id EXPERT FITTING AND WASHING GUIDES NHS LOTHIAN CARE HOME YOUR TRUSTED PARTNER IN CONTINENCE CARE www.id-direct.com
A GUIDE TO PRODUCT FEATURES & BENEFITS ANTI LEAKAGE P R O T E C TI O N ANTI-LEAKAGE PROTECTION Integrated anti-leak cuffs made of waterproof material help to prevent side leakage and maintain security and discretion. ODOUR CONTROL An odour control system present in the absorbent core prevents the formation of ammonia and unpleasant odours. PERFECT FIT The shape of the product ensures an anatomical adaptation to the body for maximum comfort and discretion. COTTON FEEL COTTON FEEL A soft textile backsheet provides maximum comfort and discretion. FAST ABSORPTION The acquisition layer promotes fast passage of urine through to a multi-layer absorbent core containing SAP (Super Absorbent Polymers). These are designed to absorb and lock urine inside the core of the pad, reducing the risk of rewetting. AIR SYSTEM The breathable parts of the products contribute to an healthy skin limiting the risk of skin irritations. 02 CONTENTS
CONTENTS CONTENTS id EXPERT FIX ULTRA Fitting guide id EXPERT FIX ULTRA Washing instructions id EXPERT FIX WITH LEGS Fitting guide id EXPERT FIX WITH LEGS Washing instructions id EXPERT LIGHT Fitting guide id FOR MEN Fitting guide id EXPERT FORM Fitting guide id EXPERT SLIP Fitting guide id EXPERT BELT Fitting guide id PANTS Fitting guide 04 05 06 07 08 10 12 14 16 18 CONTENTS 03
id EXPERT FIX ULTRA Fitting guide First: measure the patients waist; take into consideration the patients hip measurement also the measurement around the top of the leg. (The reason for this is that a patient s proportion may vary; some patients may have larger legs in proportion to their waist and the same may apply for the measurements of the waist and hips). Pull the fixation pants up to the level of the knees turning the pant back on its self; this will give a clearer working area, then insert and fit the pad from the front When the pad is in place, pull up the pants ensuring the pad is intimate with the perineum (groin area) and that the legs of the pants are secure around the top of the leg, not too tight and should not be tucked up into the groin area. The pant legs should encompass the upper thigh. It is recommended that the pants are not cut in order to make them fit. When changing the pad, roll the fixation pant down to the knee level again, removed soiled pad from the rear Change pants if they are wet, have faeces or blood present When fitting a new pad repeat the fitting technique These pants are re-usable, wash as required. 04 id EXPERT FIX ULTRA
id EXPERT FIX ULTRA id EXPERT FIX ULTRA Washing instructions Machine wash at 60 C Do not tumble dry Do not use bleach or fabric conditioner Do not iron ATTENTION POINTS Use standard washing detergents, such as those used for home laundry. Do not use bleach and do not use excessive heat. SOME POINTERS Make sure the net pants are dry before using them. Do not cut the pants or tuck into the groin Most washing machinery operates most effectively at 80%. Loading, for example, a 10 kg machine should only have at most an 8 kg load. Product name Size Colour id code Waist size Ultra M 5400200250 80-20cm Ultra L 5400300250 100-130cm Ultra XL 5400400250 120-150cm Ultra XXL 5400500250 140-175cm id EXPERT FIX ULTRA 05
id EXPERT FIX WITH LEGS Fitting guide Firstly measure the patient s waist, taking into consideration the hip measurement, and also the measurement around the top of the leg. The reason for this is that a patient s proportion may vary; some patients may have larger legs in proportion to their waist and the same may apply for the measurements of the waist and hips. Pull the fixation pants up to be level with the knees, turning the pant back on its self. This will give a clearer working area, then insert and fit the pad from the front. When the pad is in place, pull the pants up, ensuring that the pad is intimate with the perineum (groin area), and that the legs of the pants are secure around the top of the leg. They should not be too tight, and they should not be tucked up into the groin area. The pant legs should encompass the upper thigh. It is recommended that the pants are not cut in order to make them fit. When changing the pad, roll the fixation pant back down to the knee level, remove the soiled pad from the rear. Change pants if they are wet, have faeces or blood present. When fitting a new pad repeat the fitting technique. These pants are reusable, wash as required (please refer to washing guidelines for net pants). 06 id EXPERT FIX WITH LEGS
