Material Safety Data Sheet

Similar documents
Material Safety Data Sheet

Material Safety Data Sheet

WolfBite Mega Bed Adhesion Solution for Polycarbonate and PC-ABS. Wolfbite_MEGA For use with 3D printers only.

Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet

1 Easton Oval Poison Control Center Columbus, OH

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Product No Cresyl Violet Acetate, Certified. Issue Date ( ) Review Date ( )

SECTION 1. CHEMICAL PRODUCT AND COMPANY INFORMATION SECTION 2. HAZARDS IDENTIFICATION

MATERIAL SAFETY DATA SHEET C-MUL SUN DRILLING PRODUCTS CORP.

SAFETY DATA SHEET (SDS) Stick-It! Rear View Mirror Adhesive

Issuing Date 17-May-2013 Revision Date 21-Nov-2016 Revision Number 1 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING

Material Safety Data Sheet KRAZY GLUE CO. Revised: 2/4/13 Replaces: 12/14/09. Date of printed: 02/04/13

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET Earth Juice Natural Up. 1. Product And Company Identification

MATERIAL SAFETY DATA SHEET acc. to ISO/DIS 11014

MATERIAL SAFETY DATA SHEET Date Revised: 7/18/2013 Page: 1 Mold Release MSDS Number: SECTION 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Safety Data Sheet. Section 2 Hazards Identification. Section 3 Composition/Information on Ingredients

MATERIAL SAFETY DATA SHEET

Revision date Identification of the Substance/Preparation and of the Company/Undertaking

Material Safety Data Sheet Product No Colloidal Silica Suspension, 0.06µm

Safety Data Sheet BOND 8000A

SAFETY DATA SHEET Earth Juice Elements Grow. 1. Product And Company Identification

SAFETY DATA SHEET Pet Stain and Odor Eliminator. 1. Product and Company Identification. 2. Hazards Identification

PRODUCT NAME : PLASTER OF PARIS UPC NUMBER : , , , PRODUCT USE/CLASS : Plaster of Paris

SAFETY DATA SHEET. This product contains no reportable hazardous components under OSHA 29 CFR and European Regulation (EC) No 1272/2008.

Material Safety Data Sheet

1. IDENTIFICATION OF THE SUBSTANCE OR PREPARATION AND OF THE COMPANY. Concrete Stain Away. Date: September 1, 2015

*MATERIAL SAFETY DATA SHEET*

1. Product And Company Identification

Issue Date: 16-Feb-2012 Revision Date: 24-Feb-2015 Version 2 1. IDENTIFICATION. United 894 ZYME-OUT. For industrial and institutional use only.

Version /28/2006

IDQ Operating, Inc. 44 Old Ridgebury Road Suite 300 Danbury, CT Tel Product And Company Identification

Safety Data Sheet BOND 20

M A T E R I A L S A F E T Y D A T A S H E E T

MATERIAL SAFETY DATA SHEET

1. PRODUCT AND COMPANY IDENTIFICATION

1. Product And Company Identification

1. PRODUCT AND COMPANY IDENTIFICATION

Recommended use of the chemical and restrictions on use: Road stabilization and dust control.

Carolina Narrow Fabric Company

MATERIAL SAFETY DATA SHEET MSDS DATE: 3/13/12

Material Safety Data Sheet D-Xylose

Version 3.0 Print Date 07/08/2012 REVISION DATE: 07/07/2012 SECTION 1 - PRODUCT IDENTIFICATION / PREPARATION INFORMATION

Safety Data Sheet. Issue Date: 05-Jan-2010 Revision Date: 24-Nov-2014 Version Number: Identification. 2. Hazards Identification

MATERIAL SAFETY DATA SHEET MSDS DATE: 9/3/ Surfactant SUPERSEDES: None

MATERIAL SAFETY DATA SHEET 2. COMPOSITION/INFORMATION ON INGREDIENTS

MATERIAL SAFETY DATA SHEET FILE NO.: 4110 NAME OF PRODUCT: HI-LITE SOLUTIONS PAINT PREP CLEANER MSDS DATE: 03/10/2010

Version /30/2006

SAFETY DATA SHEET According to Regulation (EC) No 1907/2006 (REACH)

