Product Overview GSA # GS-07F-0340M

Similar documents
Project Incorporation of Sea Level Rise City of Newport Beach Approach for Balboa Islands, City of Newport Beach, California

Introduction. Geomembrane lining systems are used in a variety of different applications. Landfill Lining Landfill Capping Salt Piles Lagoons / Ponds

Flood Preparedness and Response

STOPPING THE UNDERWATER DIVER THREAT

SECTIONAL SNOW PUSHER NEW HOLLAND CONSTRUCTION

SLAMDAM IS THE QUICK AND EFFICIENT SOLUTION TO CREATE A TEMPORARY DAM

GATOR BASE Case Study

Careful planning will prevent unwanted headaches later!

PRO-ROD TM COILED ROD. Reduce Maintenance Increase Production Enhance Profit

Advantages & Specifications for the Use of Perma-Patch for the Repair of Potholes

4/20/17. #32 - Coastal Erosion Case Histories - Lake Michigan

The sandless sandbag. Putting water in its place!

T130/T131/T147. Economy Basket Stretcher with Lifting Kit

Superior Security and Defense in the Age of Terror:

BoatWasher Swede, , MS Float

Proposed Sand/ Moram Mining Project at Gata No.- 17/1 Village- Sehjana, Tehsil & District- Hamirpur, U.P. RISK ASSESMENT RISK ASSESSMENT

Temporary Flood Protection Research at U of M. Title of presentation. Faculty of Engineering. Shawn Clark, Ph.D., P.Eng.

Incident Command System Position Manual

The Failure of the Kamaishi Tsunami Protection Breakwater

COMPANY PROFILE. Driven By Ingenuity

Tom Swift President & COO

Committee Input No. 35-NFPA [ Chapter 1 ] Submitter Information Verification. Committee Statement

Selective Fit Pins and Bushings Precision Guiding for Dies Innovation, Quality, and a Full Line, both Inch and Metric

Ocean Structures and Material Prof. Dr. Srinivasan Chandrasekaran Department of Ocean Engineering Indian Institute of Technology, Madras

Big time solutions... that s the WAVE.

TABLE OF CONTENTS. 14 Operating Instructions Load vs. Contact

By Michael Hurley Specialized Safety Products

RoaDrain Synthetic Subsurface Drainage Layer (SSDL)

FLUID POWER FLUID POWER EQUIPMENT TUTORIAL ACCUMULATORS. This work covers part of outcome 2 of the Edexcel standard module:

Resource Allocation for Malaria Prevention

MSE CONTROLLED DOCUMENT. Radiological HS&E Precautions for NORM Contaminated Tanks, Vessels & Separators

10% OFF HHPROMO. Havahart Spray Away Animal Repellent Sprinkler Owner s Manual Model #5266. Caught a critter in the act?

This training is intended to be educational and should not be construed as legal guidance. It is provided as a courtesy to our customers and others

Successful traffic operations require precise, real-time information.

The Time Has Come For Coiled Rod. Reprinted from Well Servicing magazine

GUIDANCE FOR THE CREATION OF ARTIFICIAL SETTS

La Rance tidal power plant in La Rance, France. Tidal and Wave Energy

ASCENDERS ASCENDERS RUN UP THE WALL WITH 600 POUNDS ON THE LINE APA-5 POWERED ROPE ASCENDER APA-5 POWERED ROPE ASCENDER

Incident Command System Position Manual RAPID EXTRACTION MODULE SUPPORT (REMS) ICS

Standard Operating Procedures (SOP) for Desert Locust Ground Control. 2 Desert Locust Ground Control SOP. 1. Control process.

OE Barricade Guide Development. Michelle Crull, PhD, PE Wallace Watanabe James Manthey, PE Charles Barker, PE

L O O D O O L E U R O. Dyke Protection Brochure General Information and Methodology E A N T C O N. Notes:

TRENCH AND EXCAVATION COLLAPSE

Suitable Applications Check dams may be appropriate in the following situations: To promote sedimentation behind the dam.

