Training and Evaluation Outline Report Status: Approved 12 Nov 2014 Effective Date: 20 Jul 2017 Task Number: 05-PLT-5504 Task Title: Inspect Underwater Structures Distribution Restriction: Approved for public release; distribution is unlimited. Destruction Notice: None Foreign Disclosure: FD1 - This training product has been reviewed by the training developers in coordination with the Fort Leonard Wood, MO foreign disclosure officer. This training product can be used to instruct international military students from all approved countries without restrictions. Supporting Reference(s): Step Number Reference ID Reference Name Required Primary ATP 5-19 (Change 001 09/08/2014 78 Pages) RISK MANAGEMENT Yes No NTRP 4-04.2.8 NTRP 4-04.2.9 Conventional Underwater Construction and Repair Techniques Expedient Underwater Construction and Repair Techniques TM 3-34.73 PORT CONSTRUCTION AND REPAIR Yes No Yes Yes Yes No Conditions: The element is given an Operation Order (OPORD) with a requirement to inspect an underwater structure at a designated location. A secured area or a security element is provided. The inspection equipment and a boat with a motor are provided. This task should not be trained in MOPP 4. Note: The Commander must still determine at what level of training they would want the element to perform. Crawl, walk or run. This can only be determined after consideration as to the units training level. The Commander prior to evaluating an element in the conduct of the task must determine if it will be conducted in a Live, Virtual, or Constructive environment, additionally it must also be determined which condition as described below that the element will conduct the task. The selection made for this task is at a trained level of proficiency. The commander must determine which of the environments below will best suit the unit and the proficiency level at which the unit is. When conducting crawl or walk level training units should not increase the intensity until the unit has achieved the standards and then unit trainers should include variables that increase proficiency in all conditions. Note: The condition statement for this task is written assuming the highest training conditions reflected on the Task Proficiency matrix required for the evaluated unit to receive a "fully trained" (T) rating. Note: Condition terms definitions: Dynamic Operational Environment: Three or more operational and two or more mission variables change during the execution of the assessed task. Operational variables and threat Tactics, Techniques, and Procedures (TTPs) for assigned counter-tasks change in response to the execution of Blue Forces (BLUFOR) tasks. Complex Operational Environment: Changes to four or more operational variables impact the chosen friendly COA/mission. Brigade and higher units require all eight operational variables of Political, Military, Economic, Social, Infrastructure, Information, Physical environment, and Time (PMESII-PT) to be replicated in varying degrees based on the task being trained. Single threat: Regular, irregular, criminal or terrorist forces are present. Hybrid threat: Diverse and dynamic combination of regular forces, irregular forces, and/or criminal elements all unified to achieve mutually benefiting effects. This task should not be trained in MOPP 4. Standards: The element must inspect and record all critical dimensions and report the structural integrity of the underwater structure to the appropriate authority within the time constraints of the OPORD. Note: Leaders are defined as the Commander, Executive Officer, First Sergeant, Operations Sergeant, Platoon Leaders, Platoon Sergeants, Squad Page 1
Leaders, and Team Leaders. Live Fire: No Objective Task Evaluation Criteria Matrix: Plan and Prepare Execute Assess Operational Environment SQD & PLT Training Environment (L/V/C) Training/Authorized % of Leaders Present at % of Soldiers Present at External Eval % % Critical % Leader Task Assessment Dynamic (Single Threat) >=85% >=91% >=90% T Static (Single Threat) Day IAW unit CATS statement. 75-84% 65-74% 60-64% >=80% 75-79% 60-74% Yes No 80-90% 65-79% 51-64% All 80-89% T- P P- <All <=79% <=59% <=59% <=50% U Remarks: None Notes: All required references and technical manuals will be provided by the local Command. Safety Risk: Medium Task Statements Cue: None Page 2
DANGER Leaders have an inherent responsibility to conduct Risk Management to ensure the safety of all Soldiers and promote mission accomplishment. WARNING Risk management is the Army s primary decision-making process to identify hazards, reduce risk, and prevent both accidental and tactical loss. All Soldiers have the responsibility to learn and understand the risks associated with this task. CAUTION Identifying hazards and controlling risks across the full spectrum of Army functions, operations and activities is the responsibility of all Soldiers. Page 3
NOTE: Assess task proficiency using the task evaluation criteria matrix. Steps and Measures NOTE: Asterisks (*) indicate leader steps; plus signs (+) indicate critical steps. STEP/MEASURE GO NO-GO N/A +* 1. The element leader examines the OPORD and prepares for the mission. +* a. Ensures that the OPORD contains all critical information. * b. Evaluates blueprints and as-built drawings to determine the critical inspection points. * c. Obtains any relative information from on site personnel. +* d. Determines the need for any special construction equipment/material to conduct the inspection. +* e. Ensures that the level of inspection (I, II, or III) was clearly stated in the OPORD and understood at all levels of command. +* f. Plans the mission and completes the operation plan (OPLAN). +* g. Marks all critical areas to be inspected. * h. Briefs the inspection team. +* i. Inspects personnel and equipment. + 2. The element conducts inspections of the marine structure. + a. The element inspects the present state of the structure. (1) Inspects wood structures