1. Chemical Product and Company Identification

Safety Data Sheet Product No Tissue-Tack Adhesive Issue Date ( ) Review Date ( )

WISP TOOTHBRUSH. Skin Contact: Prolonged or repeated skin contact may cause irritation. 3 COMPOSITION / INFORMATION ON INGREDIENTS

Issue Date 03-Jan-2011 Revision Date 01-May-2013 Version 1 1. PRODUCT AND COMPANY IDENTIFICATION

Safety Data Sheet. AB Page 1 of 6 January 01, Relevant routes of exposure: Eye contact, skin contact, inhalation, ingestion

MAPP Gas. Material Safety Data Sheet

Issue Date: 29-Jul-2013 Revision Date: 08-Sep-2014 Version 1 1. IDENTIFICATION. Multi-Purpose Neutral Cleaner. 2. HAZARDS IDENTIFICATION

Version /08/2003

Issuing Date No data available Revision Date 21-Nov-2016 Revision Number 1

24 hr. Emergency Contact (CHEMTREC) US Tel: Int l. Tel CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Safety Data Sheet. Section 1 Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET FILE NO.: 378 NAME OF PRODUCT BIO-STAT MSDS DATE: 12 /18 /06

Material Safety Data Sheet

Issuing Date No data available Revision Date 06-Feb-2015 Revision Number 1

MATERIAL SAFTEY DATA SHEET

MATERIAL SAFETY DATA SHEET WIZARDS METAL POLISH MSDS DATE: 7/31/2010

Material Safety Data Sheet

TAMMSFLEX NS PART A Version 1. Print Date 06/10/2008 REVISION DATE: 02/07/2008

: TAMMS EXPRESS REPAIR 50# BG

MORTAR COLOR#719 LIGHT CHOCOLATE -12/2.5 Version 1 Print Date 07/03/2007 REVISION DATE: 06/16/2005

SAFETY DATA SHEET SECTION

Mearlin Magnapearl 2000

Version /29/2006

Issuing Date January 5, 2015 Revision Date New Revision Number 0 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING

Material Safety Data Sheet MUELLER HINTON AGAR 500GM. Section 1 - Chemical Product and Company Identification

SAFETY DATA SHEET Just for Coir Bloom Part B. 1. Product And Company Identification

Issuing date no data available Revision Date 13-Jul-2015 Version 3 1. PRODUCT AND COMPANY IDENTIFICATION

Issue Date: 29-Jul-2013 Revision Date: 08-Sep-2014 Version 1 1. IDENTIFICATION. Enviro Patrol Restroom Cleaner 2. HAZARDS IDENTIFICATION

MATERIAL SAFETY DATA SHEET

SECTION 1 CHEMICAL PRODUCT AND IDENTIFICATION. FRP; molded Fiberglass Reinforced Plastics. SECTION 2 HAZARD IDENTIFICATION

OSHA regulated. NE NE No No No. NE NE No No No

Material Safety Data Sheet

Safety Data Sheet. Section 1 - Chemical Product and Company Identification

: DIAMOND - PLATE LIGHT REFLECTIVE

Plexiglas (R) SG PLUS Impact Acrylic Sheet Material Safety Data Sheet

Issue Date: 09-Jan-2013 Revision Date: 06-Feb-2017 Version Number: Identification. 2. Hazards Identification

Issue Date: 11-Jan-2013 Revision Date: 01-Nov-2017 Version Number: Identification

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET MSDS DATE: 7/08/09 SCENT WINTERGREEN SUPERSEDES: 6/23/08

SAFETY DATA SHEET Fresh Air Lemon Odor Counteractant. 1. Product and Company Identification. 2. Hazards Identification

Version /28/2006

Safety Data Sheet. (Sorbitan Tristearate) DATE PREPARED: 8/14/2015. Section 1. Product and Company Identification

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

MSDS REPORT - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION SAN FERNANDO MISSION BVD MISSION HILLS, CA 91345

MATERIAL SAFETY DATA SHEET

Transcription:

