GN NetTest CMA4000 CMA4453M Specs Provided by www.aaatesters.com SPECIFICATION SHEET CMA4000i OPTICAL TEST SYSTEM Mainframe Specifications Display Floppy Drive Keyboard I/O Ports Hard Drive Dimensions (H x W x D) Weight Power Power Supply Battery Battery Life Recharge Time VGA LCD Display (.3 cm (8.4 inch) color or 0.8 cm (8. inch) monochrome) 3.5 inch Intergral alpha-numeric, external keyboard (optional) Standard: () RS-3 Serial, () Parallel, VGA, Mouse, and () PS/ External Keyboard Port Gigabytes (minimum) 4. x 34.3 x 9.5 cm (9.5 x 3.5 x 3.75 inches) 4.9 kg (.0 lbs.) Includes mainframe, battery and module Autoswitching 00-3 VAC, 47-63 Hz, 84-50 VAC, 47-63 Hz, 0-5 VDC () Sealed lead acid battery pack 6 hours typical, depending on operating mode.5 - hours Environmental Operation AC Power Battery Temperature 0º C to 45º C (3º F to º F) 0º C to 40º C (3º F to 04º F) Humidity 95% RH max., non-condensing 95% RH max., non-condensing Maximum Altitude 5,40 meters (50,000 feet) 5,40 meters (50,000 feet) Storage Temperature -5º C to 60º C (-3º F to 40º F) Humidity 95% RH max., non-condensing Maximum Altitude 5,40 meters (50,000 feet) Ordering Information CMA4000i Includes: Floppy drive, operator s manual, Understanding OTDR training manual, AC charger/adapter, two batteries, carry strap, protective display cover, serial data transfer kit and choice of AC power cord (select one from below) Mainframe Selection (required) TD-4XXE Select Display Option = Monochrome Display = Color Display Available for use with OTDR modules Color display required for use with OSA modules Select Hard Drive Option = No Hard Drive (OTDR Only) 3 = Hard Drive Option 4 = Hard Drive & DOS 6. Option 5 = Hard Drive & Windows 95 Option AC Power Cord Options TD-685 US/Japan AC power cord TD-30358 European AC power cord TD-30359 UK AC power cord TD-30360 Swiss AC power cord TD-3036 Australian AC power cord TD-3036 Italian AC power cord (formerly GN Nettest)
OTDR Specifications Module 445 445 4436 4439 444 4453 4454 4456 4457 4473 4476 4498 Center Wavelength 30 nm ±0 nm 30 nm ±0 nm 30 nm ±0 nm 30 nm ±0 nm 850 nm ±0 nm 30 nm ±0 nm 30 nm ±0 nm 850 nm ±0 nm 850 nm ±0 nm 550 nm ±0 nm 550 nm ±0 nm 550 nm ±0 nm 550 nm ±0 nm 550 nm ±0 nm 550 nm ±0 nm 550 nm ±0 nm 300 nm ±0 nm 550 nm ±0 nm 40 nm ±0 nm 300 nm ±0 nm 300 nm ±0 nm 65 nm ±0 nm 65 nm ±0 nm 65 nm ±0 nm 550 nm ±0 nm 30 nm ±0 nm 30 nm ±0 nm 65 nm ±0 nm 550 nm ±0 nm 550 nm ±0 nm Fiber Type Single-mode Single-mode Single-mode Single-mode Multimode Single-mode Single-mode Multimode and Multimode and Single-mode Single-mode Single-mode Single-mode Single-mode Spectral Width 30 nm: <0 nm 30 nm: <0 nm 30 nm: <0 nm 30 nm: <0 nm 850 nm: <0 nm 30 nm: < nm 30 nm: < nm 850 nm: <0 nm 850 nm: <0 nm 550 nm: <0 nm 550 nm: <0 nm 550 nm: <5 nm (RMS) 550 nm: <0 nm 550 nm: <0 nm 550 nm: <0 nm 550 nm: <5 nm 300 nm: <0 nm 550 nm: < nm 40 nm: < nm 300 nm: <0 nm 300 nm: <0 nm 65 nm: <0 nm 65 nm: <0 nm 65 nm: < nm 550 nm: < nm 30 nm: <0 nm 30 nm: <0 nm 65 nm: < nm 550 nm: <0 nm 550 nm: <0 nm Dynamic Range 30 nm: 30 db 30 nm: 36 db 30 nm: 40 db 30 nm: 43 db 850 nm: 3 db 30 nm: 40 db 30 nm: 36 db 850 nm: 3 db 850 nm: db 550 nm: 34 db 550 nm: 40 db 550 nm: 50 db 550 nm: 8 db 550 nm: 34 db 550 nm: 40 db 550 nm: 46 db 300 nm: 6 db 550 nm: 40 db 40 nm: 36 db 300 nm: 5 db 300 nm: 4 db 65 nm: 