ARC FLASH PROTECTION AT HEIGHTS

ARC FLASH PROTECTION AT HEIGHTS

Arc Rated Fall Protection FallTech has you covered with Arc Rated products for the four components of a Personal Fall Arrest System (PFAS). Anchorage Connector When working in an atmosphere where arc flash is a potential risk, a PFAS is nothing without a tie off, anchorage point. FallTech offers Arc Rated anchorage solutions for these challenging work environments. BodyWear FallTech Arc Rated Harnesses were developed specifically to protect workers at heights or in confined spaces where arc flash or arc blast is a possibility. FallTech Arc Rated products are tested to meet the requirements of ANSI, OSHA and ASTM. Connectors Connectors are a critical component of the PFAS. FallTech offers a variety of Arc Rated connectors with Soft Pack energy absorbers and a variety of end connectors. Devices FallTech s Arc Rated Self-Retracting Devices are built for workplaces where you need greater access to distant anchors, greater mobility and short stopping distances, compared to traditional lanyards. Arc Rated Fall Protection Designed with You in Mind Stands Up To The Harshest Of Conditions Fall Protection is designed to keep workers safe when working near energized electrical sources, where an arc flash or an arc blast is a potential risk. Whether on a scissor lift or bucket truck, FallTech Arc Rated fall protection offers superior durability and also delivers superior protection, reducing work related injuries at heights. The FallTech Advantage You can work in confidence knowing your FallTech Arc Flash-Rated fall protection products are engineered and manufactured to the highest standards of safety and reliability, complying with OSHA Regulations, ANSI standards and the third party testing of ASTM F887. FallTech Test Accreditation FallTech s internal testing lab has met the requirements of the IAS Accreditation Criteria for Testing Laboratories (AC89) and has demonstrated compliance with ISO/IEC Standard 17025:2005. ANSI Z359.14 Compliant OSHA CFR1926.502 and CFR1910.66 Compliant ASTM F887 Compliant www.falltech.com

Arc Flash The Ultimate in Arc Rated Performance FallTech Arc Rated Harnesses FallTech is known for its comfortable designs in bodywear, and that is why we designed the Arc Rated family of harnesses, to provide protection and long lasting wear. The Arc Rated harness quickly self-extinguishes and prevents melting or dripping, specifically for workers near energized electrical sources, where arc flash or arc blast exposure is present. FallTech Arc Rated harnesses are ASTM F887 third-party tested to ensure workers are protected from falls, even after an arc flash of 40 cal/cm2. Reduce SRD and lanyard connection time with an upright coated Dorsal D-ring. Super soft edging around the neck, will not chafe for added comfort. Shoulder pads for all day comfort. Visi-Lock quick connect buckles include a green indicator for visual assurance when connected. 6 torso-sewn waist support pad on the construction-belted harness keeps your tools where you need them. Extreme duty removable work belt, on selected models, is designed to stay in position even with tool pouches. Paired front torso rescue loops. Three coated hip D-rings for added protection against arc flash or blast. Arc Rated Nomex /Kevlar blend or Nylon construction. Coated or leather insulated hardware throughout. 8070R Arc Flash D-ring Extender with Choke Loop. PVC Coated Alloy Steel, 18 Length, with heavy-duty 1-3/4 Kevlar Webbing. Arc Flash Nomex Shoulder Yoke/Pad Assembly. Arc Flash Nomex Leg Pads for most Arc Flash rated harnesses. 8366AF 7004YAF 5003AF