Material Safety Data Sheet F 1. Chemical Product and Company Identification DESCRIPTION: ELMER'S ALL-PURPOSE GLUE STICK PRODUCT TYPE: SYNTHETIC POLYMER MIXTURE APPLICATION: FOR PRODUCT CODES SEE SECTION 16 Manufacturer/Supplier Information MSDS Prepared by: Elmer's Products, Inc. Emergency Phone Number 460 Polaris Parkway Poison Control Center Westerville, OH 43082 1-888-516-2502 For additional health, safety or regulatory information, call 1-888-435-6377. Call 1-800-848-9400 to place an order or request additional MSDSs. 2. Composition, Information on Ingredients No hazardous ingredients known to company. 3. Hazards Identification 3.1 Emergency Overview Appearance Odor CAUTION! White solid Slight bland 1 of 9 12/22/14, 5:11 PM

Not a significant fire hazard. May cause irritation of nose, throat and lungs if allowed to become airborne. May cause eye irritation HMIS Rating HEALTH = 1 (slight) FLAMMABILITY = 0 (minimal) REACTIVITY = 0 (minimal) 3.2 Potential Health Effects Immediate Hazards INGESTION: Not expected to be harmful under normal conditions of use. INHALATION: Not expected to be harmful under normal conditions of use. However, if allowed to become airborne, may cause irritation of nose, throat and lungs. SKIN: May cause irritation on prolonged or repeated contact. EYES: May cause irritation on prolonged or repeated contact. Delayed Hazards None of the components present in this product at concentrations equal to or greater than 0.1% have been listed by NTP, classified by IARC, nor regulated by OSHA as a carcinogen. 4. First Aid Measures INGESTION: If accidentally swallowed, dilute by drinking large quantities of water. Immediately contact poison control center or hospital emergency room for any other additional treatment directions. INHALATION: Remove to fresh air. SKIN: In case of irritation, flush with water. EYES: Immediately flush eyes with plenty of water. Call 2 of 9 12/22/14, 5:11 PM

a physician if irritation persists. 5. Fire Fighting Measures Autoignition Temperature Not available Upper/Lower Flammable Limits Not applicable Up/Lower Explosive Limits, % by Vol Not applicable Flash Point Not applicable Will not burn unless water has evaporated. Dried material may burn. In case of fire, water should be used to keep fire-exposed containers cool. 6. Accidental Release Measures Sweep (scoop) up and remove to a chemical disposal area. Prevent entry into natural bodies of water. 7. Handling and Storage 7.1 Handling Handle in accordance with good industrial hygiene and safety practices. Always use appropriate Personal Protective Equipment (PPE). INHALATION: Avoid prolonged or repeated breathing of dust or vapor. SKIN: Avoid prolonged or repeated contact with skin and clothing. EYES: Avoid prolonged or repeated contact with eyes. 7.2 Storage Keep from freezing. Store in a cool, dry place. Keep containers tightly closed. 8. Exposure Controls/Personal Protection 3 of 9 12/22/14, 5:11 PM

8.1 Exposure Controls If airborne contaminants are generated when the material is heated or handled, sufficient ventilation in volume and air flow patterns should be provided to keep air contaminant concentration levels below acceptable criteria. 8.2 Personal Protection Where air contaminants can exceed acceptable criteria, use NIOSH/MSHA approved respiratory protection equipment. Respirators should be selected based on the form and concentration of contaminants in air in accordance with OSHA laws and regulations or other applicable standards or guidelines, including ANSI standards regarding respiratory protection. Use goggles if contact is likely. Wear impervious gloves as required to prevent skin contact. 8.3 Exposure Guidelines None established 9. Physical and Chemical Properties Percent Volatiles 59 ph @ 25 C 10 Specific Gravity 1.0 Appearance White solid Autoignition Temperature Not available Boiling Point 100 deg C Vapor Density (Air=1) < 1 Vapor Pressure, mm Hg @ 20 C 17.5 Evaporation Rate (Butyl Acetate=1) < 1 Upper/Lower Flammable Limits Not applicable Up/Lower Explosive Limits, % by Vol Not applicable Flash Point Not applicable Freezing Point 0 deg C Odor Slight bland Odor Threshold, ppm Not available Solubility in Water Dispersible 4 of 9 12/22/14, 5:11 PM