36 db 65 nm: 40 db 65 nm: 40 db 550 nm: 36 db 30 nm: db 30 nm: 33 db 65 nm: 36 db 550 nm: db 550 nm: 3 db Initial Reflective 30 nm: 3 meters 30 nm: 3 meters 30 nm: 3.5 meters 30 nm: 3 meters 850 nm: 3.5 meters 30 nm: 3.5 meters 30 nm: 3.5 meters 850 nm: 3.5 meters 850 nm: 4.5 meters 550 nm: 4 meters 550 nm: 4 meters 550 nm: 4.5 meters Deadzone 550 nm: 3 meters 550 nm: 3 meters 550 nm: 3.5 meters 550 nm: 3.5 meters 300 nm: 3 meters 550 nm: 3.5 meters 40 nm: 3.5 meters 300 nm: 3.0 meters 300 nm: 4.5 meters 65 nm: 4 meters 65 nm: 4 meters 65 nm: 3.5 meters 550 nm: 3.5 meters 30 nm: 3 meters 30 nm: 4.0 meters 65 nm: 3.5 meters 550 nm: 3 meters 550 nm: 3.5 meters Initial Non-Reflective 30 nm: 0 meters 30 nm: 0 meters 30 nm: 6 meters 30 nm: 0 meters 850 nm: 6.5 meters 30 nm: 7.0 meters 30 nm: 7.0 meters 850 nm: 6.5 meters 850 nm: 8 meters 550 nm: meters 550 nm: meters 550 nm: meters Deadzone 3 550 nm: meters 550 nm: meters 550 nm: 6 meters 550 nm: 0 meters 300 nm: 7 meters 550 nm: 7.0 meters 40 nm: 7.0 meters 300 nm: 7 meters 300 nm: 9 meters 65 nm: 7 meters 65 nm: 7 meters 65 nm: 7.0 meters 550 nm: 7.0 meters 30 nm: 0 meters 30 nm: meters 65 nm: 7.0 meters 550 nm: meters 550 nm: meters Linearity.04 db/db.04 db/db.04 db/db.04 db/db.04 db/db.04 db/db.04 db/db.04 db/db.04 db/db.04 db/db.04 db/db.04 db/db Pulsewidth 0 ns to 0 µs 0 ns to 0 µs 0 ns to 0 µs 0 ns to 30 µs 4 ns to µs 0 ns to 0 µs 0 ns to 0 µs 4 ns to 0 µs 4 4 ns to 0 µs 4 0 ns to 0 µs 0 ns to 0 µs 0 ns to 30 µs Distance Resolution 0.000 km; 0.000 km; 0.000 km; 0.000 km; 0.000 km; 0.000 km; 0.000 km; 0.000 km; 0.000 km; 0.000 km; 0.000 km; 0.000 km; 0. meters; 0. meters; 0. meters; 0. meters; 0. meters; 0. meters; 0. meters; 0. meters; 0. meters; 0. meters; 0. meters; 0. meters; 0.00 kft, 0.00 kft, 0.00 kft, 0.00 kft, 0.00 kft, 0.00 kft, 0.00 kft, 0.00 kft, 0.00 kft, 0.00 kft, 0.00 kft, 0.00 kft, ft, 0.000 mi ft, 0.000 mi ft, 0.000 mi ft, 0.000 mi ft, 0.000 mi ft, 0.000 mi ft, 0.000 mi ft, 0.000 mi ft, 0.000 mi ft, 0.000 mi ft, 0.000 mi ft, 0.000 mi Distance Sampling 0.5, 0.5,, 0.5, 0.5,, 0.5, 0.5,, 0.5, 0.5,, 0.5, 0.5,, 0.5, 0.5,, 0.5, 0.5,, 0.5, 0.5,, 0.5, 0.5,, 0.5, 0.5,, 0.5, 0.5,, 0.5, 0.5,, (range dependent), 4, 8, 6 meters, 4, 8, 6 meters, 4, 8, 6 meters, 4, 8, 6 meters, 4, 8 meters, 4, 8, 6 meters, 4, 8, 6 meters, 4, 8, 6 meters 4, 4, 8, 6 meters 4, 4, 8, 6 meters, 4, 8, 6 meters, 4, 8, 6 meters Distance Range /4/8/6/3/ /4/8/6/3/ /4/8/6/3/ /4/8/6/3/ /4/8/6/3/64 km /4/8/6/3/ /4/8/6/3/ /4/8/6/3/ /4/8/6/3/ /4/8/6/3/ /4/8/6/3/ /4/8/6/3/ Setting 64/8/56 km 64/8/56 km 64/8/56 km 64/8/56 km 64/8/56 km 64/8/56 km 64/8/56 km 4 64/8/56 km 4 64/8/56 km 64/8/56 km 64/8/56 km Loss Resolution 0.00 db 0.00 db 0.00 db 0.00 db 0.00 db 0.00 db 0.00 db 0.00 db 0.00 db 0.00 db 0.00 db 0.00 db Additional OTDR Specifications OTDR/Source Connector Adapter Options Notes Laser Safety Meets CDRH Class Requirements (Eye Safe) CFR Distance Accuracy 0.005% of distance measurement + distance resolution + index uncertainty Group Refractive Index Setting.400000 -.699999 Loss Modes ORL, -point, -point LSA, db/km, db/km LSA, splice, dual splice loss, reflectance Trace Compare Modes 4 Trace Overlay, Delta Trace Compare, Align, Stack Data Acquisition Real Time, Fast Scan, Medium Scan, Slow Scan, Timed Average (user selectable) Information Output