Ball Valves, Check Valves, and Swivels

Instructions -Parts List HIGH PRESSURE FLUI LINE Ball Valves, Check Valves, and Swivels 308ZAB EN Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. See page 3 for a List of Models, including Maximum Working Pressures. Model 247 Model 2057 Model 23835 Model 2083 Model 233 Model 23280 Model 2425

Table of Contents List of Models... 2 Warnings... 5 Ball Valve Operation/Service... TwoWayValveParts... 7 OneWayValveParts... 7 Check Valve Parts... 7 Swivel Parts... 8 Graco Standard Warranty... 20 Graco Information... 20 2 308

Two Way irector Valve List of Models Part No. Series Thread Size Seals 247 A /4 npt(mbe) fluoroelastomer One Way Ball Valves 7400 psi (5 MPa, 50 bar) Maximum Working Pressure Part No. Series Thread Size Seals 237303 A /4 npt(mbe) PTFE with PEEK seat 237304 A 3/8 npt(mbe) PTFE with PEEK seat 24580 A 3/8 npt(mbe) PTFE with PEEK seat 2458 A 3/8 npt(mbe) PTFE with PEEK seat 248875 A /4 npt(mbe) PTFE with PEEK seat 24887 A 3/8 npt(mbe) PTFE with PEEK seat One Way Ball Valves, Heavy uty Part No. Series Thread Size Seals 235573 B 3/8 npt(m) one end fluoroelastomer with Carbide seat 2374 A 3/8 npt(m) x /4 npt(m) fluoroelastomer with Carbide seat 2387 C 3/8 npt(m) x 3/8 npt(m) PTFE with PEEK seat 23280 A /4 npt(m) x /4 npt(m) fluoroelastomer with Carbide seat One Way Ball Valves Part No. Series Thread Size Seals 2057 B /4 npt(mbe) fluoroelastomer 2058 B 3/8 npt(mbe) fluoroelastomer 205 B 3/8 x /4 npt(mbe) fluoroelastomer 24037 B /4 npt(mbe) PTFE 280 A /4 nps(m) x 3/4 unf--2a PTFE 2235 A 3/8 x /4 npt(mbe) PTFE 2230 A 3/8 npt(mbe) PTFE 22444 A 3/8 npt(m) one end fluoroelastomer 2352 A 3/8 x /4 npt(mbe) PTFE, sst 2382 A 3/8 npt(mbe) fluoroelastomer 23835 A /4 npt(mbe) fluoroelastomer 2384 A 3/8 npt(mbe) PTFE, sst 2308 A /4 npt(mbe) PTFE, sst 24040 A 3/8 npt(mbe) PTFE, sst 2404 A /4 npt(mbe) PTFE, sst 24827 A /4 npt(mbe) PTFE, sst 24F07 A 3/8 npt(mbe) Flouroelastomer 308 3

List of Models Swivels 7400 psi (5 MPa, 50 bar) Maximum Working Pressure Part No. Series Thread Size Seals 2387 B /4 npsm(f) x /4 npsm(m) PTFE swivel Swivels Part No. Series Thread Size Seals 2425 -- 3/8 npt(f) x /4 npsm(f) swivel Leather 242 -- 3/8 npt(f) x /2 npsm(f) swivel Leather Check Valves 3000 psi (2 MPa, 20 bar) Maximum Working Pressure Part No. Series Thread Size Seals 2083 -- 3/8 npt(m) x 3/8 npsm(f) Nitrile rubber swivel 20833 -- 3/8 npt(m) x 3/8 npsm(f) 0_ swivel Nitrile rubber 202 -- 3/8 npt(mbe) Nitrile rubber Swivels 300 psi (25 MPa, 250 bar) Maximum Working Pressure Part No. Series Thread Size Seals 233 -- /4 npt(m) x /4 npsm(f) Leather swivel 22334 B /4 npt(m) x /4 npsm(f) swivel PTFE 4 308

