Technical Data - Pressure osses profi-air Heat-recovery ventilation DRAINAGE SYSTEMS EECTRICA SYSTEMS BUIDING TECHNOOGY INDUSTRIA PIPES
Table of Contents profi-air refreshingly easy... profi-air pipe types profi-air tunnel pipe 3 profi-air classic pipe 4 profi-air fittings profi-air tunnel fittings 5 13 profi-air distributors profi-air distributors / distributor accessories 14 17 profi-air accessories profi-air iso pipe 18 19 profi-air external wall grill 2 profi-air roof hood 21 profi-air valves / ventilation grills 22 26 2 FRÄNKISCHE profi-air technical data
Technical data sheet profi-air tunnel pipe Tunnel-shaped, crush-resistant, double-walled corrugated pipe with antistatic and antibacterial inside coating, to be installed in the insulation layer, for routing cabels in suspended ceilings, installation walls, risers or frames. The smooth inner surface of the profi-air tunnel pipe allows for easy cleaning and enables high flow rates. A profi-air sealing and connection element is used to connect to the profi-air tunnel pipe or a fitting. In addition, the connection can be secured by using a mounting clamp. Delivered coiled and sealed with pipe plugs. Admissible operating temperature: -25 to 6 C 2m W H n flat, flexible crush-resistant design n min. 6cm horizontal bend radius n smooth, antistatic and antibacterial inside coating n high flow rates of max. 45m³/h n air distribution system made entirely of PE profi-air tunnel pipe in coils W H Coil ø Coil height mm mm mm mm kg/coil 7831322 132x52 mm 132 52 12 15 PE-HD 1.5 2 m 5. 4.5 4. 3.5 3. 2.5 2. 1.5 1..5 15 2 25 3 35 4 45 5 55 6 max 45 m 3 /h FRÄNKISCHE profi-air technical data 3
Technical data sheet profi-air classic pipe Highly flexible double-walled corrugated pipe with antistatic and antibacterial internal coating, to be installed in concrete ceilings, suspended ceilings, installation walls, risers or frames. The profi-air classic pipe with its smooth inner pipe surface allows easy cleaning. A profi-air profile sealing ring that is mounted onto the second rib of the corrugations of the profi-air classic pipe is used to connect to the profi-air classic pipe or a fitting. Admissible operating temperature: -25 to 6 C n highly flexible and durable D i D o n min. 15 cm horizontal bend radius 2m / 5m n antistatic and antibacterial inside coating n smooth inner surface for easy cleaning n air distribution system made entirely of PE n hygienic transport - end plug and individual packing profi-air classic pipe in coils D o / D i Coil ø Coil height mm mm mm kg/coil 7837532 NW 75 76 / 63 15 21 PE-HD 6.8 2m 7837535 NW 75 76 / 63 11 35 PE-HD 17. 5m 783932 NW 9 91 / 78 113 25 PE-HD 9. 2m 1 9 7837532/35 783932 8 7 6 5 4 3 2 1 max 3 m 3 /h max 45 m 3 /h 15 2 25 3 35 4 45 5 55 6 4 FRÄNKISCHE profi-air technical data
Technical data sheet profi-air tunnel 9 vertical bend 9 degree bend to vertically redirect air flow without being obstructed by edges to easily, quickly and without tension connect the profi-air tunnel pipe system. A profi-air sealing and connection element is used to connect to the profi-air tunnel pipe or a fitting. In addition, the connection can be secured by using a mounting clamp. H n flat design provides space-saving redirection n direct connection of two fittings possible n flow-optimised design n air distribution system made entirely of PE n hygienic individual packing W profi-air tunnel 9 vertical bend W H mm mm mm kg/pc. pc. 7831324 132 x 52mm 87 132 52 PE-HD.64 1 4. 3.5 * 3. 2.5 2. 1.5 1..5 15 2 25 3 35 4 45 5 55 6 *Including profi-air sealing and connection element, Part. No. 7831321 FRÄNKISCHE profi-air technical data 5
