Pasig city Tel: 654-13-42 MET-101 Introduction to Metrology This 2-day course offers a basic introduction into Metrology, meant for people who are working in calibration and testing labs, maintenance services or metrological departments and as a reviewer for those who are planning to take the QualiMets Certified Calibration Technician Examination. In two days the participant will get acquainted with: - general metrology - measurement systems - calibration systems - quality systems and standards. Lectures, discussion and practical exercises. None Training Investment: PhP 10,000.00, inclusive of Date: February 28 March 1, 2014 Time: 8 am - 5 pm METROLOGY 101 - Introduction to Metrology GENERAL METROLOGY SI Units and Fundamental Constants in Metrology Introduction to Measurement Concepts MEASUREMENT SYSTEMS Basic Measurement Concepts Inspection, Measuring and Test Equipment (IMTE) Specifications CALIBRATION SYSTEMS Introduction to Laboratory Standard Calibration Procedure Calibration Personnel Roles and Responsibilities Calibration Interval Presentation of Measurement Data QUALITY SYSTEMS AND STANDARDS Flow Chart and Process Map Hazard Communication Housekeeping Basic Workplace Safety Quality Control Tools Control Charts
Pasig city Tel: 654-13-42 MET-102 Guide to the Expression Uncertainty in Measurement This 1-day course offers a basic introduction into uncertainty of measurement, meant for people who are working in calibration and testing labs, maintenance services or metrological departments and as a refresher for those who are planning to take the QualiMets Certified Calibration Technician Examination. Learn the practical approach to measuring uncertainty. Understand the steps required and the accepted practices needed for accredited laboratories. Lectures, discussion and practical exercises. Email: labindustries@yahoo.com.ph MET 101 Introduction to Metrology Training Investment: PhP 8,000.00, inclusive of Date: March 22, 2014 Time: 8 am - 5 pm METROLOGY 102 - Guide to the Expression of Uncertainty in Measurement APPLIED MATHEMATICS FOR CALIBRATION TECHNICIAN APPLIED STATISTICS FOR CALIBRATION TECHNICIAN ESTIMATION OF UNCERTAINTY OF MEASUREMENT BASED ON ISO GUIDE TO UNCERTAINTY IN MEASUREMENT Determine what factors should be considered when creating an uncertainty budget. Factors affecting Measurement Understand the way to statistically model budgets and distributions. Review uncertainty budgets. Examine international practices and practical statistics. Review and calculate specific examples for measurement uncertainty. Note: Delegates are required to bring their own scientific calculator
Pasig city Tel: 654-13-42 MET-103 Understanding, Documenting and Auditing for the Requirements of ISO 17025:2005 This 1-day course is meant for people who are working in calibration and testing labs, maintenance services or metrological departments, as a refresher for those who are planning to take the QualiMets Certified Calibration Technician Examination, laboratory staff and other laboratory personnel who plan to set up their quality system to conform to international standards or who are planning to secure ISO 17025:2005 Accreditation. Lectures, discussion and practical exercises. None Training Investment: PhP 5,000.00, inclusive of Date: March 7, 2014 Time: 8 am - 5 pm METROLOGY 103 - Understanding, Documenting and Auditing for the Requirements of ISO 17025:2005 Backgrounder on ISO 17025:2005 Definition of Important Terms Management Requirements (15 Elements) with highlights on: 3.1 Management System 3.2 Document and Record Control 3.3 Corrective and Preventive Action 3.4 Internal Audit Technical Requirements (10 Elements) with detailed discussion on: 4.1 Quality Assurance Procedures 4.2 Proficiency Testing 4.3 Method Validation 4.4 Equipment Management and Calibration 4.5 Uncertainty in Measurement Documenting for ISO 17025:2005 Auditing Procedure for ISO 17025:2005
Pasig city Tel: 654-13-42 MET-104 Training on Temperature Calibration This Temperature calibration training module is designed to meet ISO quality management system requirement include ISO 9001, ISO14001, ISO/TS 16949, ISO 22000, ISO/IEC17025, GMP, HACCP and other quality management systems. This module includes the evaluation of measurement uncertainty base on ISO Guide to the expression of uncertainty in measurement (GUM). Training Investment: PhP 12,000.00 inclusive of Date: April 4-5, 2014 Time: 8 am - 5 pm METROLOGY 104 - Training on Temperature Calibration Differences between various principles of thermoelectricity and resistance thermometry. Various types of thermocouples for example types K, N, T, S, J, R and their applications. Understand resistance thermometer for example PT100 and its input terminals. Step by step procedure based on ASTM E644-06 and ASTM E564-02 through comparison technique. Step by step procedure based on EURAMET cg-20 by electrical simulation of temperature indicator, recorder. Step by step procedure based on DKD R-57 for the calibration of temperature controlled enclosure. Hands on practice. Estimate uncertainty in measurement base on ISO Guide. Chemist, Engineer, Signatories of test reports & certificates, Laboratories Personnel and as a refresher for those who are planning to take the QualiMets Certified Calibration Technician Examination.
Pasig city Tel: 654-13-42 MET-105 Training on Calibration of Non-automatic Weighing Instrument The course provides participants with the knowledge and skills: -to understand the principles of calibration of weighing instrument -to identify various sources of error that affect the calibration of weighing instrument. Training Investment: PhP 7,000.00, inclusive of Date: May 31, 2014 Time: 8 am - 5 pm METROLOGY 105 - Training on Calibration of Non- Automatic Weighing Instrument General Principles of Mass Measurement Air Buoyancy and Conventional Mass Effects of the Laboratory Environment Care and handling of weights Calibration of Electronic balances Balance adjustment features Reporting Calibration data Step by step procedure based on EURAMET cg-18 for the calibration of Non-Automatic Weighing Instrument. Hands on practice. Estimate uncertainty in measurement base on ISO Guide. Chemist, Engineer, Signatories of test reports & certificates, Laboratories Personnel and as a refresher for those who are planning to take the QualiMets Certified Calibration Technician Examination.
