Introduction to Fitting Line he wyer Series -1000 quality tube fittings have been designed and manufactured to provide reliable leak-free connections in a wide variety of applications. reliable leak-free tubing system will be achieved by combining the proper selection and handling of tubing with the proper tube fitting selection and installation. he following information is provided to assist in the tube selection process. Material he tubing material chosen must be compatible with the system s contained media, pressure and temperature, as well as with the environment in which it will be installed. lso, the tubing and fittings materials should be similar for optimum sealing action to occur (stainless fittings for stainless tube, brass fittings for copper tube, carbon steel fittings for carbon steel tube, etc.). he mixing and contact of dissimilar materials may leave the system susceptible to galvanic corrosion and/or not allow proper tube fitting makeup to be achieved. Pressure and Flow he size of the tube s outside diameter (O..) and the necessary wall thickness are determined by the system s pressure and flow requirements. able details the suggested tubing sizes and wall thickness for use with instrumentation tube fittings. If no pressure is shown on the table for a particular size, the tube is not recommended for use with instrumentation tube fittings. he tubing system should not be utilized above the tube s maximum allowable working pressure. emperature he system s operating temperature may affect the initial choice of tubing material and may also affect the maximum allowable working temperature for the given tube size (see able B for temperature stress factors). Light Gas Service o provide a successful connection for light gas service, the tubing must have a thick enough wall to provide resistance for the setup action of the ferrules to further compensate for the tube s potential surface condition. Handling and Installation Surface scratches and gouges on tubing are a source of potential leaks. Some precaution when handling the tubing can help reduce surface scratches and maintain the surface finish as originally intended by the manufacturer. ubing should never be dragged across rocks, blacktop, pavement, or tubing storage racks as scratches and gouges can occur. Sharp blades should always be used in the tube cutters or hacksaws used to cut the tubing so as to provide a clean, square cut. ull cutting blades can cause internal and external hanging burrs, and cause the tubing to become oval and affect proper insertion within the fitting. s a good handling practice, tubing should always be deburred prior to tube fitting installation to help assure easy and complete tube insertion. dditionally, for bent tube assemblies, it is important to bend tubing prior to installing tube fittings, and to provide a sufficient straight length of tubing after the bend to allow the tube to be fully inserted into the fitting. lso, to eliminate weight stress from the tubing upon the fitting and to provide additional system support for vibration and thermal shock resistance, the tubing should always be supported by tube hangers, clamps or trays. Stress Factors For etermining ubing Pressure Ratings at levated emperatures - BL B emperature F 100 200 300 400 