MATERIAL SAFETY DATA SHEET

Similar documents
MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET. Product Name: Magic Warmer Product Code: MAG4057 Page 1 of 7

MATERIAL SAFETY DATA SHEET General Finishes Corporation. SECTION 2: Composition/Information on Ingredients

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Product No Cresyl Violet Acetate, Certified. Issue Date ( ) Review Date ( )

Version /28/2006

MATERIAL SAFETY DATA SHEET Penreco Parol Low Viscosity Mineral Oil Tech EMERGENCY OVERVIEW

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet MATERIAL SAFETY DATA SHEET AMMONIUM NITRATE. HiDAN. High Density Ammonium Nitrate

SAFETY DATA SHEET FOR FALK GMAX 6000

Gulf Compressor Synthetic DE Lubricant

3. COMPOSITION / INFORMATION ON INGREDIENTS

SAFETY DATA SHEET (SDS) Stick-It! Rear View Mirror Adhesive

Air Tool Lubricant MSDS. Air Tool Lubricant. (800) (Poison Control USA) 24 Hours (800) (CHEMTREC) 24 Hours. Not Applicable - Mixture

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET S415L VER 15-1 DATE: 8/17/15 SW

Safety Data Sheet. Tuxton Synthetic Gear Oil 75W90

GLENIUM 3000 (FORMERLY: RHEOBUILD 3000FC; PS1140 ADMIXTURE)

Version /28/2006

Product Name:Heat Sink Compound 1801 Morgan Street MSDS Number:148

SAFETY DATA SHEET Lead Stop

LIQUID ICE CORPORATION

MATERIAL SAFETY DATA SHEET. COPPER CARE PRODUCT NAME: Aqua-Nap-5. ATTENTION: SAFETY MANAGER MSDS Number: Date of Last Revision: 04/10/2006

MATERIAL SAFETY DATA SHEET Date Revised: 7/18/2013 Page: 1 Mold Release MSDS Number: SECTION 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Safety Data Sheet. AB Page 1 of 6 January 01, Relevant routes of exposure: Eye contact, skin contact, inhalation, ingestion

MATERIAL SAFETY DATA SHEET

AIRPORT ROAD EAST STROUDSBURG, PA HEALTH = 2 FLAMMABILITY = 1 REACTIVITY =

Safety Data Sheet. Tuxton Trust Dexron VI

SAFETY DATA SHEET Isopropyl Alcohol 70% Product Number: 32

Safety Data Sheet. Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET

GulfTEC Synthetic Motor Oil 0W-20

Material Safety Data Sheet

Material Safety Data Sheet Product No PELCO CryO-Z-T Issue Date ( ) Review Date ( )

MATERIAL SAFETY DATA SHEET MSDS DATE: 7/08/09 SCENT WINTERGREEN SUPERSEDES: 6/23/08

CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

SILICONES UNLIMITED, INC. MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET. Page 1 of 9. Product Code: 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION. Product Name: 76 Turbine Oil 68

MATERIAL SAFETY DATA SHEET C-MUL SUN DRILLING PRODUCTS CORP.

Version /08/2003

UT91 Version 2. Print Date 05/13/2010 REVISION DATE: 04/14/2010

Safety Data Sheet. Eye: Exposure to airborne concentrations above statutory or recommended exposure limits may cause irritation of the eyes

The Valvoline Company Date Prepared: 01/14/02. MSDS No: I

MATERIAL SAFETY DATA SHEET MSDS DATE: 9/3/ Surfactant SUPERSEDES: None

SAFETY DATA SHEET. 1. Product and company identification. 2. Hazards identification. Page 1 of 5 Pot & Pan Detergent. Product Name POT & PAN DETERGENT

Safety Data Sheet. Section 1: Identification. Section 2: Hazard(s) Identification

MATERIAL SAFETY DATA SHEET WhirlAway Whirlpool Bath System Cleaner & Deodorizer SECTION 1 PRODUCT NAME AND COMPANY IDENTIFICATION

Material Safety Data Sheet Magnesium stearate

The Valvoline Company Date Prepared: 01/14/02. MSDS No: I

MATERIAL SAFETY DATA SHEET Artisan Intensive Stone Cleaner SECTION 1 PRODUCT NAME AND COMPANY IDENTIFICATION

Safety Data Sheet. 503 Main Street Belle Chasse, LA 70037

ALPHAGUARD M-PRIME - 1 GALLON Version 1. Print Date 04/18/2012 REVISION DATE: 10/05/2011

Version /20/2006

Safety Data Sheet. Tuxton Select Full Synthetic 0W20 API SN/GF-5

Material Safety Data Sheet

Material Safety Data Sheet Brij 35, 30% w/v. Section 1 - Chemical Product and Company Identification

