Safety Data Sheet. Section I Product Identification. Section II Hazard Identification

Similar documents
Safety Data Sheet. Section I Product Identification. Section II Hazard Identification

Section I Product Identification. Section II Hazard Identification

Section 3 Physical Data

24 hour Emergency Telephone Contact Number Chauvet

=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION

=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

AIRPORT ROAD EAST STROUDSBURG, PA HEALTH = 2 FLAMMABILITY = 1 REACTIVITY =

MATERIAL SAFETY DATA SHEET C-MUL SUN DRILLING PRODUCTS CORP.

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Safety Data Sheet Bulldog Durex EPDM Rinseable Primer #115

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

All ingredients are on the TSCA inventory or comply with TSCA requirements

MATERIAL SAFETY DATA SHEET

MSDS THE PENRAY COMPANIES, INC.

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Health Flammability 4 Reactivity 0 PRODUCT NAME MAGIC COMPLETE COUNTERTOP AEROSOL MANUFACTURER'S NAME

Health Flammability 2 Reactivity 0 PRODUCT NAME FORMBY S* Build-Up Remover

TESCO Products Inc. Crystal Seal II

Safety Data Sheet. Tuxton Synthetic Gear Oil 75W90

CHAIN GUARD PR-500 SYNTHETIC PROOFER CHAIN LUBRICANT MATERIAL SAFETY DATA SHEET 1. PRODUCT AND COMPANY IDENTIFICATION

Safety Data Sheet. Tuxton Trust Dexron VI

=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Section I: Product and Company Identification Manufactured for: Chauvet

SAFETY DATA SHEET Lead Stop

Health 2* F73L1502 Flammability 0 Reactivity 0 PRODUCT NAME POLANE* W2 Coating, Celestial Blue Xerox

MATERIAL SAFETY DATA SHEET

=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION

=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET CS

MATERIAL SAFETY DATA SHEET General Finishes Corporation. SECTION 2: Composition/Information on Ingredients

SAFETY DATA SHEET SECTION I PRODUCT IDENTIFICATION INGREDIANTS SECTION III HAZARDS IDENTIFICATION

=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION

GAF Safety Data Sheet SDS # 2123 SDS Date: December 2015

Safety Data Sheet. This SDS has been prepared for the purposes of Hazard Communication, under 29 CFR Hazards Identification

MATERIAL SAFETY DATA SHEET WL

CYCLO INDUSTRIES, INC MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET Date Revised: 7/18/2013 Page: 1 Mold Release MSDS Number: SECTION 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Gulf Compressor Synthetic DE Lubricant

Substance key: BBG7080 REVISION DATE: 00/00/0000 Version Print Date: 11/29/2005. Somerville, NJ Telephone No.:

MATERIAL SAFETY DATA SHEET TEMP-BOND NE ( NON-EUGENOL ) ACCELERATOR Temporary Cement

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

SECTION I - PRODUCT AND COMPANY INFORMATION Product Name: A INVISIBLE BLUE PIGMENT

=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET FOR FALK GMAX 6000

MATERIAL SAFETY DATA SHEET

TRIM-TEX, INC W. PRATT AVENUE; LINCOLNWOOD, IL Hour Emergency Phone:

MATERIAL SAFETY DATA SHEET

WARNING: Flammable liquid and vapor.

1. Chemical Product and Company Identification. 2. Hazardous Ingredients. 3. Hazards Identification

MATERIAL SAFETY DATA SHEET. HMIS Hazard Rating: Health: 1 Fire: 1 Reactivity: 0 PPI: C

MATERIAL SAFETY DATA SHEET PIR

SECTION I - IDENTIFICATION

SAFETY DATA SHEET C NC SATINA MED GLOSS

Safety Data Sheet. Tuxton Select Full Synthetic 0W20 API SN/GF-5

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET 5/19/2017

MATERIAL SAFETY DATA SHEET TS

I PRODUCT AND COMPANY IDENTIFICATION

BUDGET MOLDERS SUPPLY, INC CORPORATE PARK DRIVE MACEDONIA, OHIO MATERIAL SAFETY DATA SHEET MSDS NO.: DATE: May 22, 2007

All Multi-Tech Non-Phthalate Color Inks MATERIAL SAFETY DATA SHEET

INNERBOND GP70S KITCHEN & BATH SEALANT

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Version /28/2006

MATERIAL SAFETY DATA SHEET Artisan Intensive Stone Cleaner SECTION 1 PRODUCT NAME AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