Trace display, event table, integrated trace display with event information window, header page, measurement parameters, ASCII report, overlay template Analysis Automated high speed fiber analysis Vertical Scale Settings 0.5/0.5/0.5///4/8 db (module dependent) Horizontal Scale Settings 0.00 km/div. to 0.448 km/div @ km; 0.00 km/div. to 57.304 km/div. @ 56 km (IOR =.5) Stored Data Points 6,000 Language Capability Dial-a-language (English, Chinese, Spanish, Portuguese, French, Russian, German, Italian, Swedish, Korean, Hungarian) Mass Storage Over 65,000 traces with hard drive. Up to 80 traces for a standard 8.89 cm (3.5 inch),.44 MB floppy disk. Up to 5 traces internal storage. Adapters for Ultra Polish UC-30-5 DIN 4756 UC-30-0 D4 UC-30-5T FC UC-30-30T ST UC-30-35 SMA 905/906 Adapters for Angle Polish UC-30-60 FC NTT UC-30-60A FC Seiko Giken UC-30-65 SC UC-30-40 Diamond HP HMS-0 UC-30-45 Diamond HMS-0 UC-30-50 Diamond HMS-0/A UC-30-55A SC UC-30-70 DIN/HRL-0 UC-30-75 ST UC-30-80 Diamond E-000 SNR= with up to 56k averages (Typical, subtract approximately.7 db of range for 98% peak noise. Bellcore TR-TSY-00096 Issue ). Using Bellcore TR-TSY-00096 Issue (typical). 3 Deadzones measured on -45 db reflections (typical). 4 Wavelength dependent.
OTDR Module Ordering Information Part Number TD-4MXX XX-X Enter last two digits of module number Select Power Meter (for OTDR modules 445, 445, 4436, 4439, 444, and 4456) 0 = No power meter = 0 dbm Power Meter = 0 dbm Power Meter Select Power Meter (for OTDR modules 4453, 4454, 4473, and 4476) 0 = No Power Meter 3 = 0 dbm InGaAs Power Meter 4 = 0 dbm InGaAs Power Meter Note: No Power Meter Options for module 4498 Select Light Source Option 0 = No Light Source = Dual wavelength with only dual optical module = Single wavelength with only single optical module Note: no light source option for 4498 or multimode wavelength modules Select Connector polish for Modules = Ultra PC Single-mode 3 = Angled PC Single-mode 4 = 6.5 µm PC Multimode (444X modules only) 6 = 6.5 µm PC MM / Ultra PC SM (4456 and 4457 modules only) 7 = 6.5 µm PC MM/ Angled PC SM (4456 and 4457 modules only) VFL Module Available VFL-XX (FC, SC, ST - fixed connectors) Optical Spectrum Analyzer (OSA) Specifications Module 479 NI 479 Wavelength range 50-570 nm 50-60 nm Wavelength accuracy ±0 pm (typical) ±0 pm (typical) Resolution bandwidth <0.05 nm <0.05 nm Power Range +0 to -70 dbm per channel +0 to -70 dbm per channel +0 to -60 dbm per channel * Polarization dependence <±0.5 db <±0.5 db Channel table Automatically generated, Automatically generated, up to 400 channels up to 400 channels Return Loss <35 db <35 db Cyclic Time 4 seconds maximum 4 seconds maximum Stability ±0. db per hour ±0. db per hour Power accuracy ±0.5 db (3 C) ±0.5 db (3 C) Modes of Operation Acquisitions Language Capability Graph, Table and Drift Modes Real Time, Average, Peak Hold and Channel Drift English * Model 479 only