500 600 700 800 900 1000 1200 38 93 149 200 260 316 371 427 482 538 649 316.97.90.85.82.80*.78*.73*.37* *he precipitation of chromium carbides potentially resulting in intergranular corrosion may occur when exposed to operating temperatures. ube O.. [Size (in)] 1/16 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 2 Wall hickness of ube (Inches).010.012.014.016.020.028 5600 6850 8150 9500 12100 SINLSS SL UBING - BL Maximum llowable Working Pressure (psig) 8550 5450.035 11000 7000 5100 4050 2450.049 10300 7500 5850 4800 3500 2950 2400 2050.065 10300 8050 6550 4750 2800 2400.083 6250 5200 4250 3600 3150 2450.095 6050 4950 4200 3650 2850 2350.109 5800 4850 4200 2700 2000.120 4700 3650 3000 2200.134 4150 3400 2500.156 4900 2900.188 4900 3600 SSORIS & BOOKS LL O ORR: U.S. Phone 219 879-8000 U.K. Phone (+44) (0)1494-461707 ustralia Phone (+61) (0) 2 4272 2055 549
-1000 Fitting Line Series -1001 Male lbow Fitting Line G NU HX H WRNH P SPIFIIONS emperature Ranges: See reference able B. Pressure Ranges: See reference able. onnections: to 1-. imensions: onsult website, or contact factory. BY F P PIP HR -1001-1 -1001-2 -1001-3 -1001-4 -1001-5 -1001-6 -1001-7 -1001-8 -1001-9 -1001-10 -1001-11 hread Male $36.00b 3b 38.00b 2-1001-12-1001-13-1001-15-1001-16-1001-17-1001-18-1001-19-1001-20-1001-21-1001-22-1001-23 hread Male $19.50b 23.50b 37.00b 56.00b 4b 60.00b -1001-24 -1001-25 -1001-26 -1001-27 -1001-28 -1001-29 -1001-30 -1001-31 -1001-32 -1001-33 1-1- hread Male 1-1- $45.00b 47.00b 55.00b 50.00b 49.00b 78.00b 103.00b 99.00b 275.00b 350.00b Series -1002 Male onnector Fitting Line G NU HX B BOY F SPIFIIONS emperature Ranges: See reference able B. Pressure Ranges: See reference able. onnections: to. imensions: onsult website, or contact factory. SSORIS & BOOKS -1002-1 -1002-2 -1002-3 -1002-4 -1002-5 -1002-6 -1002-7 -1002-8 -1002-9 -1002-10 -1002-11 -1002-12 -1002-13 -1002-15 -1002-16 hread Male $16.00b 16.50b 1b 10.50b 11.50b 2b 1b 1 11.50b 9.50b 9.50b -1002-17 -1002-18 -1002-19 -1002-20 -1002-21 -1002-22 -1002-23 -1002-24 -1002-25 -1002-26 -1002-27 -1002-28 -1002-29 -1002-30 -1002-31 H BOY HX P PIP HR hread Male $1b 14.00b 12.50b 13.50b 18.50b 25.00b 19.50b 22.50b 56.00b -1002-32 -1002-33 -1002-34 -1002-35 -1002-36 -1002-37 -1002-39 -1002-40 -1002-41 -1002-42 -1002-43 -1002-44 -1002-45 1-1- 1- hread Male 1-1- $25.00b 35.00b 55.00b 63.00b 64.00b 65.00b 60.00b 138.00b 1 205.00b 380.00b 550 VISI OUR WBSIS: www.dwyer-inst.com www.dwyer-inst.co.uk www.dwyer-inst.com.au
-1000 Fitting Line Series -1003 Union Fitting Line G NU HX B BOY H BOY HX G NU HX SPIFIIONS emperature Ranges: See reference able B. Pressure Ranges: See reference able. onnections: to. imensions: onsult website, or contact factory. -1003-1 -1003-2 -1003-3 -1003-4 -1003-5 $ 16.00b 15.00b -1003-6 -1003-7 -1003-8 -1003-9 -1003-10 $2 53.00b 90.00b -1003-11 -1003-12 -1003-13 -1003-14 1-1- $9 180.00b 255.00b 435.00b Series -1004 Union lbow Fitting Line H WRNH P SPIFIIONS emperature Ranges: See reference able B. Pressure Ranges: See reference able. onnections: to. imensions: onsult website, or contact factory. G NU HX -1004-1 -1004-2 -1004-3 -1004-4 -1004-5 $39.00b 21.50b 21.50b 2-1004-6-1004-7-1004-8-1004-9-1004-10 $27.00b 45.00b 50.00b 80.00b 125.00b -1004-11 -1004-12 -1004-13 -1004-14 