What This Presentation Covers

Similar documents
Working in Cold Environments

Staying Warm in the Winter

Guide to Cold Stress at Work

Cold Weather Safety Program

1.0 INTRODUCTION. Scope

EXPOSURE TO THE COLD. November 6, 2013

Guidelines on Working in Cold Conditions Re-endorsed by Annual Conference 2017

Magdalen Court School

Tioga ISD Athletic Department Heat Policy

Does this topic relate to the work the crew is doing? If not, choose another topic.

GUIDELINES ON WORKING IN COLD CONDITIONS

Cold and Heat Emergencies Video Cold & Heat Emergencies

US Pipelines & Logistics Contractor Toolkit

Possible Outcomes of inadequate climatic cold management:

Cold Weather Emergencies

WINTER SAFETY TOOLS IMCOM SAFETY WEBSITE ARMY COMBAT READINESS CENTER BE READY FOR WINTER.

Doc #: 1000-AD Revision: - HEAT/COLD STRESS AWARENESS POLICY. Author(s): Tammie Lavoie, John Dunlop

Heat Stress Policy UFEHS-SAFE-04/04/01 Environmental Health and Safety Finance and Administration University of Florida

CWA Occupational Safety and Health Fact Sheet #18. Temperature Extremes & the Workplace

HEAT AND COLD STRESS Revision Date: 04/2017

THERMAL COMFORT GUIDELINES

BP OIL -- TOLEDO REFINERY

Chapter 2. Lesson 8. Cold Weather Injuries. What You Will Learn to Do. Linked Core Abilities. Skills and Knowledge You Will Gain along the Way

LESSON 8: COLD WEATHER INJURIES

Tailgate Safety Training for Landscaping and Horticultural Services

EXTREME HEAT. Extreme Heat Related Terms. Heat Wave - Prolonged period of excessive heat, often combined with excessive humidity.

Identify Hazards Cold (temperature 40 F and below)

Heat Stress Prevention Written Program Laredo ISD Safety/Risk/Emergency Management Department

Temperature Extremes Program

Heat Stress Prevention Program

FISD LIGHTNING GUIDELINES

Shivering - no patient should ever shiver in care. Shivering is a useless way to produce heat.

Environmental Considerations

ACTU GUIDELINES FOR WORKING IN SEASONAL HEAT

Cold Weather Injuries 1.0 Contact Hours Presented by: CEU Professor

Cold Weather Vehicle Problems: The cold can be challenging to the proper function of vehicles, especially those running on diesel.

HEAT ILLNESS PREVENTION TRAINING. Presented by: Du-All 2018

UNDERSTANDING JOB HAZARDS

HEAT ILLNESS PREVENTION PLAN

Appendix D: Physical and Environmental Hazards

Don t loose your cool! Cold Water Immerison SECTION 1

HEAT STRESS Prevention Program

Special Olympics Indiana January 7-9, 2018 Lawrenceburg, IN

Managers and supervisors. 28/06/2016 Version number: v0

HEAT MANAGEMENT PROCEDURE

Extension is almost done building a new website! Please take a sneak peek or read about our redesign process.

Heat Stress & Illness Prevention

Environmental Emergencies

75 Years of Health and Safety Guidance

GUIDE. Feeling the Heat

Heat Illness Prevention Plan. California State University, Chico

California State University Bakersfield Heat Illness Prevention Policy. Revised November 2017

Wildland Fire School. Heat Illness Prevention Program

ISAF OFFSHORE SPECIAL REGULATIONS Appendix E

19. HEAT STRESS ON THE FARM

Doc. No. SP-14 Rev. No. 1 Date: 07/17/2012 Page 1 of 08

First Aid - immediate care that is given to the victim of an injury or illness until experts can take over - Oftentimes, it s the difference between

Heat Stress. Dangers. Prevention. Treatment MiCAH Safety Solutions, LLC

Heat Stress Prevention

Workplace Heat Illness Prevention

Today s Talk: Mon Tue Wed Thu Fri Sat Sun

HEAT INJURIES. MANSCEN Safety Office

Outline What is it and what to expect Pilot physiology Oxygen equipment per FAA Wave windows Relevant FAR s NCSA Rules