Pasig city Tel: 654-13-42 MET-106 Training on Calibration of Micrometer and Caliper Participants is anticipated to acquire knowledge in caliper and micrometer calibration both digital and analog readout. JIS B7507 is adopted for the calibration of calliper and JIS B 7502 for micrometer. This module includes the evaluation of measurement uncertainty base on ISO Guide to the expression of uncertainty in measurement (GUM). Training Investment: PhP 7,000.00, inclusive of Date: July 5, 2014 Time: 8 am - 5 pm METROLOGY 106- Training on Calibration of Micrometer and Caliper Dimensional Standards (Gage Blocks: Style, Type, Class, Uses) Wringing Calibration Gage Block Usage and Handling Gage Block Selection Hands on Calibration Methods of (using supplied master Gage Blocks.) Micrometer and Caliper At the end of the course, participants are expected to: - Acquire basic knowledge in using caliper and micrometer both digital and analog - Perform calibration independently - Perform necessary calculations include uncertainty estimation based on ISO Guide. *according to the model given only+ - Able to generate ISO quality management system accepted calibration report Chemist, Engineer, Signatories of test reports & certificates, Laboratories Personnel and as a refresher for those who are planning to take the QualiMets Certified Calibration Technician Examination.
Pasig city Tel: 654-13-42 MET-107 Training on Calibration of Pressure Measuring Instrument The course provide participants with the knowledge and skills: to understand the principles of operation of a variety of pressure measuring instruments, to understand the processes involved in the use and calibration of pressure equipment, to identify the various sources of error that affect pressure measurements. Training Investment: PhP 7,000.00, inclusive of Date: June 7, 2014 Time: 8 am - 5 pm METROLOGY 107 Training on Calibration of Pressure Measuring Instrument Introduction Definition of Pressure Measurement Instrument Terminology Gravitational Forces Mass and Density The Mercury Manometer Pressure Units of Measure Gauge, Absolute, and Differential Pressure Generating a Known Pressure Pressure from a Piston Dead Weight Testers Pressure Measurement Instrumentation The Mercury Manometer Revisited Gauge Pressure Measurement Differential Pressure Measurement Aneroid Barometers/Manometers Pressure Measurement Films Other Types of Pressure Measurement Instrumentation Vacuum Gauges The Pirani Gauge Ionization Gauges Safety Issues Hazardous Materials (such as mercury) Physical Hazards Electrical Hazards Calibration of Pressure Instrument At the end of the course, participants are expected to: - Acquire basic knowledge in calibration of pressure gauge both hydraulic and pneumatic - Perform necessary calculations include uncertainty estimation based on ISO Guide. - Able to generate ISO quality management system accepted calibration report Chemist, Engineer, Signatories of test reports & certificates, Laboratories Personnel and as a refresher for those who are planning to take the QualiMets Certified Calibration Technician Examination.
Pasig city Tel: 654-13-42 MET-108 Training on Calibration of Multimeter This calibration training module is designed to meet ISO quality management system requirement include ISO 9001, ISO14001, ISO/ TS 16949, ISO/IEC 17025 and other quality management systems requiring multimeter calibration. Participant is anticipated to acquire knowledge and have hands on practical experience in multimeter calibration according to EURAMET-cg15. Email:labindustriesyahoo.com.ph Training Investment: PhP 10,000.00, inclusive of meals, training materials and training certificates. Date: May 10, 2014 Time: 8 am - 5 pm METROLOGY 108 Training on Calibration of Multimeter Calibration of Digital Multimeter with differences ranges Standard used Environment condition Pre calibration inspection Calibration procedure DC voltage calibration AC voltage calibration Resistance calibration DC current calibration AC current calibration Measurement uncertainty calculation At the end of the course, participants are expected to: - Acquire basic knowledge in calibration of Multimeter - Perform necessary calculations include uncertainty estimation based on ISO Guide. - Able to generate ISO quality management system accepted calibration report Chemist, Engineer, Signatories of test reports & certificates, Laboratories Personnel and as a refresher for those who are planning to take the QualiMets Certified Calibration Technician Examination.
Pasig city Tel: 654-13-42 MET-109 Training on Calibration of Volumetric Glassware This calibration training module is designed to meet ISO quality management system requirement include ISO 9001, ISO14001, ISO/TS 16949, ISO 22000, ISO/IEC 17025, GMP, HACCP and other quality management systems. Participant is anticipated to acquire knowledge in calibrating volumetric glassware, micro pipette, burette according to ISO/TR 20461. This module includes the evaluation of measurement uncertainty base on ISO Guide to the expression of uncertainty in measurement (GUM). Training Investment: PhP 7,000.00 inclusive of meals, training materials and training certificates. Date: March 14, 2014 Time: 8 am - 5 pm METROLOGY 109 Training on Calibration of Volumetric Glassware Calibration of volumetric glassware by weighing the quantity of water delivered:- Basis of test (ISO/TR 20461 (2000) Environment condition Material and apparatus use Calibration procedure Correct method of handling & maintenance Measurement uncertainty evaluation At the end of the course, participants are expected to: - Acquire basic knowledge in calibration of Volumetric glasswares - Perform necessary calculations include uncertainty estimation based on ISO Guide. - Able to generate ISO quality management system accepted calibration report Chemist, Engineer, Signatories of test reports & certificates, Laboratories Personnel and as a refresher for those who are planning to take the QualiMets Certified Calibration Technician Examination.