Year : API 0 Fire Safe Certified New Innovative Patented Design Page
Year : Introduction Easy to operate and reliable in use. Applications Crude oil product (Tankers) Chemical Tankers. LPG and LNG carriers. Rigs. Refineries. Terminals. Chemical and Petrochemical industries. Wherever you require security When blinding Chemicals. Oils. Solvents. Gases. Water. (Steam saturated). The design meets the requirements of Full segregation between dierent uids. Double shut off (DBB). Safety against incorrect operation. Drainage of valve body (DBB). Visual inspection Quality product. Simple and efficient design. Small over all dimensions. Full flow. VALVE OPEN Top cover in position and valve discs removed. FREE FLOW VALVE CLOSED Valve discs in position cover plates removed. 00% TIGHT Page
Year : Line Blind Valve Models, Figure Numbers and Features Figure 00 The Classic Double Block & Bleed Line Blind Valve. Easy operation, trouble-free service. When closed no liquid or gas can leak to the oposite side, up- and downstream fluids are fully segregated (Double Block & Bleed).. One person can operate "~" valves, people can operate the larger sizes "~".. Simple and solid construction requires minimum maintenance.. Short face to face length.. Several Flange Standards available, ANSI/ASME, DIN, JIS, etc.. When the valve is closed the top cover can be removed to inspect the valve's body cavity for possible leakage (Double Block. & Bleed). Plug in cavity bottom to bleed out leaked fluid. Figure 0 Figure 0 Double Block & Bleed Expanding Gate Valve. Quick operation, trouble-free service. When closed no liquid or gas can leak to the oposite side, up- and downstream fluids are fully segregated (Double Block & Bleed).. Simple and solid construction requires minimum maintenance.... Only one person needed to operate, saves time and energy... Several Flange Standards available, ANSI/ASME, DIN, JIS, etc. Easy to operate, no contact with the pipeline fluids, internals do not have to be removed when opening the valve. No tools required to operate the valve, just turn the handwheel to open/close the valve When the valve is closed the valve cavity can be inspected, by removing the drain plug, for possible leakage (Double Block. & Bleed) Plug in cavity bottom to bleed out leaked fluid. Double Block & Bleed Expanding Gate Valve with Automatic Bleed System As Figure 0 however with automatic bleed system.. Cavity Bleed opens automatically when valve is closed and closes automatically when valve opens Figure 0 The New Innovative Design Double Block & Bleed Line Blind Valve As Figure 00 however with special device to quickly remove the valve internals. Quick and easy removal of the valve internals Page