Print PERSONAL PROTECTIVE EQUIPMENT

University of Vermont Department of Physical Plant Personal Protective Equipment Program

Working in Cold Conditions Standard

Section 2 Safety, Tools and Equipment, Shop Practices Unit 4 General Safety Practices. Unit Objectives. Pressure Vessels and Piping (1 of 2)

Employer and supervisor. Joint Health & Safety Committee - Ministry of Labour

"PERSONAL PROTECTIVE EQUIPMENT IN CONSTRUCTION ENVIRONMENTS"

Safety Management System. Initial Revision Date: Version Revision No. 02 GENERAL SAFETY HEALTH PROVISION

A Health & Safety Risk Management Tool that you can use today. Scott Norman, CIH, CSP Health & Safety Program Manager Bay West LLC

Fire & Ice. Work, especially in construction or infrastructure. Protecting Workers in Extreme Temperatures. Worker Protection Peer-Reviewed

USAG Humphreys Cold Weather. Winter Safety Guide

CHAPTER 42 TEMPERATURE EXTREMES: HEAT

Cold Stress From Cold Conditions. Identifying And Responding To Cold Exposure Hazards

HEAT ILLNESS TRAINING. By: Contra Costa Water District

AMMONIA REFRIGERATION IN WAREHOUSES

Civil Air Patrol Auxiliary of the United States Air Force

July Safety Topic: Grain Bin Safety & Heat Exhaustion

API Canada. Table of Contents

COMPLIANCE WITH THIS PUBLICATION IS MANDATORY

THE UNIVERSITY OF NEWCASTLE - DISCIPLINE OF MEDICAL BIOCHEMISTRY

James E. Thompson, Inc. dba JTS Construction

DUQUESNE UNIVERSITY. Liquid Nitrogen Safety

Heat Stress. Physical Agent Data Sheet (PADS) Description. Health Effects Heat Disorders

Mountain Hypothermia

NUS Safety & Health Guidelines Procedure No: OSHE/SOP/GL/08

Scarborough Fire Department. Personnel Protection Equipment

A comprehensive effort to prevent heat stress will improve worker safety and boost productivity.

Open toed shoes, sandals, or shoes made of loosely woven material should not be worn in the laboratory.

PART 4: IMPLEMENTATION & OP

PPE Refresher- Levels of Protection

LIQUID OXYGEN. General. Health Effects. Safety Considerations

UKA Medical Advice. Hot Weather

Best Cycling Gloves In India for Hand Numbness & Long Rides. By Abhishek Tarfe

HEAT, COLD AND NOISE STRESS

Chapter 2. Welding Safety Delmar, Cengage Learning

Heat Stress Training & Prevention

Laboratory Personal Protective Equipment & Hazard Assessment Tool

Hypothermia. Surviving the Cold

Transcription:

Working in Cold Environments Preventing Cold-related Injuries and Illnesses Presented by: Sean Halpin 1 What This Presentation Covers How the body maintains thermal (heat) balance, constant internal temperature. How the body reacts to cold conditions. Injuries and illnesses caused by exposure to cold. Preventive measures to minimize the hazards from cold exposure. 2 (510) 651-8289 1

Introduction Exposure to cold can occur when working outdoors or indoor artificial cold environments. Working for prolonged periods or in extreme cold conditions can lead to cold-related injuries and illnesses, permanent tissue damage, and death. Examples of artificial cold environments: Distribution Warehouses. Cold storage rooms, refrigerated warehouses. Freezers. Refrigerated tractor trailers. 3 Workers at Risk of Cold Exposure Examples of jobs at risk of exposure to cold: Airport ground personnel/ support. Longshore/dock work. Trucking, other transport. Food processing, packing, storage. Cold storage, warehousing. Ice making. Police, fire, and emergency response. Postal, delivery services. Sanitary/trash collecting. Utilities, communications. 4 (510) 651-8289 2