Symbols Warning Symbol WARNING This symbol alerts you to the possibility of serious injury or death if you do not follow the instructions. Caution Symbol CAUTION This symbol alerts you to the possibility of damage to or destruction of equipment if you do not follow the instructions. INSTRUCTIONS WARNING EQUIPMENT MISUSE HAZAR Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury. This equipment is for professional use only. Read all instruction manuals, tags, and labels before operating the equipment. Use the equipment only for its intended purpose. If you are not sure, call your Graco distributor. o not alter or modify this equipment. Check equipment daily. Repair or replace worn or damaged parts immediately. o not repair high pressure couplings; you must replace the entire hose. o not exceed the maximum working pressure of the lowest rated system component. Refer to the charts on pages 3 and 4 for the maximum working pressure of this equipment. Use fluids and solvents which are compatible with the equipment wetted parts. Refer to the Technical ata section of all equipment manuals. Read the fluid and solvent manufacturer s warnings. Comply with all applicable local, state, and national fire, electrical, and safety regulations. SKIN INJECTION HAZAR Spray from the gun, leaks or ruptured components can inject fluid into your body and cause extremely serious injury, including the need for amputation. Fluid splashed in the eyes or on the skin can also cause serious injury. Fluid injected into the skin might look like just a cut, but it is a serious injury. Get immediate surgical treatment. Keep hands away from the end of the drain valve when opening it. o not stop or deflect leaks with your hand, body, glove or rag. Follow the Pressure Relief Procedure on page, before cleaning, checking or servicing the equipment. Tighten all fluid connections before operating the equipment. Fluid hoses must have spring guards on both ends, to help protect them from rupture caused by kinks or bends near the couplings. 308 5

Ball Valve Operation/Service Pressure Relief Procedure WARNING SKIN INJECTION HAZAR The system pressure must be manually relieved to prevent the system from starting or spraying accidentally. Fluid under high pressure can be injected through the skin and cause serious injury. To reduce the risk of an injury from injection, splashing fluid, or moving parts, follow the Pressure Relief Procedure whenever you: areinstructedtorelievethepressure, stop dispensing, check or service any of the system equipment, or install or clean dispensing devices.. Engage the spray gun safety latch and any other equipment safety locks. 2. Turn off the power to the pump. 3. isengage the gun safety latch and trigger the spray gun to relieve pressure. 4. Engage the spray gun safety latch and slowly open the system drain valve(s). Keep hands away from the end of the drain valve when opening it. 5. Leave the drain valve(s) open until you are ready to use the system again. WARNING Two-way director valves must be used only as ON/OFF valves. Never use them to throttle fluid flow, as this causes rapid wear of the valve. A worn valve may leak or fail to stay in the position (operate/drain) that you set it, unexpectedly allowing high pressure fluid into the closed off part of the system. This hazard can result in fluid injection or splashing in the eyes or on the skin. If the valve leaks fluid into the closed off part of the system, or if the valve handle is loose or does not hold its position firmly, replace the valve immediately. Two-Way irector Valve Thetwo-waydirectorvalveisusedtodirecthigh pressure fluids in either of two directions. It is commonly used in heated circulating systems to bleed trapped air and to direct unused, heated fluids back to the pump. It can also be used in multiple gun installations. Connect the fluid line to the /4 in. npt(m) inlet (marked IN ). irect the fluid to either outlet by turning the lever in the direction desired for flow. One-Way Valves The one-way valves are used as drain valves to relieve fluid pressure in spray systems. To open the valve, turn the lever parallel to the valve housing. To fully stop fluid flow through the valve, turn the lever 0_ to the valve housing. Valve Service Follow the Pressure Relief Procedure at left. Remove the valve from the line and disassemble it. Clean the parts and inspect them for wear or damage. Replace them as necessary. CAUTION o not wash fluoroelastomer o-rings in ketone thinners as these thinners cause the o-rings to deteriorate. Lubricate the o-ring seals and threaded parts with lithium base lubricant. Assemble the valve in the reverse order of disassembly (refer to the parts drawing for your model). When installing the lever on the valve, make sure the hole in the ball is aligned with the direction of the lever. 308