Year : Figure 00 H 0 Size DN0~DN00( ~ ) Pressure class DIN PN0 / / / 0 JIS 0K / K / 0K / 0K ANSI 0LBS T ØG DNV TYPE APPROVED PCD ØJ L ØM-N MATERIALS LIST NO. PART NAME TYPE S.S. TYPE C.S. BODY A Gr.CFM(MoMin.%) A Gr.WCB DISC A Gr.CFM(MoMin.%) AISI 0 TIGHTENING NUT A Gr.CFM(MoMin.%) AISI 0 DISC SEAL PTFE PTFE STOP PIN AISI AISI 0 TOP COVER SEAL KEMFLON+PTFE KEMFLON+PTFE TOP COVER BOLTS AISI AISI 0 SPRING STAINLESS STEEL STAINLESS STEEL TOP COVER A Gr.CFM(MoMin.%) A Gr.WCB 0 WASHER AISI AISI 0 TOP COVER NUT AISI AISI 0 DRAIN PLUG SEAL PTFE PTFE DRAIN PLUG AISI AISI 0 S.S. Stainless Steel(MoMin.%) C.S. Cast Steel(GS-C) Page
Year : Figure 00 0 PART LIST DIMENSIONS Unit:mm NO. PART NAME BODY DISC TIGHTENING NUT DISC SEAL STOP PIN TOP COVER SEAL TOP COVER BOLTS SPRING TOP COVER 0 WASHER TOP COVER NUT DRAIN PLUG SEAL DRAIN PLUG SIZE øg H øj L øm N T PN 0.0.0.0.0 M.0 " PN.0.0.0.0 M.0 PN.0.0.0.0 M.0 PN 0.0.0.0.0 M.0 PN 0.0.0.0.0 M.0 -/" PN.0.0.0.0 M.0 PN.0.0.0.0 M.0 PN 0.0.0.0.0 M.0 PN 0 00.0.0 0.0.0 M.0 " PN 00.0.0 0.0.0 M.0 PN 00.0.0 0.0.0 M.0 PN 0 00.0.0 0.0.0 M.0 PN 0 0.0.0 0.0.0 M 0.0 " PN 0.0.0 0.0.0 M 0.0 PN.0.0 0.0.0 M0 0.0 PN 0.0.0 0.0.0 M0 0.0 PN 0 0.0.0 0.0.0 M.0 " PN 0.0.0 0.0.0 M.0 PN 0.0.0 0.0.0 M.0 PN 0 0.0.0 0.0.0 M.0 PN 0.0.0 0.0.0 M0.0 " PN.0.0 0.0.0 M0.0 PN 00.0.0 0.0.0 M.0 PN 0 00.0.0 0.0.0 M.0 PN 0 0.0 00.0.0.0 M0.0 " PN 0.0 00.0.0.0 M0.0 PN 0.0 00.0 0.0.0 M.0 PN 0.0 00.0 0.0.0 M.0 PN 0.0 0.0 0.0 00.0 M0.0 0" PN 0.0 0.0.0 00.0 M.0 PN.0 0.0 0.0 00.0 M.0 PN 0 0.0 0.0.0 00.0 M0.0 PN 0.0 0.0 00.0 00.0 M0.0 " PN 0.0 0.0 0.0 00.0 M.0 PN.0 0.0 0.0 00.0 M.0 PN 0.0 0.0 0.0 00.0 M0.0 "- " 0"- " Page
Year : 0 H T Figure 00 ØG Size DN0~DN0( ~0") Pressure cless class DIN PN0 / / / 0 JIS 0K / K / 0K / 0K ANSI 0LBS ØM-N PCD ØJ L MATERIALS LIST NO. PART NAME TYPE S.S. TYPE C.S. BODY A Gr.CFM(MoMin.%) A Gr.WCB DISC-BOLT A Gr.CFM(MoMin.%) AISI 0 DISC-ROD A Gr.CFM(MoMin.%) AISI 0 TIGHTENING-DISC A Gr.CFM(MoMin.%) AISI 0 SEEGER-RING AISI AISI FRICTION WASHER PTFE PTFE PRESSURE WASHER BRONZE BRONZE DISC SEAL PTFE PTFE STOPPER AISI AISI 0 0 TOP COVER SEAL KEMFLON+PTFE KEMFLON+PTFE TOP COVER A Gr.CFM(MoMin.%) A Gr.WCB TOP COVER BOLTS AISI AISI 0 SPRING STAINLESS STEEL STAINLESS STEEL COVER -BAR A Gr.CFM(MoMin.%) A Gr.WCB WASHER AISI AISI 0 TOP COVER NUT AISI AISI 0 DRAIN PLUG AISI AISI 0 DRAIN PLUG SEAL PTFE PTFE S.S. Stainless Steel(MoMin.%) C.S. Cast Steel(GS-C) Page