Technical data sheet profi-air tunnel 9 horizontal bend 9 degree bend to horizontally redirect air flow without being obstructed by edges to easily, quickly and without tension connect the profi-air tunnel pipe system. A profi-air sealing and connection element is used to connect to the profi-air tunnel pipe or a fitting. In addition, the connection can be secured by using a mounting clamp. H n flat design provides space-saving redirection n direct connection of two fittings possible n flow-optimised design n air distribution system made entirely of PE n hygienic individual packing W profi-air tunnel 9 horizontal bend W H mm mm mm kg/pc. pc. 78313241 132 x 52mm 185 132 52 PE-HD.19 1 4. 3.5 * 3. 2.5 2. 1.5 1..5 15 2 25 3 35 4 45 5 55 6 *Including profi-air sealing and connection element, Part. No. 7831321 6 FRÄNKISCHE profi-air technical data
Technical data sheet profi-air tunnel 9 air outlet H 3 W H 2 9 degree air outlet housing to connect to a valve. Can be universally used for supply air or extract air. Optional filters for extract air are available. Can be installed in walls, floors or ceilings. Can be mounted by using fastening lugs. A profi-air sealing and connection element is used to connect to the profi-air tunnel pipe or a fitting. In addition, the connection can be secured by using a mounting clamp. H H 1 n flexible use in walls, floors and ceilings n direct connection of two fittings possible n flow-optimised design n fastening lugs at the module D i n air distribution system made entirely of PE D o n hygienic individual packing profi-air tunnel 9 air outlet for valve Ø125mm D i D o W H / H 1 / H 2 / H 3 mm mm mm mm mm kg/pc. pc. 7831328 132 x 52mm 125 133 188,5 132 483 / 32 / 79 / 52 PE-HD.423 1 5. 4.5 4. 3.5 * 3. 2.5 2. 1.5 1..5 15 2 25 3 35 4 45 5 55 6 *Including profi-air sealing and connection element, Part. No. 7831321 FRÄNKISCHE profi-air technical data 7
Technical data sheet profi-air tunnel straight air outlet Straight air outlet housing to connect ti a valve. Can be universally used for supply air or extract air. Optional filters for extract air are available. Can be installed in walls or ceilings. A profi-air sealing and connection element is used to connect to the profi-air tunnel pipe or a fitting. In addition, the connection can be secured by using a mounting clamp. n flexible use in walls or ceilings 1 2 n direct connection of two fittings possible n flow-optimised design H D o D i n air distribution system made entirely of PE n hygienic individual packing W profi-air tunnel straight air outlet for valve Ø125mm D i / D o W H / 1 / 2 mm mm mm mm kg/pc. pc. 78313281 132 x 52mm 125 / 133 132 52 385 / 195 / 13 PE-HD.293 1 3. * 2.5 2. 1.5 1..5 15 2 25 3 35 4 45 5 55 6 *Including profi-air sealing and connection element, Part. No. 7831321 8 FRÄNKISCHE profi-air technical data