Model 247 /4 npt(mbe), fluoroelastomer seals Two Way Valve Parts n3 2070 LEVER, valve 2 2470 HOUSING, valve 3n 0230 NUT, hex; nylon cap; No. 0--32 4n 024 SEAL, o-ring; fluoroelastomer standard 2 0482 SEAL, o-ring; PTFE optional 2 5n 0242 SEAL, o-ring; fluoroelastomer standard 0483 SEAL, o-ring; PTFE optional n 400 WASHER, flat, nylon 2 7n 7204 SEAT, ball, nylon 2 8 5274 STU, valve; /4 npt(m) 2 n 54 NUT, packing 0n STEM, valve n 7008 BALL, valve 8 n7 n4 n n n0 n n5 2 8 4n 7n n Operating Mode To rain Line to Pump One Way Valve Parts rain Mode Operating Mode Line from Back Pressure Valve Model 2387, Series C 3/8 npt(m) x 3/8 npt(m), PTFE seals, PEEK seat 0230 NUT, hex; nylon cap; No. 0--32 2{ 0483 SEAL, o-ring; PTFE 3{ 0482 SEAL, o-ring; PTFE 2 4{ 400 WASHER, flat, nylon 2 5{ 88745 BALL, valve 7 54 NUT, packing 8 88742 STEM, valve 0 080 LEVER, valve 88828 HOUSING, valve 2{ 07 SEAT, ball 2 3 88743 NIPPLE, 3/8 npt(m) 2 4 277 WASHER, flat 7 207 GRIP, handle { These parts are included in Repair Kit 24047, which may 4 0 7 {4 8 {4 {2 5{ 3{ 2{ 7 3 3 2{ 3{ 308 7

Model 237303, Series A 7400 psi (5 MPa, 50 bar) Maximum Working Pressure /4 npt(mbe); PTFE seals, PEEK seat One Way Valve Parts Model 237304, Series A 7400 psi (5 MPa, 50 bar) Maximum Working Pressure 3/8 npt(mbe), PTFE seals, PEEK seat 2 Model 24580, Series A 7400 psi (5 MPa, 50 bar) Maximum Working Pressure 3/8 npt(mbe), PTFE seals, PEEK seat Model 2458, Series A 7400 psi (5 MPa, 50 bar) Maximum Working Pressure 3/8 npt(mbe), PTFE seals, PEEK seat Model 248875, Series A 7400 psi (5 MPa, 50 bar) Maximum Working Pressure /4 npt(mbe); PTFE seals, PEEK seat Model 24887, Series A 7400 psi (5 MPa, 50 bar) Maximum Working Pressure 3/8 npt(mbe), PTFE seals, PEEK seat, no lever n4 n0 n * Models 237303 and 237304 8* 3* 5* 5* 3* 2 080 LEVER, valve, (Models 237303 and 237304) 5A88 LEVER, valve, left hand (Model 24580, shown) 5A882 LEVER, valve, right hand 78747 LEVER, valve, (Model 248875) 2 78743 HOUSING, valve 3* 07 SEAT, ball, PEEK 2 4n 0230 NUT, hex; nylon cap; No. 0--32 (not on 24887) 5* 0482 SEAL, o-ring; PTFE 2 * 0483 SEAL, o-ring; PTFE 7* 400 WASHER, flat, nylon 2 8* 7874 BALL, valve 5274 STU, valve; /4 npt(m) Models 237303 and 248875 2 55 STU, valve; 3/8 npt(m) (Models 237304, 24580, 2458 and 24887) 2 0n 54 NUT, packing n 78745 STEM, valve 2 207 GRIP, handle (Models 237303 and 237304 only) n4 n0 n * Models 24580 and 2458 8* 3* 5* * These parts are included in Repair Kit 2377, which may 5* 3* 2 8 308