SAFETY DATA SHEET SR-48

MATERIAL SAFETY DATA SHEET "W" TEST SOLUTION NFPA HAZARD RATINGS* 2 Moderate health hazard 3 Highly flammable SECTION 1: PRODUCT INFORMATION

EMERGENCY PHONE: or (651) (24 hours)

MATERIAL SAFETY DATA SHEET

BOSS LUBRICANTS: MATERIAL SAFETY DATA SHEET

Safety Data Sheet. Section 1: Identification. Section 2: Hazard(s) Identification

Material Safety Data Sheet

Safety Data Sheet. BOSS 139 Hi-Temp Mortar. Section 1. Identification. Section 2. Hazards Identification. Synonyms Manufacturer Stock Numbers

Safety Data Sheet. AK Page 1 of 6 January 01, Appearance/Odor: Thick, viscous, white to off-white liquid with a mild ammonia odor

Material Safety Data Sheet SeaKlear: Phosphate Remover

Material Safety Data Sheet

MATERIAL SAFTEY DATA SHEET

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet SeaKlear: Free & Klear

Ingredient CAS Number Weight % ACGIH TLV PEL STEL Sodium Carbonate mg/m3 15 mg/m3

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET CHEMORSE, LTD

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

Safety Data Sheet. Address GHS Precautions If skin irritation occurs: Get medical advice/attention

Recommended use of the chemical and restrictions on use: Road stabilization and dust control.

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Cen-Pe-Co Hy-Torque Gear Lube Red With Temp Tac Page 1 of 5 05/01/08 MATERIAL SAFETY DATA SHEET

: EUCON DUSTROL - BULK GALLONS

Material Safety Data Sheet

24-HOUR EMERGENCY PHONE: CHEMTREC

Ingredient CAS Number Weight % ACGIH TLV PEL STEL Calcium Hypochlorite % Not Established Not Established

Safety Data Sheet SUREPREP NO-STING SKIN PROTECTANT

MATERIAL SAFETY DATA SHEET

Label Elements. Chemical Name CAS Concentration Synthetic PAG Base Oil Proprietary 75-90% Non-hazardous materials Proprietary <30%

Material Safety Data Sheet

Material Safety Data Sheet (ATTAR-C)

SAFETY DATA SHEET. Emergency Telephone Call Bio-Pure Products, Inc. Toll Free: (+1)

Southern Lithoplate, Inc. P.O. Box 9400 Wake Forest, NC Phone: Fax: Website:

Version /30/2006

Material Safety Data Sheet

Material Safety Data Sheet. Product Name: SoftCIDE -NA Foam Revision Date: 03/27/08 Version: 1

MATERIAL SAFETY DATA SHEET! GENERAL HYDROPONICS RARE EARTH 3/12/09!

MATERIAL SAFTEY DATA SHEET

Rust Check Corporation Rust Inhibitor MATERIAL SAFETY DATA SHEET

Transcription:

MATERIAL SAFETY DATA SHEET Product Name: CDI-Urea; 70% Liquor- Formaldehyde Free Page 1 of 6 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Name: CDI-Urea; 70% Liquor- Formaldehyde Free Generic Name: Urea, Aqueous Organic Amide Solution Chemical Family: Organic Salt Solution Chemical Formula: CO (NH 2 ) 2 Responsible Party: Cervantes~Delgado, Inc. P.O. Box 9083 Brea, California 92822 For further information contact MSDS Coordinator 8:30am -4:30pm Pacific Time, Mon- Fri: 714-990-3940 EMERGENCY OVERVIEW 24-Hour Emergency Telephone Numbers: For Chemical Emergencies: For Health Emergencies: Spill, Leak, Fire or Accident California Poison Call CHEMTREC Control System North America: (800) 424-9300 Cont. US: (800) 356-3129 Others: (703) 527-3887 (collect) Outside US: (415) 821-5338 Health Hazards: Product >140 F (>60 C). Can cause injury that requires prompt attention. Physical Hazards: Product is HOT, >140 F (>60 C). Physical Form: Liquid Appearance: Colorless, clear Odor: None to slight ammonia NFPA HAZARD CLASS: Health: Flammability: Reactivity: 2 (Least), can cause injury. Liquid >140 F 0 (Least), will not burn. 0 (Least), normally stable. Not reactive with water.