Bodywear Nomex /Kevlar Harnesses Nomex/Kevlar blend webbing provides exceptional protection against arc flash. Because Kevlar webbing is fire-resistant, the harness will retain its performance qualities in an event of a fall after an arc flash incident. Belted and non-belted configurations available. Coated or leather insulated hardware. Nomex/Kevlar webbing is fire-resistant and self-extinguishing. Quick connect attachments available on some configurations. ANSI Z359.1-2007; Z359.12-2009 OSHA 1910.269 & 1926. ASTM F887 tested with fire-resistant (FR) properties. 8073R 8076R 7047R Belted Harnesses SIZED* 3 COATED D-RINGS BACK & SIDE QUICK CONNECT LEGS, CHEST, BELT WITH LEATHER INSULATIONS COATED BUCKLE LEGS, CHEST, BELT PAIRED FRONT TORSO RESCUE LOOPS COATED BUCKLE TORSO ADJUSTERS SHOULDER, LEGS, & WAIST PADS 8070R 8070 8073R 8073 * For Sized Harnesses, Add: S for Small; M for Medium; L for Large; or XL for X Large to the end of the item number. Example: 8070RS Non-Belted Harnesses SIZED* 1 COATED BACK D-RING QUICK CONNECT LEGS, CHEST, BELT WITH LEATHER INSULATIONS COATED BUCKLE LEGS, CHEST, BELT FRONT D-RING PAIRED FRONT TORSO RESCUE LOOPS COATED BUCKLE TORSO ADJUSTERS 8076R (No Belt) 8076 UniFit, XL (No Belt) 7047R (No Belt) 7047 UniFit, XL, 2X (No Belt) 7047BFD (No Belt) * For Sized Harnesses, Add: S for Small; M for Medium; L for Large; or XL for X Large to the end of the item number. Example: 7047RS Crossover Climbing Harnesses SIZED* 4 COATED D-RINGS BACK AND SIDE QUICK CONNECT LEGS, CHEST, BELT WITH LEATHER INSULATIONS COATED BUCKLE TORSO ADJUSTERS 8060B UniFit www.falltech.com

Bodywear Nylon Harnesses A high-strength nylon option offers excellent arc flash protection and will not melt or drip in the event of an arc flash. This blend of high-strength nylon webbing will retain its performance qualities in the event of a fall after an arc flash incident. Belted and non-belted configurations available. Leather insulated hardware. Nylon won t drip or melt in the event of an arc flash. ANSI Z359.1-2007; Z359.12-2009 OSHA 1910.269 & 1926. ASTM F887 tested with fire-resistant (FR) properties. Belted Harnesses 8081 8087 7051 SIZED DORSAL WEB LOOP W/ 2 SIDE D-RINGS QUICK CONNECT LEGS, CHEST, BELT W/ LEATHER INSULATIONS BUCKLE LEGS, CHEST, BEST W/ LEATHER INSULATORS PAIRED FRONT TORSO RESCUE LOOPS BUCKLE TORSO ADJUSTERS W/ LEATHER INSULATORS SHOULDER, LEGS, & WAIST PADS 8081R 8081 8084R 8084 * For Sized Harnesses, Add: S for Small; M for Medium; L for Large; or XL for X Large to the end of the item number. Example: 8081RXL Non-Belted Harnesses SIZED SINGLE WEB LOOP QUICK CONNECT LEGS & CHEST BUCKLE LEGS & CHEST PAIRED FRONT TORSO RESCUE LOOPS BUCKLE TORSO ADJUSTERS W/ LEATHER INSULATORS 8087R_ 8087 UniFit 7051R_ 7051 UniFit, XL, 2X * For Sized Harnesses, Add: S for Small; M for Medium; L for Large; or XL for X Large to the end of the item number. Example: 8087L SIZED* 1 COATED BACK D-RING COATED BUCKLE LEGS, CHEST, BELT 7049 UniFit, XL Crossover Climbing Harness SIZED* 4 COATED D-RINGS BACK & SIDE COATED BUCKLE LEGS, CHEST, BELT COATED BUCKLE TORSO ADJUSTERS SHOULDER, LEGS, & WAIST PADS 8063B UniFit