Technical data sheet profi-air tunnel 9 air outlet 9 degree air outlet housing to cover grills. Can be universally used for supply air or extract air. Can be installed in walls or floors. Can be mounted by using fastening lugs. A profi-air sealing and connection element is used to connect to the profi-air tunnel pipe or a fitting. In addition, the connection can be secured by using a mounting clamp. H 1 2 1 W 1 H 2 n flexible use in walls and floors n direct connection of two fittings possible n flow-optimised design n fastening lugs at the module n air distribution system made entirely of PE n hygienic individual packing H 3 3 W 2 profi-air tunnel 9 air outlet for profi-air ventilation grills 78364/783645 1 / 2 / 3 W 1 / W 2 H 1 / H 2 / H 3 mm mm mm kg/pc. pc. 78313285 132 x 52mm 84.5 / 89 / 269 35 / 39 254 / 174 / 8 PE-HD.62 1 8. 7. * 6. 5. 4. 3. 2. 1. 15 2 25 3 35 4 45 5 55 6 *Including profi-air sealing and connection element, Part. No. 7831321 FRÄNKISCHE profi-air technical data 9
Technical data sheet profi-air classic 9 air outlet H 2 W 9 degree air outlet housing to connect to a valve. Can be universally used for supply air or extract air. Optional filters for extract air are available. Can be installed in walls, floors or ceilings. Can be mounted by using fastening lugs. A profi-air profile sealing ring that is mounted onto the second rib of the corrugations of the profi-air classic pipe is used to connect to the profi-air classic pipe and for simultaneaous sealing. H 1 H n flexible use in walls, floors and ceilings n flow-optimised design n fastening lugs at the module n air distribution system made entirely of PE n hygienic individual packing D i D o profi-air classic 9 air outlet for one valve Ø125mm D i / D o W H / H 1 / H 2 mm mm mm mm kg/pc. pc. 7837538 2x NW 75 125 / 133 217 18 464 / 285 / 95 PE-HD.56 1 12 1 8 6 4 2 15 2 25 3 35 4 45 5 55 6 1 FRÄNKISCHE profi-air technical data
Technical data sheet profi-air straight adaptor Straight adaptor to quickly and easily connect profi-air tunnel pipes and fittings to profi-air classic fittings. A profi-air profile sealing ring is used to connect to the profi-air classic fitting. A profi-air sealing and connection element is used to connect to the profi-air tunnel pipe or a fitting. In addition, the connection can be secured by using a mounting clamp. NW NW n direct connection of round pipes and tunnel pipes n flow-optimised design n air distribution system made entirely of PE n hygienic individual packing W H profi-air straight adaptor profi-air classic to profi-air tunnel W H NW mm mm mm kg/pc. pc. 78313225 132 x 52mm NW 9 147 132 52 9 PE-HD.89 1 1.6 1.4 * 1.2 1..8.6.4.2 15 2 25 3 35 4 45 5 55 6 *Including profi-air sealing and connection element, cat. no. 7831321 FRÄNKISCHE profi-air technical data 11
Technical data sheet profi-air straight adaptor Straight adaptor to quickly and easily connect profi-air tunnel pipes and fittings to profi-air classic fittings. A profi-air profile sealing ring is used to connect to the profi-air classic fitting. A profi-air sealing and connection element is used to connect to the profi-air tunnel pipe or a fitting. In addition, the connection can be secured by using a mounting clamp. NW NW n direct connection of round pipes and tunnel pipes n flow-optimised design n air distribution system made entirely of PE n hygienic individual packing B H profi-air straight adaptor profi-air classic to profi-air tunnel B H NW mm mm mm kg/pc. pc. 78313224 132 x 52 mm/nw 9 162 132 52 9 PE-HD,94 1 1.6 1.4 1.2 1..8.6.4.2 15 2 25 3 35 4 45 5 55 6 *Including profi-air sealing and connection element, cat. no. 7831321 12 FRÄNKISCHE profi-air technical data