Rapid Recovery Solution (R2S)

Barcol-Air BRM Radiant Module

RESOLUTION OF THE BOARD OF SUPERVISORS OF ORANGE COUNTY, CALIFORNIA. August 8, 2017

RISK ASSESSMENT HAZARD IDENTIFICATION AND RISK ASSESSMENT METHODOLOGY

A Distant Mirror: Credit contraction, monetary policy and commodity prices during the Great Depression. John Kemp Reuters 30 January 2009

Unit 24: Applications of Pneumatics and Hydraulics

PHOENIX, ARIZONA USA

S/Y MORSKI ZEKAN TECHNICAL INFORMATION

High Pressure Air Systems (HPAS)

North Shore of Long Island, Feasibility Study

CAUTION Hard copies of this document may not be the current version. Refer to the "I Am The Key" verify the current version,

Igniting Solutions for a Safer Future

Restoring Fluid Flow in Tubing Strings

SCIENTIFIC INTERNATIONAL. IceZone saves restaurant operator millions! Case Study

The advantages of the Impact NecksGen unit

COMPRESSED AIR DISTRIBUTION SYSTEMS

The Glockemann Pump Site & Installation Guide

Target Tracker. RCEV- Remote Control Electric Vehicle UGV- Unmanned Ground Vehicle

Disposal: Science and Theory

Take the high road to ensure underground safety.

Cargo Hold Cleaning Solution for Cement Clinker

Advantage Lockers & Bike

Secrets to Swim Spa Buying Success. What is a Swim Spa?

"HAND, WRIST AND FINGER SAFETY"

Best Practices for Ultrasonic Compressed Air Leak Detection

FUEL CELL DIVER PROPULSION VEHICLE

SAFE CAPACITY TEST: INNOVATION AND SAVINGS

GUIDE TO RUNNING A BIKE SHARE. h o w t o p l a n a n d o p e r a t e a s u c c e s s f u l b i k e s h a r e p r o g r a m

POOL BACKWASH SYSTEM. Installation manual. Proudly manufactured by

Oceans Humans both depend on it and threaten it with their activities

Innovating Today s Solar Technology for the Future of Tomorrow

Your local gas generation partner. Precision series Modular gas generation solution for GC.

AN ANALYSIS ON HIGH PRESSURE DYNAMIC CALIBRATORS USED IN THE DEFENSE AREAS

Huntington District. For More Information Contact (304)

CROSS COURSE INSTRUCTION DOCUMENT

Port Aransas Beach Committee Recommendations for Changes in Beach Maintenance Practices Compiled by Richard L. Watson, Ph.D.

Dredging Keeping Our Underwater Highways Open

Defibtech s Latest Advancement The Lifeline ARM Automated Chest Compression (ACC) Device for Professionals

A hose layline contains important information for specifying the replacement assembly: manufacturer, hose trade name, working pressure and hose ID.

Crab and Lobster Live Holding System Part II (Water Pumps, Air Pumps and Pipework)

Caltrans compendium of underwater sound data from pile driving 2014 update

Products For The. Fire & Emergency Services. Cintec International Limited

Deployment of subsurface FADs from small vessels for fishing communities in Choiseul

Motion is Money Helping increase productivity and reduce risk.

U.S. Global Position (Imports/Exports) Dermot Hayes Iowa State University

Fair Winds Boat Repairs, LLC Riberia St. #7 St. Augustine, Fl

2.4 Gutter and Downspout Sizing and Location Calculations

Improving distillation tower operation

Green Dot Awards Submission: Sandwichbike

Work Zone Traffic Safety

Design of Spillway Upgrades

A LIFE OF THE WELL ARTIFICIAL LIFT STRATEGY FOR UNCONVENTIONAL WELLS

DN300 DN2000 C Plunger Valve

Release: 1. UEPOPL002A Licence to operate a reciprocating steam engine

Bridgestone New Zealand Limited

ENSURING AN ACCURATE RESULT IN AN ANALYTICAL INSTRUMENTATION SYSTEM PART 1: UNDERSTANDING AND MEASURING TIME DELAY

Transcription:

Product Overview GSA # GS-07F-0340M Rapid Deployment Flood Wall

Are you still fighting floods the way your great-grandfather did?

For over 100 years, floods have been fought with two main weapons human labor and sandbags. It s time for a change. Human labor is finite and expensive. Sandbags are inefficient. And neither takes advantage of the great array of construction equipment readily available in most flood situations. What is needed is a dramatic improvement in floodfighting technology, an improvement that allows you to leverage your limited labor resources with the immense power of earthmoving machinery. What is needed is an improvement that is dramatically superior to the tired, old sandbag. Sandbags are a 100-year-old, labor-intensive technology.

Meet the Rapid Deployment Flood Wall.