Year : DIMENSIONS Unit:mm SIZE øg H øj L øm N T Figure 00 " " " 0" " PN 0 0.0 0.0 0.0 0.0 M0.0 PN 0.0 0.0 0.0 0.0 M.0 PN 0.0 0.0.0 0.0 M.0 PN 0.0 0.0.0 0.0 M.0 PN 0.0 0..0 0.0 M 0.0 PN 0.0 0..0 0.0 M 0.0 PN 0 0.0.0 0.0.0 M 0.0 PN.0.0 0.0.0 M0 0.0 PN 0 0.0 0.0.0 0.0 M 0 0.0 PN.0 0.0 0.0 0.0 M0 0 0.0 PART LIST NO. PART NAME 0 BODY DISC-BOLT DISC-ROD TIGHTENING-DISC SEEGER-RING FRICTION-DISC PRESSURE-DISC DISC SEAL STOPPER 0 TOP COVER SEAL TOP COVER TOP COVER BOLTS SPRING COVER-BAR WASHER TOP COVER NUT DRAIN PLUG DRAIN PLUG SEAL Page
Year : ØG 0 0 MATERIALS LIST NO. PART NAME TYPE S.S. TYPE C.S. DRAIN PLUG AISI AISI 0 DRAIN PLUG SEAL PTFE PTFE BODY A Gr.CFM(MoMin.%) A Gr.WCB DISC A Gr.CFM(MoMin.%) A Gr.WCB DISC SEAL PTFE PTFE BOLT AISI AISI 0 BRACKET AISI AISI 0 SLIDE A Gr.CFM(MoMin.%) A Gr.WCB STEM AISI AISI 0 0 TOP COVER SEAL PTFE PTFE TOP COVER STUD AISI AISI 0 TOP COVER NUT AISI AISI 0 TOP COVER A Gr.CFM(MoMin.%) A Gr.WCB PACKING PTFE PTFE GLAND BOLT AISI AISI 0 GLAND AISI AISI 0 BONNET NUT AISI AISI 0 BONNET STUD AISI AISI 0 BONNET A Gr.CFM(MoMin.%) A Gr.WCB 0 BRACKET AISI AISI 0 BRACKET STUD AISI AISI 0 BRACKET NUT AISI AISI 0 YOKE SLEEVE BRONZE BRONZE HANDLE STEEL STEEL S.S. Stainless Steel(MoMin.%) Page PCD=ØJ M-N A A - A C.S. Cast Steel(GS-C) L A T DIMENSIONS " -/" " " " " " 0" " Size DN0~DN00( ~ ) Pressure class DIN PN0 / / / 0 JIS 0K / K / 0K / 0K ANSI 0LBS Figure 0 Unit:mm SIZE øg øj L øm N T PN 0.0.0.0 M.0 PN.0.0.0 M.0 PN.0.0.0 M.0 PN 0.0.0.0 M.0 PN 0.0.0.0 M.0 PN.0.0.0 M.0 PN.0.0.0 M.0 PN 0.0.0.0 M.0 PN 0 00.0 0.0.0 M.0 PN 00.0 0.0.0 M.0 PN 00.0 0.0.0 M.0 PN 0 00.0 0.0.0 M.0 PN 0 0.0 0.0.0 M 0.0 PN 0.0 0.0.0 M 0.0 PN.0 0.0.0 M0 0.0 PN 0.0 0.0.0 M0 0.0 PN 0 0.0 0.0.0 M.0 PN 0.0 0.0.0 M.0 PN 0.0 0.0.0 M.0 PN 0 0.0 0.0.0 M.0 PN 0.0 0.0.0 M0.0 PN.0 0.0.0 M0.0 PN 00.0 0.0.0 M.0 PN 0 00.0 0.0.0 M.0 PN 0 0.0.0.0 M0.0 PN 0.0.0.0 M0.0 PN 0.0 0.0.0 M.0 PN 0.0 0.0.0 M.0 PN 0.0 0.0 00.0 M0.0 PN 0.0.0 00.0 M.0 PN 0.0 0.0 00.0 M.0 PN 0 0.0.0 00.0 M0.0 PN 0.0 00.0 00.0 M0.0 PN 0.0 0.0 00.0 M.0 PN 0.0 0.0 00.0 M.0 PN 0.0 0.0 00.0 M0.0
Year : ØG M-N PCD=ØJ MATERIALS LIST NO. PART NAME TYPE S.S. TYPE C.S. BODY A Gr.CFM(MoMin.%) A Gr.WCB DISC A Gr.CFM(MoMin.%) AISI 0 DISC SEAL PTFE PTFE BOLT AISI AISI 0 BRACKET AISI AISI 0 SLIDE AISI AISI 0 STEM AISI AISI 0 TOP COVER SEAL PTFE PTFE TOP COVER BOLT AISI AISI 0 0 TOP COVER NUT AISI AISI 0 TOP COVER A Gr.CFM(MoMin.%) A Gr.WCB PACKING PTFE PTFE GLAND BOLT AISI AISI 0 GLAND AISI AISI 0 BONNET NUT AISI AISI 0 BONNET BOLT AISI AISI 0 BONNET A Gr.CFM(MoMin.%) A Gr.WCB BRACKET AISI AISI 0 BRACKTE BOLT AISI AISI 0 0 BRACKET NUT AISI AISI 0 YOKE SLEEVE BRONZE BRONZE HANDLE STEEL STEEL BOLT AISI AISI 0 BOTTOM PIN AISI AISI 0 BOTTOM SEAL PTFE PTFE PLUG AISI AISI 0 TRANSMITTAL BAR AISI AISI 0 SPRING BOX AISI AISI 0 SPRING AISI AISI 0 0 SPRING BOX COVER AISI AISI 0 NUT AISI AISI 0 STOP BAR AISI AISI 0 S.S. Stainless Steel(MoMin.