Product Name: Urea; 70% Liquor Page 2 of 7 2. COMPOSITION/INFORMATION ON INGREDIENTS No hazardous components identified per 29 CFR 1910.1200. OTHER COMPONENTS % Weight EXPOSURE GUIDELINE Limits Agency Type Urea 70 Not Established CAS# 57-13-6 Water 30 Not Established CAS# 7732-18-5 OTHER COMPONENTS % Weight EXPOSURE GUIDELINE Limits Agency Type Ammonia <0.5 50PPM OSHA PEL CAS# 7664-41-7 35PPM ACGIH STEL 300PPM NIOSH IDLH 25PPM ACGIH TLV Note: State, local or other agencies or advisory groups may have established more stringent limits. Consult an industrial hygienist or similar professional, or your local agencies, for further information. 3. HAZARDS IDENTIFICATION POTENTIAL HEALTH EFFECTS: Eye: Urea dust or solution may cause eye irritation. High temperature of liquid product will cause thermal tissue damage. Skin: Contact with dust or solution may cause skin irritation including redness and burning. High temperature of liquid product will cause thermal tissue damage. Inhalation (Breathing): Excessive inhalation of dried urea dust or atomized solution may cause sore throat, coughing and irritation of mucous membranes and the respiratory tract. Ingestion: Urea dust or solution may cause abdominal pain, nausea, vomiting and gastrointestinal irritation. (Urea is a protein to ruminants, animals with enzyme urease in their digestive systems, but is toxic to humans.) High temperature of liquid product will cause thermal tissue damage. Signs and Symptoms: Effects of overexposure may include irritation of the nose, throat and digestive tract, headaches, coughing, nausea, vomiting, and transient disorientation. Cancer: Inadequate evidence available to evaluate the cancer hazard of this material. Target Organs: No data available. Developmental: Inadequate evidence available for this material. Pre-Existing Medical Conditions: None known.

Product Name: Urea; 70% Liquor Page 3 of 7 4. FIRST AID MEASURES Eye: If contact occurs, immediately flush with large amounts of water, including under the eyelids. Cool burned areas with ice. Contact a physician immediately, preferably an Ophthalmologist. Speed and thoroughness in rinsing eyes are important to avoid permanent injury. Skin: Stop thermal damage by immediately rinsing with water. Immediately remove contaminated clothing and shoes. Flush chemical from affected areas with large amounts of water. Cool burned tissue with ice. Get medical attention. Inhalation (Breathing): If respiratory develop, move victim away from source of exposure and into fresh air. Keep victim warm and at rest. If victim is not breathing, clear airway and immediately begin artificial respiration. If breathing difficulties develop, oxygen should be administered by qualified personnel. Seek immediate medical attention. Ingestion (Swallowing): Do not induce vomiting. If vomiting occurs, keep victims his head below hips to help prevent aspiration. Seek immediate medical attention. 5. FIRE FIGHTING MEASURES Flammable Properties: Urea liquor is not flammable. Flash Point: None to boiling OSHA Flammability Class: Not applicable LEL/UEL: No data Autoignition Temperature: No data Unusual Fire & Explosion Hazards: Aqueous solutions of urea will not burn or support combustion but will decompose into noxious, poisonous gas when exposed to high temperatures of a fire. Closed containers exposed to extreme heat can rupture due to pressure buildup. Extinguishing Media: Use extinguishing agent suitable for type of surrounding fire. Fire Fighting Instructions: For fires beyond the incipient stage, emergency responders in the immediate hazard area should wear bunker gear. When the potential chemical hazard is unknown, in enclosed or confined spaces, or when explicitly required by DOT, a selfcontained breathing apparatus should be worn. In addition, wear other appropriate protective equipment as conditions warrant (see Section 8). Isolate immediate hazard area and keep unauthorized personnel out. Stop spill/release if it can be done with minimal risk. Move undamaged containers from immediate hazard area if it can be done with minimal risk. Water spray may be useful in minimizing or dispersing vapors. Cool equipment exposed to fire with water, if it can be done with minimal risk.

Product Name: Urea; 70% Liquor Page 4 of 7 6. ACCIDENTAL RELEASE MEASURES Stop the source of the release if it can be done without risk. Immediately isolate the hazard area and restrict access to authorized personnel only. Wear appropriate protective equipment including respiratory protection as conditions warrant (see Section 8). To prevent spilled material from entering sewers, storm drains or natural watercourses, contain material with a dike or with appropriate absorbent materials such as sand, clay, soil or commercially available absorbent. Place reclaimed liquid and absorbent into recovery or salvage drums for disposal. Refer to Section 12 for appropriate disposal. 7. HANDLING AND STORAGE Handling: Do not enter confined spaces such as tanks or pits without following proper entry procedures such as ASTM D-4276 and 29CFR 1910.146. The use of appropriate respiratory protection is advised when concentrations exceed any established exposure limits (see Section 2 and 8). Wash thoroughly after handling. Do not wear contaminated clothing or shoes. Use good personal hygiene practice. Storage: Store away from incompatible materials (See Section 10: Reactivity) or sources of heat. Empty containers may contain residue and can be dangerous. Do not pressurize, cut weld, braze, solder, drill, grind or expose such containers to heat, flames, sparks, or other sources of ignition; them may evolve noxious fumes. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering Controls: If current ventilation practices are not adequate to minimize exposure, additional ventilation or exhaust systems may be required. Personal Protective Equipment (PPE): Respiratory: Urea dust is water-soluble and will dissolve with mucosal membrane contact (lungs). Use approved respiratory protective equipment for cleaning large spills or upon entry into large tanks, vessels, and other confined space areas or in any situations where airborne concentrations of dried amide may exceed occupational exposure limits (15 mg/m 3, dust). Skin: The product is a hot aqueous solution (>140 F, >60 C) and will cause tissue damage. Wear non-porous clothing: pants, long sleeves, footwear and insulated gloves as minimum recommended protection against thermal hazard.. Eye/Face: Wear chemical goggles and or face shield where contact with liquid may occur. The product is a hot aqueous solution (>140 F, >60 C) that will damage mucosal membrane (eyes). Other Protective Equipment: A source of clean water should be available in the work area for flushing eyes and skin.