One Way Valve Parts Model 248875 n n8 {*4 n {*0 {*3 7 {*4 {*2 3*{ 0*{ 5*{ 2 Model 24887 n0 n * 8* 3* 5* 5* 3* 2 308

Model 2382, Series A 3/8 npt(mbe), fluoroelastomer seals Model 23835, Series A /4 npt(mbe), fluoroelastomer seals One Way Valve Parts 080 LEVER, valve 2 78743 HOUSING, valve 3* 7204 SEAT, ball, nylon 2 4n 0230 NUT, hex; nylon cap; No. 0--32 5* 024 SEAL, o-ring; fluoroelastomer 2 * 0242 SEAL, o-ring; fluoroelastomer 7* 400 WASHER, flat, nylon 2 8* 7874 BALL, valve 55 STU, valve; 3/8 npt(m) Model 2382 2 5274 STU, valve; /4 npt(m) Model 23835 2 0n 54 NUT, packing n 78745 STEM, valve 2 207 GRIP, handle * These parts are included in Repair Kit 2755, which may n4 n0 n * 8* 3* 5* 2 5* 3* 2 0 308

One Way Valve Parts Model 2374, Series A 3/8 npt(m) x /4 npt(m), fluoroelastomer seals, carbide seat 0230 NUT, hex; nylon cap; No. 0--32 2{ 0242 SEAL, o-ring; fluoroelastomer 3{ 024 SEAL, o-ring; fluoroelastomer 2 4{ 400 WASHER, flat, nylon 2 5{ 007 BALL, valve 008 STU, valve; 3/8 npt(m) 7 54 NUT, packing 8 873 STEM, valve { 22352 SEAT, ball, carbide 0 0083 LEVER, valve 78743 HOUSING, valve 2{ 7204 SEAT, ball 3 0338 NIPPLE, /4 npt(m) 4 277 WASHER, flat 3{ 2{ 5{ 4 0 7 4{ 8 4{ 2{ { 3{ { These parts are included in Repair Kit 2373, which may 3 04332 Model 23280, Series A /4 npt(m) x /4 npt(m), fluoroelastomer seals, carbide seat 0230 NUT, hex; nylon cap; No. 0--32 2{ 0242 SEAL, o-ring; fluoroelastomer 3{ 024 SEAL, o-ring; fluoroelastomer 2 4{ 400 WASHER, flat, nylon 2 5{ 007 BALL, valve 7 54 NUT, packing 8 873 STEM, valve { 22352 SEAT, ball, carbide 0 0083 LEVER, valve 78743 HOUSING, valve 2{ 7204 SEAT, ball 3 0338 NIPPLE, /4 npt(m) 2 4 277 WASHER, flat 3 0 3{ 2{ 5{ 4 7 4{ 8 4{ { These parts are included in Repair Kit 2373, which may 2{ { 3{ 3 308