1-1- $150.00b 260.00b 335.00b 680.00b Series -1005 Union ee Fitting Line X H WRNH P B BOY G NU HX SPIFIIONS emperature Ranges: See reference able B. Pressure Ranges: See reference able. onnections: to. imensions: onsult website, or contact factory. SSORIS & BOOKS X X -1005-1 -1005-2 -1005-3 -1005-4 -1005-5 $57.00b 35.00b 35.50b 3b 37.50b -1005-6 -1005-7 -1005-8 -1005-9 -1005-11 $40.00b 6 7b 93.00b 195.00b -1005-12 -1005-13 -1005-14 1-1- $370.00b 465.00b 985.00b LL O ORR: U.S. Phone 219 879-8000 U.K. Phone (+44) (0)1494-461707 ustralia Phone (+61) (0) 2 4272 2055 551
-1000 Fitting Line Series -1006 Front Ferrule Fitting Line SPIFIIONS emperature Ranges: See reference able B. Pressure Ranges: See reference able. onnections: to. -1006-1 -1006-2 -1006-3 -1006-4 -1006-5 -1006-6 -1006-7 1.50b -1006-8 -1006-9 -1006-10 -1006-11 -1006-12 -1006-13 -1006-14 1-1- 4.25b 6.50b 7.25b 6 Series -1007 Back Ferrule Fitting Line SPIFIIONS emperature Ranges: See reference able B. Pressure Ranges: See reference able. onnections: to. -1007-1 -1007-2 -1007-3 -1007-4 -1007-5 -1007-6 -1007-7 $ 1.75b 1.50b 1.75b 2.50b -1007-8 -1007-9 -1007-10 -1007-11 -1007-12 -1007-13 -1007-14 1-1- 3.75b 5.25b 5.75b 8.75b 15.00b 3b Series -1008 Nut Fitting Line G NU HX SPIFIIONS emperature Ranges: See reference able B. Pressure Ranges: See reference able. onnections: to. imensions: onsult website, or contact factory. SSORIS & BOOKS Series -1012 Fitting Line L -1008-1 -1008-2 -1008-3 -1008-4 -1008-5 -1008-6 -1008-7 $4.50b 3.00b 3.75b 6.00b -1008-8 -1008-9 -1008-10 -1008-11 -1008-12 -1008-13 -1008-14 1-1- SPIFIIONS emperature Limits: See reference able B on the website. Pressure Limits: See reference able on the website. onnections: to. imensions: onsult website or contact factory. $8.25b 10.00b 40.00b 68.00b 1 H G HX B F -1012-1 -1012-2 -1012-3 -1012-4 -1012-6 -1012-9 Hose Barb $13.75b 13.50b 13.75b 14.50b 552 VISI OUR WBSIS: www.dwyer-inst.com www.dwyer-inst.co.uk www.dwyer-inst.com.au
-1000 Fitting Line Series -1009 Ferrule Set Fitting Line SPIFIIONS emperature Ranges: See reference able B. Pressure Ranges: See reference able. onnections: to. -1009-1 -1009-2 -1009-3 -1009-4 -1009-5 -1009-6 -1009-7 $5.00b 4.75b Series -1010 Bulkhead Union Fitting Line B BOY G NU HX H JM NU HX X H BOY HX SPIFIIONS emperature Ranges: See reference able B. Pressure Ranges: See reference able. onnections: to. imensions: onsult website, or contact factory. -1010-1 -1010-2 -1010-3 -1010-4 -1010-5 -1010-6 -1010-7 -1010-8 -1010-9 -1010-10 $55.00b 27.00b 48.00b 69.00b 80.00b 155.00b Series -1011 Female onnector Fitting Line -1011-1 -1011-2 -1011-3 -1011-4 -1011-5 -1011-6 -1011-7 -1011-8 -1011-9 -1011-11 G NU HX hread Male $ 25.00b 13.75b 16.00b 2 B BOY -1011-12 -1011-13 -1011-14 -1011-15 -1011-16 -1011-17 -1011-18 -1011-19 -1011-20 -1011-21 P PIP HR H BOY HX hread Male $17.75b 22.50b 4b 39.00b 39.00b SPIFIIONS emperature Ranges: See reference able B. Pressure Ranges: See reference able. onnections: to 1-. imensions: onsult website, or contact factory. -1011-22 -1011-23 -1011-24 -1011-25 -1011-26 -1011-27 -1011-28 -1011-29 1-1- hread Male 1-1- $35.00b 67.00b 79.00b 95.00b 160.00b 245.00b SSORIS & BOOKS LL O ORR: U.S. Phone 219 879-8000 U.K. Phone (+44) (0)1494-461707 ustralia Phone (+61) (0) 2 4272 2055 553