Technical data sheet profi-air 9 adaptor 9 degree adaptor to quickly and easily connect profi-air tunnel pipes and fittings to a profi-air classic pipe. A profi-air profile sealing ring is used to connect to the profi-air classic pipe. A profi-air sealing and connection element is used to connect to the profi-air tunnel pipe or a fitting. In addition, the connection can be secured by using a mounting clamp. H 2 NW H 2 n direct connection of round pipes and tunnel pipes n flow-optimised design n air distribution system made entirely of PE n hygienic individual packing H 1 W profi-air 9 adaptor profi-air classic to profi-air tunnel W H 1 / H 2 NW mm mm mm kg/pc. pc. 78313226 132 x 52mm/NW 75 138 132 52 / 147 75 PE-HD.18 1 78313227 132 x 52mm/NW 9 148 132 52 / 163 9 PE-HD.125 1 16 14 78313226 [NW75] 78313227 [NW9] * 12 1 8 6 4 2 15 2 25 3 35 4 45 5 55 6 *Including profi-air sealing and connection element, cat. no. 7831321 FRÄNKISCHE profi-air technical data 13
Technical data sheet profi-air classic 9 bend 9 degree bend to horizontally/vertically redirect air flow to easily, quickly and without tension connect the profiair classic pipe system. A profi-air profile sealing ring that is mounted onto the second rib of the corrugations of the profi-air classic pipe is used to seal. NW n fittings to directly connect to the profi-air classic pipe n small 6 mm radius n flow-optimised design n air distribution system made entirely of PE n hygienic individual packing NW profi-air classic 9 bend NW mm kg/pc. pc. 7837534 NW 75 173 75 PE-HD.113 1 783934 NW 9 197 9 PE-HD.152 1 16 14 7837534 [NW75] 783934 [NW9] 12 1 8 6 4 2 15 2 25 3 35 4 45 5 55 6 14 FRÄNKISCHE profi-air technical data
Technical data sheet profi-air classic distributor 2 NW W Distribution box, can be used for supply air or extract air, including four mounting angles. Distribution plate can be mounted flexibly, for straight or 9 distribution, inside sound insulation coating and two lateral inspection openings for inspection and cleaning. Constant airflow regulators can be optionnally used in the distributor outlets. 1 D W n flexible use, low height n no cross talk sound attenuation needed thanks to star-shaped installation and sound insulation n two wide inspection openings n constant airflow regulators can be used profi-air classic distributor NW W 1 2 D mm mm mm mm mm kg/pc. pc. 783165 Distributor, 5-fold DN 16 16 327 354 311 225 steel 4.6 1 783161 Distributor, 1-fold DN 16 16 63 365 321 216 steel 6.8 1 7831815 Distributor, 15-fold DN 18 18 565 489 41 297 steel 9.1 1 1 9 8 7 6 5 4 3 2 1 5 1 15 2 25 3 35 4 45 5 55 6 65 Straight 783165 783161 7831815 1 9 8 7 6 5 4 3 2 1 5 1 15 2 25 3 35 4 45 5 55 6 65 9 783165 783161 7831815 *Inclusive profi-air manifold coupling FRÄNKISCHE profi-air technical data 15
Technical data sheet profi-air classic constant airflow regulator Self-regulating, constant airflow regulator for the profi-air classic distributor, with a wear-free control element in a plastic housing, silicone membrane and a recoil spring to be directly installed in the profi-air classic distributor connection coupling. Automatic, maintenance-free airflow regulation independent from the position, no auxiliary energy needed. Applicable in: 7837532 / 783932 D n self-acting regulating element n reduces start-up time n suited for all profi-air classic distributors n optional self-intensifing element for intensive ventilation profi-air constant airflow regulator D mm mm kg/pc. pc. 78315 15m 3 /h 8 75 PP/silicone.15 1 7832 2m 3 /h 8 75 PP/silicone.15 1 78325 25m 3 /h 8 75 PP/silicone.15 1 7833 3m 3 /h 8 75 PP/silicone.15 1 78335 35m 3 /h 8 75 PP/silicone.15 1 7834 4m 3 /h 8 75 PP/silicone.15 1 78345 45m 3 /h 8 75 PP/silicone.15 1 7835 5m 3 /h 8 75 PP/silicone.15 1 6 5 4 3 2 1 7835 78345 7834 78335 7833 78325 7832 78315 25 5 75 1 125 15 175 2 16 FRÄNKISCHE profi-air technical data