Model 2057, Series B /4 npt(mbe), fluoroelastomer seals Model 2058, Series B; Model 24F07, Series A 3/8 npt(mbe), fluoroelastomer seals Model 2230, Series A 3/8 npt(mbe), PTFE seals 0230n NUT, hex; nylon cap; No. 0--32 2 0242{ SEAL, o-ring; fluoroelastomer Models 2058 & 2057 0483* SEAL, o-ring; PTFE Model 2230 3 024{ SEAL, o-ring; fluoroelastomer Models 2058 & 2057 2 0482* SEAL, o-ring; PTFE Model 2230 2 4 400*{ WASHER, flat, nylon 2 5 7874*{ BALL, valve 5274 STU, valve; /4 npt(m) Model 2057 2 55 STU, valve; 3/8 npt(m) F448 One Way Valve Parts Model 2058 & 2230 only 2 STU, valve, 3/8 npt(m) nickel plated Model 24F07 2 7 54n NUT, packing 2 8 78745n STEM, valve 7204*{ SEAT, ball, nylon 2 0 78747 LEVER, valve 78743 HOUSING, valve Models 2057, 2058, 2230 F447 HOUSING, valve, nickel plated Model 24F07 2 * These parts are included in Repair Kit 2750, which may { These parts are included in Repair Kit 2755, which may Model 205, Series B 3/8 npt(m) x /4 npt(m), fluoroelastomer seals Model 2235, Series A 3/8 npt(m) x /4 npt(m), PTFE seals 0230n NUT, hex; nylon cap; No. 0--32 2 0242{ SEAL, o-ring; fluoroelastomer Model 205 0483* SEAL, o-ring; PTFE Model 2235 3 024{ SEAL, o-ring; fluoroelastomer Model 205 2 0482* SEAL, o-ring; PTFE Model 2235 2 4 400*{ WASHER, flat, nylon 2 5 7874*{ BALL, valve 5274 STU, valve; /4 npt(m) 7 55 STU, valve; 3/8 npt(m) 8 54n NUT, packing 78745n STEM, valve 0 7204*{ SEAT, ball, nylon 2 78747 LEVER, valve 2 78743 HOUSING, valve * These parts are included in Repair Kit 2750, which may { These parts are included in Repair Kit 2755, which may n n 0 n7 {*4 n8 {*4 n8 {*4 {*2 n {* {*3 3*{ *{ 5*{ {*0 {*3 7 {*4 {*2 2 3*{ 0*{ 5*{ 2 308

One Way Valve Parts Model 2384, Series A 3/8 npt(mbe), PTFE seals, stainless steel Model 2352, Series A 3/8 npt(m) x /4 npt(m), PTFE seals, stainless steel Model 24827, Series A /4 npt(mbe), PTFE seals, stainless steel n n8 *4 n 0230 NUT, hex; nylon cap; No. 0--32 2 0483*{ SEAL, o-ring; PTFE 3 0482*{ SEAL, o-ring; PTFE 2 4 400*{ WASHER, flat, nylon 2 5 88745*{ BALL, valve STU, valve 88743 3/8 npt(m), Model 2384 88744 /4 npt(m), Model 2352, 24827 7 STU, valve 88743 3/8 npt(m) Model 2384 88744 /4 npt(m) Model 2352, 24827 8n 54 NUT, packing n 88742 STEM, valve 0 SEAT, ball, nylon 07{ Model 2384 2 7204* Model 2352, 24827 2 78747 LEVER, valve 2 88828 HOUSING, valve *0 *3 7 n *4 *2 2 3* 0* 5* * These parts are included in Repair Kit 2353, which may { These parts are included in Repair Kit 24047, which may 3 Model 2308, Series A /4 npt(mbe), PTFE seals, stainless steel n 0230 NUT, hex; nylon cap; No. 0--32 2* 0483 SEAL, o-ring; PTFE 3* 0482 SEAL, o-ring; PTFE 2 4* 400 WASHER, flat, nylon 2 5* 88745 BALL, valve 88744 STU, valve; /4 npt(m) 2 8n 54 NUT, packing n 88742 STEM, valve 0* 7204 SEAT, ball, nylon 2 080 LEVER, valve 2 88828 HOUSING, valve 3 207 GRIP, handle * These parts are included in Repair Kit 2353, which may n n8 *4 n *4 *2 0* 3* 2 5* 3* 0* 308 3