Anyone familiar with stacking sandbags knows that it is slow, miserable, backbreaking work. There had to be a better way, decided 20-year veteran floodfighter Al Arellanes. In 1983, Arellanes, in conjunction with the US Army Corps of Engineers, began developing improved and innovative methods for combating floods. In 1996, as President of Geocell Systems, Arellanes licensed the Army Corps Sand Confinement Grid technology and used it as a basis for developing the Rapid Deployment Flood Wall (RDFW). RDFW is a modular, collapsible plastic grid that serves as a direct replacement for sandbag walls. Assembled by as few as two people, an RDFW wall is quickly expanded into place and then filled from the top with a loader, excavator, bottom-dump, or other piece of earthmoving equipment. Drawing on his 20 years of floodfighting experience, Arellanes and the Geocell team designed RDFW specifically to meet the needs and constraints of realworld floodfighting situations. Besides being fast to deploy, RDFW is light enough to be handled by two people, small enough not to be unmanageable in the wind, fits easily into a pickup truck or helicopter, requires no special tools, and is simple enough for anyone to use. RDFW has a smaller footprint and crosssection than sandbag walls, making it ideal for levee topping or urban use, and RDFW can be filled with a wider range of materials than sandbags. RDFW is available now.

There is a USACE-tested alternative to sandbags.

In April of 2000, the U.S. Army Corps of Engineers Engineering Research and Development Center (ERDC) in Vicksburg, Mississippi conducted extensive testing on Geocell s RDFW. The results were conclusive and stunning. As noted in the official USACE report, a 50-foot-long, 4-foot-high section of RDFW was subjected to 40 hours of wave action totalling 72,000 waves. Wave height was varied between 0.42 ft and 1.52 ft. The Rapid Deployment Flood Wall proved able to withstand this severe testing with minimal, easily repairable damage. Total sand loss proved to be only eight percent. In addition to wave testing, RDFW was also tested for its ability to contain hydrostatic load. At a maximum head of 3.33 ft, underseepage was only 22.8 gallons/hr per foot of wall. At this rate, a small 3-hp gasoline pump could drain nearly 400 feet of wall. ERDC Testing Wave Exposure: 40 hours Wave Height (max.): 1.52 feet Total Wave Exposure: 72,000 waves Hydrostatic test duration: 128 hours Hydrostatic Head (min.): 2.0 feet Hydrostatic Head (max.): 3.33 feet Under-seepage Rate (max.): 22.8 gal/hr per linear foot of wall RDFW is a USACE-tested alternative to sandbags.

Sandbags are more expensive than you might think.

Slope = 1:1 4' 4' 4' 4' 12' Typical Sandbag Wall RDFW Wall In a perfect world, crews of well-trained personnel would stack sandbags into efficient, rectangular walls. In real-world floodfights this is rarely, if ever, the case. More typical of a real-world floodfight situation is a trapezoidal wall, wide at the base and narrowing at the top. Sandbags in such a structure are likely to be stacked neatly at first and then, as worker fatigue sets in, quite haphazardly. RDFW, on the other hand, always assembles into a neat, rectangular wall. And RDFW s rectangular shape means that an RDFW wall requires only half the fill material of an equivalent trapezoidal wall. This not only reduces the time and materials required for construction, but also reduces demobilization costs. Additionally, RDFW s smaller footprint makes it ideal for urban environments or levee crown construction, where workspace is often limited. RDFW requires only half as much fill as sandbags.

In some floodfights, speed of deployment is everything.

In some floodfights, there is nothing more important than speed of deployment. When rivers rise more rapidly than expected, the ability to quickly construct a few thousand feet of flood wall might be the only thing saving an entire community from inundation. According to the State of California Department of Water Resources Flood Center, a 35-person crew can construct a trapezoidal sandbag wall four feet high and 100 feet long in 19.5 hours. With RDFW, six laborers and one loader operator can construct an equivalent wall in just one hour. That s nearly 20 times faster than sandbags. RDFW offers a tremendous savings, measured not only in time, but in lives and property spared. RDFW vs. Sandbag Comparison: 1,000-foot wall, 4 feet high 20 Time (hours) 15 10 5 Sandbags: 19.5 hours RDFW: 1 hour RDFW deploys twenty times faster than sandbags.

Have you ever found yourself in a floodfight with more than enough manpower?