Product Name: Urea; 70% Liquor Page 5 of 7 9. PHYSICAL AND CHEMICAL PROPERTIES Note: Unless otherwise stated, values are determined at 20 C (68 F) and 760 mm Hg (1 atm). Flash Point: None to boiling Flammable/Explosive Limits (%): Not Applicable Autoignition Temperature: Not Applicable Appearance: Colorless, Clear Physical State: Liquid Odor: Slight ammonia ph: 7.0-9.0 Vapor Pressure (mm Hg): Not Applicable Crystallization Point: 135 F (57 C) Solubility in Water: 100% Specific Gravity: 1.179 @ 140 F (60 C) Bulk Density: 9.82 lb/gal @ 140 F (60 C) 10. STABILITY AND REACTIVITY Chemical Stability: Stable unless heated to decomposition. Conditions to Avoid: Avoid contact with strong oxidizing agents such as chlorine (bleach), peroxides, chromates, nitric acid, perchlorates, concentrated oxygen or permanganates. Contact can generate heat, fires, explosions and release toxic fumes. Incompatible Materials: Incompatible Materials: Avoid contact with strong oxidizing agents such as chlorine (bleach), peroxides, chromates, nitric acid, perchlorates, concentrated oxygen or permanganates. Contact can generate heat, fires, explosions and release toxic fumes. Hazardous Decomposition Products: If involved in a fire, carbon dioxide and ammonia may be generated. Ammonia can further decompose to nitric oxides and nitrogen dioxide. Other decomposition products include cyanuric acid, biuret and/or nitrogen oxides (NOx) Hazardous Polymerization: will not occur. 11. TOXICOLOGICAL INFORMATION No definitive information available on carcinogenicity, mutagenicity, target organs or developmental toxicity.

Product Name: Urea; 70% Liquor Page 6 of 7 12. DISPOSAL CONSIDERATIONS This material, if discarded as produced, is not a RCRA "listed" or "characteristic" hazardous waste. Use resulting in chemical or physical change or contamination may subject it to regulation as a hazardous waste. Along with properly characterizing all waste materials consult state and local regulations regarding the proper disposal of this material. Disposal: If this product becomes a waste, it does not meet the criteria of a hazardous waste as defined under the Resource Conservation and Recovery Act (RCRA) 40 CFR 261, since it does not have the characteristics of Subpart C, nor is it listed under Subpart D. As a non-hazardous liquid waste, it should be solidified with stabilizing agents such as sand, fly ash, or clay absorbent, so that no free liquid remains before disposal to an industrial waste landfill. 13. TRANSPORT INFORMATION Hazard Class or Division: Not classified as hazardous 14. REGULATORY INFORMATION This material contains the following chemicals subject to the reporting requirements of SARA 313 and 40 CFR 372. --None-- Warning: This material contains the following chemicals, which are known to the State of California to cause cancer, birth defects or other reproductive harm, and are subject to the requirements of California Proposition 65 {CA Health & Safety Code Section 25249.5) --None Known This material has not been identified as a carcinogen by NTP, IARC, or OSHA. EPA (CERCLA) Reportable Quantity: --None-- 15. DOCUMENTARY INFORMATION Issue Date: 12/15/05 Previous Issue Date: 11/01/04

Product Name: Urea; 70% Liquor Page 7 of 7 16. DISCLAIMER OF EXPRESSED AND IMPLIED WARRANTIES The information in this document is believed to be correct as of the date issued. HOWEVER, NO WARRANTY OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY OTHER WARRANTY IS EXPRESSED OR IS TO BE IMPLIED REGARDING THE ACCURACY OR COMPLETENESS OF THIS INFORMATION, THE RESULTS TO BE OBTAINED FROM THE USE OF THIS INFORMATION OR THE PRODUCT, THE SAFETY OF THIS PRODUCT, OR THE HAZARDS RELATED TO ITS USE. This information and product are furnished on the condition that the person receiving them shall make his own determination as to the suitability of the product for his particular purpose and on the condition that he assume the risk of his use thereof.