Maintaining Temperature: Balancing Heat Loss and Heat Production Most of the body s energy is used to maintain an internal (core) body temperature of approximately 98.6 F (37 C). The body does this through balancing heat loss and heat production. In cold conditions, the body reduces heat loss and increases heat production. Normal core body temperature: 98.6 F (37 C) Body s core area: (internal organs, especially ones vital for survival) Heart Brain Lungs Liver Kidneys 5 Maintaining Temperature: Balancing Heat Loss and Heat Production Over time, your body will decrease blood flow to your extremities and outer skin and shift it to the body core to keep the internal organs warm. This allows exposed skin and the extremities to cool rapidly and increases the risk of cold-related l d injuries, such as frostbite and hypothermia. 6 (510) 651-8289 3

Challenges from Cold Conditions Cold conditions force your body to work harder to maintain its temperature. The challenges you face from a cold environment include: Air temperature Wetness: rain, snow, ice, humidity; sweat; wet clothes; water. Air movement: wind speed (5 miles per hour and higher); blown air from fan in cold rooms, etc. 7 Wind Chill Effect Wind chill is the perceived temperature (what it feels like ) resulting from the effect of wind (wind speed) in combination with cold air (air temperature). The combined effect increases the rate of heat loss from exposed skin. The stronger the wind at a given temperature, the cooler the wind chill will be. (Refer to Wind Chill Chart on next slide) Example: When the air temperature is 15 F and wind speed is 10 mph, your exposed skin receives conditions equivalent to the air temperature being 35 F. Frostbite will develop in 30 If the wind speed doubles to 20 mph, it will feel like it s -42 F and frostbite will occur in only 10 minutes. 8 (510) 651-8289 4

Wind Chill Chart Example: If the temperature is -15 F and wind speed is 10 mph, it will feel like it s -35 F, and frostbite will develop in 30 minutes. If the wind speed doubles to 20 mph, the time for frostbite to occur drops to only 10 minutes. Source: National Oceanic and Atmospheric Administration (NOAA), National Weather Service 9 EVAPORATION: Heat loss in the form of vapor when body uses heat to evaporate moisture from skin surface (perspiration or sweat ). CONVECTION: Heat loss from wind (blown air from fan, etc.) removing the layer of warm air next to the skin; rate of heat loss depends on wind/air speed. How the Body Loses Heat RESPIRATION: Heat loss from lungs warming inhaled cold air, which is then exhaled. RADIATION: Heat loss from exposed body areas to the environment due to the difference between the temperature of the body and that of the cooler air (when air is <98.6 F). CONDUCTION: Heat loss through contact with a cooler object and transfer of heat to the cooler object; increases when in contact with cold wet objects (generally, conduction accounts for 2-3% of total heat loss in dry conditions; with wet clothes the loss is increased 5x, and rate of heat loss is 25x faster when a person is immersed in cold water). 10 (510) 651-8289 5

How the Body Loses Heat Each of these means of heat loss can play a large or small role in the development of a cold-related injury. In addition to air temperature, air movement (wind speed), and wetness, the skin surface area that is exposed to the cold is a factor in the amount of heat lost from the body. Factors in heat loss: Air temperature, wind speed, wetness. Area of skin surface exposed to cold (particularly in radiation). Contact with cold water or surfaces. 11 How the Body Produces Heat Your body must produce an equal amount of heat to counter-balance the heat loss in order to survive and stay active in the cold. Heat is produced in the following ways: Metabolism (food into energy): Biochemical reactions in the body which produce heat as a by-product. Physical Activity (exercise/work): Muscles produce most of the heat during physical work. Shivering: g Inefficient quivering of the muscles that increases the body s heat production; limited to a few hours because of depletion of muscle fuel stores and the onset of fatigue. 12 (510) 651-8289 6

