A-Frames & Tool Bar Spacers

Similar documents
Coulter Assemblies & Guide Wheels

Installation Guide RHT-380. This Manual Must Be Read Before Operating The Equipment CUSTOMER COPY

Divider Systems. Rear Tire Divider (RTD) Section 4. Model Years Model Years Model Years

Parts Manual. Scraper Hitches PH:

Stop the Pivot Monster in It s Tracks

INSTALLATION INSTRUCTIONS FOR ROLLOVER PROTECTION SYSTEM (ROPS)

Important Note: Tighten lock nuts so the support tubes still swing freely see figure 2. There must be 1 2 threads of bolt past end of lock nuts.

VERSA BIKE RACK INSTRUCTIONS

Manufacturing, Inc. Manual. Series I UT3030, UT5036, UT5042 & UT5052 (S/N KA1096A-) Rolling Spike Update Ultra-Till (Disc & Coulter)

Assembly Instructions for the Rolling Harrow and Board Turbo-Till 6/26/03

Mfg. No: Grass Catcher, Single Bag (Export)

Product Catalogue. Version 8.0. GSection. Hendrickson Suspension

Livestock Equipment Bale Movers/ Bale Spears. Tractor Linkage. Grade 5 & 8 Hitch Pins. Tractor Linkage

Assembly Instructions for the Rolling Harrow and Reel Turbo-Till 6/26/03

Invacare Top End Parts Catalog

Replaces Lesco 300 & 500 Parts

Operator s/parts Manual

ATV BLADE HARDWARE. For POLARIS ATVs OWNER S MANUAL MODEL NUMBER: CUSTOMER MUST RECEIVE A COPY OF THIS OWNERS MANUAL AT TIME OF SALE

BRONZE BUSHING REPLACEMENT PROCEDURE DN345 & NL450C

GENUINE PARTS INSTALLATION INSTRUCTIONS

HoldUp Plus2. Safety Kit included: See additional instructions for installation. REAR WHEEL TRAY. BASE (1x) lock WASHER (1x) KEY (2x) SAFETY CLIP (1x)

Marine 6-Boat Free-Standing Racks SKU: Updated November 2011

Replaces Lesco 300 & 500 Parts Cutting Unit

Wellhead Mast. Installation and Operation Guide. Nanometrics Inc. Kanata, Ontario Canada

LITERIDER 2&3 IMPORTANT WARNING. 2Bike (1x) Bolt (1x) Nut (1x) Small Hex Wrench (1x)

HP10168 & HP10169 KITS HP10152 / HP10154 / HP10156

TSX1600L Rite-Lock Power Arm Kit, left Stowing W/One Top Mount Pivot W/20" Base & 27" Upper

Bike Rack and Spare Tire Carrier 1-1/4" Receiver

INSTALLATION INSTRUCTIONS

TOYOTA TACOMA 2005 TOW HITCH Preparation. Part Number: PT

Import Bike Rack OEM INSTALLATION MANUAL

SERIES 2 RAMP OWNER S MANUAL TOOLS REQUIRED: BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup.

Reproduction. Not for. Parts Manual. VCS404 16" Walk Behind Mower. Models

Parts & Installation Instructions SV & SV 2 8.5, 9.5 & 10.5 and SVLD 7.5 Snow Plow

PARTS LIST REPLACEMENT PARTS COMPOSILITE SC STEERABLE SUSPENSION SYSTEMS

#59114 Rola 2-Bike Rack Carrier (Shown Assembled) (A) (C) (B)

Invacare Top End Parts Catalog

1650EXLT, ,

W A L D M A N U F A C T U R I N G C O M P A N Y, I N C.

ATV BLADE HARDWARE. For POLARIS ATVs OWNER S MANUAL MODEL NUMBER: CUSTOMER MUST RECEIVE A COPY OF THIS OWNERS MANUAL AT TIME OF SALE

SIF Exploded Views 10/3/2016

SETTING UP THE MODEL 210B SRA

General Information. Installation Instructions. CP1000 & FCP1000 Folding Markers. Used with: CP1000 FCP1000

5. STRUCTURAL ANALYSIS

Rev J Terminator Parts Book Page 1 of 15 Top End

INSTALLATION INSTRUCTIONS FOR: RE4548 JK FRONT COILOVER KIT

2012-June-12 SECOND DRAFT Hobie Getaway Spinnaker Installation Instructions

Anchor Component Material Standard Mechanical Properties

TURF VENTILATOR ATTACHMENT ASSEMBLY KIT INSTRUCTION BOOKLET

INSTALLATION INSTRUCTIONS

TR-AUGER. Section C INDEX BOOT / HOPPER

RS Important Notes. Contact. Bicycle Maintenance Stand instructions manual. Warranty Period : 1 year (from the date of your purchase)