%) Page 0 A - A 0 0 A C.S. Cast Steel(GS-C) L A T Size DN0~DN00( ~ ) Pressure class DIN PN0 / / / 0 JIS 0K / K / 0K / 0K ANSI 0LBS DIMENSIONS " -/" " " " " " 0" " Figure 0 Unit:mm SIZE øg øj L øm N T PN 0.0.0.0 M.0 PN.0.0.0 M.0 PN.0.0.0 M.0 PN 0.0.0.0 M.0 PN 0.0.0.0 M.0 PN.0.0.0 M.0 PN.0.0.0 M.0 PN 0.0.0.0 M.0 PN 0 00.0 0.0.0 M.0 PN 00.0 0.0.0 M.0 PN 00.0 0.0.0 M.0 PN 0 00.0 0.0.0 M.0 PN 0 0.0 0.0.0 M 0.0 PN 0.0 0.0.0 M 0.0 PN.0 0.0.0 M0 0.0 PN 0.0 0.0.0 M0 0.0 PN 0 0.0 0.0.0 M.0 PN 0.0 0.0.0 M.0 PN 0.0 0.0.0 M.0 PN 0 0.0 0.0.0 M.0 PN 0.0 0.0.0 M0.0 PN.0 0.0.0 M0.0 PN 00.0 0.0.0 M.0 PN 0 00.0 0.0.0 M.0 PN 0 0.0.0.0 M0.0 PN 0.0.0.0 M0.0 PN 0.0 0.0.0 M.0 PN 0.0 0.0.0 M.0 PN 0.0 0.0 00.0 M0.0 PN 0.0.0 00.0 M.0 PN.0 0.0 00.0 M.0 PN 0 0.0.0 00.0 M0.0 PN 0.0 00.0 00.0 M0.0 PN 0.0 0.0 00.0 M.0 PN.0 0.0 00.0 M.0 PN 0.0 0.0 00.0 M0.0
Year : L Size DN0~DN00( ~ ) Pressure class DIN PN0 / / / 0 JIS 0K / K / 0K / 0K ANSI 0LBS ØG Figure 0 DIMENSIONS PCD ØJ ØM-N Deep=T Unit:mm SIZE øg øj L øm N T JIS 0K.0 0.0.0 M.0 " JIS K.0 0.0.0 M.0 JIS 0K.0 0.0.0 M.0 JIS 0K.0 0.0.0 M.0 -/" JIS K.0 0.0.0 M.0 JIS 0K.0 0.0.0 M.0 JIS 0K.0 0.0.0 M.0 " JIS K 00.0 0.0.0 M0.0 JIS 0K 00.0 0.0.0 M0.0 JIS 0K 0.0.0.0 M.0 " JIS K.0.0.0 M0 0.0 JIS 0K.0.0.0 M0 0.0 JIS 0K 0.0 0.0.0 M0 0.0 " JIS K 0.0.0.0 M 0.0 JIS 0K 0.0.0.0 M 0.0 JIS 0K 0.0 0.0.0 M0 0.0 " JIS K 0.0 0.0.0 M 0.0 JIS 0K 0.0 0.0.0 M 0.0 JIS 0K 0.0 0.0.0 M0.0 " JIS K 0.0 0.0.0 M.0 JIS 0K 0.0 0.0.0 M.0 JIS 0K 00.0.0 00.0 M.0 0" JIS K 0.0 0.0 00.0 M.0 JIS 0K 0.0 0.0 00.0 M.0 JIS 0K.0 00.0 00.0 M.0 " JIS K 0.0 0.0 00.0 M.0 JIS 0K 0.0 0.0 00.0 M.0 DIMENSIONS Unit:mm SIZE øg øj L øm N T PN 0.0.0.0 M.0 " PN.0.0.0 M.0 PN.0.0.0 M.0 PN 0.0.0.0 M.0 PN 0.0.0.0 M.0 -/" PN.0.0.0 M.0 PN.0.0.0 M.0 PN 0.0.0.0 M.0 PN 0 00.0 0.0.0 M.0 " PN 00.0 0.0.0 M.0 PN 00.0 0.0.0 M.0 PN 0 00.0 0.0.0 M.0 PN 0 0.0 0.0.0 M 0.0 " PN 0.0 0.0.0 M 0.0 PN.0 0.0.0 M0 0.0 PN 0.0 0.0.0 M0 0.0 PN 0 0.0 0.0.0 M.0 " PN 0.0 0.0.0 M.0 PN 0.0 0.0.0 M.0 PN 0 0.0 0.0.0 M.0 PN 0.0 0.0.0 M0.0 " PN.0 0.0.0 M0.0 PN 00.0 0.0.0 M.0 PN 0 00.0 0.0.0 M.0 PN 0 0.0.0.0 M0.0 " PN 0.0.0.0 M0.0 PN 0.0 0.0.0 M.0 PN 0.0 0.0.0 M.0 PN 0.0 0.0 00.0 M0.0 0" PN 0.0.0 00.0 M.0 PN 0.0 0.0 00.0 M.0 PN 0 0.0.0 00.0 M0.0 PN 0.0 00.0 00.0 M0.0 " PN 0.0 0.0 00.0 M.0 PN 0.0 0.0 00.0 M.0 PN 0.0 0.0 00.0 M0.0 Page 0
Year : A Quality Brand Industries..... Marine Chemical Petrochemical Oil / Gas Offshore Fluids. Fluid. Oil. Chemical. Gas. Steam. Water Page