id EXPERT FIX WITH LEGS id EXPERT FIX WITH LEGS Washing instructions Machine wash at 60 C Do not tumble dry Do not use bleach Do not iron ATTENTION POINTS Use standard washing detergents, such as those used for home laundry. Do not use bleach and do not use excessive heat. Most washing machinery operates most effectively at 80%. Loading, for example a 10 kg machine should only have at most an 8 kg load. SOME POINTERS Label the pants with the patients name. Do not use pants for other patients. Make sure the pants are dry before using them. Do not cut the pants. id FIX NET PANTS AVAILABLE WAIST SIZES Small (Comfort Super) Small (With Legs) Medium (Ultra) Medium (Comfort Super) Medium (With Legs) Large (Ultra) Large (Comfort Super) Large (With Legs) X-Large (Ultra) X-Large (Comfort Super) X-Large (With Legs) XX-Large (Ultra) XX- Large (Comfort Super) XX-Large (With Legs) XXX-Large (Comfort Super) 40-80cm 50-75cm 80-120cm 60-100cm 70-90cm 100-130cm 80-120cm 85-110cm 120-150cm 100-160cm 105-130cm 140-175cm 140-160cm 115-140cm 180-195cm id EXPERT FIX WITH LEGS 07
id EXPERT LIGHT id Expert Light are pads designed for the small urinary losses caused by bladder weakness. Shaped like feminine towels, this range of products provides maximum discretion and security due to its anatomical fit. STEP 1 Start by gently unfolding the product, smooth and flatten, then halve the pad lengthways forming a cupped shape in the central area of the pad. The elasticated area will naturally assist in shaping and cupping the pad which, in turn, will help achieve a close, secure fit. STEP 2 id Expert Light are anatomically shaped pads which are designed to fit closely to the body. When using these pads the wider end should always be placed to the back and the smaller, narrower end to the front. 08 id EXPERT LIGHT
id EXPERT LIGHT STEP 3 Remove the paper from the adhesive strip which runs lengthways along the middle of the back of the pad. Stick the pad onto the crotch area of the pants, carefully positioning it so that any urine that escapes will go into the central area of the pad. STEP 4 Pull the pants up, ensuring that the newly applied pad remains in place and fits closely to the groin. id Expert Light incontinence pads should always be worn with close fitting underwear. id EXPERT LIGHT 09
id FOR MEN id for Men are ideal for managing light urinary incontinence in men. The male-specific design enhances comfort and security, while the shape and adhesive strip ensure a secure fit. These products should always be worn with id Expert Fix net pants which help keep the product correctly in place, or the patient s own close fitting underwear. STEP 1 Start by pulling down the underwear to the knees. STEP 2 Unfold the id for Men pad and remove the paper from the adhesive strip. STEP 3 Ensuring the wider part of the product is at the front, place the pad inside the underwear making sure the adhesive strip is securely fastened. 10 id FOR MEN
id FOR MEN STEP 4 Finally, pull up the underwear and adjust for comfort and security. It is not recommended that id for Men pads are worn with loose fitting underwear, for example cotton boxer shorts. We advise the use of tight fitting boxer shorts which do keep all types of pads in place securely, however with cotton boxer shorts there is no fixation. If this is not available, the patient should use id Expert Fix net pants instead. id FOR MEN 11
id EXPERT FORM id Expert Form are anatomically shaped pads offering an ideal solution for managing moderate to heavy incontinence in mobile or semi-mobile patients. These products provide high levels of absorption, making the user feel dry and comfortable. These products should always be worn with id Expert Fix net pants which help keep the product correctly in place, or the patient s own close fitting underwear. STEP 1 Start by pulling the id Expert Fix net pants up to just above the knee, with the top folded down in preparation for securing the pad. Fold the id Expert Form in half lengthways and gently channel, this activates the anti-leak cuffs. STEP 2 Pass the pad between the legs from front to back with the back sheet turned away from the skin, then centre the pad by using the wetness indicators as a guide. If the patient is immobile, gently roll them onto their side with one leg slightly raised to prevent them from falling and, with safety in mind, bend the knees to create a channel between the legs. STEP 3 Fan out both the back and the front of the pad horizontally to create a channel shape between the legs. Then smooth out the product, front and back. 12 id EXPERT FORM
