Revision Date 22.05.15 Revision. SAFETY DATA SHEET BAL BOND SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1. Product identifier Product name BAL BOND 1.2. Relevant identified uses of the substance or mixture and uses advised against Identified uses Bonding agent, primer or admixture. 1.3. Details of the supplier of the safety data sheet Supplier Contact Person Building Adhesives Ltd Longton Road, Trentham, Stoke on Trent ST4 8JB 01782 591100 sdsreply@building-adhesives.com 1.4. Emergency telephone number 01782 591100 (7am-8pm) SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the substance or mixture Classification (EC 1272/2008) Physical and Chemical Hazards Human health Environment Classification (1999/45/EEC) The Full Text for all R-Phrases and Hazard Statements are Displayed in Section 16. 2.2. Label elements Label In Accordance With (EC) No. 1272/2008 No pictogram required. Precautionary Statements Supplemental label information 2.3. Other hazards No information. P102 P262 P280 P305+351+338 EUH208 Keep out of reach of children. Do not get in eyes, on skin, or on clothing. Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Contains 1,2-Benzisothiazol-3(2H)-one,2-Methylisothiazol-3(2H)-one. May produce an allergic reaction. SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.2. Mixtures Composition Comments No classified ingredients, or those having occupational exposure limits, present above the levels of disclosure. 1 / 5
SECTION 4: FIRST AID MEASURES 4.1. Description of first aid measures Inhalation Move the exposed person to fresh air at once. Rinse nose and mouth with water. Get medical attention if any discomfort continues. Ingestion NEVER MAKE AN UNCONSCIOUS PERSON VOMIT OR DRINK FLUIDS! Rinse mouth thoroughly. Get medical attention if any discomfort continues. Skin contact Remove affected person from source of contamination. Remove contaminated clothing. Wash the skin immediately with soap and water. Get medical attention if any discomfort continues. Eye contact Make sure to remove any contact lenses from the eyes before rinsing. Promptly wash eyes with plenty of water while lifting the eye lids. Continue to rinse for at least 15 minutes. Get medical attention if any discomfort continues. 4.2. Most important symptoms and effects, both acute and delayed General information No significant symptoms are expected due to the non-hazardous nature of the product. 4.3. Indication of any immediate medical attention and special treatment needed No specific first aid measures noted. SECTION 5: FIREFIGHTING MEASURES 5.1. Extinguishing media Extinguishing media These products are not flammable. Use fire-extinguishing media appropriate for surrounding materials. 5.2. Special hazards arising from the substance or mixture Hazardous combustion products None under normal conditions. Unusual Fire & Explosion Hazards No unusual fire or explosion hazards noted. Specific hazards Not known. 5.3. Advice for firefighters Special Fire Fighting Procedures If risk of water pollution occurs, notify appropriate authorities. Protective equipment for fire-fighters Wear full protective clothing. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal precautions, protective equipment and emergency procedures Wear protective clothing as described in Section 8 of this safety data sheet. 6.2. Environmental precautions Do not discharge onto the ground or into water courses. 6.3. Methods and material for containment and cleaning up Stop leak if possible without risk. Absorb in vermiculite, dry sand or earth and place into containers. Flush with plenty of water to clean spillage area. Do not contaminate water sources or sewer. 6.4. Reference to other sections Wear protective clothing as described in Section 8 of this safety data sheet. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for safe handling Avoid spilling, skin and eye contact. 2 / 5
7.2. Conditions for safe storage, including any incompatibilities Store in tightly closed original container in a dry, cool and well-ventilated place. Keep in original container. 7.3. Specific end use(s) The identified uses for this product are detailed in Section 1.2. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control parameters 8.2. Exposure controls Protective equipment Engineering measures Provide adequate ventilation. Observe occupational exposure limits and minimize the risk of inhalation of vapours. Respiratory equipment No specific recommendation made, but respiratory protection may still be required under exceptional circumstances when excessive air contamination exists. Hand protection Use suitable protective gloves if risk of skin contact. Eye protection If risk of splashing, wear safety goggles or face shield. Other Protection Wear appropriate clothing to prevent any possibility of skin contact. Hygiene measures DO NOT SMOKE IN WORK AREA! Wash hands at the end of each work shift and before eating, smoking and using the toilet. Wash promptly if skin becomes wet or contaminated. Promptly remove any clothing that becomes contaminated. Use appropriate skin cream to prevent drying of skin. When using do not eat, drink or smoke. SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on basic physical and chemical properties Appearance Liquid 9.2. Other information No information required. SECTION 10: STABILITY AND REACTIVITY 10.1. Reactivity No specific reactivity hazards associated with this product. 10.2. Chemical stability Stable under normal temperature conditions. 10.3. Possibility of hazardous reactions Not relevant 10.4. Conditions to avoid Avoid excessive heat for prolonged periods of time. 10.5. Incompatible materials Materials To Avoid No specific, or groups of materials are likely to react to produce a hazardous situation. 3 / 5
10.6. Hazardous decomposition products During fire, toxic gases (CO, CO2) are formed. SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on toxicological effects Inhalation In high concentrations, vapours may irritate throat and respiratory system and cause coughing. Ingestion May cause discomfort if swallowed. Skin contact Liquid may irritate skin. Eye contact Spray and vapour in the eyes may cause irritation and smarting. SECTION 12: ECOLOGICAL INFORMATION Ecotoxicity Not regarded as dangerous for the environment. 12.1. Toxicity The product is not toxic. 12.2. Persistence and degradability No information available. 12.3. Bioaccumulative potential Bioaccumulative potential No data available on bioaccumulation. 12.4. Mobility in soil Mobility: The product is non-volatile. 12.5. Results of PBT and vpvb assessment No information available. 12.6. Other adverse effects None known. SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Dispose of waste and residues in accordance with local authority requirements. SECTION 14: TRANSPORT INFORMATION General Road Transport Notes Rail Transport Notes Sea Transport Notes Air Transport Notes The product is not covered by international regulation on the transport of dangerous goods (IMDG, IATA, ADR/RID). Not Classified 14.1. UN number 4 / 5
14.2. UN proper shipping name 14.3. Transport hazard class(es) Transport Labels No transport warning sign required. 14.4. Packing group 14.5. Environmental hazards Environmentally Hazardous Substance/Marine Pollutant No. 14.6. Special precautions for user 14.7. Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code SECTION 15: REGULATORY INFORMATION 15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture Statutory Instruments The Chemicals (Hazard Information and Packaging for Supply) Regulations 2009 (S.I 2009 No. 716). Approved Code Of Practice Classification and Labelling of Substances and Preparations Dangerous for Supply. Safety Data Sheets for Substances and Preparations. Guidance Notes Workplace Exposure Limits EH40. CHIP for everyone HSG(108). 15.2. Chemical Safety Assessment SECTION 16: OTHER INFORMATION Issued By Technical Manager Revision Date 22.05.15 Revision. SDS No.. Risk Phrases In Full NC Hazard Statements In Full Disclaimer This information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process. Such information is, to the best of the company's knowledge and belief, accurate and reliable as of the date indicated. However, no warranty guarantee or representation is made to its accuracy, reliability or completeness. It is the user's responsibility to satisfy himself as to the suitability of such information for his own particular use. 5 / 5