290, Volcan S260 Gris 7004, Gris lumière 7035, Ivoire 1015, Blanc 9003, Jaune Sable 1002, Rouge Beige 3012, Vert Pale 6019, Ocre 30
Page 8/11 Figure 1 ALPHA - ATENA ARANDA ARKEA veture sections VERTICAL SECTION HORIZONTAL SECTION Figure 1b AQUILA veture sections C Mash-off for Mash-off pour fastening holes trous de fixation Star-shaped Renfort étoile reinforcement fastening niveau level fixation 9.5 28 10 10 41 6 R1 Partie Upper haute part vue back arrière view Section Coupe CC CC C 28.5 34 Figure AQUILA Coupe et détail partie haute et sur trou de fixation
Page 9/11 Figure 2 ALPHA and ATENA panels
Figure 3 ARANDA or ARKEA panels Page 10/11 ARANDA or ARKEA 30 x 10 (series 1030) ARANDA or ARKEA 30 x 30 (series 3030) ARANDA or ARKEA 10 x 30 (series 3010) ARANDA or ARKEA 60 x 60 (series 600) ARANDA or ARKEA 60 x 30 (series 3060) ARANDA or ARKEA 30 x 60 (series 6030)
Page 11/11 Figure 3 AQUILA panels 1350 mm A B B 600 AQUILA 135 x 60 cm(h) Face Visible Vue face A Figure AQUILA Face Vue