Multi-Test Functions Single-mode Light Source (factory installed) Wavelengths Output Transmission Mode Output Fiber Optical Connector Stability Spectral Width Safety -8 dbm (minimum) CW, KHz 9/5 µm SM fiber ±0. db (8 hours) Power Meter (factory installed) Detector Type Range mm Ge PIN photodiode or InGaAs photodiode 3 +0 to -55 dbm or +0 to -45 dbm with AM460 filter Calibrated Wavelengths 850, 30, 40, 550, 65 nm 3 Power Meter Connector Options (select one when ordering power meter) AM-430-5 D4 AM-430-0 SMA 906 AM-430-5 Diamond GFS-3 AM-430-45 FC AM-430-50 ST AM-430-75 AM-430-85 AM-430-90A AM-430-95 AM-430-00 VFO/PFO DIN SC E000 FDDI Universal Connector Resolution Store Reference Mode Accuracy Linearity Yes (use AM-430-xx adapter caps) 0.0 db, 0.0% Watts Yes ±4% (±0.8 db) @ +5 dbm to -50 dbm ±8% (±0.36 db) @ + 0 dbm to +5 dbm and @ -50 dbm to -55 dbm ±0.04 db, +5 dbm to -50 dbm Visual Fault Locator (field installed) Wavelength Output Transmission Mode Output Fiber 650 ±0 nm 0 dbm CW or Hz 9/5 µm, SM fiber VFL Connector Options FC, SC, ST - fixed connector Safety IEC 85 Class, FDA ( CFR 040. 0 Class ) Notes Specification applies to +0 dbm meter. Available with 40 nm light source only 3 Available with 65 nm light source only
Optional Accessories (must be added as separate line item) TD-400A TD-40 TD-40 TD-45 TD-405 TD-40 TD-309 TD-409 TD-453 TD-96 Hard case w/handle & wheels Hard transit case Deluxe soft case Soft carry bag Printer w/cable Tripod Printer paper (5 rolls) Case of paper (5 rolls) V lead acid battery V DC power adapter TD-430 TD-435 TD-3063 TD-3599 TD-459US TD-459GE TD-459FR TD-459SP TD-459IT CMA serial transfer data kit Display cover OTDR User s Manual OSA User s Manual US style keyboard German CE style keyboard French CE style keyboard Spanish CE style keyboard Italian CE style keyboard FiberConnect Bare Fiber Testing Adapters (Single-mode) Ultra FiberConnect--UFC FiberConnect--USC FiberConnect--UST Angled FiberConnect--AFC FiberConnect--ASC Test Fiber Boxes (XXX-XXX = Connector Style) FB-XXX-XXX-SM-300M FB-XXX-XXX-M5-00M FB-XXX-XXX-SM-K0M FB-XXX-XXX-M6-00M FB-XXX-XXX-SM-5K0M Standard fiber lengths Single-mode (SM) - 300m, Km, and 5Km Multimode (MM) - 00m Standard Connectors (SM and MM) UFC-UFC UST-UST USC-USC Additional connector styles, combinations and lengths for the Fiber Test Boxes are available upon request. FS Series Microscopes FS-00 Fiber Microscope with 00x optics FS-00C Fiber Microscope with 00x optics with coaxial illumination FS-400C Fiber Microscope with 400x optics with coaxial illumination NetTest, Optical Division 6 Rhoads Drive, Utica, New York, USA. Tel: + 35 66 5000. FAX: + 35 798 4038 E-Mail: marketing-ont@nettest.com Web: www.nettest.com NetTest Companies Australia +6 39 890 6677 Brazil +55 5505 6688 Canada + 905 479 8090 China +86 0 64 67 98 88 France +33 30 08 88 88 Germany +49 89 99 89 00 Italy +39 0 95 6 Mexico +5 5557 848 Nordic +45 7 3 00 Singapore +65 0 9575 Spain +34 9 37 9 7 Sweden +46 8 555 40 65 UK +44 883 3490 USA + 978 983 3800 NetTest develops, manufactures and markets advanced equipment and systems for the test and measurement of telecommunication, data communication and optical networks. We provide vendors, carriers, enterprises and research laboratories with the network testing solutions they need to troubleshoot and optimize performance in today s complex, hybrid networks and in those planned for tomorrow. NetTest undertakes a continuous and intensive product development program to ensure that its instruments and systems perform to the highest technical standards. As a result, the specifications in this document are subject to change without notice. ISO 900 certified. RevA 0/0 (formerly GN Nettest)