You can win any floodfight given enough manpower. But when was the last time you really had enough? As water levels rise and volunteers get tired, winning the floodfight can look less and less certain. Losses may begin to mount, and hard decisions will soon have to be made about which areas to save and which to sacrifice. Does it really have to be this way? With RDFW, you multiply your manpower by nearly 100. Using RDFW, a 7-person crew can construct a wall in one hour that would take a 35-person crew 19.5 hours to build using sandbags. That s 7 manhours vs. 683 manhours. RDFW allows you to leverage your heavy machinery your loaders and bottom dumps instead of relying on labor-intensive shovels and sandbags. More importantly, RDFW enables you to protect far more area with far less labor than sandbags. RDFW is nearly 100 times more labor-efficient than sandbags.

What can you do with used sandbags?

What can you do with used sandbags? Not much. In the aftermath of a typical floodfight, sandbags usually find only one home the local landfill. Sandbag disposal is a hidden cost of floodfighting that is often overlooked in disaster planning. In fact, it is often more costly to dispose of used sandbags than to buy the sand that filled them in the first place. RDFW is different. When an RDFW wall is no longer needed, the RDFW grids can simply be lifted out, leaving behind nothing more than a pile of sand. This fill material can then be resold, or stockpiled nearby for future use. The RDFW grids themselves can be inspected, repaired if necessary, and recertified for use in the next floodfight. And since RDFW is made of a recyclable plastic, not even damaged panels will find their way into local landfills. RDFW is reusable and recyclable. Sandbags are not.

Use. Recertify. Re-use.

One of RDFW s biggest advantages over sandbags is that it can be dismantled, recertified and re-used. The ability to re-use RDFW over several flood events dramatically reduces its effective per-use cost. Try doing that with sandbags. Even when an RDFW grid module is damaged, it can still be repaired and recertified for use again. Constructed out of 14 plastic panels, a damaged RDFW grid module can be rebuilt simply by replacing any damaged panels within that module. Re-using RDFW dramatically reduces the high cost of floodfighting.

Say good-bye to mildew and rats.

How safe is your stockpile of sandbags? When you really need them, will you open your warehouse to find your burlap mildewed? Will your plastic bags be infested with rats nests? What percentage of bags can you expect to lose? When the water is rising, can you afford to lose any? Why take chances with sandbags? RDFW is made of a tough, flexible, environmentally responsible plastic produced by Eastman Chemical Company and extruded specifically for Geocell s RDFW by Spartech Corporation. It is immune to mildew, is resistant to vermin, and can be stored for 10 years or more in any working warehouse. RDFW can be safely stored for ten years in any working warehouse.

Sandbag walls waste space, materials, and time.

Stop and think about it. What are the hidden costs of sandbags? Sandbags may be cheap to purchase, but they are expensive to use. Sandbag walls have inefficient trapezoidal or triangular cross-sections, requiring up to twice as much fill as square walls. Sandbags require enormous amounts of physical labor which, while it is often provided by volunteers, is often paid for after the flood event as part of disaster relief. Sandbag walls can only be used once and are costly to dispose of, typically being hauled off to landfills at great expense. And in stockpiling sand- bags, there is almost always some loss to vermin and mildew. But beyond the hidden monetary costs of sandbags, consider the true cost of relying on sandbags. Sandbags have proven insufficient defense against floods time and again. The slow, manual rate at which sandbag walls can be constructed has resulted in billions of dollars in flood damages, year after year after year. But more significant than any amount of dollars is the trauma resulting from flooded homes and the loss of life that occurs annually as the result of flooding. That is the true cost of sandbags. RDFW provides real savings compared to sandbags.

Finally, an alternative to sandbags!

It has taken years of development and testing, but mankind has finally created a better floodfighting tool than the tired, old sandbag. Geocell s Rapid Deployment Flood Wall provides a superior defense against flooding by being quick and easy to deploy, requiring less fill material, having a smaller footprint, and requiring 99% less labor than sandbags. RDFW allows you to make use of modern earthmoving machinery to construct more flood wall in less time. With RDFW in your inventory, you can protect dramatically greater amounts of land and property than you could with sandbags. More importantly, RDFW s superior coverage reduces the threat to human life. RDFW is reusable, making it extremely cost-effective. Unlike sandbags, RDFW requires no costly disposal for itself or its fill material. RDFW is made of an environmentally friendly, recyclable Eastman plastic that can be stored for 10 years or more in any working warehouse. RDFW is also resistant to the vermin and immune to the mildew which plagues sandbags in storage. RDFW is available now for order in any quantity (GSA # GS-07F-0340M).

Suite 202 Pier 54, Terry Francois Blvd. San Francisco, CA 94107 (415) 541-5300 info@geocellsystems.com GSA # GS-07F-0340M