One Way Valve Parts Model 24040, Series A 3/8 npt(mbe), PTFE seals, carbide and PEEK seats, stainless steel n n 0230 NUT, hex; nylon cap; No. 0--32 2n 0483 SEAL, o-ring; PTFE 3n 0482 SEAL, o-ring; PTFE 2 4n 400 WASHER, flat, nylon 2 5n 377 BALL, valve 88743 STU, valve; 3/8 npt(m) 2 8n 54 NUT, packing n 378 STEM, valve 0n 07 SEAT, ball, PEEK 78747 LEVER, valve 2 88828 HOUSING, valve 7n 22352 SEAT, ball, carbide n8 n4 n n4 n2 5n 3n 7n 0n 3n 2 834A Model 2404, Series A /4 npt(mbe), PTFE seals, carbide and PEEK seats, stainless steel, without handle 2n 0483 SEAL, o-ring; PTFE 3n 0482 SEAL, o-ring; PTFE 2 4n 400 WASHER, flat, nylon 2 5n 377 BALL, valve 88744 STU, valve; /4 npt(m) 2 8n 54 NUT, packing n 378 STEM, valve 0n 07 SEAT, ball, PEEK 2 88828 HOUSING, valve 7n 22352 SEAT, ball, carbide n8 n4 n n4 n2 2 5n 3n 7n 0n 3n 8347A 4 308

One Way Valve Parts Model 280, Series A /4 npsm(m) x 3/4-- unf--2a, PTFE seals n4 78747 LEVER, valve 2 78743 HOUSING, valve 3* 7204 SEAT, ball, nylon 2 4n 0230 NUT, hex; nylon cap; No. 0--32 5* 0482 SEAL, o-ring; PTFE 2 * 0483 SEAL, o-ring; PTFE 7* 400 WASHER, flat, nylon 2 8* 7874 BALL, valve 8038 NIPPLE, adapter; 3/4-- unf--2a(m) 0n 54 NUT, packing n 78745 STEM, valve 2 8037 NIPPLE, adapter; /4--8 npsm(m) * These parts are included in Repair Kit 2750, which may *5 2 *3 n0 n * 2 3* 8* 5* Model 24037, Series B /4 npt(mbe), PTFE seals n4 78747 LEVER, valve 2 78743 HOUSING, valve 3* 7204 SEAT, ball, nylon 2 4n 0230 NUT, hex; nylon cap; No. 0--32 5* 0482 SEAL, o-ring; PTFE 2 * 0483 SEAL, o-ring; PTFE 7* 400 WASHER, flat, nylon 2 8* 7874 BALL, valve 5274 STU, valve; /4 npt(m) 2 0n 54 NUT, packing n 78745 STEM, valve * These parts are included in Repair Kit 2750, which may *5 *3 n0 n * 2 8* 5* 3* 308 5

One Way Valve Parts Model 22444 3/8 npt(m) one end, fluoroelastomer seals n 0 n 0230 NUT, hex; nylon cap; No. 0--32 2{ 0242 SEAL, o-ring; fluoroelastomer 3{ 024 SEAL, o-ring; fluoroelastomer 2 4{ 400 WASHER, flat, nylon 2 5{ 7874 BALL, valve 55 STU, valve; 3/8 npt(m) 7n 54 NUT, packing 8n 78745 STEM, valve { 7204 SEAT, ball, nylon 2 0 78747 LEVER, valve 78743 HOUSING, valve 3 870 AAPTER { These parts are included in Repair Kit 2755, which may 3 {3 { n7 {4 n8 {4 {2 5{ { 3{ Model 235573 3/8 npt(m) one end, fluoroelastomer seals, carbide seat n 0 n 0230 NUT, hex; nylon cap; No. 0--32 2{ 0242 SEAL, o-ring; fluoroelastomer 3{ 024 SEAL, o-ring; fluoroelastomer 2 4{ 400 WASHER, flat, nylon 2 5{ 5273 BALL, valve 5274 STU, valve; 3/8 npt(m) 7n 54 NUT, packing 8n 873 STEM, valve { 7204 SEAT, ball, nylon 2 0 78747 LEVER, valve 78743 HOUSING, valve 3 870 AAPTER { These parts are included in Repair Kit 2755, which may {3 3 { n7 {4 n8 {4 {2 5{ { 3{ 308