Channel Bracket Support Cable Bracket Bearer Locking Pin Foundation Bolt Iron Anchor Step Manhole Sump Grill PVC/Steel Ladder Ladder Support & Hook

Assembly Instructions. -Cantilever Boat Lifts

Hardened Steel Washers

MAGNETIC INDOOR CYCLING BIKE

Detroit Speed, Inc. A-body Rear Coilover Conversion Kit A-body (Moser Rear Axle) P/N: , , , , ,

SpeciÞcations. Engine Dimensions Dimensions in millimeters. Inch equivalents shown in [].

Rev S Terminator Parts Book Page 1 of 14 Top E nd

SHEET 2: VERTICAL INSTALLATION

Reliance Industries, LLC Operating instructions for the / Bolt-on D-Ring Anchorage. Model # 3071

SPINNER RIDE GETTING STARTED GUIDE. Welcome to a personalized fitness experience for your members

INSTALLATION INSTRUCTIONS

SCOUT DECK ANCHOR 3 1/4" BONDING SCREW

Top End Wheelchair Service Part List: FORCE G

RZR 900 Hitch Mount Plate

INSTALLATION INSTRUCTIONS

GEN20AD-GEN20AL-GEN18AN

Models: KD1200 KD1500 Tip Tow II Tip Tow 10 Tip Tow 3000 Kaydee Kaddy. Parts Manual. Hydraulic Lifts MANUAL NO REV.

Fairlane & Meteor Instruction Package RC-114K. Rear Coilover Suspension Kit NOTE...

Technical Service Parts Breakdown

Fontaine Fifth Wheel Ultra LT Rebuild Procedures

SKI SPECIFICATIONS INSTALLATION, MAINTENANCE, SERVICE INSTRUCTIONS & ILLUSTRATED PARTS LIST

INSTALLATION INSTRUCTIONS

8MAY15 US RACK, Inc Falcon Drive, Madera, CA

Detroit Speed, Inc. Rear Coilover Conversion Kit Camaro/Firebird P/N: &

U.S. Patent No. 7,922,246. Patents Pending

Attention. Chainguards. Cranks and Chains. Flywheel Sprocket

SKI SPECIFICATIONS INSTALLATION, MAINTENANCE, SERVICE INSTRUCTIONS & ILLUSTRATED PARTS LIST

a division of Enviro Safety Products

ASSEMBLY INSTRUCTIONS FOR THE SHOOTOUT HOOPS GAME

Parts Manual HEAVY DUTY RIGHT HAND ARM

2.4M Viking Swing Basket Swing

Side-of-Pole Mount for 1 Module (SPM1) For Module Types A & B

Bike Rack and Tire Carrier

To address this issue, Ariens Company has developed two cradle plates kits:

A. TO PREPARE THE MACHINE FOR USE.

THOR 10 HAMMER CAGE INSTRUCTIONS

Post Hole Digger AP-SA PK Parts Manual. Copyright 2018 Printed 07/11/18

600 / 600FC OWNER'S MANUAL

KEY PART KEY PART NO. NO. DESCRIPTION NO. NO. DESCRIPTION

MID-CUT AND FRONT CUT UNITS

09/17/2007 Copy VISIT THE LIFETIME WEB SITE:

Gurney Flap for WRX and STI w/low Profile Trunk Spoiler

Spare Parts Catalogue. Version: 2018/05/28d EN

Post Hole Digger SA P Parts Manual. Copyright 2018 Printed 01/29/18

FFP bow mount anchor nests

Actuator Material. Style BCP. Bat BCP BCP BCP BCP BCP BCP BCP BCP BCP. Bat Bat Bat Bat Bat Bat Bat Bat Bat. Actuator Style

Trilogy Theory of Operation

DH-9downhill nine. TECHNICAL guide. Table of Contents. Assembly Instructions. Exploded Views

Transcription:

Section 200-60 A-Frames & Tool Bar Spacers 3 PIECE A-FRAMES 1 PIECE A-FRAMES QUICK HITCHES ** TOOL BAR SPACERS LIFT BRACKETS 3-Point Tools 200-601