10. Stability and Reactivity Normally stable as defined in NFPA 704-12(4-3.1). Incompatibilities: Oxidizers, acids or bases. Decomposition products may include: Oxides of carbon and nitrogen. Hazardous polymerization: Will not occur. Other Hazards: None known to company. 11. Toxicological Information See Section 3 Hazards Identification information. 12. Ecological Information Not determined. 13. Disposal Considerations Dispose of according to local, state/provincial, and federal requirements. 5 of 9 12/22/14, 5:11 PM

14. Transport Information 14.1 U.S. Department of Transportation (DOT) The data provided in this section is for information only and may not be specific to your package size. You will need to apply the appropriate regulations to properly classify your shipment for transportation. Non-Regulated. 14.2 Canadian Transportation of Dangerous Goods (TDG) Non-Regulated. 15. Regulatory Information (Selected Regulations) 15.1 U.S. Federal Regulations OSHA Hazard Communication Standard 29CFR1910.1200 This material is not a "health hazard" or a "physical hazard" as determined when reviewed according to the requirements of the Occupational Safety and Health Administration 29 CFR Part 1910.1200 "Hazard Communication" Standard. SARA Title III: Section 311/312 Does not meet any hazard category SARA Title III Section 313 and 40 CFR Part 372 6 of 9 12/22/14, 5:11 PM

This product contains the following toxic chemical(s) subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986, and Subpart C-Supplier Notification Requirement of 40 CFR Part 372. None required per SARA TITLE III SECTION 313. TSCA Section 8(b) Inventory All reportable chemical substances are listed on the TSCA Inventory. We rely on certifications of compliance from our suppliers for chemical substances not manufactured by us. 15.2 Canadian Regulations Workplace Hazardous Materials Information System (WHMIS) This product has been classified in accordance with the hazard criteria of the Controlled Products Regulation (CPR) and the MSDS contains all the information required by the CPR. Not a controlled product Canadian Environmental Protection Act (CEPA) All reportable chemical substances are listed on the Domestic Substances List (DSL) or otherwise comply with CEPA new substance notification requirements. National Pollutant Release Inventory (NPRI) This product contains the following chemical(s) subject to the reporting requirements of the Canadian Environmental Protection Act (CEPA) subsection 16(1), National Pollutant Release Inventory. None required. 16. Other Information 7 of 9 12/22/14, 5:11 PM

AP (Non-Toxic): Products bearing the AP Certified Product Seal of The Art & Creative Materials Institute, Inc. (ACMI) are certified in a program of toxicological evaluation by a medical expert to contain no materials in sufficient quantities to be toxic or injurious to humans or to cause acute or chronic health problems. This program is reviewed by ACMI's Toxicological Advisory Board. These products are certified by ACMI to be labeled in accordance with the chronic hazard labeling standard, ASTM D-4236 and Federal law, P.L. 100-695. In addition, there is no physical hazard as defined within 29 CFR Part 1910.1200(c). Additionally, products bearing the AP Seal meet the specific requirements of material, workmanship, working qualities and color described in the appropriate product standard issued by ACMI or other recognized standards organization. MSDS covers items: U.S.: E501, E510, E511, E512, E515, E516, E517, E521, E542, E553, E556, E1522, E1530, E3202, E5006, E5019, E5020, E64512 Canada: 60200, 60201, 60202, 60591, 60592, 60593, 60594, 60596, 60598, 60601TR, 61576, 65004, E1530CA User's Responsibility The OSHA Hazard Communication Standard 29CFR 1910.1200 and the Workplace Hazardous Materials Information System (WHMIS) require that the information contained on these sheets be made available to your workers. Educate and train your workers regarding OSHA and WHMIS precautions. Instruct your workers to handle this product properly. Consult with appropriate experts to guard against hazards associated with use of this product and its ingredients. Disclaimer SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, CONCERNING THE PRODUCT OR THE MERCHANTABILITY OR FITNESS THEREOF FOR ANY PURPOSE, except that the product shall conform to contracted specifications, and that the product does not infringe any valid United States or Canadian patent. No claim of any kind shall be greater in amount than the purchase price of the quantity of product in respect of which damages are claimed. In no event shall Seller be liable for incidental or consequential damages, whether Buyer's claim is based on contract, breach of warranty, negligence or otherwise. CURRENT ISSUE: 22-FEB-12 8 of 9 12/22/14, 5:11 PM

PREVIOUS ISSUE: 12-JAN-12 9 of 9 12/22/14, 5:11 PM