Cold Stress If your body begins to lose heat faster than it is produced, your core body temperature drops below normal, and cold stress may result. Cold stress doesn t only happen when conditions are below freezing; it can also be brought about by temperatures in the 50's coupled with some rain and wind. 13 How does cold affect work performance? Uncomfortably cold working conditions (combination of temperature, wetness, wind) Immediate signs: Decreased alertness. Restlessness, lack of concentration. Impaired performance of complex mental tasks. Impaired ability to perform manual tasks. Lower work efficiency. Higher accident rates. Numbness, muscle weakness, stiffened joints. 14 (510) 651-8289 7

Factors Increasing Risk of Cold Injuries/Illnesses In general, people in good physical health are less susceptible to cold injury. In addition to weather conditions, the following factors may increase the risk of developing a cold injury: Previous cold-related injury Predisposing health conditions: Cardiovascular disease, Diabetes, Anemia, Sickle cell disease, Vibration/White finger disease, other conditions associated with poor circulation, Hypertension, Asthma. Fatigue, poor physical condition. Poor nutrition. Medication: Anti-depressants, Sedatives, Tranquilizers, Others. Alcohol: Decreases awareness; impairs the body s ability to regulate temperature and increases risk for hypothermia. 15 Factors Increasing Risk of Cold Injuries/Illnesses Caffeine: Increases urine production, contributes to dehydration. Nicotine (Smoking): Increases risk for cold-induced skin injury (such as frostbite, immersion foot); promotes development of peripheral vascular disease. Wearing tight clothing: Restricts circulation. Under-activity: Can lead to decreased body heat production. Over-activity: Can lead to wet skin, clothing, or shoes from sweating. Under-dressing: Exposed fingers, nose, ears; uncovered head. Over-dressing: Can result in wet skin and clothing from sweating. Length of exposure. Age: Older adults may be at more risk than younger. Dehydration: Causes body s natural defense mechanisms to fail and person becomes more susceptible to cold injuries. 16 (510) 651-8289 8

Injuries/Illnesses from Cold Exposure Working in freezing conditions or under prolonged exposures to temperatures above freezing, along with other factors, can cause cold-related injuries and illnesses, tissue damage, possible amputation, or death. Hypothermia is a serious medical emergency. Frostbite, frostnip, chilblains, and immersion injury most commonly affect the extremities - toes, fingers, ears, nose. 17 Injury/Illness Hypothermia Frostbite Frostnip Chilblainsi Immersion injury (Trench foot) Injuries/Illnesses from Cold Exposure Cause Occurs when core body temperature decreases to below 95 F; can occur in air temperatures below or above freezing (or water temperatures ; serious medical emergency, can be fatal. Ice crystal formation in skin and other tissues of the body at or below freezing (32 F); causes permanent damage and destruction to blood vessels and other structures, can result in amputation. Ice crystal formation only in the very outer layer of the skin; causes no permanent damage. Mild cold injury due to prolonged and repeated exposure for several hours to temperatures above freezing (32 F to 60 F); affected skin is swollen, red, tingly, painful, and itchy. Exposure of wet feet (or hands, other body areas) to cold temperatures over hours to days at or above freezing (32 F to 50 F); damages nerves and muscles; can cause permanent damage. The module Cold-related Injuries and Illnesses covers these topics at greater depth. 18 (510) 651-8289 9

Preventive Measures Planning: Plan for work in cold weather and implement controls to reduce and minimize exposure and the risk of cold stress. Planning for the conditions. Engineering g controls. Work practices. Appropriate clothing. Personal protective equipment. Training: Provide training in the recognition and treatment of coldrelated injuries and illnesses. Supervisors, workers, and co-workers should watch for signs of cold stress and allow workers to interrupt their work if they are extremely uncomfortable. Awareness: Being aware of how your body is reacting to the cold is important in preventing cold stress. 19 Planning Monitor temperatures and air movement Indoors: Take readings of temperature and air movement in all cold work areas at the start, middle, and end of each shift, at least every four hours. Outdoors: The weather report can be used. Postpone work to a warmer day. Schedule heavy work during the warmer parts of the day if possible. Where there is air movement from wind, ventilation, or travel in an open vehicle like a forklift, use the wind chill index to evaluate the hazard rather than the air temperature. The wind chill index takes into account the wind blowing the heat away from the body. If you know the temperature and speed of air movement, the wind chill can be looked up in the wind chill chart. 20 (510) 651-8289 10