AH3-44 CATEGORY II & III A-FRAME TABLE Vert. (A) Horiz.(B) (A) BAR SIZE (B) COMPLETE HITCH PART CENTER MAST COMPLETE W/BOLTS CENTER MAST BODY ONLY LIFT BRACKET COMPLETE W/ BOLTS & PINS LIFT BRACKET BODY ONLY 4 4 AH3-44 AH3-4C Z-AH3-4C AH3-4B Z-AH3-4B 4 6 AH3-46 AH3-46C Z-AH3-4C AH3-46B Z-AH3-6B 5 7 AH3-57 AH3-5C Z-AH3-4C AH3-57B Z-AH3-7B 6 6 AH3-66 AH3-6C Z-AH3-4C AH3-6B Z-AH3-6B 6 8 AH3-68 AH3-68C Z-AH3-4C AH3-68B Z-AH3-8B 7 5 AH3-75 AH3-75C Z-AH3-4C AH3-5B Z-AH3-5B 7 7 AH3-77 AH3-7C Z-AH3-4C AH3-7B AH3-7B 7 7 Special Cultivator Hitch with AH3-77CUL* AH3-7CH Z-AH3-7CUL AH3-7B Z-AH3-7B 3-Point Tools 200-602 *AH3-77CUL is designed specifically for the Norwest Spider Cultivator. Not available for other applications.

THREE PIECE HEAVY DUTY A-FRAMES FOR TOOL BARS 3 Piece A-Frames made by Norwest are some of the best aftermarket frames made. They are Quick Hitch Ready for Category 2 & 3. 3 Piece A-Frames include Center Mast, Lift Brackets, and Lift Pins ready to attach to Bar. Top Link Pins Not Included. ** The first number after the dash in part number is the Vertical Measurement. The second number is the Horizontal Measurement. Example: AH3-46 = AH3-4(V)6(H) CATEGORY II & III A-FRAME TABLE Mounting Hardware U-BOLTS USED HEX BOLTS USED NUT LOCK WASHER STRAP LIFT PIN LYNCH PIN BUSHING CENTER MAST LIFT BRACKET CENTER MAST LIFT BRACKET FUB4060-78 FUB4060-78 n/a n/a n/a 21293 21938 21197 n/a n/a FHB78900G5 FHB78700G5 40S 21293 21938 21197 n/a 16-00204 FHB781000G5 n/a 50S 21293 21938 21197 n/a n/a FHB78900G5 FHB78900G5 60S 21293 21938 21197 n/a n/a FHB78900G5 FHB78900G5 60S 21293 21938 21197 16-00204 n/a n/a FHB781000G5 50S 21293 21938 21197 16-03204 16-03204 n/a n/a n/a 21293 21938 21197 n/a 16-03204 FHB781000G5 n/a n/a 21293 21938 21197 *AH3-7CH is designed specifically for the Norwest Spider Cultivator. Not available for other applications. 3-Point Tools 200-603

ONE PIECE A-FRAMES FOR 2-1/4 DIAMOND BARS All A-Frames come ready to attach to tool bar with lift pins. Top Link Pins Not Included. LIGHT DUTY CATEGORY I A-FRAMES PART CATEGORY PIN DIAMETER Lift Pin Meas. (A) (Center to Center) WEIGHT (LBS.) TOOL BAR STRAP AL-1D I - Light Duty 7/8 26 55 342S AL-1D STANDARD & HEAVY DUTY CATEGORY I A-FRAMES AS-1D & AH-1D PART CATEGORY PIN DIAMETER PART Lift Pin Meas. (A) (Center to Center) WEIGHT (LBS.) TOOL BAR STRAP AS-1D I - Standard Duty 7/8 21226 31-5/8 68 342S AH-1D I - Heavy Duty 7/8 21226 31-5/8 110 342S AH-1BD AH-1BD I - Heavy Duty w/brace 7/8 21226 31-5/8 133 706 PART STANDARD & HEAVY DUTY CATEGORY II A-FRAMES CATEGORY PIN DIAMETER PART Lift Pin Meas. (A) (Center to Center) WEIGHT (LBS.) TOOL BAR CAP AS-2D II - Standard Duty 1-1/8 21242 37 86 706 AS-2BD AS-QH2D AH-UH2D II - Standard Duty w/brace II - Will Fit Quick Hitches II - Extra Heavy Duty Under Slung 1-1/8 21242 37-1/8 129 706 1-1/8 21242 37 107 706 1-1/8 21242 36-1/4 112 710 AS-2BD AS-2D AH-UH2D AS-QH2D A 3-Point Tools 200-604