Check Valve Parts NOTE: To operate properly, the valve must be mounted in an upright position with the housing (Ref No. 3, below) facing up. CAUTION o not wash nitrile o-rings in aromatic thinners as these thinners cause the o-rings to deteriorate. Model 2083 3000 psi (2 MPa, 20 bar) Maximum Working Pressure 3/8 npt(m) x 3/8 npsm(f) swivel 20830 HOUSING, valve 2 0874 BALL, sst; 0.5 in. (3 mm) dia. 3 700 HOUSING, adapter 4 70 PIN 5n 702 O-RING; nitrile rubber Model 2083 4 3 5n 2 Model 20833 3000 psi (2 MPa, 20 bar) Maximum Working Pressure 3/8 npt(m) x 3/8 npsm(f) 0_ swivel Model 20833 4 3 20832 HOUSING, valve 2 0874 BALL, sst; 0.5 in. (3 mm) dia. 3 700 HOUSING, adapter 4 70 PIN 5n 702 O-RING; nitrile rubber 5n 2 Model 202 3000 psi (2 MPa, 20 bar) Maximum Working Pressure 3/8 npt(mbe) Model 202 4 3 20 HOUSING, valve 2 0874 BALL, sst; 0.5 in. (3 mm) dia. 3 700 HOUSING, adapter 4 70 PIN 5n 702 O-RING; nitrile rubber 2 5n 308 7

Swivel Parts NOTE: For other high pressure swivels, see instruction manual 307005. Model 233 300 psi (25 MPa, 250 bar) Maximum Working Pressure /4 npt(m) x /4 npsm(f) swivel, leather packings Model 22334 300 psi (25 MPa, 250 bar) Maximum Working Pressure /4 npt(m) x /4 npsm(f) swivel, PTFE packings 2 505*{ GLAN, male 3 50522 SPRING 4 5784*{ GLAN, female 5 888 HOUSING, swivel 24* V-PACKING, leather (Model 233) 4 8378{ V-PACKING, PTFE(Model 22334) 4 7 BOY not sold separately 7 {*4 {* {*2 Models 233 & 22334 3 5 * These parts are included in Repair Kit 20783, which may { These parts are included in Repair Kit 223342, which may Model 242 This swivel is not repairable /2 npsm(f) x 3/8 npt(f), leather packings. Model s2425 and 242 Model 2425 This swivel is not repairable /4 npsm(f) x 3/8 npt(f), leather packings. Model 2387 7400 psi (5 MPa, 50 bar) Maximum Working Pressure /4 npsm(f) x /4 npsm(m), PTFE seal Model 2387 7 4 2725 SEAL; PTFE 8 HOUSING, swivel 7 BOY not sold separately 4 8 308

Notes 308

Graco Standard Warranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco s written recommendations. This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non--graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco. This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does notdisclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation. THIS WARRANTY IS EXCLUSIVE, AN IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIE, INCLUING BUT NOT LIMITE TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. Graco s sole obligation and buyer s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale. Graco makes no warranty, and disclaims all implied warranties of merchantability and fitness for a particular purpose in connection with accessories, equipment, materials or components sold but not manufactured by Graco. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties. In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of Graco, or otherwise. FOR GRACO CANAA CUSTOMERS The parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés à la suite de ou en rapport, directement ou indirectement, avec les procedures concernées. Graco Information For the latest information about Graco products, visit www.graco.com. TO PLACE AN ORER, contact your Graco distributor or call to identify the distributor closest to you: Phone: 2--23--2 or Toll Free: --800--328--02 Fax: 2--378--3505 All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. 2ULJLQO,QVWUXFWLRQV This manual contains English. MM 308 Graco Headquarters: Minneapolis International Offices: Belgium, China, Japan, Korea GRACO INC. AN SUBSIIARIES P.O. BOX 44 MINNEAPOLIS, MN 55440-44 USA Copyright 3, Graco Inc. All Graco manufacturing locations are registered to ISO 00 www.graco.com Revised 08/20 20 308