Engineering Controls Use radiant heaters, warm air jets, and contact warm plates to warm workers. Shield work areas from drafts or wind to reduce wind chill. Provide heated warming shelters, e.g., tents, cabins, or rest rooms, for continuous work in temperatures below freezing. Cover equipment handles, especially metal handles and bars, with thermal insulating material when temperatures drop below freezing (steel conducts heat away even faster than water). Design machines and tools so that they can be operated without having to remove gloves or mittens. In refrigerated rooms, minimize air speed as much as possible with properly designed air distribution systems. If workers are simultaneously exposed to vibration and/or toxic substances, reduced limits for cold exposure may be necessary. 21 Clothing The following are recommendations to protect your body, hands, feet, and head when working in cold environments: Body: Wear at least three layers of loose-fitting clothing to trap air and provide insulation, and allow better ventilation. 1. Inner wicking layer made from polyester, polypropylene, or other synthetic material that draws moisture away from the skin and helps keep it dry. 2. Middle insulating layer made of wool, down, fleece, or other material with loft that will hold the body s heat. 3. Outer layer for wind and water protection, made of breathable waterproof fabric that allows some ventilation (like Gortex or nylon) and is windproof, and that may also need to be resistant to oil, fire, chemicals, or abrasion. Any additional layer(s) of clothing should be large enough not to compress the inner layers and decrease the insulation properties. 22 (510) 651-8289 11

Head: Clothing Wear a wool knit cap or a liner under a hard hat to reduce excessive heat loss. A mask also helps protect the cheeks and nose. Up to 40% of body heat can be lost when the head is left exposed. 23 Clothing Hands: Wear gloves and mittens to prevent cold-related injuries as well as prevent accidents and maintain dexterity. The ACGIH* recommends wearing gloves when the air temperature is: below 60.8 F for sedentary work. below 39.2 F for light work. below 19.4 F for moderate work. below 0 F, wear mittens, which protect better than gloves. Use glove/mitten liners for extra protection. Use fingerless gloves with mittens for work requiring dexterity. * The American Conference of Governmental Industrial Hygienists 24 (510) 651-8289 12

Clothing Feet: Wear insulated boots with removable felt liners; remove liners daily for complete drying. Leather mukluk or pack type boots are porous, allowing the boots to "breathe" and letting perspiration evaporate. If work involves standing in water or slush (e.g., fire fighting, farming), boots must be waterproof. If there are crushing hazards, boots must be steel-toed. Wear warm thick socks. If you wear two pairs of socks, inner liner socks made of polypropylene will help keep feet dry and warmer (silk, nylon, or thin wool will work also). Outer thicker socks should be larger so inner socks are not compressed. 25 Clothing (Socks, continued) Make sure socks are not too thick; this may result in tightness and loss of insulating properties, and increase the risk for cold injuries. If the socks are too thin, the boots will fit loosely and may lead to blisters. Change socks if they get wet or damp. General Guidelines Keep clothing dry. Remove snow and moisture from clothes prior to entering heated shelters. While resting in a heated area, remove outerwear to allow perspiration to evaporate. Keep extra complete change of dry clothing, shoes, hat, gloves, etc., available in case work clothes become wet. The body loses heat faster if skin is in contact with wet clothing, and will chill rapidly. Excess perspiration will increase heat loss, so remove extra layers of clothing whenever you feel too warm. 26 (510) 651-8289 13

Personal Protective Equipment Face and Eye Protection In extremely cold conditions where face protection is needed, use eye protection that is separate from the nose and mouth to prevent fogging and frosting eye shields or glasses. Wear eye protection appropriate for the work. Wear eye protection that protects against: ultraviolet light from the sun. glare from the snow. blowing snow/ice crystals. high wind chill conditions to protect the corneas of the eyes from potentially freezing. 27 Work Practices Work Practices are important preventive measures. Pace the work to avoid excessive sweating. Change into dry clothes if clothes become wet. New employees should be given enough time to get acclimatized to cold and protective clothing before assuming a full work load. Avoid sitting or standing still for prolonged periods. Take frequent breaks, in shielded areas out of the cold, to avoid fatigue since energy is needed to keep muscles warm. Work in pairs to keep an eye on each other and watch for signs of cold stress. Consume warm, high calorie food such as pasta to maintain energy reserves. Working in the cold requires more energy to maintain body heat. 28 (510) 651-8289 14