Anchorages Arc Rated Choker anchors feature a heavy-duty 1-¾ Kevlar webbing with a PVC coated D-ring and a choke loop. DESCRIPTION SIZE D-RINGS MATERIAL 72493FT 1-3/4 Heavy-duty 3 Length PVC Coated Steel Kevlar 72494FT 1-3/4 Heavy-duty 4 Length PVC Coated Steel Kevlar 72493FT 72494FT Connectors FallTech Arc Flash Rated Lanyards offer Kevlar webbing in both single and double-leg models, with a wide range of connectors to fit your work settings and environments. These connectors are wrapped in a Nomex cover for protection from heat and accidental spatter, with a speciallywoven Soft Pack energy absorber, designed to limit arrest forces. 8242L 8242YL 82423L 8242Y3L 8242YAF DESCRIPTION LENGTH LEGS HARNESS CONNECTORS ANCHORAGE CONNECTORS MATERIALS 8209AF Adjustable Restraint Lanyard 4-6 1-SINGLE 1 Choke Loop 1 Steel Snap Hook Nomex and Kevlar Web 8242L Single Leg Shock Absorbing Lanyard 6 1-SINGLE 1 Loop 1 Steel Snap Hook Nomex and Kevlar Web 8242YL Y Leg Shock Absorbing Lanyard 6 Y-LEG 1 Loop 2 Steel Snap Hooks Nomex and Kevlar Web 82423L Single Leg Shock Absorbing Lanyard 6 1-SINGLE 1 Loop 1 Steel Rebar Hook Nomex and Kevlar Web 8242Y3L Y Leg Shock Absorbing Lanyard 6 Y-LEG 1 Loop 2 Steel Rebar Hooks Nomex and Kevlar Web 8242AF Single Leg Shock Absorbing Lanyard 6 1-SINGLE 1 Loop 2 Steel Snap Hooks Nomex and Kevlar Web 8242YAF Y Leg Shock Absorbing Lanyard 6 Y-LEG 1 Steel Snap Hook 2 Steel Snap Hooks Nomex and Kevlar Web 82423AF Single Leg Shock Absorbing Lanyard 6 1-SINGLE 1 Steel Snap Hook 1 Steel Rebar Hook Nomex and Kevlar Web 8242Y3AF Y Leg Shock Absorbing Lanyard 6 Y-LEG 1 Steel Snap Hook 2 Steel Rebar Hooks Nomex and Kevlar Web

DuraTech Arc Flash SRD s Self-Retracting Devices DuraTech Arc Flash rated SRD s come in a variety of configurations to meet the requirements of your work environment. A lightweight, compact design offers a durable housing, a ¾ Kevlar webbing lifeline with the option of a Nomex protected shock absorber, and a wide variety of connection options. The DuraTech Arc Rated SRD s are extremely effective fall protection after an arc flash or blast up to 40 cal/cm2, making it ideal where high voltage electricity is a critical concern. FallTech s Arc Rated SRD s offer greater access to distant anchors, greater mobility and short stopping distances for added reliability. 6 DuraTech Mini 6 DuraTech Mini Lightweight with typical arrest distances as low as 26. 9 DuraTech Max Maximum stopping power, tested up to 5 below the D-ring. 11 DuraTech - Longer working length with maximum stopping power. User Capacity 310 lbs. ANSI and 425 lbs. OSHA Certified to: ANSI Z359.14, OSHA CFR1926.502, CFR1910.66, ASTM F887. DURATECH ARC FLASH SRD S HOUSING SWIVEL EYE CONNECTORS LEG-END CONNECTORS Steel Carabiner Carabiner with Alignment Clip Aluminum Carabiner Steel Snap Hook Steel Rebar Hook Aluminum Snap Hook Aluminumum Rebar Hook Ext + Aluminum Snap 6 Mini SINGLE LEG: ¾ Kevlar web lifeline with a Nomex protected energy absorber. 72906SC1 72906SC3 72906SC4 72906SC5 72906SESL 72906SES6 6 Mini TWIN LEG: ¾ Kevlar web lifeline with a Nomex protected energy absorber. 72906TB1 72906TB3 72906TB4 72906TB5 9 Max SINGLE LEG: ¾ Kevlar web lifeline with a Nomex protected energy absorber. 82909SC1 82909SC3 82909SC6 82909SC5 9 Max TWIN LEG: ¾ Kevlar web lifeline with a Nomex protected energy absorber. 82909TB1 82909TB3 82909TB6 82909TB5 11 SINGLE LEG: ¾ Kevlar web lifeline with a longer working length. 82911SC1 82911SC3 82911SG6 82911SG5 Choke Loop Aluminum Captive- Eye Carabiner 72906SC3 72906TB4 9 DuraTech Max 82909SC1 82909TB1 11 DuraTech 82911SC1 82911SC3

FallTech Discover the full selection of Arc Rated Fall Protection products at www.falltech.com www.falltech.com 1306 S. Alameda St. Compton, CA 90221-4803 2016 800.719.4619 323.752.5613 Warning: All Fall Protection equipment should only be used after reading and understanding the manufacturer s instructions and proper training on the product. Failure to receive proper training and follow the manufacturer s instructions could result in serious injury or death. #MS23.1 ALX www.falltech.com