Page Number: 1 of

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET. Section 2: Hazard Identification Classification of the chemical in accordance with paragraph (d) of :

PRODUCT NAME: SUPERCOAT 316L HMIS CODES H F R P PRODUCT CODE: G EFFECTIVE DATE: NAME OF PREPARER: DARRELL BADERTSCHER

Version /08/2003

GulfTEC Synthetic Motor Oil 0W-20

Ingredient CAS Number Weight % ACGIH TLV PEL STEL Trichloroethylene >90.0 % <1.0 % <1.0 %

MATERIAL SAFETY DATA SHEET

=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Air Tool Lubricant MSDS. Air Tool Lubricant. (800) (Poison Control USA) 24 Hours (800) (CHEMTREC) 24 Hours. Not Applicable - Mixture

=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

RILCO INC st STREET ROCK ISLAND, IL PRODUCT NAME: RILCO Tapping Oil 2889 / NFPA CHEMICAL NAME: N/A HAZARD

Material Safety Data Sheet RUST VETO 342

MATERIAL SAFETY DATA SHEET

Safety Data Sheet. 503 Main Street Belle Chasse, LA 70037

Material Safety Data Sheet

Safety Data Sheet. BOSS 139 Hi-Temp Mortar. Section 1. Identification. Section 2. Hazards Identification. Synonyms Manufacturer Stock Numbers

Transcription:

Safety Data Sheet Manufacturer's Name: StanChem, Inc. 401 Berlin Street East Berlin, CT 06023 Emergency Telephone Number: CHEMTREC 1-800-424-9300 Information Telephone Number: (860) 828-0571 Date of Preparation: April 16, 2015 Section I Product Identification Product Number: Product Name: Product Class: 69x1732 Incralac Acrylic Section II Hazard Identification Hazard Classification: Flammable Liquid Symbol: Signal Word: Danger Hazard Statements: Highly Flammable Liquid and Vapor. Harmful in contact with skin or if inhaled Causes serious eye irritation. Causes skin irritation Suspected of causing cancer if inhaled. May cause respiratory irritation May be fatal if swallowed and enters airways. May cause drowsiness or dizziness. May cause damage to organs through prolonged or repeated exposure if inhaled. Suspected of damaging fertility or the unborn child Precautionary Statements: Keep container tightly closed. Use only non sparking tools. Keep away from heat and flames. No Smoking. Containers must be properly grounded before beginning transfer. Do not breathe vapors. Do not contact eyes, skin and clothing. Wear protective gloves. Wash hands thoroughly after using Dispose of in accordance with local, regional, national, international regulations as specified Product: 69x1732 StanChem, Inc. Page 1 of 5

Section III-Hazardous Ingredients Occupational Exposure Limits Ingredient CAS# Weight% ACGIH TLV OSHA PEL (ppm) (ppm) Xylene* 1330-20-7 52.0-54.0 150 100 Methyl Ethyl Ketone 78-93-3 1.0-3.0 200 Toluene 100-88-3 27.0-28.0 100 100 *Contains Ethyl benzene CAS# 100-41-4 Section IV First Aid Measures First Aid Procedures: Inhalation: Remove individual to fresh air. Administer oxygen if breathing is difficult. Consult a physician Skin: Wash thoroughly with soap and water. Remove contaminated clothing Eyes: Immediately flush eyes with plenty of water for at least 20 minutes. Consult a physician. Ingestion: Dilute with clear fluid, then immediately seek medical attention. Section V Fire and Explosion Hazard Data Flammability Classification: OSHA Flammable Liquid 1B DOT Flammable Liquid Flash Point 25-40 F Tag Closed Cup LEL 1.0% Extinguishing Media: Dry Chemical Carbon Dioxide Alcohol Foam Unusual Fire and Explosion Hazards: Keep container tightly closed. Isolate from heat, electrical equipment, sparks, and open flame. Closed containers may explode when exposed to extreme heat. Application to hot surfaces requires special precautions. Vapors are heavier than air. Vapors may travel across the ground and reach remote ignition source causing a flashback fire. Use water to keep exposed containers cool. Use supplied-air breathing equipment for enclosed or confined spaces or as otherwise needed. Section VI Accidental Release Measures Steps to be Taken in Case Avoid all sources of ignition. Ventilate area. Stop spill at source, dike to prevent Material is Released or spreading. Pump liquid into containers. The remainder should be removed with Spilled inert absorbent use non-sparking tools. Section VII Safe Handling and Storage Handling: Use only non sparking tools. Keep away from heat and flames. Containers must be properly grounded before beginning transfer. Empty containers may contain product residue; follow MSDS and label warnings even after the container has been emptied. Avoid Product: 69x1732 StanChem, Inc. Page 2 of 5