Technical data sheet profi-air classic self-intensifying element Self-intensifying element for the profiair classic distributor with variable flow rate. Applicable in: 7837532 / 783932 n suited for all profi-air classic distributors n intensive ventilation possible in spite of constant airflow regulator D profi-air self-intensifying element D mm mm kg/pc. pc. 7831 Ø 8mm 8 54 PP.1 1 2 18 16 14 12 1 8 6 4 2 5 1 15 2 25 3 35 4 45 5 55 6 65 7 FRÄNKISCHE profi-air technical data 17
Technical data sheet profi-air tunnel regulating element Regulating element to compensate for the pressure loss in the air distribution system. Regulated through various clear cross sections. The regulating element can be installed in any profiair tunnel sealing and connecting element. W n suited for any profi-air sealing and connecting element n flexible use n hygienic individual packing H W profi-air tunnel regulating element W H mm mm mm kg/pc. pc. 78313299 132 x 52mm 117 35,4 2 PP.14 1 12 1 8 6 4 1 2 3 4 4a 3a 2a 1a 1 opening 1 or 1a 1 opening 4 or 4a 2 openings 1 and 1a 2 openings 2 and 2a 2 openings 3 and 3a 4 openings 1, 2 and 1a, 2a 4 openings 3, 4 and 3a, 4a 6 openings 1, 2, 3 and 1a, 2a, 3a 6 openings 2, 3, 4 and 2a, 3a, 4a all open 2 5 1 15 2 25 3 35 4 45 5 55 6 18 FRÄNKISCHE profi-air technical data
Technical data sheet profi-air iso pipe 2 Iso pipe as a completely insulated and vapour-tight pipe made of extremely light-weight EPP including an iso pipe coupling for quick and easy connection. Profi-air iso pipes are suited for external, exhaust, supply and extraction air. The elements are push-fit, the iso pipe can be cut to custom length. Admissible operating temperature: -25 to 8 C Heat conduction:.42w/mk D 2 D 1 D 3 D 2 D 1 D 3 n completely insulated vapour-tight pipe system n easy and quick installation 1 n standard diameter DN 16 / DN 18 allows for connecting devices to the element without using adaptors n low weight profi-air iso pipe with coupling D 1 D 2 D 3 1 / 2 mm mm mm mm kg/pc. pc. 7831611 Iso pipe DN 16 x 1mm 16 19 22 1 / 8 EPP.5 4 7831811 Iso pipe DN 18 x 1mm 18 21 24 1 / 8 EPP.55 3 6 5 7831611 7831811 4 3 2 1 5 1 15 2 25 3 35 4 45 5 55 6 FRÄNKISCHE profi-air technical data 19
Technical data sheet profi-air iso pipe 9 bend 1 2 Iso pipe bend as a completely insulated and vapour-tight pipe made of extremely light-weight EPP including iso pipe coupling for quick and easy connections. Profi-air iso pipes are suited for external, exhaust, supply and extraction air. All elements are push-fit, the iso pripe bend can be divided into 2 x 45. Admissible operating temperature: -25 to 8 C Heat conduction:.42w/mk D 2 D 1 D 3 D 1 D 2 D 3 n completely insulated vapour-tight pipe system n easy and quick installation n standard diameter DN 16 / DN 18 allows for connecting devices to the element without using adaptors n low weight profi-air iso pipe 9 bend with coupling D 1 D 2 D 3 1 / 2 mm mm mm mm kg/pc. pc. 7831614 Iso pipe 9 bend DN 16 16 19 22 2 / 8 EPP.28 1 7831814 Iso pipe 9 bend DN 18 18 21 24 215 / 8 EPP.3 1 8 7 7831614 7831814 6 5 4 3 2 1 5 1 15 2 25 3 35 4 45 5 55 6 2 FRÄNKISCHE profi-air technical data