AS3-1D THREE PIECE A-FRAMES FOR 2-1/4 DIAMOND BARS 3 Piece A-Frames include Center Mast, Lift Brackets, and Lift Pins ready to attach to Bar. Top Link Pins Not Included. CATEGORY I & II A-FRAMES COMPLETE HITCH PART CATEGORY PIN DIAMETER LIFT PIN PART CENTER MAST PART BAR STRAP LIFT BRACKET PART BAR STRAP AS3-1D CAT I 7/8 21226 AS3-1DC 342S AS3B-1D 342S AS3-2D CAT II 1-1/8 21242 AS3-2DC 130S AS3B-2D 130S ALL 3PIECE A-FRAMES FOR TOOL BARS COME WITH BUSHINGS. A-FRAMES ARE CATEGORIZED BY THE BUSHING AS FOLLOWS: CATEGORY II - WITHOUT BUSHING CATEGORY III - WITH BUSHING 3-Point Tools 200-605

SpeeCo Quick Hitches are a popular device that make the attachment and release of 3-point implements fast and easy. Available in Category I,II, and III. AQH-2S PART CATEGORY I, II & III QUICK HITCHES CATEGORY PIN DIAMETER Meas. (A) (Center to Center) MAX RECOMMENDED HP WEIGHT (LBS.). AQH-1S I - Standard Duty 7/8 27-1/4 50 76 AQH-2S II - Standard Duty 1-1/8 32 100 134 AQH-2H II - Heavy Duty 1-1/8 32 150 160 AQH-23S II & III - Standard Duty 1-7/16 38 225 196 AQH-3S III - Standard Duty 1-7/16 38 225 182 AQH-3N III - Narrow Heavy Duty 1-7/16 32 225 176 TRACTOR POWER TOP LINK PIN DIAMETER LIFT ARM PIN DIAMETER TRACTOR CATEGORIES HORSE POWER kw SAE METRIC SAE METRIC CAT 0 Category 0 Up to 20 <15 5/8 15.8 mm 5/8 15.8 mm CAT 1 Category 1 20-45 15-35 3/4 19 mm 7/8 22.4 mm CAT 2 Category 2 40-80 30-75 1 25.4 mm 1-1/8 28.7 mm CAT 3 Category 3 80-225 60-168 1-1/4 31.8 mm 1-7/16 37.4 mm CAT 4 Category 4 180-400 135-300 1-3/4 44.5 mm 2 50.8 mm STABILIZERS UPPER STAY STRAPS LIFT ARM A 3-Point Tools 200-606 LIFT ARM HITCH PIN DRAW BAR TOP LINKS LOWER STAY STRAPS

TOOL BAR SPACERS (SPREADER BARS) 2-1/4 to 2-1/4 COMPLETE PART PART (BODY ONLY) PART (STRAP ONLY) BOLTS NUTS MATERIAL CENTERS (MEAS. A) WEIGHT S-09 BS09 342S 9 20 LBS. S-12 BS12 342S 12 23 LBS. S-14 BS14 342S 14 25 LBS. S-16 BS16 342S 16 27 LBS. S-18 BS18 342S 18 28 LBS. S-20 BS20 342S 20 29 LBS. S-24 BS24 342S 24 34 LBS. S-09 S-12 S-14 S-16 S-18 S-20 S-24 A 3-Point Tools 200-607

TOOL BAR SPACERS (SPREADER BARS) 2-1/4 to FLAT TOOL BARS VERT. MEAS. HORIZ. MEAS. 2-1/4 BAR INFORMATION TOOL BAR INFORMATION COMPLETE PART PART 2-1/4 STRAP HEX BOLT NUT BAR SIZE S-2540 342S BOLT 4 4 4 6 S-2560 342S BOLT 6 6 6 8 S-2570 342S BOLT 7 5 7 7 Prices are based on 9-16 Tool Bar Spacers. Longer bar spacers will incur a higher price. Remember, When giving toolbar measurements, Norwest requests the Vertical Measurement first, followed by Horizontal Measurement. Please have measurements and other information ready prior to placing your order. Thank You, Norwest Management V E R T I C A L H O R I Z O N T A L 3-Point Tools 200-608

TOOL BAR SPACERS (SPREADER BARS) 2-1/4 to FLAT TOOL BARS TOOL BAR INFORMATION COMPLETE PART (Cont. from pg. 200-608) S-2540 S-2560 S-2570 U-BOLTS / HEX BOLTS NUT LOCK WASHER PART TOOL BAR STRAP FUB4060-78 U-BOLT n/a FHB78900G5 HEX BOLT 60S FHB78900G5 HEX BOLT 60S FHB78900G5 HEX BOLT 60S 16-00204 U-BOLT n/a 16-03204 n/a U-BOLT Other Custom Tool Bar Spacers Available. Please call Norwest for details. (208) 436-1770 3-Point Tools 200-609

3-Point Tools 200-610