id EXPERT FORM STEP 4 Pull up the pants to fit securely over the product, ensuring the pants are fitted well at the top of the legs and that the pad remains closely fitted at the groin. Adjust the pad and pants if required to ensure the user feels comfortable and secure. Remember id Expert Form pads should always be worn with close fitting elasticated underwear or id Expert Fix net pants. id EXPERT FORM 13
id EXPERT SLIP id Expert Slip are All-in-One briefs which offer an effective solution for managing moderate to heavy incontinence. With a high level of absorption, the All-in-Ones provide the user with anti-leakage security and optimal comfort. They are particularly recommended for people with limited mobility or who are confined to bed. STEP 1 Hold each end of the All-in-One and gently pull it open to activate the anti-leak cuffs STEP 2 If the client is mobile insert the product between the patients legs from the front, arrange the product over the abdomen and buttocks. If the client is immobile begin by gently rolling them onto their side, insert the pad in the direction best suited to the users body shape ensuring the pad remains halved lengthways and cupped in the middle. 14 id EXPERT SLIP
id EXPERT SLIP STEP 3 Securely fix the top two tabs in position to create a snug fit at the waist. If necessary, change the positioning to suit the user s body shape. The tabs can be fixed in either an angled or straight position STEP 4 Secure both bottom tabs in position, ensuring a secure fit around the leg. The All-in-One requires a close fit at the groin. The tabs can be fixed in either an angled or straight position, re-applying if necessary. id EXPERT SLIP 15
id EXPERT BELT id Expert Belt are belted briefs designed for managing moderate to heavy incontinence in active and independent people. They are also recommended for people with limited mobility or those who require assistance. STEP 1 Start by unfolding the id Expert Belt, opening it out first from right to left, and then from left to right. Fold the id Expert Belt in half lengthways and gently channel it by running your fingers underneath the back sheet. This activates the anti-leak cuffs. STEP 2 Stand next to the patient and fasten the belt around their waist by means of the hook and loop tabs. Next, bring the pad upwards between the legs, taking care to maintain the cupped shape. If the patient is immobile, gently roll them onto their side and insert the id Expert Belt between their legs from front to back. Next, place them onto their back, and pull the pad out at the front, whilst taking care to maintain the channel shape. 16 id EXPERT BELT
id EXPERT BELT STEP 3 Arrange and smooth the pad over the abdomen and buttocks. Pull out the front of the pad until it is completely open, and secure both ends to the belt using the two hook and loop fastenings. STEP 4 Finally, ensure the pad is fitted securely and comfortably between the legs and the groin area. AVAILABLE WAIST SIZES: Medium Large 70-115cm 95-135cm id EXPERT BELT 17
id PANTS id Pants offer an ideal solution for managing moderate to heavy urinary incontinence. id Pants can be worn and taken off like any regular underwear. These products combine comfort and discretion due to their elasticated waist and CottonFeel backsheet. STEP 1 Start by folding the id Pants in half lengthways to activate the anti-leak cuffs. STEP 2 Ensuring the sticker is at the back, step into the id Pants and pull them up, adjusting for comfort and security. 18 id PANTS
id PANTS STEP 3 Remove the id Pants by either pulling them down or tearing the side seams. STEP 4 Once removed, simply roll-up the pad and dispose of carefully. AVAILABLE WAIST SIZES: Extra Small Small Medium Large Extra Large 50-70cm 60-90cm 80-120cm 100-145cm 130-170cm id PANTS 19
ONTEX HEALTHCARE UK LTD 2nd Floor, Weldon House Corbygate Business Park Priors Haw Road Weldon North Corby Northamptonshire NN17 5JG TEL: 01536 269744 www.id-direct.com v2