Technical data sheet profi-air exterior wall grill External wall grill made of stainless steel to be installed in walls with pipe connection, including fastening material. Can be used for incoming outside air or outgoing air. Easy fastening thanks to integrated drill holes in the grill frame. H DN n exterior wall grill, made entirely of stainless steel n standard diameter, no adpator necessary B profi-air exterior wall grill W H DN mm mm mm kg/pc. pc. 7831617 DN 16 max. 3m 3 /h 288 2 6 16 stainless steel 1.25 1 7831817 DN 18 max. 4m 3 /h 41 31 6 18 stainless steel 2.4 1 16 14 7831617 7831817 12 1 8 6 4 2 5 1 15 2 25 3 35 4 45 5 55 6 FRÄNKISCHE profi-air technical data 21
Technical data sheet profi-air roof hood 2 D 1 D 2 Roof hood as a completely insulated and vapour-tight roof lead-through with pipe connection, including connection element. Can be used for incoming outside air or outgoing air. Easy installation with the respective profi-air flat-roof lead-through or profi-air lead pan for different roof inclinations. 1 n completely insulated roof leadthrough element n including connecting material between roof hood and iso pipe D 3 3 DN profi-air roof hood, insulated 1 / 2 / 3 D 1 / D 2 / D 3 DN mm mm kg/pc. pc. 78316175 DN 16 max. 3m 3 /h 14 / 365 / 1 298 / 219 / 2 16 steel 2. 1 78318175 DN 18 max. 4m 3 /h 14 / 365 / 1 298 / 219 / 2 18 steel 2.2 1 16 14 12 1 8 6 4 2 5 1 15 2 25 3 35 4 45 5 55 6 78316175 / 78318175 22 FRÄNKISCHE profi-air technical data
Technical data sheet profi-air extract air poppet valve Position s (mm) Extract air poppet valve made of metal, including fitting frame to be installed in any profi-air tunnel and profi-air classic air valve DN 125. Suited for wall and ceiling installations. Regulating device to individually and progressively set the amount of air. T 1 D D 1 D 2 T 1 T T 2 profi-air extract air poppet valve Including fitting frame D / D 1 / D 2 T / T 1 / T 2 mm mm kg/pc. pc. 7831262 DN 125 16 / 124 / 15 85 / 18 / 5 white steel.48 1 3 Position s [mm] -1-5 35 db(a) ΔP t [Pa] 2 1 6 5 4 3 25 db(a) 3 db(a) +5 +1 2 1 5 6 7 1 2 q v [m 3 /h] FRÄNKISCHE profi-air technical data 23
Technical data sheet profi-air supply air poppet valve Position s (mm) Supply air poppet valve made of metal, including fitting frame to be installed in any profi-air tunnel and profi-air classic air valve DN 125. Suited for wall and ceiling installations. Regulating device to individually and progressively set the amount of air. D D 1 D 2 n pre-installed sector plate for any valve n sector plate can be uninstalled easily T 1 T T 2 profi-air supply poppet valve Including fitting frame D / D 1 / D 2 T / T 1 / T 2 mm mm kg/pc. pc. 7831261 DN 125 173 / 124 / 15 76 / 18 / 5 white steel.55 1 without Sector plate with Sector plate ΔP t [Pa] 15 1 6 5 4 3 Position s [mm].2 (m) 2 4 6 9 12 3 3.5 1 2.5 35 db(a) 3 db(a) 25 db(a) ΔP t [Pa] 15 1 6 5 4 3 Position s [mm].2 (m) 2 2.5 4 6 9 12 15 4 3 35 db(a) 3 db(a) 25 db(a) 2 1.5 2 1.5 p1a p1a 1 1 2 3 4 5 2 q v [l/s] 1 8 1 12 2 3 4 5 q v [l/s] 4 5 6 1 2 25 q v [m 3 /h] 3 4 5 6 7 1 15 q v [m 3 /h] 24 FRÄNKISCHE profi-air technical data
Technical data sheet profi-air supply/extract air poppet valve Supply or extract air poppet valve made of metal, including fitting frame to be installed in any profi-air tunnel and profi-air classic air valve DN 125. Suited for wall and ceiling installations. Regulating device to individually and progressively set the amount of air. D T 1 T profi-air supply/extract air poppet valve D T / T 1 mm mm kg/pc. pc. 7831263 DN 125 167 52 / 18 PP white.14 1 Supply air Extraction air q s [m 3 /h] q e [m 3 /h] 3 2 1 2 5 1 2 a = -3 4 9 15 2 25 3 2 1 2 5 1 2 a = -6-4 4 8 12 15 ΔP t [Pa] 1 5 2 25 3 35 4 A db(a) ΔP t [Pa] 1 5 2 25 3 35 2 4 A db(a) 1 2 3 4 5 1 2 5 8 q s [l/s] 1 2 3 4 5 1 2 5 8 q e [l/s] FRÄNKISCHE profi-air technical data 25