exposing product to heat above 150 o F. Store drum below 90 o F Storage: Store closed drums with bung up position. Store only in tightly closed properly vented containers. Section VIII Exposure Controls and Personal Protection Respiratory Protection: Approved chemical/mechanical filters designed to remove organic vapors. Ventilation: Local exhaust as required by job conditions to keep TLV below acceptable limits. Refer to OSHA regulations 29 CFR Part 1910.94. Protective Gloves: Wear chemical resistant gloves Eye Protection: Use safety eyewear with splash guards or side shields Other Protective Equipment: None. Hygienic Practices: Eye wash and shower should be available. Use under well ventilated conditions. Personnel should wash thoroughly after handling product. Always wash-up before eating, smoking or using the toilet facilities. Do not breathe vapor, do not contact eyes, skin and clothing. Precautions To Be Taken in: Keep away from heat or open flames. Handling and Storing: Other Precautions: Avoid contact with eyes and skin Boiling Point 180-240ºF Weight per Gallon 7.5 lb./gal VOC content 739 g/l Percent Volatility 76% Viscosity 40-50 sec Zahn #1 Section IX Physical Data Section X Stability and Reactivity Stability: Hazardous Polymerization: Hazardous Decomposition Products: Conditions To Avoid: Incompatibility (materials to avoid): Stable Will Not Occur Thermal decomposition may yield carbon monoxide and/or carbon dioxide. N/A Strong oxidizing agents Primary Routes of Exposure Eye Contact Skin Contact Inhalation Ingestion Section XI Toxicological Information Medical Conditions Sinus Dermatitis Product: 69x1732 StanChem, Inc. Page 3 of 5

Prone to Aggravation by Exposure: Product Toxicology Carcinogenicity: NTP? No IARC Monographs? Yes -2B (ethyl benzene) OSHA Regulated? No Section XII Ecological Information Potential to Bioaccumulate:Unknown Aquatic Toxicity: No data available for this product Section XIII Disposal Considerations Waste Disposal Methods: Disposal should be in accordance with local, state and national regulations. Section XIV Transportation Technical Name: Proper Shipping Name Identification Number: Hazard Class/Division: Packing Group: 69x1732 Incralac Paint UN1263 3 (Flammable Liquid) II The information provided herein may not include the impact of additional regulatory requirements (e.g. for materials meeting the definition of a hazardous waste under RCRA, hazardous substances under CERCLA, and/or marine pollutants under CWA or other similar federal, state or local laws) or any associated exceptions or exemptions under regulations applicable to the transport of this material. Section XV Regulatory Information TSCA All components of this product are on the TSCA Inventory or are exempt from TSCA Inventory requirements. SARA 313 Reporting A number of the constituents within the formulation are required to be reported under this regulation. California Prop. 65 Warning: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Hazard Rating Systems Section XVI Other Information NFPA 704* HMIS** Key: 0 - Insignificant; Health: 2 Health: 2 1=Slight 2 = Moderate; Flammability 3 Flammability 3 3=High 4= Extreme; Reactivity 0 Reactivity 0 I= Respirator, Eye Protection and gloves Personal Protection I Product: 69x1732 StanChem, Inc. Page 4 of 5

*National Fire Protection Association rating identifies the severity of hazards of material during a fire emergency (i.e., on fire ) **Hazardous Materials Identification System, National Paint and Coatings Association rating applies to product as packaged (i.e., ambient temperature) NOTICE This information is furnished without warranty, representation, inducement or license of any kind, except that it is accurate to the best of StanChem's knowledge or obtained from sources believed by StanChem to be accurate. StanChem does not assume any legal responsibility for use or reliance upon same information. Customers are encouraged to conduct their own tests. For additional technical information contact StanChem. Product: 69x1732 StanChem, Inc. Page 5 of 5