from the mud line up to the base for signs of the following damage: (a) Biological attack. (b) Shrinkage. (c) Overloading. (d) Structural connection corrosion. (e) Abrasion damage. (f) Mechanical damage. (2) Inspects steel structures from the mud line up to the base for signs of the following damage: (a) Cathodic protection corrosion. (b) Abrasion. (c) Loosening of structural connections. (d) Fatigue. (e) Overloading. (f) Loss of foundation materials. (g) Mechanical damage. (3) Inspects concrete structures from the mud line up to the base for signs of the following damage: (a) Weathering (freezing/thawing deterioration). (b) Abrasion wear. (c) Chemical deterioration. (d) Axial overloading. (e) Shrinkage. (f) Swelling. (g) Discoloration, cracks, and spalling. (h) Mechanical damage. + b. The element records all data on the standard pile inspection record sheet, including the dimensions of the piles, connecting hardware, and strength members. +* 3. The element leader verifies inspection data. * a. Ensures that all critical areas are inspected. +* b. Ensures that all data is accurate and properly recorded. 4. The element disassembles, performs Preventive Maintenance Checks and Services (PMCS), and stores the equipment properly. * 5. The element leader conducts an After Action Review (AAR). * 6. The element leader submits reports and forwards all pertinent data and any recommendations to the appropriate authority. Page 4
TASK / PERFORMANCE EVALUATION SUMMARY BLOCK Training Unit ITERATION 1 2 3 4 Date of Training per Iteration: Day or Night Training: Day / Night Day / Night Day / Night Day / Night # % # % # % # % Total Leaders Authorized % Leaders Present Total Soldiers Authorized % Soldiers Present Total Number of Measures Total Number of Critical Measures Live Fire, Total Number of Critical Measures Total Number of Leader Measures % % Critical % Critical % Leader MOPP LEVEL Evaluated Rating per Iteration T, T-, P, P-, U Mission(s) supported: None MOPP 4: Never MOPP 4 Statement: None NVG: Never NVG Statement: None Prerequisite Collective Task(s): Step Number Task Number Title Proponent Status 05-CO-0007 Prepare an Operation Order (OPORD) 05 - Engineers (Collective) Approved 71-CO-5100 Conduct Troop Leading Procedures for Companies 71 - Combined Arms (Collective) Approved Supporting Collective Task(s): Step Number Task Number Title Proponent Status 05-PLT-5505 Repair Underwater Structures 05 - Engineers (Collective) Approved 2. 05-PLT-5506 Maintain Underwater Structures 05 - Engineers (Collective) Approved 2. 05-PLT-5505 Repair Underwater Structures 05 - Engineers (Collective) Approved 2. 05-PLT-5509 Perform Self-Contained Underwater Breathing Apparatus (Scuba) Operations 05 - Engineers (Collective) Approved 6. 05-CO-0018 Conduct Report Procedures 05 - Engineers (Collective) Approved Page 5
OPFOR Task(s): Task Number Title Status 71-CO-8510 OPFOR Disrupt Approved Supporting Individual Task(s): Step Number Task Number Title Proponent Status 052-12D-1701 Rescue a Diving Casualty Underwater 052 - Engineer (Individual) Approved 052-238-1607 Perform Underwater Photography 052 - Engineer (Individual) Approved 052-238-1620 Inspect Underwater Steel Structures 052 - Engineer (Individual) Approved 052-238-1621 Inspect Underwater Concrete Structures 052 - Engineer (Individual) Approved 052-238-1622 Inspect Underwater Timber Structures 052 - Engineer (Individual) Approved 052-238-1639 Chart a Dive 052 - Engineer (Individual) Approved 052-238-1640 Operate a Diving Console 052 - Engineer (Individual) Approved 052-238-1645 Charge an Air System 052 - Engineer (Individual) Approved 052-238-1652 Perform an Underwater Survey 052 - Engineer (Individual) Approved 052-238-2511 Direct the Setup of a Scuba Station 052 - Engineer (Individual) Approved 052-238-2512 Direct the Setup of a Surface-Supplied Dive Station 052 - Engineer (Individual) Approved 052-238-3412 Select a Decompression Method 052 - Engineer (Individual) Approved 052-238-3416 Calculate Breathing Gas Requirements to Support Diving Operations 052 - Engineer (Individual) Approved 052-238-3431 Conduct a Predive Briefing of a Scuba Dive Station 052 - Engineer (Individual) Approved 052-238-4508 Prepare a Diving-Mission Operation Order (OPORD) 052 - Engineer (Individual) Approved Supporting Drill(s): None Supported AUTL/UJTL Task(s): ART 1.6.4 Task ID Provide Diver Support Title TADSS TADSS ID Title Product Type Quantity No TADSS specified Equipment (LIN) LIN Nomenclature Qty D32859 DIV EQ ST DIV SUP A 1 D49154 DIV EQ ST IND SWMMR 1 D32723 DIV EQ ST OPEN CIR 1 92018N Cylinder Scuba Tanks, 3500 Psi 80-102 Cu Ft 1 D32927 DIV EQ ST DIV SUP B 1 Materiel Items (NSN) NSN LIN Title Qty No materiel items specified Environment: Environmental protection is not just the law but the right thing to do. It is a continual process and starts with deliberate planning. Always be alert to ways to protect our environment during training and missions. In doing so, you will contribute to the sustainment of our training resources while protecting people and the environment from harmful effects. Refer to the current Environmental Considerations manual and the current Page 6
GTA Environmental-related Risk Assessment card.. Safety: In a training environment, leaders must perform a risk assessment in accordance with current Risk Management Doctrine. Leaders will complete the current Deliberate Risk Assessment Worksheet in accordance with the TRADOC Safety Officer during the planning and completion of each task and sub-task by assessing mission, enemy, terrain and weather, troops and support available-time available and civil considerations, (METT-TC). Note: During MOPP training, leaders must ensure personnel are monitored for potential heat injury. Local policies and procedures must be followed during times of increased heat category in order to avoid heat related injury. Consider the MOPP work/rest cycles and water replacement guidelines IAW current CBRN doctrine.. Page 7