Technical data sheet profi-air supply/extract air wall passage H Wall passage for supply or extract air, made of stainless steel, to be used in any profi-air tunnel and profi-air classic air valve DN 125, inlcuding expanded metal filter insert and fastening material. Suited for wall installations. D i W profi-air wall air valve W H D i mm mm mm mm kg/pc. pc. 78312631 DN 125 supply/extract air 21 27 3 123 white steel.61 1 1 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9 1 Without filter Regulator 1% open With pure filter Regulator 1% open With pure filter Regulator 5% open 26 FRÄNKISCHE profi-air technical data
Technical data sheet profi-air ventilation grill - supply/extract air Ventilation grill for supply or extract air, made of stainless steel, including fastening clamps, to be used in profiair tunnel 9 air valve for covering grills. Suited for floor and wall installations. H W 1 H 1 n flexible use in walls and floors n fastening in the exhaust box by using clamps, no screws needed n crush-resistant thanks to integrated braces n hygienic individual packing W profi-air ventilation grill Supply/extraction W / W 1 H / H 1 mm mm kg/pc. pc. 78364 35 x 13mm 345 / 3 127 / 8 stainless steel.46 1 783645 35 x 13mm 345 / 3 127 / 8 white steel.47 1 16 14 12 1 8 6 4 2 15 2 25 3 35 4 45 5 55 6 FRÄNKISCHE profi-air technical data 27
Notes 4.6 Brandschutz FRÄNKISCHE profi-air technical data 28
Rooted in Königsberg globally successful! Our facilities in Europe: Königsberg, Germany (headquarters) Bückeburg, Germay Schwarzheide, Germany Okrisky, Czech Republic St.-eonards-on-Sea, UK Moscow, Russia Yeles/Toledo, Spain Rebstein, Switzerland Torcy-le-Grand, France Ebersbach/Fils, Germany Hermsdorf, Germany Our facilities in Asia: Anting/Shanghai, China Pune, India Our facilities in Africa: Ben Arous, Tunesia Our facilities in North America and Mexico: Anderson, USA Guanajuato, Mexico FRÄNKISCHE is an innovative, growth oriented, medium-sized family-owned enterprise and industry leader in the design, manufacturing and marketing of technically superior corrugated pipe systems for drainage, electrical, building technology and industrial applications. We currently employ about 2,2 people worldwide. Both our many years of experience and expertise in plastics processing, our consulting services and the large array of products are highly valued by our customers. FRÄNKISCHE is a third generation family owned business that was established in 196 and is now run by Otto Kirchner. Today, we are globally represented with production facilities and sales offices. The proximity to our customers enables us to develop products and solutions that are perfectly tailored to our customers needs. Our action and business philosophy focus on our customers and their needs and requirements for our products. FRÄNKISCHE Your partner for sophisticated and technologically advanced solutions. Fränkische Rohrwerke Gebr. Kirchner GmbH & Co. KG 97486 Königsberg/Germany Tel. +49 9525 88-297 Fax +49 9525 88-5 info.gb_h@fraenkische.de www.fraenkische.com www.airfrischendeinfach.de E.2235/1.1.12.4 HT Subject to change without notice Cat. no.79999215