Work Practices Drink plenty of warm liquids often, especially when doing strenuous work, to prevent dehydration. Avoid caffeine, which increases urine production and contributes to dehydration. Avoid alcohol. When it is cold, do not brush up against metal surfaces with bare skin. The skin may stick to it and get immediate frostbite. Greases and oils get thick and hard which makes equipment difficult to use. Follow the proper procedures and use the right tools. Tools also get brittle in the cold, so use caution when working with them. Avoid skin contact when handling evaporative liquids (gasoline, alcohol, cleaning fluids) while de-icing and fueling below 40 F. These materials in contact with the skin greatly increase heat loss from the body. 29 Work Practices American Conference of Governmental Industrial Hygienists (ACGIH) Recommended Guidelines The following slide shows the ACGIH s recommendations for working in cold conditions. The exposure times are based on the wind chill factor. The work/break schedule applies to any four-hour period with moderate or heavy activity. The warm-up break periods are of 10 minute duration in a warm location. The schedule assumes that "normal breaks" are taken once every two hours. At the end of a 4-hour period, an extended break (e.g. lunch break) in a warm location is recommended. More information is available in the ACGIH publications "2000 TLVs and BEIs" and "Documentation of TLVs and BEIs." 30 (510) 651-8289 15

Air Temperature - Sunny Sky C (approx) -26 to - 28-29 to -31-32 to - 34-35 to - 37 TLVs Work/Warm-up Schedule for Outside Workers based on a Four-Hour Shift* F (approx) ACGIH Recommended Guidelines No Noticeable Wind Max. work Period No. of Breaks ** 5 mph Wind 10 mph Wind 15 mph Wind 20 mph Wind Max. Work Period No. of Breaks -15 to - (Norm breaks) 1 (Norm breaks) 1 19-20 to -24 (Norm breaks) 1 75 2-25 to -29-30 to - 34-38 -35 to - to - 39 39 75 55 2 3 55 40 40 30 4 3 4 5 Max. Work Period 75 55 40 30 No. of Breaks 2 3 4 5 Max. Work Period 55 40 30 No. of Breaks 3 4 5 Non-emergency work should cease Max. Work Period 40 30 No. of Breaks 4 5 Non-emergency work should cease -40-40 to 30 Non-emergency to - 5 work should -44 42 Non-emergency cease work should Table -43 applies Non-emergency & -45 only & if workers are wearing cease dry clothing and doing moderate to heavy work work should activity. below For below light to moderate cease work activity, move down one line to decrease maximum work period and increase the number of breaks. *2007 TLVs and BEIs - Threshold Limit Values for Chemical Substances and Physical Agents and Biological Exposure Indices. Copyright Cincinnati 2015 : American Du-All Conference Safety, LLC, of du-all.com, Governmental (510) Industrial 651-8289 Hygienists (ACGIH), 2007 p. 202 31 Training Training in recognition and treatment is important. Educate supervisors and workers on: symptoms of cold related disorders, and signs of cold stress to watch for; proper clothing habits; safe work practices; physical fitness requirements for work in cold; emergency procedures in case of cold injury. Allow workers to interrupt their work if they are extremely uncomfortable. Supervisors should also ensure that work schedules allow appropriate rest periods. All of these measures should be incorporated into the relevant health and safety plans. 32 (510) 651-8289 16

Questions Class: Working in Cold Environments. Instructor: Sean Halpin Contact: (510) 651-8289; www.du-all.com Fax Sign-In Sheet to (510) 651-8937 or safety@du-all.com 33 (510) 651-8289 17