Application Guidelines Regarding World Taekwondo(WT) Logo, Manufacturer Identification(), Homologation Mark(CE) and Technical Requirements as of April 23, 2018
KYORUGI CLOTHING Front * Manufacturer s Identification Back National Flag NOC Code Belt must be 10cm or higher above the line of knee
PSS / Non-PSS * Manufacturer s Identification Front Head Back Trunk Sensing Socks Manufacturer s Identification PERSONAL EQUIPMENT * Manufacturer s Identification Forearm Guard Shin Guard Groin Guard Hand
APPLICATION OF GUIDELINES REGARDING AUTHORISED IDENTIFICATIONS WORLD TAEKWONDO LOGO (ONE PER ITEM) CLOTHING Kyorugi Jacket Kyorugi Pants Poomsae Jacket Poomsae Pants in front of the upper garment where the black neck bands are met/reddish gold kicking man (color code: Pantone Metallic 876C) with white horizontal signature by embroidery (on black background color of the patch) * Belt is considered to belong to Kyorugi uniform in World Taekwondo s recognition of Kyorugi uniform. in the left chest of the jacket front (* WTF Recognition emblem is not used any longer.) * Cadet / Junior / Senior: original WT logo with horizontal signature * Masters: WT logo with horizontal signature in all black * Belt is considered to belong to Poomsae uniform in World Taekwondo s recognition of Poomsae uniform. 28 cm 2 28 cm 2 PSS / Non-PSS Head / (Mask Head ) Trunk Sensing Socks at the point 2 to 3cm above the bottom center and left side of the back head/ kicking man with horizontal signature in white solid color on red or blue head protector at the bottom center of the front part of the trunk protector, 3cm above the size indicator/ kicking man with horizontal signature in white solid color on red or blue trunk protector at the point 1.5cm below the top center of the lower edge of the ankle fastener/ kicking man with horizontal signature in black solid color on white background color of the fastener or in white solid color on black background color of the fastener 6 cm 2 14 cm 2 6 cm 2 PERSONAL EQUIPMENT Forearm / Shin Guards Groin Guards Hand at the 2 to 3cm above the manufacturer s identification (or top front or bottom front of the guard)/ Kicking man with horizontal signature in black solid color (on white background color of the product) at the location available except the location for manufacturer s identification/ Kicking man with horizontal signature in black solid color (on white background color of the product) at the center of the outer side of wrist fastener/ Kicking man with horizontal signature in black solid color on white background color of the fastener or white solid color on black background color of the fastener 10 cm 2 10 cm 2 6 cm 2
APPLICATION OF GUIDELINES REGARDING AUTHORISED IDENTIFICATIONS MANUFACTURER S IDENTIFICATION (ONE PER ITEM) HOMOLOGATION MARK (CE) CLOTHING LOCATION SIZE LOCATION SIZE Kyorugi Jacket 3 to 3.5cm below the shoulder line of the left arm 30cm 2 Kyorugi Pants above the knee, center of the right leg 30cm 2 Kyorugi Belt at one end of the belt 6cm 2 Poomsae Jacket at the right chest of the jacket front 30cm 2 Poomsae Pants at the knee of the right leg 30cm 2 Poomsae Belt at one end of the belt 6cm 2 PSS / Non-PSS Head / (Mask Head ) at the center of the forehead 8cm 2 at the left side of the center of the back head, 1 to 2cm below the WT logo, white in color 4cm 2 Trunk at the top center of the front 30cm 2 4cm 2 Sensing Socks PERSONAL EQUIPMENT at the center of the front center, 5cm below the WT logo 6cm 2 1 Forearm Guards Shin Guards Groin Guards Hand s at the center of the front 10cm 2 at the center of the front 14cm 2 at the center of the front 10cm 2 at the center of the outer part of the protectors 8cm 2 1
WORLD TAEKWONDO SPECIFIC TECHNICAL REQUIREMENTS LOCATIONS TAKEN FOR OTHER PURPOSES IN KYORUGI COMPETITION UNIFORM National Flag 3 to 3.5cm below from the shoulder line of the right arm 10cm x 7cm NOC Code the NOC code must be printed in black on the Kyorugi Jacket, using bold Verdana font, and located 5cm or higher from the lower edge of the Kyorugi jacket. 30cm x 12cm LOCATIONS USED FOR OTHER PURPOSES IN POOMSAE COMPETITION UNIFORM National Flag at the center 3.5cm below the shoulder line of the right arm 10cm x 7cm NOC Code at the center 12cm from the top line below the collar in the back of the Poomsae jacket 30cm x 12cm MANUFACTURER S IDENTIFICATION (ONE PER ITEM) Name, designation trademark, logo or any distinctive sign of the manufacturer (Only one per item is allowed) BIB NUMBER (if applicable) Jacket upper left arm Pants upper right leg (thigh) - at the point 2 to 3cm above the manufacturer s identification * Bib no. size is not fixed. *One additional identification, strictly limited to Product Technology Identification, shall be permitted per clothing item and shall not exceed 10 cm 2. *No identification of the Manufacturer may appear on the collar or on the neck.